| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140120134220.GA12050@gmail.com>
Date: Mon, 20 Jan 2014 14:42:20 +0100
From: Ingo Molnar <mingo@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, "H. Peter Anvin" <hpa@...or.com>,
Thomas Gleixner <tglx@...utronix.de>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: [GIT PULL] x86/apic changes for v3.14
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-apic-for-linus
# HEAD: 5b4d1dbc24bb6fd7179ada0f47be34e27e64decb x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
Two main changes:
- Improve local APIC Error Status Register reporting robustness.
- Add the 'disable_cpu_apicid=x' boot parameter for kexec booting.
Thanks,
Ingo
------------------>
H. Peter Anvin (1):
x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
HATAYAMA Daisuke (1):
x86, apic, kexec: Add disable_cpu_apicid kernel parameter
Richard Weinberger (1):
x86/apic: Read Error Status Register correctly
Documentation/kernel-parameters.txt | 9 +++++
arch/x86/kernel/apic/apic.c | 66 ++++++++++++++++++++++++++++++++-----
2 files changed, 66 insertions(+), 9 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b9e9bd8..6fdbf8c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -774,6 +774,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
disable= [IPV6]
See Documentation/networking/ipv6.txt.
+ disable_cpu_apicid= [X86,APIC,SMP]
+ Format: <int>
+ The number of initial APIC ID for the
+ corresponding CPU to be disabled at boot,
+ mostly used for the kdump 2nd kernel to
+ disable BSP to wake up multiple CPUs without
+ causing system reset or hang due to sending
+ INIT from AP to BSP.
+
disable_ddw [PPC/PSERIES]
Disable Dynamic DMA Window support. Use this if
to workaround buggy firmware.
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index d278736..7f26c9a 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -75,6 +75,13 @@ unsigned int max_physical_apicid;
physid_mask_t phys_cpu_present_map;
/*
+ * Processor to be disabled specified by kernel parameter
+ * disable_cpu_apicid=<int>, mostly used for the kdump 2nd kernel to
+ * avoid undefined behaviour caused by sending INIT from AP to BSP.
+ */
+static unsigned int disabled_cpu_apicid __read_mostly = BAD_APICID;
+
+/*
* Map cpu index to physical APIC ID
*/
DEFINE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_cpu_to_apicid, BAD_APICID);
@@ -1968,7 +1975,7 @@ __visible void smp_trace_spurious_interrupt(struct pt_regs *regs)
*/
static inline void __smp_error_interrupt(struct pt_regs *regs)
{
- u32 v0, v1;
+ u32 v;
u32 i = 0;
static const char * const error_interrupt_reason[] = {
"Send CS error", /* APIC Error Bit 0 */
@@ -1982,21 +1989,20 @@ static inline void __smp_error_interrupt(struct pt_regs *regs)
};
/* First tickle the hardware, only then report what went on. -- REW */
- v0 = apic_read(APIC_ESR);
apic_write(APIC_ESR, 0);
- v1 = apic_read(APIC_ESR);
+ v = apic_read(APIC_ESR);
ack_APIC_irq();
atomic_inc(&irq_err_count);
- apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)",
- smp_processor_id(), v0 , v1);
+ apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x",
+ smp_processor_id(), v);
- v1 = v1 & 0xff;
- while (v1) {
- if (v1 & 0x1)
+ v &= 0xff;
+ while (v) {
+ if (v & 0x1)
apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
i++;
- v1 >>= 1;
+ v >>= 1;
}
apic_printk(APIC_DEBUG, KERN_CONT "\n");
@@ -2115,6 +2121,39 @@ int generic_processor_info(int apicid, int version)
phys_cpu_present_map);
/*
+ * boot_cpu_physical_apicid is designed to have the apicid
+ * returned by read_apic_id(), i.e, the apicid of the
+ * currently booting-up processor. However, on some platforms,
+ * it is temporarily modified by the apicid reported as BSP
+ * through MP table. Concretely:
+ *
+ * - arch/x86/kernel/mpparse.c: MP_processor_info()
+ * - arch/x86/mm/amdtopology.c: amd_numa_init()
+ * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info()
+ *
+ * This function is executed with the modified
+ * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel
+ * parameter doesn't work to disable APs on kdump 2nd kernel.
+ *
+ * Since fixing handling of boot_cpu_physical_apicid requires
+ * another discussion and tests on each platform, we leave it
+ * for now and here we use read_apic_id() directly in this
+ * function, generic_processor_info().
+ */
+ if (disabled_cpu_apicid != BAD_APICID &&
+ disabled_cpu_apicid != read_apic_id() &&
+ disabled_cpu_apicid == apicid) {
+ int thiscpu = num_processors + disabled_cpus;
+
+ pr_warning("APIC: Disabling requested cpu."
+ " Processor %d/0x%x ignored.\n",
+ thiscpu, apicid);
+
+ disabled_cpus++;
+ return -ENODEV;
+ }
+
+ /*
* If boot cpu has not been detected yet, then only allow upto
* nr_cpu_ids - 1 processors and keep one slot free for boot cpu
*/
@@ -2592,3 +2631,12 @@ static int __init lapic_insert_resource(void)
* that is using request_resource
*/
late_initcall(lapic_insert_resource);
+
+static int __init apic_set_disabled_cpu_apicid(char *arg)
+{
+ if (!arg || !get_option(&arg, &disabled_cpu_apicid))
+ return -EINVAL;
+
+ return 0;
+}
+early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists