[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1390227091-4523-9-git-send-email-rogerq@ti.com>
Date: Mon, 20 Jan 2014 16:11:29 +0200
From: Roger Quadros <rogerq@...com>
To: <bcousson@...libre.com>, <tony@...mide.com>
CC: <balbi@...com>, <lee.jones@...aro.org>, <arnd@...db.de>,
<sre@...ian.org>, <mark.rutland@....com>,
<m.paolino@...tualopensystems.com>, <linux-omap@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Roger Quadros <rogerq@...com>
Subject: [PATCH v6 08/10] ARM: dts: omap4-panda: Provide USB PHY clock
The USB PHY gets its clock from AUXCLK3. Provide this
information.
Signed-off-by: Roger Quadros <rogerq@...com>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05..50b72966 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -83,12 +83,8 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
vcc-supply = <&hsusb1_power>;
- /**
- * FIXME:
- * put the right clock phandle here when available
- * clocks = <&auxclk3>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists