| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1390361452-3124-1-git-send-email-marc.ceeeee@gmail.com> Date: Tue, 21 Jan 2014 19:30:44 -0800 From: Marc Carino <marc.ceeeee@...il.com> To: Christian Daudt <bcm@...thebug.org>, Arnd Bergmann <arnd@...db.de> Cc: Florian Fainelli <f.fainelli@...il.com>, Matt Porter <matt.porter@...aro.org>, Russell King <linux@....linux.org.uk>, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, devicetree@...r.kernel.org, Marc Carino <marc.ceeeee@...il.com> Subject: [PATCH v5 0/8] ARM: brcmstb: Add Broadcom STB SoC support This patchset contains the board support package for the Broadcom BCM7445 ARM-based SoC [1]. These changes contain a minimal set of code needed for a BCM7445-based board to boot the Linux kernel. These changes heavily leverage the OF/devicetree framework. v5: - rebased to v3.13 tag - make UART DT node a child of 'rdb' node - fix ordering of debug UART entries v4: - make a reboot driver and put it in the drivers folder - rework DT bindings to leverage 'syscon' - rework BSP code to use 'syscon' for all register mappings - misc. tweaks per suggestions from v3 v3: - rebased to v3.13-rc8 - switched to using 'multi_v7_defconfig' - eliminated dependence on compile-time peripheral register access - moved DT node iomap out from 'init_early' - misc. minor cleanups from mailing-list discussion for v2 v2: - rebased to v3.13-rc1 - moved implementation to 'mach-bcm' folder - added CPU init for B15 v1: - initial submission [1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445 Marc Carino (8): ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs power: reset: Add reboot driver for brcmstb ARM: brcmstb: add debug UART for earlyprintk support ARM: do CPU-specific init for Broadcom Brahma15 cores ARM: brcmstb: add CPU binding for Broadcom Brahma15 ARM: brcmstb: add misc. DT bindings for brcmstb ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 ARM: brcmstb: dts: add a reference DTS for Broadcom 7445 .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + Documentation/devicetree/bindings/arm/gic.txt | 1 + arch/arm/Kconfig.debug | 16 +- arch/arm/boot/dts/bcm7445.dts | 111 +++++++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-bcm/Kconfig | 14 + arch/arm/mach-bcm/Makefile | 4 + arch/arm/mach-bcm/brcmstb.c | 110 +++++++ arch/arm/mach-bcm/brcmstb.h | 38 +++ arch/arm/mach-bcm/headsmp-brcmstb.S | 34 ++ arch/arm/mach-bcm/hotplug-brcmstb.c | 334 ++++++++++++++++++++ arch/arm/mm/proc-v7.S | 11 + drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/brcmstb-reboot.c | 120 +++++++ 16 files changed, 900 insertions(+), 1 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt create mode 100644 arch/arm/boot/dts/bcm7445.dts create mode 100644 arch/arm/mach-bcm/brcmstb.c create mode 100644 arch/arm/mach-bcm/brcmstb.h create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c create mode 100644 drivers/power/reset/brcmstb-reboot.c -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists