[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACUGKYMwFVKqQAVoXkE8vgzYXQXnZYtsYeHEDY20XiqcT-Drnw@mail.gmail.com>
Date: Wed, 22 Jan 2014 19:25:42 -0800
From: John Tobias <john.tobias.ph@...il.com>
To: Fabio Estevam <festevam@...il.com>
Cc: Russell King - ARM Linux <linux@....linux.org.uk>,
Dong Aisheng <b29396@...escale.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"<linux-kernel@...r.kernel.org>" <linux-kernel@...r.kernel.org>,
"<linux-arm-kernel@...ts.infradead.org>"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: Internal error: Oops: 17 [#1] ARM
Hi Fabio,
Attached are the two patch files that I applied in the 3.13 released
so that the kernel will detect my eMMC in DDR50.
(let me correct my previous email, I was mentioning SDR50 but it
should be DDR50).
eMMC info:
clock: 52000000 Hz
actual clock: 49500000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 1 (mmc high-speed)
signal voltage: 0 (3.30 V)
I reboot my device often and it shows during the reboot.
Regards,
john
On Wed, Jan 22, 2014 at 6:28 PM, Fabio Estevam <festevam@...il.com> wrote:
> On Wed, Jan 22, 2014 at 9:49 PM, John Tobias <john.tobias.ph@...il.com> wrote:
>> Hello all,
>>
>> Just to confirm that the error I posted previously exist in 3.13
>> released. Just be noted that some patches related to eMMC/sdhci has
>> been applied in order to boot the 3.13 on my board.
>> Addition to that, I was getting additional errors (please see below):
>> - It happened during the reboot.
>>
>> Cc'ng Dong Aisheng.
>
> What are the steps to reproduce this? Which SoC are you using?
>
> Regards,
>
> Fabio Estevam
Download attachment "sdhci-esdhc-imx.patch" of type "application/octet-stream" (2464 bytes)
Download attachment "sdhci.patch" of type "application/octet-stream" (2522 bytes)
Powered by blists - more mailing lists