| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1390553044-11860-9-git-send-email-geert@linux-m68k.org>
Date: Fri, 24 Jan 2014 09:43:58 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Mark Brown <broonie@...nel.org>
Cc: linux-spi@...r.kernel.org, linux-sh@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
Subject: [PATCH v3 08/14] spi: rspi: Add support for more than one interrupt
From: Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
Add support for multiple interrupts, based on the SDK reference code.
This is needed for RZ/A1H, which supports 3 interrupts.
When using multiple interrupts, they must be called "rx" (SPRI) and "tx"
(SPTI). The error interrupt (SPEI) is not used, as it matters for slave
mode only.
When using a single interrupt, it may be called "mux". If it cannot be
found, the first interrupt in the device's resources will be used.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
---
v2:
- s/irq[]/irqs[]/
- s/numirq/num_irqs/
- Use unsigned int for loop counters that cannot be negative
- Merge the platform_get_irq() and devm_request_irq() loops
- Do not update copyright header in further untouched rspi.h
v3:
- Do not request the unused error interrupt
- Add suffixes ":mux", ":rx" and ":tx" to the registered interrupt names
- Use named interrupts
drivers/spi/spi-rspi.c | 106 +++++++++++++++++++++++++++++++++++++++---------
1 file changed, 87 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 5d39cd3eba62..d2ade5e09f58 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1,7 +1,7 @@
/*
* SH RSPI driver
*
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012, 2013 Renesas Solutions Corp.
*
* Based on spi-sh.c:
* Copyright (C) 2011 Renesas Solutions Corp.
@@ -183,12 +183,12 @@ struct rspi_data {
struct clk *clk;
u8 spsr;
u16 spcmd;
+ int rx_irq, tx_irq;
const struct spi_ops *ops;
/* for dmaengine */
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
- int irq;
unsigned dma_width_16bit:1;
unsigned dma_callbacked:1;
@@ -440,7 +440,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
struct scatterlist sg;
const void *buf = NULL;
struct dma_async_tx_descriptor *desc;
- unsigned len;
+ unsigned int len;
int ret = 0;
if (rspi->dma_width_16bit) {
@@ -478,7 +478,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
* DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
*/
- disable_irq(rspi->irq);
+ disable_irq(rspi->tx_irq);
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR);
rspi_enable_irq(rspi, SPCR_SPTIE);
@@ -497,7 +497,7 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
ret = -ETIMEDOUT;
rspi_disable_irq(rspi, SPCR_SPTIE);
- enable_irq(rspi->irq);
+ enable_irq(rspi->tx_irq);
end:
rspi_dma_unmap_sg(&sg, rspi->chan_tx, DMA_TO_DEVICE);
@@ -536,7 +536,7 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
struct scatterlist sg, sg_dummy;
void *dummy = NULL, *rx_buf = NULL;
struct dma_async_tx_descriptor *desc, *desc_dummy;
- unsigned len;
+ unsigned int len;
int ret = 0;
if (rspi->dma_width_16bit) {
@@ -594,7 +594,9 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
* DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
*/
- disable_irq(rspi->irq);
+ disable_irq(rspi->tx_irq);
+ if (rspi->rx_irq != rspi->tx_irq)
+ disable_irq(rspi->rx_irq);
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR);
rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
@@ -617,7 +619,9 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
ret = -ETIMEDOUT;
rspi_disable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
- enable_irq(rspi->irq);
+ enable_irq(rspi->tx_irq);
+ if (rspi->rx_irq != rspi->tx_irq)
+ enable_irq(rspi->rx_irq);
end:
rspi_dma_unmap_sg(&sg, rspi->chan_rx, DMA_FROM_DEVICE);
@@ -775,7 +779,7 @@ static int rspi_unprepare_message(struct spi_master *master,
return 0;
}
-static irqreturn_t rspi_irq(int irq, void *_sr)
+static irqreturn_t rspi_irq_mux(int irq, void *_sr)
{
struct rspi_data *rspi = _sr;
u8 spsr;
@@ -797,6 +801,36 @@ static irqreturn_t rspi_irq(int irq, void *_sr)
return ret;
}
+static irqreturn_t rspi_irq_rx(int irq, void *_sr)
+{
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
+
+ rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPRF) {
+ rspi_disable_irq(rspi, SPCR_SPRIE);
+ wake_up(&rspi->wait);
+ return IRQ_HANDLED;
+ }
+
+ return 0;
+}
+
+static irqreturn_t rspi_irq_tx(int irq, void *_sr)
+{
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
+
+ rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
+ if (spsr & SPSR_SPTEF) {
+ rspi_disable_irq(rspi, SPCR_SPTIE);
+ wake_up(&rspi->wait);
+ return IRQ_HANDLED;
+ }
+
+ return 0;
+}
+
static int rspi_request_dma(struct rspi_data *rspi,
struct platform_device *pdev)
{
@@ -868,12 +902,25 @@ static int rspi_remove(struct platform_device *pdev)
return 0;
}
+static int rspi_request_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, const char *suffix,
+ void *dev_id)
+{
+ const char *base = dev_name(dev);
+ size_t len = strlen(base) + strlen(suffix) + 2;
+ char *name = devm_kzalloc(dev, len, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+ snprintf(name, len, "%s:%s", base, suffix);
+ return devm_request_irq(dev, irq, handler, 0, name, dev_id);
+}
+
static int rspi_probe(struct platform_device *pdev)
{
struct resource *res;
struct spi_master *master;
struct rspi_data *rspi;
- int ret, irq;
+ int ret;
char clk_name[16];
const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
const struct spi_ops *ops;
@@ -886,12 +933,6 @@ static int rspi_probe(struct platform_device *pdev)
return -ENODEV;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "platform_get_irq error\n");
- return -ENODEV;
- }
-
master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
if (master == NULL) {
dev_err(&pdev->dev, "spi_alloc_master error.\n");
@@ -934,14 +975,41 @@ static int rspi_probe(struct platform_device *pdev)
master->unprepare_message = rspi_unprepare_message;
master->mode_bits = SPI_CPHA | SPI_CPOL;
- ret = devm_request_irq(&pdev->dev, irq, rspi_irq, 0,
- dev_name(&pdev->dev), rspi);
+ ret = platform_get_irq_byname(pdev, "rx");
+ if (ret < 0) {
+ ret = platform_get_irq_byname(pdev, "mux");
+ if (ret < 0)
+ ret = platform_get_irq(pdev, 0);
+ if (ret >= 0)
+ rspi->rx_irq = rspi->tx_irq = ret;
+ } else {
+ rspi->rx_irq = ret;
+ ret = platform_get_irq_byname(pdev, "tx");
+ if (ret >= 0)
+ rspi->tx_irq = ret;
+ }
+ if (ret < 0) {
+ dev_err(&pdev->dev, "platform_get_irq error\n");
+ goto error2;
+ }
+
+ if (rspi->rx_irq == rspi->tx_irq) {
+ /* Single multiplexed interrupt */
+ ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux,
+ "mux", rspi);
+ } else {
+ /* Multi-interrupt mode, only SPRI and SPTI are used */
+ ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx,
+ "rx", rspi);
+ if (!ret)
+ ret = rspi_request_irq(&pdev->dev, rspi->tx_irq,
+ rspi_irq_tx, "tx", rspi);
+ }
if (ret < 0) {
dev_err(&pdev->dev, "request_irq error\n");
goto error2;
}
- rspi->irq = irq;
ret = rspi_request_dma(rspi, pdev);
if (ret < 0) {
dev_err(&pdev->dev, "rspi_request_dma failed.\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists