early console in setup code early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-04758-gabcab52 (kbuild@roam) (gcc version 4.8.1 (Debian 4.8.1-8) ) #159 Wed Jan 22 19:02:44 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x03bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e000000-0x0e3fffff] [ 0.000000] [mem 0x0e000000-0x0e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0dffffff] [ 0.000000] [mem 0x08000000-0x0dffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x07ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0fffdfff] [ 0.000000] [mem 0x0e400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x0379e000, 0x0379efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x0e7ab000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 000040 [ 0.000000] ACPI: SSDT 0ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [623931.345674] BRK [0x0379f000, 0x0379ffff] PGTABLE [623931.346030] Zone ranges: [623931.346226] DMA [mem 0x00001000-0x00ffffff] [623931.346594] Normal [mem 0x01000000-0x0fffdfff] [623931.346960] HighMem empty [623931.347179] Movable zone start for each node [623931.347497] Early memory node ranges [623931.347766] node 0: [mem 0x00001000-0x0009efff] [623931.348136] node 0: [mem 0x00100000-0x0fffdfff] [623931.348497] On node 0 totalpages: 65436 [623931.350280] free_area_init_node: node 0, pgdat c2e7ff5c, node_mem_map ce5ab020 [623931.350821] DMA zone: 32 pages used for memmap [623931.351176] DMA zone: 0 pages reserved [623931.351470] DMA zone: 3998 pages, LIFO batch:0 [623931.351877] Normal zone: 480 pages used for memmap [623931.352260] Normal zone: 61438 pages, LIFO batch:15 [623931.353414] Using APIC driver default [623931.354010] ACPI: PM-Timer IO Port: 0xb008 [623931.354322] ACPI: Local APIC address 0xfee00000 [623931.354661] mapped APIC to ffffb000 ( fee00000) [623931.355105] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [623931.355541] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [623931.355979] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [623931.356574] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [623931.357009] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [623931.357502] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [623931.358020] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [623931.358494] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [623931.359035] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [623931.359529] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [623931.360068] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [623931.360557] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [623931.361095] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [623931.361595] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [623931.362133] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [623931.362637] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [623931.363182] ACPI: IRQ0 used by override. [623931.363479] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [623931.364017] ACPI: IRQ2 used by override. [623931.364310] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [623931.364847] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [623931.365377] ACPI: IRQ5 used by override. [623931.365672] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [623931.366213] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [623931.366750] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [623931.367291] ACPI: IRQ9 used by override. [623931.367585] ACPI: IRQ10 used by override. [623931.367885] ACPI: IRQ11 used by override. [623931.368192] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [623931.368720] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [623931.369260] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [623931.369794] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [623931.370338] Using ACPI (MADT) for SMP configuration information [623931.370782] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [623931.371184] mapped IOAPIC to ffffa000 (fec00000) [623931.371529] nr_irqs_gsi: 40 [623931.371750] KVM setup async PF for cpu 0 [623931.372055] kvm-stealtime: cpu 0, msr 2ad3600 [623931.372399] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [623931.372905] Booting paravirtualized kernel on KVM [623931.373321] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [623931.373738] pcpu-alloc: [0] 0 [623931.373988] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64924 [623931.374593] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r1-0122/linux-devel:devel-roam-i386-201401221837/.vmlinuz-abcab52cfba54e0e3b19d88eab7e9d340593b987-20140122190414-2-inn branch=linux-devel/devel-roam-i386-201401221837 BOOT_IMAGE=/kernel/i386-randconfig-r1-0122/abcab52cfba54e0e3b19d88eab7e9d340593b987/vmlinuz-3.13.0-04758-gabcab52 [623931.378920] PID hash table entries: 1024 (order: 0, 4096 bytes) [623931.379476] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [623931.380136] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [623931.380700] Initializing CPU#0 [623931.380956] Initializing HighMem for node 0 (00000000:00000000) [623931.381986] Memory: 193932K/261744K available (22303K kernel code, 4154K rwdata, 4916K rodata, 944K init, 8124K bss, 67812K reserved, 0K highmem) [623931.382999] virtual kernel memory layout: [623931.382999] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [623931.382999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [623931.382999] vmalloc : 0xd07fe000 - 0xff7fe000 ( 752 MB) [623931.382999] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [623931.382999] .init : 0xc2eb3000 - 0xc2f9f000 ( 944 kB) [623931.382999] .data : 0xc25c82ad - 0xc2eb2920 (9129 kB) [623931.382999] .text : 0xc1000000 - 0xc25c82ad (22304 kB) [623931.386382] Checking if this processor honours the WP bit even in supervisor mode...Ok. [623931.387175] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [623931.387713] NR_IRQS:2304 nr_irqs:256 16 [623931.388110] CPU 0 irqstacks, hard=ce00a000 soft=ce00c000 [623931.405045] Console: colour VGA+ 80x25 [623931.405340] console [tty0] enabled [623931.405722] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.13.0-04758-gabcab52 (kbuild@roam) (gcc version 4.8.1 (Debian 4.8.1-8) ) #159 Wed Jan 22 19:02:44 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x03bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e000000-0x0e3fffff] [ 0.000000] [mem 0x0e000000-0x0e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0dffffff] [ 0.000000] [mem 0x08000000-0x0dffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x07ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0fffdfff] [ 0.000000] [mem 0x0e400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x0379e000, 0x0379efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x0e7ab000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 000040 [ 0.000000] ACPI: SSDT 0ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [623931.345674] BRK [0x0379f000, 0x0379ffff] PGTABLE [623931.346030] Zone ranges: [623931.346226] DMA [mem 0x00001000-0x00ffffff] [623931.346594] Normal [mem 0x01000000-0x0fffdfff] [623931.346960] HighMem empty [623931.347179] Movable zone start for each node [623931.347497] Early memory node ranges [623931.347766] node 0: [mem 0x00001000-0x0009efff] [623931.348136] node 0: [mem 0x00100000-0x0fffdfff] [623931.348497] On node 0 totalpages: 65436 [623931.350280] free_area_init_node: node 0, pgdat c2e7ff5c, node_mem_map ce5ab020 [623931.350821] DMA zone: 32 pages used for memmap [623931.351176] DMA zone: 0 pages reserved [623931.351470] DMA zone: 3998 pages, LIFO batch:0 [623931.351877] Normal zone: 480 pages used for memmap [623931.352260] Normal zone: 61438 pages, LIFO batch:15 [623931.353414] Using APIC driver default [623931.354010] ACPI: PM-Timer IO Port: 0xb008 [623931.354322] ACPI: Local APIC address 0xfee00000 [623931.354661] mapped APIC to ffffb000 ( fee00000) [623931.355105] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [623931.355541] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [623931.355979] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [623931.356574] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [623931.357009] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [623931.357502] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [623931.358020] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [623931.358494] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [623931.359035] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [623931.359529] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [623931.360068] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [623931.360557] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [623931.361095] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [623931.361595] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [623931.362133] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [623931.362637] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [623931.363182] ACPI: IRQ0 used by override. [623931.363479] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [623931.364017] ACPI: IRQ2 used by override. [623931.364310] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [623931.364847] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [623931.365377] ACPI: IRQ5 used by override. [623931.365672] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [623931.366213] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [623931.366750] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [623931.367291] ACPI: IRQ9 used by override. [623931.367585] ACPI: IRQ10 used by override. [623931.367885] ACPI: IRQ11 used by override. [623931.368192] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [623931.368720] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [623931.369260] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [623931.369794] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [623931.370338] Using ACPI (MADT) for SMP configuration information [623931.370782] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [623931.371184] mapped IOAPIC to ffffa000 (fec00000) [623931.371529] nr_irqs_gsi: 40 [623931.371750] KVM setup async PF for cpu 0 [623931.372055] kvm-stealtime: cpu 0, msr 2ad3600 [623931.372399] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [623931.372905] Booting paravirtualized kernel on KVM [623931.373321] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [623931.373738] pcpu-alloc: [0] 0 [623931.373988] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64924 [623931.374593] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r1-0122/linux-devel:devel-roam-i386-201401221837/.vmlinuz-abcab52cfba54e0e3b19d88eab7e9d340593b987-20140122190414-2-inn branch=linux-devel/devel-roam-i386-201401221837 BOOT_IMAGE=/kernel/i386-randconfig-r1-0122/abcab52cfba54e0e3b19d88eab7e9d340593b987/vmlinuz-3.13.0-04758-gabcab52 [623931.378920] PID hash table entries: 1024 (order: 0, 4096 bytes) [623931.379476] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [623931.380136] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [623931.380700] Initializing CPU#0 [623931.380956] Initializing HighMem for node 0 (00000000:00000000) [623931.381986] Memory: 193932K/261744K available (22303K kernel code, 4154K rwdata, 4916K rodata, 944K init, 8124K bss, 67812K reserved, 0K highmem) [623931.382999] virtual kernel memory layout: [623931.382999] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [623931.382999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [623931.382999] vmalloc : 0xd07fe000 - 0xff7fe000 ( 752 MB) [623931.382999] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [623931.382999] .init : 0xc2eb3000 - 0xc2f9f000 ( 944 kB) [623931.382999] .data : 0xc25c82ad - 0xc2eb2920 (9129 kB) [623931.382999] .text : 0xc1000000 - 0xc25c82ad (22304 kB) [623931.386382] Checking if this processor honours the WP bit even in supervisor mode...Ok. [623931.387175] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [623931.387713] NR_IRQS:2304 nr_irqs:256 16 [623931.388110] CPU 0 irqstacks, hard=ce00a000 soft=ce00c000 [623931.405045] Console: colour VGA+ 80x25 [623931.405340] console [tty0] enabled [623931.405722] bootconsole [earlyser0] disabled [623931.474581] console [ttyS0] enabled [623931.475239] hpet clockevent registered [623931.475759] tsc: Detected 2693.542 MHz processor [623931.476301] Calibrating delay loop (skipped) preset value.. 5387.08 BogoMIPS (lpj=26935420) [623931.477274] pid_max: default: 32768 minimum: 301 [623931.477921] Security Framework initialized [623931.478419] AppArmor: AppArmor initialized [623931.478932] Mount-cache hash table entries: 512 [623931.479914] Initializing cgroup subsys debug [623931.480413] Initializing cgroup subsys perf_event [623931.481324] Initializing cgroup subsys net_prio [623931.482355] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [623931.482355] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [623931.482355] tlb_flushall_shift: 6 [623931.484942] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [623931.490114] ACPI: Core revision 20131115 [623931.499898] ACPI: All ACPI Tables successfully acquired [623931.501161] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [623931.506475] Enabling APIC mode: Flat. Using 1 I/O APICs [623931.507428] Getting VERSION: 50014 [623931.508236] Getting VERSION: 50014 [623931.508994] Getting ID: 0 [623931.509725] Getting ID: f000000 [623931.510461] Getting LVT0: 8700 [623931.511181] Getting LVT1: 8400 [623931.511951] enabled ExtINT on CPU#0 [623931.513448] ENABLING IO-APIC IRQs [623931.514252] init IO_APIC IRQs [623931.515013] apic 0 pin 0 not connected [623931.515841] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [623931.517463] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [623931.519092] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [623931.520673] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [623931.522376] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [623931.523973] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [623931.525680] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [623931.527286] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [623931.528848] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [623931.530481] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [623931.532090] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [623931.533709] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [623931.535363] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [623931.536990] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [623931.538649] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [623931.540256] apic 0 pin 16 not connected [623931.541071] apic 0 pin 17 not connected [623931.541877] apic 0 pin 18 not connected [623931.542686] apic 0 pin 19 not connected [623931.543510] apic 0 pin 20 not connected [623931.544326] apic 0 pin 21 not connected [623931.545141] apic 0 pin 22 not connected [623931.546018] apic 0 pin 23 not connected [623931.546968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [623931.548080] Using local APIC timer interrupts. [623931.548080] calibrating APIC timer ... [623931.665278] ... lapic delta = 6249837 [623931.666126] ... PM-Timer delta = 357946 [623931.666992] ... PM-Timer result ok [623931.667798] ..... delta 6249837 [623931.668585] ..... mult: 268428455 [623931.669391] ..... calibration result: 9999739 [623931.670305] ..... CPU clock speed is 2693.3862 MHz. [623931.671277] ..... host bus clock speed is 999.9739 MHz. [623931.672974] devtmpfs: initialized [623931.674137] gcov: version magic: 0x3430382a [623931.676933] pinctrl core: initialized pinctrl subsystem [623931.678244] regulator-dummy: no parameters [623931.679332] NET: Registered protocol family 16 [623931.681497] cpuidle: using governor ladder [623931.682409] cpuidle: using governor menu [623931.683959] ACPI: bus type PCI registered [623931.684883] PCI: Using configuration type 1 for base access [623931.713290] bio: create slab at 0 [623931.714726] ACPI: Added _OSI(Module Device) [623931.715634] ACPI: Added _OSI(Processor Device) [623931.716574] ACPI: Added _OSI(3.0 _SCP Extensions) [623931.717530] ACPI: Added _OSI(Processor Aggregator Device) [623931.731356] ACPI: Interpreter enabled [623931.732229] ACPI: (supports S0 S5) [623931.733079] ACPI: Using IOAPIC for interrupt routing [623931.734140] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [623931.738097] ACPI: No dock devices found. [623931.766357] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [623931.767510] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [623931.768632] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [623931.770934] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [623931.773166] PCI host bridge to bus 0000:00 [623931.774075] pci_bus 0000:00: root bus resource [bus 00-ff] [623931.775127] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [623931.776253] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [623931.777386] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [623931.778589] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [623931.779826] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [623931.781611] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [623931.783539] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [623931.787361] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [623931.790025] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [623931.791372] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [623931.793032] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [623931.795187] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [623931.799744] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [623931.802288] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [623931.809638] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [623931.811811] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [623931.814081] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [623931.816228] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [623931.822363] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [623931.824137] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [623931.826296] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [623931.828360] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [623931.835225] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [623931.837388] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [623931.839465] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [623931.846314] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [623931.848468] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [623931.850530] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [623931.857348] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [623931.859512] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [623931.861587] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [623931.868418] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [623931.870567] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [623931.872645] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [623931.879464] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [623931.881623] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [623931.883720] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [623931.890513] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [623931.892165] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [623931.897041] pci_bus 0000:00: on NUMA node 0 [623931.899874] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [623931.901806] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [623931.903728] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [623931.905625] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [623931.907218] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [623931.909983] ACPI: Enabled 16 GPEs in block 00 to 0F [623931.911109] ACPI: \_SB_.PCI0: notify handler is installed [623931.912385] Found 1 acpi root devices [623931.915057] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [623931.916812] vgaarb: loaded [623931.917550] vgaarb: bridge control possible 0000:00:02.0 [623931.919760] ACPI: bus type USB registered [623931.920769] usbcore: registered new interface driver usbfs [623931.921884] usbcore: registered new interface driver hub [623931.923032] usbcore: registered new device driver usb [623931.924457] Linux video capture interface: v2.00 [623931.925464] pps_core: LinuxPPS API ver. 1 registered [623931.926456] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [623931.928309] PTP clock support registered [623931.929499] wmi: Mapper loaded [623931.930411] Advanced Linux Sound Architecture Driver Initialized. [623931.931529] PCI: Using ACPI for IRQ routing [623931.932453] PCI: pci_cache_line_size set to 64 bytes [623931.933607] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [623931.935073] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [623931.937317] Bluetooth: Core ver 2.18 [623931.938223] NET: Registered protocol family 31 [623931.939154] Bluetooth: HCI device and connection manager initialized [623931.940309] Bluetooth: HCI socket layer initialized [623931.941316] Bluetooth: L2CAP socket layer initialized [623931.942357] Bluetooth: SCO socket layer initialized [623931.943356] NET: Registered protocol family 8 [623931.944351] NET: Registered protocol family 20 [623931.946589] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [623931.947833] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [623931.949055] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [623931.952204] cfg80211: Calling CRDA to update world regulatory domain [623931.953435] Switched to clocksource kvm-clock [623931.960742] FS-Cache: Loaded [623931.961653] AppArmor: AppArmor Filesystem Enabled [623931.962753] pnp: PnP ACPI init [623931.963581] ACPI: bus type PNP registered [623931.964644] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [623931.966452] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [623931.967767] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [623931.969597] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [623931.970846] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [623931.972727] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [623931.974151] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [623931.975926] pnp 00:03: [dma 2] [623931.976866] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [623931.978290] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [623931.980077] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [623931.981482] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [623931.983298] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [623931.985431] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [623931.987306] pnp: PnP ACPI: found 7 devices [623931.988244] ACPI: bus type PNP unregistered [623932.029018] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [623932.030100] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [623932.031167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [623932.032294] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [623932.033485] NET: Registered protocol family 1 [623932.034460] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [623932.035566] pci 0000:00:01.0: PIIX3: Enabling Passive Release [623932.036656] pci 0000:00:01.0: Activating ISA DMA hang workarounds [623932.037800] pci 0000:00:02.0: Boot video device [623932.038806] PCI: CLS 0 bytes, default 64 [623932.039949] Unpacking initramfs... [623932.865615] Freeing initrd memory: 24852K (ce7ab000 - cfff0000) [623932.939599] DMA-API: preallocated 65536 debug entries [623932.940626] DMA-API: debugging enabled by kernel config [623932.942718] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [623932.943980] microcode: Microcode Update Driver: v2.00 , Peter Oruba [623932.946472] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [623932.948403] NatSemi SCx200 Driver [623932.949704] futex hash table entries: 256 (order: -1, 2048 bytes) [623932.950872] audit: initializing netlink socket (disabled) [623932.951995] type=2000 audit(1390388672.982:1): initialized [623933.715653] HugeTLB registered 4 MB page size, pre-allocated 0 pages [623933.744900] NTFS driver 2.1.30 [Flags: R/O]. [623933.747043] fuse init (API version 7.22) [623933.749377] JFS: nTxBlock = 1709, nTxLock = 13674 [623933.751953] NILFS version 2 loaded [623933.754747] GFS2 installed [623933.760211] alg: No test for crc32 (crc32-table) [623933.761381] alg: No test for lz4 (lz4-generic) [623933.762365] alg: No test for lz4hc (lz4hc-generic) [623933.763396] alg: No test for stdrng (krng) [623933.768588] NET: Registered protocol family 38 [623933.769551] Key type asymmetric registered [623933.770441] Asymmetric key parser 'x509' registered [623933.771432] io scheduler noop registered (default) [623933.772910] io scheduler cfq registered [623933.773917] xz_dec_test: module loaded [623933.774769] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [623933.778062] rivafb_setup START [623933.778905] nvidiafb_setup START [623933.779808] VIA Graphics Integration Chipset framebuffer 2.4 initializing [623933.781240] vmlfb: initializing [623933.782140] no IO addresses supplied [623933.783329] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [623933.785155] CL Picasso4: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [623933.786810] cirrusfb 0000:00:02.0: could not register fb device; err = -38! [623933.788056] cirrusfb: probe of 0000:00:02.0 failed with error -38 [623933.789391] usbcore: registered new interface driver udlfb [623933.790486] usbcore: registered new interface driver smscufx [623933.791945] uvesafb: failed to execute /sbin/v86d [623933.792918] uvesafb: make sure that the v86d helper is installed and executable [623933.794546] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [623933.795726] uvesafb: vbe_init() failed with -22 [623933.796679] uvesafb: probe of uvesafb.0 failed with error -22 [623933.800443] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [623933.801547] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [623933.806477] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [623933.807577] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [623933.812600] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [623933.817327] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [623933.828409] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [623933.851247] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [623933.854130] serial: Freescale lpuart driver [623933.855149] Cyclades driver 2.6 [623933.856108] MOXA Intellio family driver version 6.0k [623933.857209] RocketPort device driver module, version 2.09, 12-June-2003 [623933.858450] No rocketport ports found; unloading driver [623933.859551] SyncLink GT [623933.860276] SyncLink GT, tty major#247 [623933.861204] SyncLink GT no devices found [623933.862119] SyncLink serial driver $Revision: 4.38 $ [623933.870138] SyncLink serial driver $Revision: 4.38 $, tty major#246 [623933.871346] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [623933.872975] ac.o: No PCI boards found. [623933.873841] ac.o: For an ISA board you must supply memory and irq parameters. [623933.875720] Non-volatile memory driver v1.3 [623933.876641] scx200_gpio: no SCx200 gpio present [623933.877609] nsc_gpio initializing [623933.878447] telclk_interrupt = 0xf non-mcpbl0010 hw. [623933.879511] smapi::smapi_init, ERROR invalid usSmapiID [623933.880560] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [623933.882420] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [623933.884049] mwave: mwavedd::mwave_init: Error: Failed to initialize [623933.885187] Linux agpgart interface v0.103 [623933.886441] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [623933.888240] Hangcheck: Using getrawmonotonic(). [623933.889477] [drm] Initialized drm 1.1.0 20060810 [623933.890904] dummy-irq: no IRQ given. Use irq=N [623933.891927] Phantom Linux Driver, version n0.9.8, init OK [623933.893346] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [623933.895194] c2port c2port0: C2 port uc added [623933.896129] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [623933.897933] Guest personality initialized and is inactive [623933.899070] VMCI host device registered (name=vmci, major=10, minor=62) [623933.900255] Initialized host personality [623933.901777] usbcore: registered new interface driver viperboard [623933.902921] Uniform Multi-Platform E-IDE driver [623933.903996] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [623933.905239] piix 0000:00:01.1: not 100% native mode: will probe irqs later [623933.908047] ide0: BM-DMA at 0xc1c0-0xc1c7 [623933.908996] ide1: BM-DMA at 0xc1c8-0xc1cf [623933.909917] Probing IDE interface ide0... [623933.933477] tsc: Refined TSC clocksource calibration: 2693.449 MHz [623934.513546] Probing IDE interface ide1... [623935.303515] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [623936.023609] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [623936.024893] hdc: MWDMA2 mode selected [623936.025887] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [623936.027001] ide1 at 0x170-0x177,0x376 on irq 15 [623936.029370] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [623936.031319] ide-cd driver 5.00 [623936.032423] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache [623936.033803] cdrom: Uniform CD-ROM driver Revision: 3.20 [623936.036417] SSFDC read-only Flash Translation layer [623936.037473] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [623936.039110] device id = 2440 [623936.039868] device id = 2480 [623936.040597] device id = 24c0 [623936.041378] device id = 24d0 [623936.042164] device id = 25a1 [623936.042959] device id = 2670 [623936.043817] platform physmap-flash.0: failed to claim resource 0 [623936.045004] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [623936.046320] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [623936.048009] pmc551: not detected [623936.050937] HSI/SSI char device loaded [623936.052140] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [623936.055313] libphy: Fixed MDIO Bus: probed [623936.056381] vcan: Virtual CAN interface driver [623936.057323] CAN device driver interface [623936.058229] usbcore: registered new interface driver ems_usb [623936.059344] usbcore: registered new interface driver kvaser_usb [623936.060494] usbcore: registered new interface driver peak_usb [623936.061612] cc770: CAN netdevice driver [623936.068735] cc770_isa: insufficient parameters supplied [623936.070076] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [623936.071409] Atheros(R) L2 Ethernet Driver - version 2.2.3 [623936.072468] Copyright (c) 2007 Atheros Corporation. [623936.074114] vxge: Copyright(c) 2002-2010 Exar Corp. [623936.075102] vxge: Driver version: 2.5.3.22640-k [623936.076105] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [623936.077388] e1000: Copyright (c) 1999-2006 Intel Corporation. [623936.415403] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [623936.416634] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [623936.417889] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [623936.418978] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [623936.420140] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [623936.421347] igb: Copyright (c) 2007-2013 Intel Corporation. [623936.422512] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [623936.424236] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [623936.425384] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k [623936.427231] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [623936.428412] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.3.11-k [623936.430109] i40e: Copyright (c) 2013 Intel Corporation. [623936.431199] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [623936.432809] ixgb: Copyright (c) 1999-2008 Intel Corporation. [623936.434004] jme: JMicron JMC2XX ethernet driver version 1.0.8 [623936.435350] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.52 [623936.436654] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [623936.437740] tehuti: Options: hw_csum [623936.438653] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [623936.439688] AX.25: bpqether driver version 004 [623936.440638] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [623936.440638] baycom_ser_fdx: version 0.10 [623936.443765] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [623936.444854] hdlcdrv: version 0.8 [623936.445645] PPP generic driver version 2.4.2 [623936.446723] PPP BSD Compression module registered [623936.447696] PPP Deflate Compression module registered [623936.448721] PPP MPPE Compression module registered [623936.449699] NET: Registered protocol family 24 [623936.450660] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [623936.451801] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [623936.453004] ipw2100: Copyright(c) 2003-2006 Intel Corporation [623936.454206] libipw: 802.11 data/management/control stack, git-1.1.13 [623936.455361] libipw: Copyright (C) 2004-2005 Intel Corporation [623936.457125] Atmel at76x USB Wireless LAN Driver 0.17 loading [623936.458264] usbcore: registered new interface driver at76c50x-usb [623936.459400] Loaded prism54 driver, version 1.2 [623936.460531] Broadcom 43xx driver loaded [ Features: PLS ] [623936.461609] Broadcom 43xx-legacy driver loaded [ Features: PLD ] [623936.462725] zd1211rw usb_init() [623936.463613] usbcore: registered new interface driver zd1211rw [623936.464699] zd1211rw initialized [623936.465597] usbcore: registered new interface driver rtl8187 [623936.466913] usbcore: registered new interface driver rndis_wlan [623936.468148] usbcore: registered new interface driver zd1201 [623936.469309] usbcore: registered new interface driver lbtf_usb [623936.470490] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [623936.472348] iwl3945: Copyright(c) 2003-2011 Intel Corporation [623936.473650] usbcore: registered new interface driver rt2500usb [623936.474808] usbcore: registered new interface driver rt2800usb [623936.476211] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [623936.477908] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.479540] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [623936.481221] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.482865] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [623936.484556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.486189] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [623936.487910] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.489528] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [623936.491197] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.492836] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [623936.494544] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.496198] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [623936.497879] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.499500] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [623936.501196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.502841] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [623936.504546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.506200] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [623936.507865] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.509487] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [623936.511168] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.512799] cfg80211: Updating information on frequency 2467 MHz with regulatory rule: [623936.514511] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.516229] cfg80211: Updating information on frequency 2472 MHz with regulatory rule: [623936.517929] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [623936.519598] cfg80211: Updating information on frequency 2484 MHz with regulatory rule: [623936.521271] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [623936.522912] cfg80211: Updating information on frequency 5180 MHz with regulatory rule: [623936.524573] cfg80211: 5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.526220] cfg80211: Updating information on frequency 5200 MHz with regulatory rule: [623936.527895] cfg80211: 5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.529514] cfg80211: Updating information on frequency 5220 MHz with regulatory rule: [623936.531194] cfg80211: 5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.532814] cfg80211: Updating information on frequency 5240 MHz with regulatory rule: [623936.534526] cfg80211: 5170000 KHz - 5250000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.536208] cfg80211: Updating information on frequency 5260 MHz with regulatory rule: [623936.537921] cfg80211: 5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.539602] cfg80211: Updating information on frequency 5280 MHz with regulatory rule: [623936.541278] cfg80211: 5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.542964] cfg80211: Updating information on frequency 5300 MHz with regulatory rule: [623936.544660] cfg80211: 5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.546364] cfg80211: Updating information on frequency 5320 MHz with regulatory rule: [623936.548063] cfg80211: 5250000 KHz - 5330000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.549711] cfg80211: Updating information on frequency 5500 MHz with regulatory rule: [623936.551392] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.553010] cfg80211: Updating information on frequency 5520 MHz with regulatory rule: [623936.554724] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.556327] cfg80211: Updating information on frequency 5540 MHz with regulatory rule: [623936.558000] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.559652] cfg80211: Updating information on frequency 5560 MHz with regulatory rule: [623936.561327] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.563018] cfg80211: Updating information on frequency 5580 MHz with regulatory rule: [623936.564694] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.566330] cfg80211: Updating information on frequency 5600 MHz with regulatory rule: [623936.568080] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.569712] cfg80211: Updating information on frequency 5620 MHz with regulatory rule: [623936.571399] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.579206] cfg80211: Updating information on frequency 5640 MHz with regulatory rule: [623936.580858] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.582533] cfg80211: Updating information on frequency 5660 MHz with regulatory rule: [623936.584249] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.585896] cfg80211: Updating information on frequency 5680 MHz with regulatory rule: [623936.587602] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.589220] cfg80211: Updating information on frequency 5700 MHz with regulatory rule: [623936.590899] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (600 mBi, 2000 mBm) [623936.592533] cfg80211: Disabling freq 5745 MHz [623936.593465] cfg80211: Disabling freq 5765 MHz [623936.594385] cfg80211: Disabling freq 5785 MHz [623936.595311] cfg80211: Disabling freq 5805 MHz [623936.596232] cfg80211: Disabling freq 5825 MHz [623936.597242] ieee80211 phy0: Failed to select rate control algorithm [623936.598414] ieee80211 phy0: Failed to initialize rate control algorithm [623936.599745] mac80211_hwsim: ieee80211_register_hw failed (-2) [623936.600901] BUG: unable to handle kernel paging request at 6b6b6b8f [623936.602208] IP: [] kobject_get+0x3d/0xc1 [623936.603293] *pde = 00000000 [623936.604115] Oops: 0002 [#1] [623936.604939] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-04758-gabcab52 #159 [623936.606557] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [623936.607648] task: ce060000 ti: ce064000 task.ti: ce064000 [623936.608700] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [623936.609769] EIP is at kobject_get+0x3d/0xc1 [623936.610680] EAX: 00000001 EBX: 6b6b6b73 ECX: 00000000 EDX: c0122360 [623936.611825] ESI: c2ce5450 EDI: ce065f04 EBP: ce065ec4 ESP: ce065ec0 [623936.612987] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [623936.614033] CR0: 8005003b CR2: 6b6b6b8f CR3: 02fa2000 CR4: 00000690 [623936.615191] Stack: [623936.615837] 6b6b6b6b ce065ecc c1769a1b ce065ee0 c176facd c2ce5450 fffffffe ce065f04 [623936.618016] ce065ef0 c176e06d c2ce5450 ce065f04 ce065f08 c17707f4 c1770766 00000000 [623936.620196] c17707f4 00000000 ce065f10 c1772b2d ce065f24 c2f1562a c2f14f8a 00000000 [623936.622388] Call Trace: [623936.623132] [] get_device+0x2b/0x41 [623936.624039] [] driver_detach+0x69/0x14e [623936.625044] [] bus_remove_driver+0x12d/0x172 [623936.626090] [] driver_unregister+0x7e/0x91 [623936.627082] [] ? driver_remove_groups+0x19/0x29 [623936.628160] [] ? driver_unregister+0x7e/0x91 [623936.629157] [] platform_driver_unregister+0x19/0x29 [623936.630265] [] init_mac80211_hwsim+0x6a0/0x6b8 [623936.631332] [] ? p54p_driver_init+0x32/0x32 [623936.632330] [] do_one_initcall+0x131/0x24d [623936.633350] [] ? repair_env_string+0x32/0xd3 [623936.634411] [] ? do_early_param+0x128/0x128 [623936.635436] [] ? parse_args+0x41a/0x5cf [623936.636419] [] ? do_early_param+0x128/0x128 [623936.637436] [] kernel_init_freeable+0x27b/0x3e9 [623936.638466] [] ? kernel_init_freeable+0x27b/0x3e9 [623936.639854] [] kernel_init+0x16/0x1fa [623936.641025] [] ret_from_kernel_thread+0x1b/0x30 [623936.642112] [] ? rest_init+0xf1/0xf1 [623936.643111] Code: c0 53 89 c3 0f 84 a0 00 00 00 83 05 c8 d4 19 c3 01 83 15 cc d4 19 c3 00 b8 01 00 00 00 83 05 18 c8 19 c3 01 83 15 1c c8 19 c3 00 <0f> c1 43 1c 83 05 20 c8 19 c3 01 83 15 24 c8 19 c3 00 40 48 7f [623936.650430] EIP: [] kobject_get+0x3d/0xc1 SS:ESP 0068:ce065ec0 [623936.651747] CR2: 000000006b6b6b8f [623936.652564] ---[ end trace 788ca11104c0a921 ]--- [623936.653543] Kernel panic - not syncing: Fatal exception [623936.654566] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xd07fdfff) [623936.656289] Rebooting in 10 seconds.. Elapsed time: 5 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-r1-0122/abcab52cfba54e0e3b19d88eab7e9d340593b987/vmlinuz-3.13.0-04758-gabcab52 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r1-0122/linux-devel:devel-roam-i386-201401221837/.vmlinuz-abcab52cfba54e0e3b19d88eab7e9d340593b987-20140122190414-2-inn branch=linux-devel/devel-roam-i386-201401221837 BOOT_IMAGE=/kernel/i386-randconfig-r1-0122/abcab52cfba54e0e3b19d88eab7e9d340593b987/vmlinuz-3.13.0-04758-gabcab52' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 256M -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::10177-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/LABEL=KVM/disk0-quantal-inn-9,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-quantal-inn-9,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-quantal-inn-9,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-quantal-inn-9,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-quantal-inn-9,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-quantal-inn-9,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-quantal-inn-9 -serial file:/dev/shm/kboot/serial-quantal-inn-9 -daemonize -display none -monitor null