| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2474482.NNYSDJNOHI@vostro.rjw.lan>
Date: Fri, 24 Jan 2014 23:31:59 +0100
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux PM list <linux-pm@...r.kernel.org>
Cc: ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: [Update][RFC/RFT][PATCH v2 5/6] ACPI / LPSS: Support for device latency tolerance PM QoS
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Subject: ACPI / LPSS: Support for device latency tolerance PM QoS
Add a new routine, acpi_lpss_set_ltr(), for setting latency tolerance
values for LPSS devices having LTR (Latency Tolerance Reporting)
registers. Add .bind()/.unbind() callbacks to lpss_handler to set
the LPSS devices' power.set_latency_tolerance callback pointers to
acpi_lpss_set_ltr() during device addition and to clear them on
device removal, respectively.
That will cause the device latency tolerance PM QoS to work for
the devices in question as documented.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
This one needs to be update to handle PM_QOS_LATENCY_ANY to follow the [3/6]
update I've just sent.
Thanks,
Rafael
---
drivers/acpi/acpi_lpss.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 72 insertions(+), 1 deletion(-)
Index: linux-pm/drivers/acpi/acpi_lpss.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpi_lpss.c
+++ linux-pm/drivers/acpi/acpi_lpss.c
@@ -18,6 +18,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/platform_data/clk-lpss.h>
+#include <linux/pm_qos.h>
#include <linux/pm_runtime.h>
#include "internal.h"
@@ -33,6 +34,12 @@ ACPI_MODULE_NAME("acpi_lpss");
#define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
#define LPSS_SW_LTR 0x10
#define LPSS_AUTO_LTR 0x14
+#define LPSS_LTR_SNOOP_REQ BIT(15)
+#define LPSS_LTR_SNOOP_MASK 0x0000FFFF
+#define LPSS_LTR_SNOOP_LAT_1US 0x800
+#define LPSS_LTR_SNOOP_LAT_32US 0xC00
+#define LPSS_LTR_SNOOP_LAT_SHIFT 5
+#define LPSS_LTR_MAX_VAL 0x3FF
#define LPSS_TX_INT 0x20
#define LPSS_TX_INT_MASK BIT(1)
@@ -316,6 +323,17 @@ static int acpi_lpss_create_device(struc
return ret;
}
+static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
+{
+ return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
+}
+
+static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
+ unsigned int reg)
+{
+ writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
+}
+
static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
{
struct acpi_device *adev;
@@ -337,7 +355,7 @@ static int lpss_reg_read(struct device *
ret = -ENODEV;
goto out;
}
- *val = readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
+ *val = __lpss_reg_read(pdata, reg);
out:
spin_unlock_irqrestore(&dev->power.lock, flags);
@@ -390,6 +408,39 @@ static struct attribute_group lpss_attr_
.name = "lpss_ltr",
};
+static void acpi_lpss_set_ltr(struct device *dev, s32 val)
+{
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ u32 ltr_mode, ltr_val;
+
+ ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
+ if (val < 0) {
+ if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
+ ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
+ __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
+ }
+ return;
+ }
+ ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
+ if (val == PM_QOS_LATENCY_ANY) {
+ ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
+ val = LPSS_LTR_MAX_VAL;
+ } else if (val > LPSS_LTR_MAX_VAL) {
+ ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
+ val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
+ if (val > LPSS_LTR_MAX_VAL)
+ val = LPSS_LTR_MAX_VAL;
+ } else {
+ ltr_val |= LPSS_LTR_SNOOP_LAT_1US;
+ }
+ ltr_val |= val;
+ __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
+ if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
+ ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
+ __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
+ }
+}
+
static int acpi_lpss_platform_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -427,9 +478,29 @@ static struct notifier_block acpi_lpss_n
.notifier_call = acpi_lpss_platform_notify,
};
+static void acpi_lpss_bind(struct device *dev)
+{
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+
+ if (!pdata || !pdata->mmio_base)
+ return;
+
+ if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
+ dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
+ else
+ dev_err(dev, "MMIO size insufficient to access LTR\n");
+}
+
+static void acpi_lpss_unbind(struct device *dev)
+{
+ dev->power.set_latency_tolerance = NULL;
+}
+
static struct acpi_scan_handler lpss_handler = {
.ids = acpi_lpss_device_ids,
.attach = acpi_lpss_create_device,
+ .bind = acpi_lpss_bind,
+ .unbind = acpi_lpss_unbind,
};
void __init acpi_lpss_init(void)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists