linux-kernel - [PATCH] mmc: sdhci-bcm-kona: Add basic use of clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <1390602514-2843-1-git-send-email-tim.kryger@linaro.org>
Date:	Fri, 24 Jan 2014 14:28:34 -0800
From:	Tim Kryger <tim.kryger@...aro.org>
To:	Chris Ball <cjb@...top.org>, Christian Daudt <bcm@...thebug.org>,
	Ulf Hansson <ulf.hansson@...aro.org>,
	Axel Lin <axel.lin@...ics.com>
CC:	Tim Kryger <tim.kryger@...aro.org>,
	Linux MMC List <linux-mmc@...r.kernel.org>,
	Linux Kernel List <linux-kernel@...r.kernel.org>,
	Linaro Patches List <patches@...aro.org>
Subject: [PATCH] mmc: sdhci-bcm-kona: Add basic use of clocks

Enable the external clock needed by the host controller during the
probe and disable it during the remove.

Signed-off-by: Tim Kryger <tim.kryger@...aro.org>
Reviewed-by: Markus Mayer <markus.mayer@...aro.org>
Reviewed-by: Matt Porter <matt.porter@...aro.org>
Reviewed-by: Christian Daudt <bcm@...thebug.org>
---

This was dropped from "Update Kona drivers to use clocks" series so the
remaining patches could get into v3.14:

https://lkml.org/lkml/2014/1/24/286

Without this change the bcm28155_ap board can not be configured to use
the bcm281xx clock driver since unused clocks will be disabled during
late init.

 drivers/mmc/host/sdhci-bcm-kona.c | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index 7a190fe..923eefa 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -54,6 +54,7 @@
 
 struct sdhci_bcm_kona_dev {
 	struct mutex	write_lock; /* protect back to back writes */
+	struct clk	*external_clk;
 };
 
 
@@ -257,6 +258,24 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 		goto err_pltfm_free;
 	}
 
+	/* Get and enable the external clock */
+	kona_dev->external_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(kona_dev->external_clk)) {
+		dev_err(dev, "Failed to get external clock\n");
+		ret = PTR_ERR(kona_dev->external_clk);
+		goto err_pltfm_free;
+	}
+
+	if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
+		dev_err(dev, "Failed to set rate external clock\n");
+		goto err_pltfm_free;
+	}
+
+	if (clk_prepare_enable(kona_dev->external_clk) != 0) {
+		dev_err(dev, "Failed to enable external clock\n");
+		goto err_pltfm_free;
+	}
+
 	dev_dbg(dev, "non-removable=%c\n",
 		(host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N');
 	dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n",
@@ -271,7 +290,7 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 
 	ret = sdhci_bcm_kona_sd_reset(host);
 	if (ret)
-		goto err_pltfm_free;
+		goto err_clk_disable;
 
 	sdhci_bcm_kona_sd_init(host);
 
@@ -307,6 +326,9 @@ err_remove_host:
 err_reset:
 	sdhci_bcm_kona_sd_reset(host);
 
+err_clk_disable:
+	clk_disable_unprepare(kona_dev->external_clk);
+
 err_pltfm_free:
 	sdhci_pltfm_free(pdev);
 
@@ -316,7 +338,18 @@ err_pltfm_free:
 
 static int __exit sdhci_bcm_kona_remove(struct platform_device *pdev)
 {
-	return sdhci_pltfm_unregister(pdev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+	struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(kona_dev->external_clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
 }
 
 static struct platform_driver sdhci_bcm_kona_driver = {
-- 
1.8.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/