linux-kernel - [PATCH v2 2/3] usb: musb: musb_cppi41: Make CPPI aware of high bandwidth transfers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1390815446-1236-3-git-send-email-george.cherian@ti.com>
Date:	Mon, 27 Jan 2014 15:07:25 +0530
From:	George Cherian <george.cherian@...com>
To:	<linux-usb@...r.kernel.org>
CC:	<balbi@...com>, <gregkh@...uxfoundation.org>,
	<linux-kernel@...r.kernel.org>,
	George Cherian <george.cherian@...com>
Subject: [PATCH v2 2/3] usb: musb: musb_cppi41: Make CPPI aware of high bandwidth transfers

Enable CPPI to handle high bandwidth transfers, especially to support
webcam captures. Use a single bd to get the whole of the data in case of
high bandwidth transfers.

Signed-off-by: George Cherian <george.cherian@...com>
---
 drivers/usb/musb/musb_cppi41.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index f889296..39ee516 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -448,12 +448,25 @@ static int cppi41_dma_channel_program(struct dma_channel *channel,
 				dma_addr_t dma_addr, u32 len)
 {
 	int ret;
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	int hb_mult = 0;
 
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	if (is_host_active(cppi41_channel->controller->musb)) {
+		if (cppi41_channel->is_tx)
+			hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult;
+		else
+			hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult;
+	}
+
 	channel->status = MUSB_DMA_STATUS_BUSY;
 	channel->actual_len = 0;
+
+	if (hb_mult)
+		packet_sz = hb_mult * (packet_sz & 0x7FF);
+
 	ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len);
 	if (!ret)
 		channel->status = MUSB_DMA_STATUS_FREE;
-- 
1.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/