| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140128074611.GH3162@norris-Latitude-E6410>
Date: Mon, 27 Jan 2014 23:46:11 -0800
From: Brian Norris <computersforpeace@...il.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
David Woodhouse <dwmw2@...radead.org>,
Artem Bityutskiy <dedekind1@...il.com>,
linux-mtd@...ts.infradead.org,
Linux Kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] MTD changes for 3.14
Hi Linus,
Here are the MTD updates for 3.14. Sorry, I still haven't gotten many
useful signatures on my key yet. I don't know too many local developers
in your web of trust. I'll try to get to a conference soon enough.
Notably, I'm adding myself to MAINTAINERS. I've gotten an ack from Artem
(an unofficial maintainer), but David's ack would be nice.
Regards,
Brian
The following changes since commit 802eee95bde72fd0cd0f3a5b2098375a487d1eda:
Linux 3.13-rc6 (2013-12-29 16:01:33 -0800)
are available in the git repository at:
git://git.infradead.org/linux-mtd.git tags/for-linus-20140127
for you to fetch changes up to 0ff76a920e3558307567b45aa0a91fb914924bfc:
mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf (2014-01-27 21:55:03 -0800)
----------------------------------------------------------------
MTD updates for 3.14:
- Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get
David's "ack" for this; I'm sure he approves, but he's been pretty silent
lately)
- Add Ezequiel Garcia as maintainer for the pxa3xx NAND driver
- Last (?) round of pxa3xx improvements for supporting Armada 370/XP
- Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.)
- Quad read mode support for SPI NOR driver (m25p80)
- Update Davinci NAND driver to prepare for use on new platforms
- Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending
- Miscellaneous NAND device support (new IDs)
- Add READ RETRY support for Micron MLC NAND
- Support new GPMI NAND ECC layout device-tree binding
- Avoid mapping stack/vmalloc() memory for GPMI NAND DMA
----------------------------------------------------------------
Alexander Shiyan (1):
mtd: nand: diskonchip: Request memory region prior ioremap()
Axel Lin (3):
mtd: convert to use ATTRIBUTE_GROUPS
mtd: make deregister_mtd_parser return void
mtd: make register_mtd_parser return void
Brian Norris (14):
mtd: nand: pxa3xx: make ECC configuration checks more explicit
mtd: nand: fix misspelling in ONFI parameter field name
MAINTAINERS: mtd: add Brian Norris for MTD maintenance
mtd: nand: lpc32xx_mlc: drop custom write_page callback
mtd: nand-gpio: don't waste memory for OF failure
mtd: omap2: use nand_base defaults for polled I/O
mtd: onenand: fix warning (integer used as pointer)
mtd: nand: localize ECC failures per page
mtd: nand: add ONFI vendor block for Micron
mtd: nand: add generic READ RETRY support
mtd: nand: support Micron READ RETRY
mtd: nand: use __packed shorthand
mtd: m25p80: assign default read command
mtd: mtdram: add missing 'const'
Cai Zhiyong (1):
mtd: nand: assign mtd->name in find_full_id_nand
Ezequiel Garcia (33):
mtd: nand: omap2: Fix OMAP_BCH option dependency
mtd: nand: pxa3xx: devicetree binding update
mtd: nand: pxa3xx: Add documentation about the controller
mtd: nand: pxa3xx: Make config menu show supported platforms
mtd: nand: pxa3xx: Prevent sub-page writes
mtd: nand: pxa3xx: read_page() returns max_bitflips
mtd: nand: pxa3xx: Early variant detection
mtd: nand: pxa3xx: Use chip->cmdfunc instead of the internal
mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count
mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize
mtd: nand: pxa3xx: Add a nice comment to pxa3xx_set_datasize()
mtd: nand: pxa3xx: Use a completion to signal device ready
mtd: nand: pxa3xx: Use waitfunc() to wait for the device to be ready
mtd: nand: pxa3xx: Add bad block handling
mtd: nand: pxa3xx: Add driver-specific ECC BCH support
mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start
mtd: nand: pxa3xx: Add helper function to set page address
mtd: nand: pxa3xx: Remove READ0 switch/case falltrough
mtd: nand: pxa3xx: Split prepare_command_pool() in two stages
mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command()
mtd: nand: pxa3xx: Fix SEQIN column address set
mtd: nand: pxa3xx: Add a read/write buffers markers
mtd: nand: pxa3xx: Introduce multiple page I/O support
mtd: nand: pxa3xx: Add multiple chunk write support
mtd: nand: pxa3xx: Add ECC BCH correctable errors detection
mtd: nand: refactor print messages
MAINTAINERS: mtd: add PXA3xx NAND driver to MAINTAINERS
mtd: nand: sh_flctl: Remove unneeded CONFIG_OF
mtd: nand: pxa3xx: Clear need_wait flag when starting a command
mtd: nand: pxa3xx: Use extended cmdfunc() only if needed
mtd: nand: pxa3xx: Consolidate ECC initialization
mtd: Hide CONFIG_MTD_BLKDEVS from the menu
mtd: nand: pxa3xx: Add "armada370-nand" compatible
Fabio Estevam (4):
mtd: gpmi: Use devm_clk_get()
mtd: gpmi-lib: Make checkpatch happy
mtd: nand: mxc_nand: Check the return value from clk_prepare_enable()
mtd: tests: mtd_nandecctest: Use IS_ENABLED() macro
Geert Uytterhoeven (7):
mtd: remove superfluous name casts
mtd: pasemi_nand.c: remove superfluous name cast
mtd: ms02-nv: remove superfluous name cast
mtd: make mtd_partition.name const
mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing
mtd: m25p80: Enable Quad SPI read transfers for s25fl512s
mtd: m25p80: Set rx_nbits for Quad SPI transfers
Huang Shijie (17):
mtd: gpmi: add a new DT property to use the datasheet's minimum required ECC
mtd: gpmi: do not use the local array to do the DMA transfer
mtd: gpmi: delete the gpmi_pre_bbt_scan
mtd: gpmi: remove the unused line
mtd: gpmi: rename the functions from gpmi_nfc_* to gpmi_nand_*
mtd: gpmi: use devm_ioremap_resource
mtd: gpmi: use devm_request_irq
mtd: gpmi: remove the unnecessary pr_err()
mtd: gpmi: change pr_err to dev_err
mtd: gpmi: change pr_debug to dev_dbg
mtd: mxc-nand: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE
mtd: denali: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE
mtd: nand: add support for Samsung K9LCG08U0B
mtd: nand: add SanDisk manufacturer ID
mtd: nand: add Intel manufacturer ID
mtd: gpmi: allocate a proper buffer for non ECC read/write
mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf
Igor Grinberg (1):
mtd: m25p80: add support for m25px16
Ivan Khoronzhuk (9):
mtd: nand: davinci: fix driver registration
mtd: nand: davinci: return ENOMEM if memory allocation is failed
mtd: nand: davinci: check required ti,davinci-chipselect property
mtd: nand: davinci: simplify error handling
mtd: nand: davinci: move bindings under mtd
mtd: nand: davinci: extend description of bindings
mtd: nand: davinci: adjust DT properties to MTD generic
mtd: nand: davinci: reuse driver for Keystone arch
mtd: nand: davinci: don't request AEMIF address range
Jingoo Han (36):
mtd: dataflash: remove unnecessary spi_set_drvdata()
mtd: denali: remove DEFINE_PCI_DEVICE_TABLE macro
mtd: docg3: Use devm_*() functions
mtd: lantiq-flash: Use devm_kzalloc()
mtd: denali_dt: Use devm_clk_get()
mtd: lpc32xx_slc: Use devm_*() functions
mtd: nuc900_nand: Use devm_*() functions
mtd: tmio_nand: Use devm_*() functions
mtd: atmel_nand: Remove unnecessary OOM messages
mtd: orion_nand: Remove unnecessary OOM messages
mtd: sharpsl: Remove unnecessary OOM messages
mtd: au1550nd: Remove unnecessary OOM messages
mtd: bf5xx_nand: Remove unnecessary OOM messages
mtd: cafe_nand: Remove unnecessary OOM messages
mtd: cmx270_nand: Remove unnecessary OOM messages
mtd: cs553x_nand: Remove unnecessary OOM messages
mtd: diskonchip: Remove unnecessary OOM messages
mtd: fsl_elbc_nand: Remove unnecessary OOM messages
mtd: fsl_ifc_nand: Remove unnecessary OOM messages
mtd: jz4740_nand: Remove unnecessary OOM messages
mtd: txx9ndfmc: Remove unnecessary OOM messages
mtd: davinci_nand: Remove unnecessary OOM messages
mtd: fsmc_nand: Remove unnecessary OOM messages
mtd: nand-gpio: Remove unnecessary OOM messages
mtd: lpc32xx_mlc: Remove unnecessary OOM messages
mtd: lpc32xx_slc: Remove unnecessary OOM messages
mtd: mpc5121_nfc: Remove unnecessary OOM messages
mtd: s3c2410: Remove unnecessary OOM messages
mtd: sh_flctl: Remove unnecessary OOM messages
mtd: atmel_nand: use dev_err() instead of printk()
mtd: fsmc_nand: use dev_warn() instead of printk()
mtd: orion_nand: use dev_err() instead of printk()
mtd: sharpsl: use dev_err() instead of printk()
mtd: ixp4xx: Use devm_*() functions
mtd: plat_nand: Use devm_*() functions
mtd: plat_nand: Remove unnecessary OOM messages
Josh Triplett (1):
mtd: denali: Drop print of build date/time
Laurent Pinchart (3):
mtd: sh_flctl: enable driver compilation with COMPILE_TEST
mtd: sh_flctl: fix warnings due to improper casts
mtd: sh_flctl: use devm_* managed allocators
Michael Grzeschik (1):
mtd: mxc_nand: remove duplicated ecc_stats counting
Philipp Rosenberger (1):
of_mtd: fix header file include guard
Prabhakar Kushwaha (1):
mtd: nand: Update mtd.name assignment type to u64 for IFC, eLBC
Rafał Miłecki (2):
mtd: bcm47xxpart: find boot partition by CFE magic
mtd: bcm47xxpart: alternative MAGIC for board_data partition
Rashika Kheria (2):
mtd: lpddr: Mark functions as static and remove unused function
mtd: denali: Mark function is_erased() as static
Rodolfo Giometti (1):
mtd: nand: pxa3xx: Add support for 2048 bytes page size devices
Sachin Kamat (4):
mtd: omap2: Cleanup header files
mtd: orion: Cleanup mtd-orion_nand.h header
mtd: onenand: Trivial cleanup in samsung.h
mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c
Sourav Poddar (2):
drivers: mtd: m25p80: convert "bool" read check into an enum
drivers: mtd: m25p80: add quad read support
Uwe Kleine-König (1):
mtd: nand: don't use {read,write}_buf for 8-bit transfers
Wei Yongjun (5):
mtd: mpc5121_nfc: drop devm_free_irq of devm_ allocated irq
mtd: mxc_nand: add missing clk_disable_unprepare() in mxcnd_remove()
mtd: au1550nd: add missing platform_set_drvdata()
mtd: plat_nand: remove redundant return value check of platform_get_resource()
mtd: nuc900_nand: remove redundant return value check of platform_get_resource()
Zhouyi Zhou (1):
jffs2: NULL return of kmem_cache_zalloc should be handled
.../devicetree/bindings/arm/davinci/nand.txt | 46 --
.../devicetree/bindings/mtd/davinci-nand.txt | 94 +++
.../devicetree/bindings/mtd/gpmi-nand.txt | 8 +
.../devicetree/bindings/mtd/pxa3xx-nand.txt | 6 +-
Documentation/mtd/nand/pxa3xx-nand.txt | 113 ++++
MAINTAINERS | 9 +-
arch/arm/plat-samsung/include/plat/regs-nand.h | 123 ----
drivers/mtd/Kconfig | 7 +-
drivers/mtd/afs.c | 3 +-
drivers/mtd/ar7part.c | 3 +-
drivers/mtd/bcm47xxpart.c | 27 +-
drivers/mtd/bcm63xxpart.c | 3 +-
drivers/mtd/cmdlinepart.c | 3 +-
drivers/mtd/devices/docg3.c | 20 +-
drivers/mtd/devices/m25p80.c | 226 ++++++-
drivers/mtd/devices/ms02-nv.c | 2 +-
drivers/mtd/devices/mtd_dataflash.c | 5 +-
drivers/mtd/devices/mtdram.c | 2 +-
drivers/mtd/lpddr/lpddr_cmds.c | 32 +-
drivers/mtd/maps/ixp4xx.c | 28 +-
drivers/mtd/maps/lantiq-flash.c | 37 +-
drivers/mtd/maps/pxa2xx-flash.c | 2 +-
drivers/mtd/maps/sun_uflash.c | 2 +-
drivers/mtd/mtdcore.c | 10 +-
drivers/mtd/mtdpart.c | 9 +-
drivers/mtd/nand/Kconfig | 14 +-
drivers/mtd/nand/atmel_nand.c | 8 +-
drivers/mtd/nand/au1550nd.c | 6 +-
drivers/mtd/nand/bf5xx_nand.c | 1 -
drivers/mtd/nand/cafe_nand.c | 4 +-
drivers/mtd/nand/cmx270_nand.c | 1 -
drivers/mtd/nand/cs553x_nand.c | 1 -
drivers/mtd/nand/davinci_nand.c | 93 +--
drivers/mtd/nand/denali.c | 53 +-
drivers/mtd/nand/denali.h | 4 +-
drivers/mtd/nand/denali_dt.c | 4 +-
drivers/mtd/nand/denali_pci.c | 3 +-
drivers/mtd/nand/diskonchip.c | 13 +-
drivers/mtd/nand/fsl_elbc_nand.c | 3 +-
drivers/mtd/nand/fsl_ifc_nand.c | 3 +-
drivers/mtd/nand/fsmc_nand.c | 16 +-
drivers/mtd/nand/gpio.c | 12 +-
drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 127 ++--
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 207 +++---
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 -
drivers/mtd/nand/jz4740_nand.c | 4 +-
drivers/mtd/nand/lpc32xx_mlc.c | 26 +-
drivers/mtd/nand/lpc32xx_slc.c | 19 +-
drivers/mtd/nand/mpc5121_nfc.c | 10 +-
drivers/mtd/nand/mxc_nand.c | 25 +-
drivers/mtd/nand/nand_base.c | 183 +++++-
drivers/mtd/nand/nand_ids.c | 2 +
drivers/mtd/nand/nuc900_nand.c | 54 +-
drivers/mtd/nand/omap2.c | 8 +-
drivers/mtd/nand/orion_nand.c | 4 +-
drivers/mtd/nand/pasemi_nand.c | 2 +-
drivers/mtd/nand/plat_nand.c | 40 +-
drivers/mtd/nand/pxa3xx_nand.c | 713 +++++++++++++++++----
drivers/mtd/nand/s3c2410.c | 38 +-
drivers/mtd/nand/sh_flctl.c | 55 +-
drivers/mtd/nand/sharpsl.c | 6 +-
drivers/mtd/nand/tmio_nand.c | 46 +-
drivers/mtd/nand/txx9ndfmc.c | 5 +-
drivers/mtd/ofpart.c | 19 +-
drivers/mtd/onenand/generic.c | 2 +-
drivers/mtd/onenand/samsung.h | 2 -
drivers/mtd/redboot.c | 3 +-
drivers/mtd/tests/mtd_nandecctest.c | 2 +-
fs/jffs2/malloc.c | 4 +
include/linux/mtd/mtdram.h | 2 +-
include/linux/mtd/nand.h | 41 +-
include/linux/mtd/partitions.h | 8 +-
include/linux/of_mtd.h | 2 +-
include/linux/platform_data/mtd-nand-omap2.h | 2 -
include/linux/platform_data/mtd-nand-pxa3xx.h | 3 +
include/linux/platform_data/mtd-onenand-omap2.h | 2 -
include/linux/platform_data/mtd-orion_nand.h | 6 +-
77 files changed, 1688 insertions(+), 1045 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/davinci/nand.txt
create mode 100644 Documentation/devicetree/bindings/mtd/davinci-nand.txt
create mode 100644 Documentation/mtd/nand/pxa3xx-nand.txt
delete mode 100644 arch/arm/plat-samsung/include/plat/regs-nand.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists