[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-rc8AS+ (stern@saphir.localdomain) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #2 SMP PREEMPT Mon Jan 27 21:28:51 EST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd9ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007dda0000-0x000000007ddaefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ddaf000-0x000000007dddffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7dda0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC [ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC [ 0.000000] total RAM covered: 2014M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC [ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff] [ 0.000000] [mem 0x36400000-0x367fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff] [ 0.000000] [mem 0x30000000-0x363fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff] [ 0.000000] [mem 0x36800000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x01053000, 0x01053fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36a6a000-0x3752cfff] [ 0.000000] ACPI: RSDP 000f9180 000024 (v02 110209) [ 0.000000] ACPI: XSDT 7dda0100 00008C (v01 _ASUS_ Notebook 20091102 MSFT 00000097) [ 0.000000] ACPI: FACP 7dda0290 0000F4 (v03 110209 FACP1000 20091102 MSFT 00000097) [ 0.000000] ACPI: DSDT 7dda0680 00CF1B (v01 UL20A UL20A207 00000207 INTL 20051117) [ 0.000000] ACPI: FACS 7ddaf000 000040 [ 0.000000] ACPI: APIC 7dda0390 00005C (v01 110209 APIC1000 20091102 MSFT 00000097) [ 0.000000] ACPI: MCFG 7dda0430 00003C (v01 110209 OEMMCFG 20091102 MSFT 00000097) [ 0.000000] ACPI: SLIC 7dda0470 000176 (v01 _ASUS_ Notebook 20091102 MSFT 00000097) [ 0.000000] ACPI: ECDT 7dda0620 000054 (v01 110209 OEMECDT 20091102 MSFT 00000097) [ 0.000000] ACPI: DBGP 7dda03f0 000034 (v01 110209 DBGP1000 20091102 MSFT 00000097) [ 0.000000] ACPI: BOOT 7dda05f0 000028 (v01 110209 BOOT1000 20091102 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ddaf040 000071 (v01 110209 OEMB1000 20091102 MSFT 00000097) [ 0.000000] ACPI: HPET 7ddad5a0 000038 (v01 110209 OEMHPET 20091102 MSFT 00000097) [ 0.000000] ACPI: GSCI 7ddaf0c0 002024 (v01 110209 GMCHSCI 20091102 MSFT 00000097) [ 0.000000] ACPI: DMAR 7ddb10f0 000150 (v01 110209 DMAR1000 20091102 MSFT 00000097) [ 0.000000] ACPI: ATKG 7ddb1440 008024 (v01 _ASUS_ OEMATKG 20091102 MSFT 00000097) [ 0.000000] ACPI: SSDT 7ddb9f10 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1125MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x01054000, 0x01054fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7dd9ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7dd9ffff] [ 0.000000] On node 0 totalpages: 515389 [ 0.000000] free_area_init_node: node 0, pgdat c0a0ae80, node_mem_map f5aaa020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2252 pages used for memmap [ 0.000000] HighMem zone: 288162 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfed1ffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c3000 s30336 r0 d22912 u53248 [ 0.000000] pcpu-alloc: s30336 r0 d22912 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513613 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/test-3.x root=/dev/sda6 ro drm.debug=0xe acpi_backlight=vendor no_console_suspend rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us vconsole.font=latarcyrheb-sun16 rd.luks=0 LANG=en_US.UTF-8 2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 4123896 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dda0) [ 0.000000] Memory: 2016636K/2061556K available (4021K kernel code, 322K rwdata, 1864K rodata, 388K init, 5980K bss, 44920K reserved, 1152648K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffe6e000 - 0xfffff000 (1604 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0a12000 - 0xc0a73000 ( 388 kB) .data : 0xc07ed9ef - 0xc0a11900 (2191 kB) .text : 0xc0400000 - 0xc07ed9ef (4022 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1299.932 MHz processor [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.86 BogoMIPS (lpj=5199728) [ 0.004264] pid_max: default: 32768 minimum: 301 [ 0.004541] Security Framework initialized [ 0.004673] SELinux: Initializing. [ 0.004890] SELinux: Starting in permissive mode [ 0.004923] Mount-cache hash table entries: 512 [ 0.006621] Initializing cgroup subsys memory [ 0.006783] Initializing cgroup subsys devices [ 0.006940] Initializing cgroup subsys freezer [ 0.007092] Initializing cgroup subsys blkio [ 0.007222] Initializing cgroup subsys perf_event [ 0.007437] CPU: Physical Processor ID: 0 [ 0.007566] CPU: Processor Core ID: 0 [ 0.008013] mce: CPU supports 6 MCE banks [ 0.008151] CPU0: Thermal monitoring enabled (TM2) [ 0.008298] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 [ 0.008850] Freeing SMP alternatives memory: 12K (c0a73000 - c0a76000) [ 0.008983] ACPI: Core revision 20131115 [ 0.033691] ACPI: All ACPI Tables successfully acquired [ 0.036582] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.037295] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078734] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a) [ 0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.080000] ... version: 2 [ 0.080000] ... bit width: 40 [ 0.080000] ... generic registers: 2 [ 0.080000] ... value mask: 000000ffffffffff [ 0.080000] ... max period: 000000007fffffff [ 0.080000] ... fixed-purpose events: 3 [ 0.080000] ... event mask: 0000000700000003 [ 0.108469] CPU 1 irqstacks, hard=f50c6000 soft=f50d0000 [ 0.108475] x86: Booting SMP configuration: [ 0.008000] Initializing CPU#1 [ 0.120447] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.108605] .... node #0, CPUs: #1 [ 0.121514] x86: Booted up 1 node, 2 CPUs [ 0.121762] smpboot: Total of 2 processors activated (5199.72 BogoMIPS) [ 0.128602] devtmpfs: initialized [ 0.129220] PM: Registering ACPI NVS region [mem 0x7ddaf000-0x7dddffff] (200704 bytes) [ 0.129220] RTC time: 2:41:27, date: 01/28/14 [ 0.129521] NET: Registered protocol family 16 [ 0.130787] cpuidle: using governor ladder [ 0.130918] cpuidle: using governor menu [ 0.131419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.131647] ACPI: bus type PCI registered [ 0.132147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.132360] PCI: not using MMCONFIG [ 0.132747] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.132880] PCI: Using configuration type 1 for base access [ 0.140406] bio: create slab at 0 [ 0.140587] ACPI: Added _OSI(Module Device) [ 0.140587] ACPI: Added _OSI(Processor Device) [ 0.142545] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.142675] ACPI: Added _OSI(Processor Aggregator Device) [ 0.159954] ACPI : EC: EC description table is found, configuring boot EC [ 0.185807] ACPI: Executed 1 blocks of module-level executable AML code [ 0.196797] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.208437] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x1F, should be 0x25 (20131115/tbprint-214) [ 0.209530] ACPI: SSDT 7ddb9540 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.213803] ACPI: Dynamic OEM Table Load: [ 0.214026] ACPI: SSDT (null) 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.214723] ACPI: SSDT 7ddb97a0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.218943] ACPI: Dynamic OEM Table Load: [ 0.219164] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.220292] ACPI: SSDT 7ddb9470 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.224548] ACPI: Dynamic OEM Table Load: [ 0.224771] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.225368] ACPI: SSDT 7ddb9710 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.229597] ACPI: Dynamic OEM Table Load: [ 0.229820] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.231178] ACPI: Interpreter enabled [ 0.231347] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.231656] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.232040] ACPI: (supports S0 S3 S4 S5) [ 0.232170] ACPI: Using IOAPIC for interrupt routing [ 0.232404] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.240379] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.240590] PCI: Using MMCONFIG for extended config space [ 0.240761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.242274] ACPI: No dock devices found. [ 0.287408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.287551] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.288167] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control [ 0.289566] PCI host bridge to bus 0000:00 [ 0.289701] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.289835] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.289969] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.290103] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.290239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.290374] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xffffffff] [ 0.290593] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.291190] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.291230] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.291255] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.291273] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07] [ 0.291816] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.291850] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit] [ 0.292409] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.292526] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f] [ 0.293019] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.293299] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.293417] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f] [ 0.293853] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.294129] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.294246] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f] [ 0.294681] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.294988] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.295042] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff] [ 0.295271] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.295793] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.296102] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.296148] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit] [ 0.296353] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.296636] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.296917] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.297127] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.297558] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.297770] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.298059] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.298344] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.298461] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f] [ 0.298901] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.299190] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.299307] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f] [ 0.299752] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.300045] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.300163] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f] [ 0.300600] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.300901] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.300955] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff] [ 0.301184] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.301672] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.301951] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.302346] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.302622] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.303233] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.303291] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07] [ 0.303315] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883] [ 0.303339] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807] [ 0.303363] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483] [ 0.303388] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f] [ 0.303412] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff] [ 0.303557] pci 0000:00:1f.2: PME# supported from D3hot [ 0.304320] pci 0000:01:00.0: [8086:0083] type 00 class 0x028000 [ 0.304491] pci 0000:01:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit] [ 0.305282] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.305564] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.305709] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.305961] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000 [ 0.306015] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.306044] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.306277] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.306381] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.306633] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.306772] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.306784] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.307039] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.307197] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.307204] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.307210] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.307217] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.307224] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode) [ 0.307318] pci_bus 0000:00: on NUMA node 0 [ 0.312604] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 0.313444] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 12) [ 0.314140] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.314646] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12) [ 0.315385] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. [ 0.315986] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12) [ 0.316742] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12) [ 0.317531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12) [ 0.320406] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.320647] ACPI: \_SB_.PCI0: notify handler is installed [ 0.321046] Found 1 acpi root devices [ 0.321576] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.322182] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.322182] vgaarb: loaded [ 0.322182] vgaarb: bridge control possible 0000:00:02.0 [ 0.322182] SCSI subsystem initialized [ 0.322182] libata version 3.00 loaded. [ 0.322182] PCI: Using ACPI for IRQ routing [ 0.322182] PCI: pci_cache_line_size set to 64 bytes [ 0.324109] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.324126] e820: reserve RAM buffer [mem 0x7dda0000-0x7fffffff] [ 0.325385] cfg80211: Calling CRDA to update world regulatory domain [ 0.325599] NetLabel: Initializing [ 0.325599] NetLabel: domain hash size = 128 [ 0.325599] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.325599] NetLabel: unlabeled traffic allowed by default [ 0.325599] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.325599] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.325599] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.328112] Switched to clocksource hpet [ 0.328726] pnp: PnP ACPI init [ 0.328915] ACPI: bus type PNP registered [ 0.329222] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.329408] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.329505] pnp 00:01: [dma 4] [ 0.329595] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.329728] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.329915] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.330146] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.330255] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.330377] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.330959] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.331099] system 00:07: [io 0x0800-0x087f] could not be reserved [ 0.331235] system 00:07: [io 0x0400-0x041f] has been reserved [ 0.331371] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.331507] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved [ 0.331719] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.331860] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.331997] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.332155] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved [ 0.332292] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved [ 0.332429] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved [ 0.332565] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved [ 0.332720] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.332857] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.332999] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333271] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.333570] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved [ 0.333710] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.333853] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.334105] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.334247] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.334526] system 00:0b: [io 0x0250-0x0253] has been reserved [ 0.334664] system 00:0b: [io 0x0256-0x025f] has been reserved [ 0.334801] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.334938] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.335075] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.335211] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved [ 0.335352] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335635] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.335778] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336979] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.337119] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.337258] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.337396] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved [ 0.337538] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.338037] pnp: PnP ACPI: found 14 devices [ 0.338166] ACPI: bus type PNP unregistered [ 0.382350] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.382379] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.382391] pci 0000:00:1c.5: BAR 9: assigned [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.382603] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.382743] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.382894] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.383029] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.383171] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.383311] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.383530] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.383686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.383692] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.383698] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.383704] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.383710] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff] [ 0.383716] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.383722] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.383728] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.383734] pci_bus 0000:02: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.383741] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.383747] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.383752] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.383758] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.383764] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xffffffff] [ 0.383860] NET: Registered protocol family 2 [ 0.384760] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.384979] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.386320] TCP: Hash tables configured (established 8192 bind 8192) [ 0.386525] TCP: reno registered [ 0.386659] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.386951] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.387613] NET: Registered protocol family 1 [ 0.387778] pci 0000:00:02.0: Boot video device [ 0.388110] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.388115] pci 0000:00:1a.0: Performing full reset [ 0.388668] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.388673] pci 0000:00:1a.1: Performing full reset [ 0.389223] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.389228] pci 0000:00:1a.2: Performing full reset [ 0.390348] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.390353] pci 0000:00:1d.0: Performing full reset [ 0.390892] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.390898] pci 0000:00:1d.1: Performing full reset [ 0.391433] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.391438] pci 0000:00:1d.2: Performing full reset [ 0.392318] PCI: CLS 32 bytes, default 64 [ 0.392731] Unpacking initramfs... [ 1.018700] Freeing initrd memory: 11020K (f6a6a000 - f752d000) [ 1.041536] DMA-API: preallocated 65536 debug entries [ 1.041676] DMA-API: debugging enabled by kernel config [ 1.042130] Simple Boot Flag at 0x51 set to 0x1 [ 1.043501] Scanning for low memory corruption every 60 seconds [ 1.044668] audit: initializing netlink socket (disabled) [ 1.044875] type=2000 audit(1390876887.044:1): initialized [ 1.045926] bounce pool size: 64 pages [ 1.052366] VFS: Disk quotas dquot_6.5.2 [ 1.052644] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.054494] fuse init (API version 7.22) [ 1.054956] msgmni has been set to 1709 [ 1.055475] SELinux: Registering netfilter hooks [ 1.057848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.058084] io scheduler noop registered [ 1.058213] io scheduler deadline registered [ 1.058491] io scheduler cfq registered (default) [ 1.059098] intel_idle: does not run on family 6 model 23 [ 1.060221] ACPI: AC Adapter [AC0] (on-line) [ 1.060665] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.060950] ACPI: Sleep Button [SLPB] [ 1.061275] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.067648] ACPI: Lid Switch [LID] [ 1.068101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.068318] ACPI: Power Button [PWRF] [ 1.069589] Monitor-Mwait will be used to enter C-1 state [ 1.069614] Monitor-Mwait will be used to enter C-3 state [ 1.069743] tsc: Marking TSC unstable due to TSC halts in idle [ 1.069935] ACPI: acpi_idle registered with cpuidle [ 1.076791] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.076926] ACPI: Thermal Zone [THRM] (47 C) [ 1.077276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.080424] Non-volatile memory driver v1.3 [ 1.080622] Linux agpgart interface v0.103 [ 1.081253] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 1.083596] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.085824] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.086523] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.086784] [drm] Initialized drm 1.1.0 20060810 [ 1.090787] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv, [ 1.090976] [drm:intel_detect_pch], No PCH found? [ 1.090982] [drm] Memory usable by graphics device = 2048M [ 1.091165] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.091170] [drm:i915_gem_gtt_init], GTT stolen size = 32M [ 1.092575] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ddaf0e4 [ 1.092593] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.092597] [drm:intel_opregion_setup], SWSCI supported [ 1.116091] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (000000c1) [ 1.116098] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 1.116102] [drm:intel_opregion_setup], ASLE supported [ 1.116391] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.116420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.116553] [drm] Driver supports precise vblank timestamp query. [ 1.116767] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz [ 1.116774] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [ 1.116781] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.116786] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.116794] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.116802] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71900 1366 1414 1480 1486 768 774 782 806 0x8 0xa [ 1.116808] [drm:parse_lfp_panel_data], VBT initial LVDS value 4200033c [ 1.116814] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 50 [ 1.116821] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.116828] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.116833] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.116839] [drm:parse_mipi], No MIPI BDB found [ 1.116865] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.116911] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7e000000 [ 1.117326] [drm:intel_modeset_init], 2 display pipes available. [ 1.117408] [drm:intel_modeset_init], pipe A sprite A init failed: -19 [ 1.117423] [drm:intel_modeset_init], pipe B sprite B init failed: -19 [ 1.117437] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.143932] ACPI: Battery Slot [BAT0] (battery present) [ 1.204142] [drm:intel_lvds_init], using preferred mode from EDID: [ 1.204150] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.204165] [drm:intel_lvds_init], detected single-link lvds configuration [ 1.204556] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1398348/1992060, sysfs interface registered [ 1.204714] [drm:intel_dp_init_connector], Adding DP connector on port D [ 1.204826] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 1.205615] [drm:i965_irq_handler] *ERROR* pipe B underrun [ 1.207823] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.207838] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.210393] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.210411] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.210518] [drm:intel_tv_init], Integrated TV is not present. [ 1.210528] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 1.215014] [drm:init_status_page], render ring hws offset: 0x00001000 [ 1.215020] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.215028] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 1.215169] [drm:init_status_page], bsd ring hws offset: 0x00024000 [ 1.215175] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.215182] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 1.215279] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled [ 1.215299] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled [ 1.215308] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B [ 1.215316] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: enabled, pipe B [ 1.215324] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A [ 1.215331] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled [ 1.215337] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: enabled [ 1.215344] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled [ 1.215352] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.215357] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.215362] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.215369] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.215375] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.215379] [drm:intel_dump_pipe_config], requested mode: [ 1.215386] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.215390] [drm:intel_dump_pipe_config], adjusted mode: [ 1.215397] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.215403] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.215407] [drm:intel_dump_pipe_config], port clock: 0 [ 1.215412] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.215417] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.215422] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.215427] [drm:intel_dump_pipe_config], ips: 0 [ 1.215431] [drm:intel_dump_pipe_config], double wide: 0 [ 1.215438] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B [ 1.215443] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.215448] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.215454] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.215460] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.215464] [drm:intel_dump_pipe_config], requested mode: [ 1.215471] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.215475] [drm:intel_dump_pipe_config], adjusted mode: [ 1.215482] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.215489] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.215493] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.215498] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.215504] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000 [ 1.215509] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.215514] [drm:intel_dump_pipe_config], ips: 0 [ 1.215518] [drm:intel_dump_pipe_config], double wide: 0 [ 1.215525] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.215532] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1] [ 1.215539] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.215546] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.215552] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.215558] [drm:check_crtc_state], [CRTC:3] [ 1.215563] [drm:check_crtc_state], [CRTC:4] [ 1.215597] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 1.215602] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 1.215618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 1.215626] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.215632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 1.215637] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 1.220068] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.224063] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.224069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.224074] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.224079] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.224441] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.224446] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.224451] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.224456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 1.224462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.224467] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 1.224474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 1.224478] [drm:drm_setup_crtcs], [ 1.224484] [drm:drm_enable_connectors], connector 5 enabled? yes [ 1.224489] [drm:drm_enable_connectors], connector 11 enabled? no [ 1.224494] [drm:drm_enable_connectors], connector 14 enabled? no [ 1.224499] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 1.224503] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 1.224508] [drm:drm_target_preferred], found mode 1366x768 [ 1.224513] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.224520] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 1.224529] [drm:intelfb_create], no BIOS fb, allocating a new one [ 1.224534] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000 [ 1.224542] [drm:i915_pages_create_for_stolen], offset=0x40000, size=4227072 [ 1.226473] [drm:intelfb_create], allocated 1366x768 fb: 0x00046000, bo f52ac800 [ 1.227177] fbcon: inteldrmfb (fb0) is primary device [ 1.229195] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.229200] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.229203] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.229208] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.229214] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.229217] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.229222] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.229226] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [CRTC:4] [ 1.229228] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 1.229231] [drm:intel_modeset_stage_output_state], crtc enabled, full mode switch [ 1.229236] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.229240] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains [ 1.229266] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18) [ 1.229271] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 [ 1.229274] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.229276] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.229279] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 [ 1.229284] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.229288] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.229290] [drm:intel_dump_pipe_config], requested mode: [ 1.229296] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.229298] [drm:intel_dump_pipe_config], adjusted mode: [ 1.229304] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.229309] [drm:intel_dump_crtc_timings], crtc timings: 71900 1366 1414 1480 1486 768 774 782 806, type: 0x48 flags: 0xa [ 1.229311] [drm:intel_dump_pipe_config], port clock: 71900 [ 1.229314] [drm:intel_dump_pipe_config], pipe src size: 1366x768 [ 1.229318] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.229321] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.229324] [drm:intel_dump_pipe_config], ips: 0 [ 1.229326] [drm:intel_dump_pipe_config], double wide: 0 [ 1.229482] [drm:i9xx_set_pipeconf], disabling CxSR downclocking [ 1.229533] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5504 [ 1.229542] [drm:intel_update_fbc], no output, disabling [ 1.229550] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1366x768] [ 1.230439] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6 [ 1.230444] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6 [ 1.284134] [drm:intel_update_fbc], disabled per chip default [ 1.284145] [drm:intel_panel_enable_backlight], pipe A [ 1.284175] ------------[ cut here ]------------ [ 1.284184] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_panel.c:714 i965_enable_backlight+0x4a/0x119() [ 1.284185] backlight already enabled [ 1.284187] Modules linked in: [ 1.284192] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8AS+ #2 [ 1.284194] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 1.284203] 00000000 00000000 f507ba34 c07e66d6 f507ba5c f507ba4c c042c880 c068067f [ 1.284211] f6e3c000 f6d95000 00000000 f507ba64 c042c8bd 00000009 f507ba5c c096322a [ 1.284218] f507ba78 f507ba88 c068067f c09631eb 000002ca c096322a e0000000 f6e3dc44 [ 1.284220] Call Trace: [ 1.284226] [] dump_stack+0x48/0x69 [ 1.284232] [] warn_slowpath_common+0x5c/0x73 [ 1.284237] [] ? i965_enable_backlight+0x4a/0x119 [ 1.284241] [] warn_slowpath_fmt+0x26/0x2a [ 1.284246] [] i965_enable_backlight+0x4a/0x119 [ 1.284251] [] intel_panel_enable_backlight+0x98/0xb1 [ 1.284256] [] intel_enable_lvds+0xf0/0x10d [ 1.284260] [] i9xx_crtc_enable+0x305/0x31b [ 1.284267] [] ? gen4_write64+0x3f/0x3f [ 1.284271] [] __intel_set_mode+0xe9e/0xf60 [ 1.284275] [] intel_set_mode+0x12/0x2a [ 1.284280] [] intel_crtc_set_config+0x663/0x958 [ 1.284286] [] drm_mode_set_config_internal+0x39/0x90 [ 1.284290] [] drm_fb_helper_set_par+0x49/0x88 [ 1.284296] [] fbcon_init+0x2c9/0x3a5 [ 1.284302] [] visual_init+0x9a/0xed [ 1.284306] [] do_bind_con_driver+0x13a/0x22f [ 1.284311] [] do_take_over_console+0x108/0x130 [ 1.284316] [] do_fbcon_takeover+0x4c/0x90 [ 1.284320] [] fbcon_event_notify+0x273/0x551 [ 1.284325] [] ? __blocking_notifier_call_chain+0x1e/0x4a [ 1.284330] [] notifier_call_chain+0x25/0x46 [ 1.284335] [] __blocking_notifier_call_chain+0x32/0x4a [ 1.284339] [] blocking_notifier_call_chain+0xc/0xe [ 1.284344] [] fb_notifier_call_chain+0x11/0x16 [ 1.284349] [] register_framebuffer+0x1fe/0x251 [ 1.284354] [] drm_fb_helper_initial_config+0x31d/0x3a9 [ 1.284360] [] ? _raw_spin_unlock_irqrestore+0x33/0x49 [ 1.284365] [] intel_fbdev_initial_config+0x19/0x1b [ 1.284370] [] i915_driver_load+0x8d9/0xb0f [ 1.284376] [] drm_dev_register+0xb6/0x119 [ 1.284381] [] drm_get_pci_dev+0xe7/0x182 [ 1.284385] [] i915_pci_probe+0x39/0x42 [ 1.284389] [] pci_device_probe+0x57/0x9f [ 1.284395] [] driver_probe_device+0x7f/0x16f [ 1.284399] [] __driver_attach+0x4e/0x6a [ 1.284403] [] bus_for_each_dev+0x39/0x65 [ 1.284407] [] driver_attach+0x14/0x16 [ 1.284412] [] ? __device_attach+0x2c/0x2c [ 1.284416] [] bus_add_driver+0xb6/0x183 [ 1.284420] [] driver_register+0x6f/0xa4 [ 1.284424] [] __pci_register_driver+0x45/0x48 [ 1.284429] [] ? drm_core_init+0xe8/0xe8 [ 1.284434] [] drm_pci_init+0x51/0xc5 [ 1.284438] [] ? drm_core_init+0xe8/0xe8 [ 1.284442] [] i915_init+0x62/0x64 [ 1.284446] [] do_one_initcall+0x79/0x102 [ 1.284450] [] ? parameq+0x1c/0x20 [ 1.284454] [] ? parse_args+0x166/0x204 [ 1.284460] [] kernel_init_freeable+0x16c/0x1f6 [ 1.284465] [] kernel_init+0x8/0xda [ 1.284469] [] ret_from_kernel_thread+0x1b/0x28 [ 1.284474] [] ? rest_init+0xa1/0xa1 [ 1.284531] ---[ end trace 98d010b98bd69470 ]--- [ 1.284535] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348 [ 1.284606] [drm:asle_work], No request on ASLC interrupt 0x00000000 [ 1.284620] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.284626] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1] [ 1.284632] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.284636] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.284641] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.284645] [drm:check_crtc_state], [CRTC:3] [ 1.284668] [drm:check_crtc_state], [CRTC:4] [ 1.284692] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0) [ 1.284693] ------------[ cut here ]------------ [ 1.284699] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_display.c:9555 check_crtc_state+0x7b1/0x7f3() [ 1.284701] pipe state doesn't match! [ 1.284704] Modules linked in: [ 1.284708] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc8AS+ #2 [ 1.284710] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 1.284723] 00000000 00000000 f507b890 c07e66d6 f507b8b8 f507b8a8 c042c880 c0662aea [ 1.284735] f50d9000 f5144800 00000000 f507b8c0 c042c8bd 00000009 f507b8b8 c095db4f [ 1.284747] f507b8d4 f507bb28 c0662aea c095c87c 00002553 c095db4f f5144b90 f5144b04 [ 1.284749] Call Trace: [ 1.284754] [] dump_stack+0x48/0x69 [ 1.284760] [] warn_slowpath_common+0x5c/0x73 [ 1.284765] [] ? check_crtc_state+0x7b1/0x7f3 [ 1.284770] [] warn_slowpath_fmt+0x26/0x2a [ 1.284775] [] check_crtc_state+0x7b1/0x7f3 [ 1.284786] [] intel_modeset_check_state+0x2fb/0x552 [ 1.284791] [] intel_set_mode+0x21/0x2a [ 1.284797] [] intel_crtc_set_config+0x663/0x958 [ 1.284802] [] drm_mode_set_config_internal+0x39/0x90 [ 1.284808] [] drm_fb_helper_set_par+0x49/0x88 [ 1.284813] [] fbcon_init+0x2c9/0x3a5 [ 1.284819] [] visual_init+0x9a/0xed [ 1.284825] [] do_bind_con_driver+0x13a/0x22f [ 1.284830] [] do_take_over_console+0x108/0x130 [ 1.284836] [] do_fbcon_takeover+0x4c/0x90 [ 1.284841] [] fbcon_event_notify+0x273/0x551 [ 1.284846] [] ? __blocking_notifier_call_chain+0x1e/0x4a [ 1.284852] [] notifier_call_chain+0x25/0x46 [ 1.284857] [] __blocking_notifier_call_chain+0x32/0x4a [ 1.284862] [] blocking_notifier_call_chain+0xc/0xe [ 1.284868] [] fb_notifier_call_chain+0x11/0x16 [ 1.284874] [] register_framebuffer+0x1fe/0x251 [ 1.284880] [] drm_fb_helper_initial_config+0x31d/0x3a9 [ 1.284886] [] ? _raw_spin_unlock_irqrestore+0x33/0x49 [ 1.284892] [] intel_fbdev_initial_config+0x19/0x1b [ 1.284897] [] i915_driver_load+0x8d9/0xb0f [ 1.284904] [] drm_dev_register+0xb6/0x119 [ 1.284909] [] drm_get_pci_dev+0xe7/0x182 [ 1.284914] [] i915_pci_probe+0x39/0x42 [ 1.284919] [] pci_device_probe+0x57/0x9f [ 1.284925] [] driver_probe_device+0x7f/0x16f [ 1.284930] [] __driver_attach+0x4e/0x6a [ 1.284935] [] bus_for_each_dev+0x39/0x65 [ 1.284940] [] driver_attach+0x14/0x16 [ 1.284945] [] ? __device_attach+0x2c/0x2c [ 1.284950] [] bus_add_driver+0xb6/0x183 [ 1.284955] [] driver_register+0x6f/0xa4 [ 1.284960] [] __pci_register_driver+0x45/0x48 [ 1.284965] [] ? drm_core_init+0xe8/0xe8 [ 1.284971] [] drm_pci_init+0x51/0xc5 [ 1.284976] [] ? drm_core_init+0xe8/0xe8 [ 1.284981] [] i915_init+0x62/0x64 [ 1.284985] [] do_one_initcall+0x79/0x102 [ 1.284990] [] ? parameq+0x1c/0x20 [ 1.284995] [] ? parse_args+0x166/0x204 [ 1.285001] [] kernel_init_freeable+0x16c/0x1f6 [ 1.285006] [] kernel_init+0x8/0xda [ 1.285011] [] ret_from_kernel_thread+0x1b/0x28 [ 1.285016] [] ? rest_init+0xa1/0xa1 [ 1.285019] ---[ end trace 98d010b98bd69471 ]--- [ 1.285022] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B [ 1.285025] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.285028] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.285033] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.285037] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.285039] [drm:intel_dump_pipe_config], requested mode: [ 1.285044] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.285047] [drm:intel_dump_pipe_config], adjusted mode: [ 1.285051] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.285056] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.285059] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.285062] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.285066] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00000000 [ 1.285069] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.285072] [drm:intel_dump_pipe_config], ips: 0 [ 1.285075] [drm:intel_dump_pipe_config], double wide: 0 [ 1.285078] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B [ 1.285080] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.285083] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.285088] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.285092] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.285094] [drm:intel_dump_pipe_config], requested mode: [ 1.285099] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.285101] [drm:intel_dump_pipe_config], adjusted mode: [ 1.285106] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.285111] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.285113] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.285116] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.285120] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000 [ 1.285123] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.285126] [drm:intel_dump_pipe_config], ips: 0 [ 1.285128] [drm:intel_dump_pipe_config], double wide: 0 [ 1.285135] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 1.285141] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 1.285145] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [NOCRTC] [ 1.285147] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 1.285151] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.285154] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 1.285156] [drm:intel_modeset_stage_output_state], crtc disabled, full mode switch [ 1.285161] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2 [ 1.300131] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000 [ 1.300141] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6 [ 1.300147] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6 [ 1.300167] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.300174] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.300178] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.300183] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.300187] [drm:check_crtc_state], [CRTC:3] [ 1.300209] [drm:check_crtc_state], [CRTC:4] [ 1.300254] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.300260] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.300265] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.312725] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.312731] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.312735] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.324868] Console: switching to colour frame buffer device 170x48 [ 1.324879] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.324885] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.324889] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.693559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.696480] i915 0000:00:02.0: registered panic notifier [ 1.699935] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.703936] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.707088] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.714284] loop: module loaded [ 1.717566] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 1.720874] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.724298] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 1.727819] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.731412] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 1.735134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.738920] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.743020] ahci 0000:00:1f.2: version 3.0 [ 1.743487] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.743619] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.747453] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.751294] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.757533] scsi0 : ahci [ 1.761909] scsi1 : ahci [ 1.765981] scsi2 : ahci [ 1.770044] scsi3 : ahci [ 1.773901] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 41 [ 1.777679] ata2: DUMMY [ 1.781421] ata3: DUMMY [ 1.785107] ata4: DUMMY [ 1.789166] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.797506] i8042: Detected active multiplexing controller, rev 1.1 [ 1.803432] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.807932] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.811922] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.815843] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.819721] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.823901] mousedev: PS/2 mouse device common for all mice [ 1.829356] rtc_cmos 00:02: RTC can wake from S4 [ 1.833942] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.837807] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.841707] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.845648] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860) [ 1.850178] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.854187] iTCO_vendor_support: vendor-support=0 [ 1.858587] asus_laptop: Asus Laptop Support version 0.42 [ 1.862967] asus_laptop: UL20A model detected [ 1.868892] [drm:asle_set_backlight], bclp = 0x800000b3 [ 1.868912] [drm:asle_set_backlight], updating opregion backlight 179/255 [ 1.868929] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348 [ 1.868996] [drm:asle_work], No request on ASLC interrupt 0x00000000 [ 1.869136] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5 [ 1.876794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.052133] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.057400] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.061731] TCP: cubic registered [ 2.065941] Initializing XFRM netlink socket [ 2.070160] NET: Registered protocol family 17 [ 2.074389] NET: Registered protocol family 15 [ 2.079317] Using IPI No-Shortcut mode [ 2.084559] registered taskstats version 1 [ 2.089693] Magic number: 14:414:663 [ 2.093714] rtc_cmos 00:02: setting system clock to 2014-01-28 02:41:29 UTC (1390876889) [ 2.099642] PM: Hibernation image not present or could not be loaded. [ 2.108361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.117020] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.123258] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2.123265] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.178194] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 2.181689] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.193554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.236550] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2.236562] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.243835] ata1.00: configured for UDMA/133 [ 2.251210] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 2.257867] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.258510] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.264755] sd 0:0:0:0: [sda] Write Protect is off [ 2.270347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.270474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.365384] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 2.371706] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.375577] Freeing unused kernel memory: 388K (c0a12000 - c0a73000) [ 2.379608] Write protecting the kernel text: 4024k [ 2.383362] Write protecting the kernel read-only data: 1868k [ 2.405848] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.410492] systemd[1]: Running in initial RAM disk. [ 2.427551] systemd[1]: Failed to insert module 'autofs4' [ 2.431575] systemd[1]: No hostname configured. [ 2.435581] systemd[1]: Set hostname to . [ 2.440080] random: systemd urandom read with 20 bits of entropy available [ 2.444106] systemd[1]: Initializing machine ID from random generator. [ 2.473458] systemd[1]: Starting Encrypted Volumes. [ 2.482003] systemd[1]: Reached target Encrypted Volumes. [ 2.486208] systemd[1]: Starting udev Kernel Socket. [ 2.494631] systemd[1]: Listening on udev Kernel Socket. [ 2.498776] systemd[1]: Starting udev Control Socket. [ 2.507174] systemd[1]: Listening on udev Control Socket. [ 2.511122] systemd[1]: Starting Journal Socket. [ 2.519523] systemd[1]: Listening on Journal Socket. [ 2.523360] systemd[1]: Starting dracut cmdline hook... [ 2.534303] systemd[1]: Started Load Kernel Modules. [ 2.538225] systemd[1]: Starting Journal Service... [ 2.554680] systemd[1]: Started Journal Service. [ 2.559550] systemd[1]: Starting Sockets. [ 2.567501] systemd[1]: Reached target Sockets. [ 2.571314] systemd[1]: Starting Swap. [ 2.579066] systemd[1]: Reached target Swap. [ 2.582759] systemd[1]: Starting Local File Systems. [ 2.590455] systemd[1]: Reached target Local File Systems. [ 2.836522] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 2.836530] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.836534] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.887684] systemd-udevd[126]: starting version 197 [ 2.982862] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854 [ 3.025480] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 3.321307] [drm:i915_gem_open], [ 3.321605] [drm:intel_crtc_cursor_set], cursor off [ 3.321622] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 3.321631] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.321637] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.321644] [drm:intel_crtc_cursor_set], cursor off [ 3.321650] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3.321656] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.321662] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.321720] [drm:i915_gem_open], [ 3.321758] [drm:intel_crtc_cursor_set], cursor off [ 3.321766] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 3.321772] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.321778] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.321784] [drm:intel_crtc_cursor_set], cursor off [ 3.321789] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3.321796] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.321801] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.321848] [drm:i915_gem_open], [ 3.322163] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.322198] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.322221] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.322234] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 3.322241] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 3.322260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 3.322268] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 3.322278] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.345139] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.345152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.345158] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.352088] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.356106] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.356117] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.356122] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.356128] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.356481] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.356486] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.356490] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.356497] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 3.356514] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.356521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.356527] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.364067] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.368211] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.368219] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.368224] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.368229] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.368584] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.368589] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.368594] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.368599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 3.368622] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.368630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 3.368635] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 3.368642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 3.368650] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.368656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 3.368661] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 3.368666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 3.368909] [drm:drm_mode_addfb], [FB:19] [ 4.904411] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.930098] random: nonblocking pool is initialized [ 5.312789] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 5.704976] systemd-journald[65]: Received SIGTERM [ 7.367551] type=1404 audit(1390876894.772:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 7.771924] SELinux: 2048 avtab hash slots, 96503 rules. [ 7.836344] SELinux: 2048 avtab hash slots, 96503 rules. [ 7.907455] SELinux: 8 users, 83 roles, 4702 types, 269 bools, 1 sens, 1024 cats [ 7.907464] SELinux: 83 classes, 96503 rules [ 7.931321] SELinux: Completing initialization. [ 7.931327] SELinux: Setting up existing superblocks. [ 7.931530] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.931704] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 7.931892] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 7.931991] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 7.932395] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.932578] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 7.934907] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 7.935059] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 7.935602] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 7.935757] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 7.935901] SELinux: initialized (dev aio, type aio), not configured for labeling [ 7.936023] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 7.936241] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 7.936393] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 7.936557] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.940482] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 7.940529] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.940549] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.940832] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.941030] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941095] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941149] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941331] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941406] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941439] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941465] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941539] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.941683] SELinux: initialized (dev sda6, type ext4), uses xattr [ 8.004716] type=1403 audit(1390876895.408:3): policy loaded auid=4294967295 ses=4294967295 [ 8.178538] systemd[1]: Successfully loaded SELinux policy in 880.547ms. [ 8.509252] systemd[1]: Relabelled /dev and /run in 51.222ms. [ 11.914586] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 12.155726] systemd-journald[282]: Vacuuming done, freed 0 bytes [ 13.257472] EXT4-fs (sda6): re-mounted. Opts: (null) [ 13.628240] systemd-udevd[317]: starting version 208 [ 14.865342] ACPI: bus type USB registered [ 14.869790] usbcore: registered new interface driver usbfs [ 14.874195] usbcore: registered new interface driver hub [ 14.879590] usbcore: registered new device driver usb [ 14.901618] atl1c 0000:02:00.0: version 1.0.1.1-NAPI [ 14.930694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 14.935848] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96 [ 14.945945] uhci_hcd: USB Universal Host Controller Interface driver [ 14.949688] ehci-pci: EHCI PCI platform driver [ 14.949782] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.950054] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 14.950097] uhci_hcd 0000:00:1a.0: detected 2 ports [ 14.950129] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.950132] uhci_hcd 0000:00:1a.0: Performing full reset [ 14.950152] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 14.950277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 14.951209] usb usb1: default language 0x0409 [ 14.951271] usb usb1: udev 1, busnum 1, minor = 0 [ 14.951276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.951280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.951283] usb usb1: Product: UHCI Host Controller [ 14.951287] usb usb1: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.951290] usb usb1: SerialNumber: 0000:00:1a.0 [ 14.952829] usb usb1: usb_probe_device [ 14.952834] usb usb1: configuration #1 chosen from 1 choice [ 14.953367] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 14.953681] hub 1-0:1.0: usb_probe_interface [ 14.953685] hub 1-0:1.0: usb_probe_interface - got id [ 14.953705] hub 1-0:1.0: USB hub found [ 14.954009] hub 1-0:1.0: 2 ports detected [ 14.954012] hub 1-0:1.0: standalone hub [ 14.954016] hub 1-0:1.0: no power switching (usb 1.0) [ 14.954019] hub 1-0:1.0: individual port over-current protection [ 14.954023] hub 1-0:1.0: power on to power good time: 2ms [ 14.954495] hub 1-0:1.0: local power source is good [ 14.956502] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.956507] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 14.957782] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.957802] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 14.957815] uhci_hcd 0000:00:1a.1: detected 2 ports [ 14.957823] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.957826] uhci_hcd 0000:00:1a.1: Performing full reset [ 14.957845] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 14.957896] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 14.958084] usb usb2: default language 0x0409 [ 14.958146] usb usb2: udev 1, busnum 2, minor = 128 [ 14.958151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.958155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.958158] usb usb2: Product: UHCI Host Controller [ 14.958162] usb usb2: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.958165] usb usb2: SerialNumber: 0000:00:1a.1 [ 14.958724] usb usb2: usb_probe_device [ 14.958729] usb usb2: configuration #1 chosen from 1 choice [ 14.958773] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 14.958892] hub 2-0:1.0: usb_probe_interface [ 14.958896] hub 2-0:1.0: usb_probe_interface - got id [ 14.958906] hub 2-0:1.0: USB hub found [ 14.958938] hub 2-0:1.0: 2 ports detected [ 14.958942] hub 2-0:1.0: standalone hub [ 14.958945] hub 2-0:1.0: no power switching (usb 1.0) [ 14.958948] hub 2-0:1.0: individual port over-current protection [ 14.958952] hub 2-0:1.0: power on to power good time: 2ms [ 14.958998] hub 2-0:1.0: local power source is good [ 14.960595] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.960599] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 14.961239] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 14.961258] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 14.961272] uhci_hcd 0000:00:1a.2: detected 2 ports [ 14.961280] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.961283] uhci_hcd 0000:00:1a.2: Performing full reset [ 14.961302] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 14.961351] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480 [ 14.961538] usb usb3: default language 0x0409 [ 14.961600] usb usb3: udev 1, busnum 3, minor = 256 [ 14.961605] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.961609] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.961612] usb usb3: Product: UHCI Host Controller [ 14.961615] usb usb3: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.961618] usb usb3: SerialNumber: 0000:00:1a.2 [ 14.962038] usb usb3: usb_probe_device [ 14.962043] usb usb3: configuration #1 chosen from 1 choice [ 14.962085] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 14.962197] hub 3-0:1.0: usb_probe_interface [ 14.962201] hub 3-0:1.0: usb_probe_interface - got id [ 14.962211] hub 3-0:1.0: USB hub found [ 14.962242] hub 3-0:1.0: 2 ports detected [ 14.962246] hub 3-0:1.0: standalone hub [ 14.962249] hub 3-0:1.0: no power switching (usb 1.0) [ 14.962252] hub 3-0:1.0: individual port over-current protection [ 14.962256] hub 3-0:1.0: power on to power good time: 2ms [ 14.962302] hub 3-0:1.0: local power source is good [ 14.963873] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information. [ 14.963877] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 14.964524] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.964544] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 14.964557] uhci_hcd 0000:00:1d.0: detected 2 ports [ 14.964565] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.964568] uhci_hcd 0000:00:1d.0: Performing full reset [ 14.964587] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 14.964636] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 14.964824] usb usb4: default language 0x0409 [ 14.964887] usb usb4: udev 1, busnum 4, minor = 384 [ 14.964891] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.964895] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.964898] usb usb4: Product: UHCI Host Controller [ 14.964901] usb usb4: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.964904] usb usb4: SerialNumber: 0000:00:1d.0 [ 14.965420] usb usb4: usb_probe_device [ 14.965425] usb usb4: configuration #1 chosen from 1 choice [ 14.965469] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 14.965582] hub 4-0:1.0: usb_probe_interface [ 14.965585] hub 4-0:1.0: usb_probe_interface - got id [ 14.965595] hub 4-0:1.0: USB hub found [ 14.965626] hub 4-0:1.0: 2 ports detected [ 14.965630] hub 4-0:1.0: standalone hub [ 14.965633] hub 4-0:1.0: no power switching (usb 1.0) [ 14.965636] hub 4-0:1.0: individual port over-current protection [ 14.965640] hub 4-0:1.0: power on to power good time: 2ms [ 14.965686] hub 4-0:1.0: local power source is good [ 14.967249] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 14.967863] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.967881] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 14.967895] uhci_hcd 0000:00:1d.1: detected 2 ports [ 14.967903] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.967906] uhci_hcd 0000:00:1d.1: Performing full reset [ 14.967925] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 14.967940] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080 [ 14.968145] usb usb5: default language 0x0409 [ 14.968207] usb usb5: udev 1, busnum 5, minor = 512 [ 14.968211] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.968215] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.968218] usb usb5: Product: UHCI Host Controller [ 14.968222] usb usb5: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.968225] usb usb5: SerialNumber: 0000:00:1d.1 [ 14.968651] usb usb5: usb_probe_device [ 14.968656] usb usb5: configuration #1 chosen from 1 choice [ 14.968700] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 14.968809] hub 5-0:1.0: usb_probe_interface [ 14.968813] hub 5-0:1.0: usb_probe_interface - got id [ 14.968823] hub 5-0:1.0: USB hub found [ 14.968854] hub 5-0:1.0: 2 ports detected [ 14.968858] hub 5-0:1.0: standalone hub [ 14.968861] hub 5-0:1.0: no power switching (usb 1.0) [ 14.968864] hub 5-0:1.0: individual port over-current protection [ 14.968868] hub 5-0:1.0: power on to power good time: 2ms [ 14.968914] hub 5-0:1.0: local power source is good [ 14.970479] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 14.971099] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.971118] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 14.971131] uhci_hcd 0000:00:1d.2: detected 2 ports [ 14.971139] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.971142] uhci_hcd 0000:00:1d.2: Performing full reset [ 14.971161] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 14.971209] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 14.971422] usb usb6: default language 0x0409 [ 14.971484] usb usb6: udev 1, busnum 6, minor = 640 [ 14.971488] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.971492] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.971495] usb usb6: Product: UHCI Host Controller [ 14.971499] usb usb6: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.971502] usb usb6: SerialNumber: 0000:00:1d.2 [ 14.971916] usb usb6: usb_probe_device [ 14.971921] usb usb6: configuration #1 chosen from 1 choice [ 14.971963] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 14.972087] hub 6-0:1.0: usb_probe_interface [ 14.972091] hub 6-0:1.0: usb_probe_interface - got id [ 14.972101] hub 6-0:1.0: USB hub found [ 14.972132] hub 6-0:1.0: 2 ports detected [ 14.972135] hub 6-0:1.0: standalone hub [ 14.972138] hub 6-0:1.0: no power switching (usb 1.0) [ 14.972141] hub 6-0:1.0: individual port over-current protection [ 14.972146] hub 6-0:1.0: power on to power good time: 2ms [ 14.972191] hub 6-0:1.0: local power source is good [ 14.973766] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 15.157425] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.157429] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 15.157468] hub 2-0:1.0: port 1: status 0101 change 0001 [ 15.158385] hub 1-0:1.0: hub_suspend [ 15.158747] usb usb1: bus auto-suspend, wakeup 1 [ 15.158769] usb usb1: suspend_rh [ 15.158865] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.158889] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.158905] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.158920] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.158945] hub 3-0:1.0: hub_suspend [ 15.159201] usb usb3: bus auto-suspend, wakeup 1 [ 15.159211] usb usb3: suspend_rh [ 15.159258] hub 4-0:1.0: hub_suspend [ 15.159607] usb usb4: bus auto-suspend, wakeup 1 [ 15.159617] usb usb4: suspend_rh [ 15.159666] hub 5-0:1.0: hub_suspend [ 15.159686] usb usb5: bus auto-suspend, wakeup 1 [ 15.159696] usb usb5: suspend_rh [ 15.159739] hub 6-0:1.0: hub_suspend [ 15.159775] usb usb6: bus auto-suspend, wakeup 1 [ 15.159781] usb usb6: suspend_rh [ 15.166329] usb usb1: usb auto-resume [ 15.166347] usb usb1: wakeup_rh [ 15.188203] hub 1-0:1.0: hub_resume [ 15.188951] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.189085] usb usb1: unregistering interface 1-0:1.0 [ 15.199838] uhci_hcd 0000:00:1a.0: shutdown urb f4a37980 ep1in-intr [ 15.203752] usb usb1: usb_disable_device nuking non-ep0 URBs [ 15.204854] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 15.208156] Copyright(c) 2003-2013 Intel Corporation [ 15.209034] usb usb1: bus auto-suspend, wakeup 0 [ 15.209039] usb usb1: suspend_rh [ 15.209070] usb usb2: unregistering interface 2-0:1.0 [ 15.210019] usb usb2: usb_disable_device nuking non-ep0 URBs [ 15.212410] usb usb2: bus auto-suspend, wakeup 0 [ 15.212422] usb usb2: suspend_rh [ 15.212461] usb usb3: usb auto-resume [ 15.212471] usb usb3: wakeup_rh [ 15.214762] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X [ 15.236177] hub 3-0:1.0: hub_resume [ 15.236694] usb usb3: unregistering interface 3-0:1.0 [ 15.254273] uhci_hcd 0000:00:1a.2: shutdown urb f48c7580 ep1in-intr [ 15.270377] usb usb3: usb_disable_device nuking non-ep0 URBs [ 15.270791] usb usb3: bus auto-suspend, wakeup 0 [ 15.270802] usb usb3: suspend_rh [ 15.270853] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 15.276340] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 15.280587] ehci-pci 0000:00:1a.7: debug port 1 [ 15.283668] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 15.283681] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 15.283922] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 15.289904] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 15.289916] ehci-pci 0000:00:1a.7: supports USB remote wakeup [ 15.289959] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00 [ 15.293459] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 15.299409] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm [ 15.311066] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 15.315936] usb usb7: default language 0x0409 [ 15.316103] usb usb7: udev 1, busnum 7, minor = 768 [ 15.316115] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.319286] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.326071] usb usb7: Product: EHCI Host Controller [ 15.329268] usb usb7: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd [ 15.332793] usb usb7: SerialNumber: 0000:00:1a.7 [ 15.343005] usb usb7: usb_probe_device [ 15.343019] usb usb7: configuration #1 chosen from 1 choice [ 15.348664] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 15.351128] hub 7-0:1.0: usb_probe_interface [ 15.351136] hub 7-0:1.0: usb_probe_interface - got id [ 15.351482] hub 7-0:1.0: USB hub found [ 15.357834] hub 7-0:1.0: 6 ports detected [ 15.361000] hub 7-0:1.0: standalone hub [ 15.361010] hub 7-0:1.0: no power switching (usb 1.0) [ 15.361016] hub 7-0:1.0: individual port over-current protection [ 15.361027] hub 7-0:1.0: power on to power good time: 20ms [ 15.362005] hub 7-0:1.0: local power source is good [ 15.381721] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 15.384980] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 15.388132] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 15.391233] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 15.396668] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 15.460954] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.467116] usb usb7: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 15.467129] usb usb7: usb port3's DeviceRemovable is changed to 1 according to platform information. [ 15.467135] usb usb7: usb port6's DeviceRemovable is changed to 1 according to platform information. [ 15.467145] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 15.481433] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 15.481451] usb usb1: usb auto-resume [ 15.481458] usb usb1: wakeup_rh [ 15.504378] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 15.504574] hub 1-0:1.0: usb_probe_interface [ 15.504581] hub 1-0:1.0: usb_probe_interface - got id [ 15.504601] hub 1-0:1.0: USB hub found [ 15.510934] hub 1-0:1.0: 2 ports detected [ 15.514190] hub 1-0:1.0: standalone hub [ 15.514201] hub 1-0:1.0: no power switching (usb 1.0) [ 15.514206] hub 1-0:1.0: individual port over-current protection [ 15.514217] hub 1-0:1.0: power on to power good time: 2ms [ 15.514916] hub 1-0:1.0: local power source is good [ 15.517170] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 15.517182] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 15.527594] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 15.527617] usb usb2: usb auto-resume [ 15.527623] usb usb2: wakeup_rh [ 15.548490] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 15.548938] hub 2-0:1.0: usb_probe_interface [ 15.548948] hub 2-0:1.0: usb_probe_interface - got id [ 15.548972] hub 2-0:1.0: USB hub found [ 15.552356] hub 2-0:1.0: 2 ports detected [ 15.555366] hub 2-0:1.0: standalone hub [ 15.555371] hub 2-0:1.0: no power switching (usb 1.0) [ 15.555376] hub 2-0:1.0: individual port over-current protection [ 15.555387] hub 2-0:1.0: power on to power good time: 2ms [ 15.555465] hub 2-0:1.0: local power source is good [ 15.557658] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 15.557669] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 15.558350] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 15.558365] usb usb3: usb auto-resume [ 15.558371] usb usb3: wakeup_rh [ 15.568345] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 15.568383] hub 7-0:1.0: port 3: status 0501 change 0001 [ 15.580437] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 15.580872] hub 3-0:1.0: usb_probe_interface [ 15.580883] hub 3-0:1.0: usb_probe_interface - got id [ 15.580900] hub 3-0:1.0: USB hub found [ 15.584226] hub 3-0:1.0: 2 ports detected [ 15.587250] hub 3-0:1.0: standalone hub [ 15.587255] hub 3-0:1.0: no power switching (usb 1.0) [ 15.587264] hub 3-0:1.0: individual port over-current protection [ 15.587271] hub 3-0:1.0: power on to power good time: 2ms [ 15.587708] hub 3-0:1.0: local power source is good [ 15.589871] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information. [ 15.589882] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 15.590951] usb usb4: usb auto-resume [ 15.590963] usb usb4: wakeup_rh [ 15.612082] hub 4-0:1.0: hub_resume [ 15.612310] usb usb4: unregistering interface 4-0:1.0 [ 15.612322] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.612603] uhci_hcd 0000:00:1d.0: shutdown urb f48c7000 ep1in-intr [ 15.613126] usb usb4: usb_disable_device nuking non-ep0 URBs [ 15.613181] usb usb4: bus auto-suspend, wakeup 0 [ 15.613188] usb usb4: suspend_rh [ 15.613225] usb usb5: usb auto-resume [ 15.613232] usb usb5: wakeup_rh [ 15.638390] hub 5-0:1.0: hub_resume [ 15.638514] usb usb5: unregistering interface 5-0:1.0 [ 15.638899] uhci_hcd 0000:00:1d.1: shutdown urb f6f76280 ep1in-intr [ 15.639558] usb usb5: usb_disable_device nuking non-ep0 URBs [ 15.642736] usb usb5: bus auto-suspend, wakeup 0 [ 15.642744] usb usb5: suspend_rh [ 15.642783] usb usb6: usb auto-resume [ 15.642789] usb usb6: wakeup_rh [ 15.656085] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 15.664088] hub 6-0:1.0: hub_resume [ 15.664195] usb usb6: unregistering interface 6-0:1.0 [ 15.664554] uhci_hcd 0000:00:1d.2: shutdown urb f6f76b80 ep1in-intr [ 15.665260] usb usb6: usb_disable_device nuking non-ep0 URBs [ 15.665561] usb usb6: bus auto-suspend, wakeup 0 [ 15.665568] usb usb6: suspend_rh [ 15.665609] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 15.668779] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 15.671874] ehci-pci 0000:00:1d.7: debug port 1 [ 15.675013] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 15.675026] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 15.675159] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 15.677935] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.679066] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 15.679070] ehci-pci 0000:00:1d.7: supports USB remote wakeup [ 15.679090] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800 [ 15.679098] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 15.688076] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 15.691601] usb usb8: default language 0x0409 [ 15.691711] usb usb8: udev 1, busnum 8, minor = 896 [ 15.691723] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.694843] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.697942] usb usb8: Product: EHCI Host Controller [ 15.701028] usb usb8: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd [ 15.704254] usb usb8: SerialNumber: 0000:00:1d.7 [ 15.708463] usb usb8: usb_probe_device [ 15.708471] usb usb8: configuration #1 chosen from 1 choice [ 15.709555] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 15.711010] hub 8-0:1.0: usb_probe_interface [ 15.711018] hub 8-0:1.0: usb_probe_interface - got id [ 15.711036] hub 8-0:1.0: USB hub found [ 15.714447] hub 8-0:1.0: 6 ports detected [ 15.717625] hub 8-0:1.0: standalone hub [ 15.717635] hub 8-0:1.0: no power switching (usb 1.0) [ 15.717640] hub 8-0:1.0: individual port over-current protection [ 15.717652] hub 8-0:1.0: power on to power good time: 20ms [ 15.717973] hub 8-0:1.0: local power source is good [ 15.725545] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 15.726133] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 15.726149] usb usb4: usb auto-resume [ 15.726155] usb usb4: wakeup_rh [ 15.739082] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.742858] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 15.755635] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 15.756105] hub 4-0:1.0: usb_probe_interface [ 15.756116] hub 4-0:1.0: usb_probe_interface - got id [ 15.756132] hub 4-0:1.0: USB hub found [ 15.758704] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.758899] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.760016] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 15.770617] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 15.781823] hub 4-0:1.0: 2 ports detected [ 15.785068] hub 4-0:1.0: standalone hub [ 15.785077] hub 4-0:1.0: no power switching (usb 1.0) [ 15.785082] hub 4-0:1.0: individual port over-current protection [ 15.785093] hub 4-0:1.0: power on to power good time: 2ms [ 15.785162] hub 4-0:1.0: local power source is good [ 15.795422] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 15.795695] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.795921] hub 7-0:1.0: state 7 ports 6 chg 0008 evt 0000 [ 15.796254] hub 7-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 15.796657] hub 1-0:1.0: hub_suspend [ 15.800045] usb usb1: bus auto-suspend, wakeup 1 [ 15.800058] usb usb1: suspend_rh [ 15.800816] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 15.801939] usb usb5: usb auto-resume [ 15.801950] usb usb5: wakeup_rh [ 15.824171] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 15.824299] hub 5-0:1.0: usb_probe_interface [ 15.824306] hub 5-0:1.0: usb_probe_interface - got id [ 15.824318] hub 5-0:1.0: USB hub found [ 15.827493] hub 5-0:1.0: 2 ports detected [ 15.831766] hub 5-0:1.0: standalone hub [ 15.831776] hub 5-0:1.0: no power switching (usb 1.0) [ 15.831781] hub 5-0:1.0: individual port over-current protection [ 15.831792] hub 5-0:1.0: power on to power good time: 2ms [ 15.831882] hub 5-0:1.0: local power source is good [ 15.839125] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 15.839455] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 15.839471] usb usb6: usb auto-resume [ 15.839481] usb usb6: wakeup_rh [ 15.856817] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled [ 15.856830] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 15.860203] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 15.862062] hub 6-0:1.0: usb_probe_interface [ 15.862074] hub 6-0:1.0: usb_probe_interface - got id [ 15.862090] hub 6-0:1.0: USB hub found [ 15.867325] hub 6-0:1.0: 2 ports detected [ 15.871108] hub 6-0:1.0: standalone hub [ 15.871119] hub 6-0:1.0: no power switching (usb 1.0) [ 15.871124] hub 6-0:1.0: individual port over-current protection [ 15.871135] hub 6-0:1.0: power on to power good time: 2ms [ 15.871506] hub 6-0:1.0: local power source is good [ 15.877188] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 15.912464] usb 7-3: new high-speed USB device number 2 using ehci-pci [ 16.020318] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled [ 16.020331] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 16.140367] usb 7-3: skipped 1 descriptor after configuration [ 16.140379] usb 7-3: skipped 6 descriptors after interface [ 16.140389] usb 7-3: skipped 1 descriptor after endpoint [ 16.140395] usb 7-3: skipped 8 descriptors after interface [ 16.141107] usb 7-3: default language 0x0409 [ 16.144756] irq 16: nobody cared (try booting with the "irqpoll" option) [ 16.147913] CPU: 0 PID: 282 Comm: systemd-journal Tainted: G W 3.13.0-rc8AS+ #2 [ 16.148039] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 16.148039] 00000000 00000000 f494df04 c07e66d6 f506dc00 f494df18 c04675c7 f506dc00 [ 16.148039] 00000000 00000010 f494df34 c0467936 52559448 fffeeacc f506dc00 00000010 [ 16.148039] 00000000 f494df54 c0466052 00000000 00000000 00000000 f506dc00 f506dc54 [ 16.148039] Call Trace: [ 16.148039] [] dump_stack+0x48/0x69 [ 16.148039] [] __report_bad_irq+0x14/0x9e [ 16.148039] [] note_interrupt+0x137/0x1b5 [ 16.148039] [] handle_irq_event_percpu+0xc5/0x107 [ 16.148039] [] handle_irq_event+0x2c/0x44 [ 16.148039] [] handle_fasteoi_irq+0x6a/0x97 [ 16.148039] [] handle_irq+0x9a/0xa9 [ 16.148039] [] do_IRQ+0x35/0x80 [ 16.148039] [] common_interrupt+0x38/0x3d [ 16.148039] handlers: [ 16.148039] [] usb_hcd_irq [usbcore] [ 16.148039] Disabling IRQ #16 [ 16.205482] usb 7-3: udev 2, busnum 7, minor = 769 [ 16.205491] usb 7-3: New USB device found, idVendor=04f2, idProduct=b036 [ 16.208712] usb 7-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 16.211902] usb 7-3: Product: USB2.0 0.3M UVC WebCam [ 16.217224] usb 7-3: Manufacturer: Chicony Electronics Co., Ltd. [ 16.220504] usb 7-3: SerialNumber: SN0001 [ 16.225115] usb 7-3: usb_probe_device [ 16.225123] usb 7-3: configuration #1 chosen from 1 choice [ 16.225503] usb 7-3: adding 7-3:1.0 (config #1, interface 0) [ 16.228721] usb 7-3: adding 7-3:1.1 (config #1, interface 1) [ 16.228957] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 16.228977] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 16.228989] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 16.229002] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 16.229013] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 16.229025] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 16.229056] hub 3-0:1.0: hub_suspend [ 16.229101] usb usb3: bus auto-suspend, wakeup 1 [ 16.229109] usb usb3: suspend_rh [ 16.229148] hub 2-0:1.0: hub_suspend [ 16.229171] hub 8-0:1.0: hub_suspend [ 16.229227] usb usb8: bus auto-suspend, wakeup 1 [ 16.229233] ehci-pci 0000:00:1d.7: suspend root hub [ 16.229587] usb usb2: bus auto-suspend, wakeup 1 [ 16.229594] usb usb2: suspend_rh [ 16.229632] hub 4-0:1.0: hub_suspend [ 16.229669] usb usb4: bus auto-suspend, wakeup 1 [ 16.229675] usb usb4: suspend_rh [ 16.229711] hub 5-0:1.0: hub_suspend [ 16.229745] usb usb5: bus auto-suspend, wakeup 1 [ 16.229751] usb usb5: suspend_rh [ 16.229788] hub 6-0:1.0: hub_suspend [ 16.229816] usb usb6: bus auto-suspend, wakeup 1 [ 16.229822] usb usb6: suspend_rh [ 17.711386] SELinux: initialized (dev sda5, type vfat), uses genfs_contexts [ 17.822312] Adding 8389624k swap on /dev/sda7. Priority:-1 extents:1 across:8389624k [ 18.024163] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 18.027887] SELinux: initialized (dev sda8, type ext4), uses xattr [ 18.151400] systemd-journald[282]: Received request to flush runtime journal from PID 1 [ 26.044840] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X [ 26.106112] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 26.119174] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 26.147690] uhci_hcd 0000:00:1a.0: uhci_pci_suspend [ 26.148945] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0 [ 26.149461] uhci_hcd 0000:00:1a.1: uhci_pci_suspend [ 26.149819] uhci_hcd 0000:00:1a.1: hcd_pci_runtime_suspend: 0 [ 26.150146] uhci_hcd 0000:00:1a.2: uhci_pci_suspend [ 26.150500] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0 [ 26.151003] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 26.151357] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0 [ 26.159322] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 26.159712] uhci_hcd 0000:00:1d.1: hcd_pci_runtime_suspend: 0 [ 26.160456] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 26.160817] uhci_hcd 0000:00:1d.2: hcd_pci_runtime_suspend: 0 [ 26.161509] ehci-pci 0000:00:1d.7: hcd_pci_runtime_suspend: 0 [ 26.170915] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 26.181260] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 26.497283] [drm:intel_crtc_cursor_set], cursor off [ 26.497295] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 26.497308] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 26.497315] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 26.497322] [drm:intel_crtc_cursor_set], cursor off [ 26.497328] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 26.497335] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 26.497340] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 28.080977] wlan0: authenticate with 00:13:46:48:f3:2a [ 28.098806] wlan0: send auth to 00:13:46:48:f3:2a (try 1/3) [ 28.115212] wlan0: authenticated [ 28.120714] iwlwifi 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 28.125133] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 28.129623] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 28.129631] wlan0: waiting for beacon from 00:13:46:48:f3:2a [ 28.164446] wlan0: associate with 00:13:46:48:f3:2a (try 1/3) [ 28.172261] wlan0: RX AssocResp from 00:13:46:48:f3:2a (capab=0x431 status=0 aid=7) [ 28.181997] wlan0: associated [ 54.210942] type=1006 audit(1390876941.289:4): pid=483 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1