| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 30 Jan 2014 09:49:26 +0530
From: Vivek Gautam <gautamvivek1987@...il.com>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Vivek Gautam <gautam.vivek@...sung.com>,
Linux USB Mailing List <linux-usb@...r.kernel.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-doc@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Felipe Balbi <balbi@...com>, Tomasz Figa <t.figa@...sung.com>,
Kamil Debski <k.debski@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Julius Werner <jwerner@...omium.org>,
Jingoo Han <jg1.han@...sung.com>
Subject: Re: [PATCH v3] phy: Add new Exynos5 USB 3.0 PHY driver
Hi Kishon,
On Mon, Jan 27, 2014 at 2:27 PM, Kishon Vijay Abraham I <kishon@...com> wrote:
> Hi,
Thanks for review. Please find my answers inline below.
>
> On Monday 20 January 2014 07:12 PM, Vivek Gautam wrote:
>> Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs.
>> The new driver uses the generic PHY framework and will interact
>> with DWC3 controller present on Exynos5 series of SoCs.
>> Thereby, removing old phy-samsung-usb3 driver and related code
>> used untill now which was based on usb/phy framework.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
>> ---
>>
>> Changes from v2:
>> 1) Added support for multiple PHYs (UTMI+ and PIPE3) and
>> related changes in the driver structuring.
>> 2) Added a xlate function to get the required phy out of
>> number of PHYs in mutiple PHY scenerio.
>> 3) Changed the names of few structures and variables to
>> have a clearer meaning.
>> 4) Added 'usb3phy_config' structure to take care of mutiple
>> phys for a SoC having 'exynos5_usb3phy_drv_data' driver data.
>> 5) Not deleting support for old driver 'phy-samsung-usb3' until
>> required support for generic phy is added to DWC3.
>>
>> .../devicetree/bindings/phy/samsung-phy.txt | 49 ++
>> drivers/phy/Kconfig | 8 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-exynos5-usb3.c | 621 ++++++++++++++++++++
>> 4 files changed, 679 insertions(+)
>> create mode 100644 drivers/phy/phy-exynos5-usb3.c
[snip]
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 330ef2d..32f9f38 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -51,4 +51,12 @@ config PHY_EXYNOS_DP_VIDEO
>> help
>> Support for Display Port PHY found on Samsung EXYNOS SoCs.
>>
>> +config PHY_EXYNOS5_USB3
>> + tristate "Exynos5 SoC series USB 3.0 PHY driver"
>> + depends on ARCH_EXYNOS5
>> + select GENERIC_PHY
>> + select MFD_SYSCON
>
> add depends on 'HAS_IOMEM'. Someone reported getting
> undefined reference to `devm_ioremap_resource' with it.
Ok will add it.
>> + help
>> + Enable USB 3.0 PHY support for Exynos 5 SoC series
>> +
>> endmenu
[snip]
>> diff --git a/drivers/phy/phy-exynos5-usb3.c b/drivers/phy/phy-exynos5-usb3.c
>> new file mode 100644
>> index 0000000..24efed0
>> --- /dev/null
>> +++ b/drivers/phy/phy-exynos5-usb3.c
>> @@ -0,0 +1,621 @@
>> +/*
>> + * Samsung EXYNOS5 SoC series USB 3.0 PHY driver
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Author: Vivek Gautam <gautam.vivek@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +
>> +/* Exynos USB PHY registers */
>> +#define EXYNOS5_FSEL_9MHZ6 0x0
>> +#define EXYNOS5_FSEL_10MHZ 0x1
>> +#define EXYNOS5_FSEL_12MHZ 0x2
>> +#define EXYNOS5_FSEL_19MHZ2 0x3
>> +#define EXYNOS5_FSEL_20MHZ 0x4
>> +#define EXYNOS5_FSEL_24MHZ 0x5
>> +#define EXYNOS5_FSEL_50MHZ 0x7
>> +
>> +/* EXYNOS5: USB 3.0 DRD PHY registers */
>> +#define EXYNOS5_DRD_LINKSYSTEM (0x04)
>> +
>> +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
>> +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
>> +#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
>> +
>> +#define EXYNOS5_DRD_PHYUTMI (0x08)
>> +
>> +#define PHYUTMI_OTGDISABLE (0x1 << 6)
>> +#define PHYUTMI_FORCESUSPEND (0x1 << 1)
>> +#define PHYUTMI_FORCESLEEP (0x1 << 0)
>
> use BIT macro here and below?
Ok.
>> +
>> +#define EXYNOS5_DRD_PHYPIPE (0x0c)
>> +
>> +#define EXYNOS5_DRD_PHYCLKRST (0x10)
>> +
>> +#define PHYCLKRST_EN_UTMISUSPEND (0x1 << 31)
>> +
>> +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
>> +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
>> +
>> +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
>> +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
>> +
>> +#define PHYCLKRST_SSC_EN (0x1 << 20)
>> +#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
>> +#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
>> +
>> +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
>> +
>> +#define PHYCLKRST_FSEL_MASK (0x3f << 5)
>> +#define PHYCLKRST_FSEL(_x) ((_x) << 5)
>> +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
>> +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
>> +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
>> +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
>> +
>> +#define PHYCLKRST_RETENABLEN (0x1 << 4)
>> +
>> +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
>> +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
>> +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
>> +
>> +#define PHYCLKRST_PORTRESET (0x1 << 1)
>> +#define PHYCLKRST_COMMONONN (0x1 << 0)
>> +
>> +#define EXYNOS5_DRD_PHYREG0 (0x14)
>> +#define EXYNOS5_DRD_PHYREG1 (0x18)
>> +
>> +#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
>> +
>> +#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
>> +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
>> +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
>> +
>> +#define EXYNOS5_DRD_PHYPARAM1 (0x20)
>> +
>> +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
>> +#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
>> +
>> +#define EXYNOS5_DRD_PHYTERM (0x24)
>> +
>> +#define EXYNOS5_DRD_PHYTEST (0x28)
>> +
>> +#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
>> +#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
>> +
>> +#define EXYNOS5_DRD_PHYADP (0x2c)
>> +
>> +#define EXYNOS5_DRD_PHYBATCHG (0x30)
>> +
>> +#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
>> +
>> +#define EXYNOS5_DRD_PHYRESUME (0x34)
>> +#define EXYNOS5_DRD_LINKPORT (0x44)
>> +
>> +/* Power isolation defined in power management unit */
>> +#define EXYNOS5_USB3DRD_PHY_PMU_REG_OFFSET (0x704)
>> +#define EXYNOS5_USB3DRD_PMU_ISOL (1 << 0)
>> +
>> +#define KHZ 1000
>> +#define MHZ (KHZ * KHZ)
>> +
>> +enum exynos5_usb3phy_id {
>> + EXYNOS5_USB3PHY_UTMI,
>> + EXYNOS5_USB3PHY_PIPE3,
>> + EXYNOS5_USB3PHYS_NUM,
>> +};
>> +
>> +struct usb3phy_config {
>> + u32 id;
>> + u32 reg_pmu_offset;
>> + void (*phy_isol)(struct phy *phy, u32 on);
>> +};
>> +
>> +struct exynos5_usb3phy_drv_data {
>> + bool has_usb30_sclk;
>> + bool has_multi_controller;
>> + const struct usb3phy_config *phy_cfg;
>> +};
>> +
>> +/**
>> + * struct exynos5_usb3phy_driver - driver data for USB 3.0 PHY
>
> Is this really a driver data? I think it should be just exynos5_usb3phy.
Yes, not a driver data, rather just 'exynos_usb3phy' structure. will
modify the name
>> + * @dev: pointer to device instance of this platform device
>> + * @reg_phy: usb phy controller register memory base
>> + * @clk: phy clock for register access
>> + * @usb30_sclk: additional special clock for phy operations
>> + * @drv_data: pointer to SoC level driver data structure
>> + * @phys[]: array for 'EXYNOS5_USB3PHYS_NUM' number of PHY
>> + * instances each with its 'phy' and 'phy_cfg'.
>> + * @extrefclk: frequency select settings when using 'separate
>> + * reference clocks' for SS and HS operations
>> + * @rate: rate of reference clock to PHY block
>> + * @channel: number of PHY channels present in SoC
>> + */
>> +struct exynos5_usb3phy_driver {
>> + struct device *dev;
>> + void __iomem *reg_phy;
>> + struct clk *clk;
>> + struct clk *usb30_sclk;
>> + const struct exynos5_usb3phy_drv_data *drv_data;
>> + struct phy_usb_instance {
>> + struct phy *phy;
>> + u32 index;
>> + struct regmap *reg_isol;
>> + const struct usb3phy_config *phy_cfg;
>> + } phys[EXYNOS5_USB3PHYS_NUM];
>> + u32 extrefclk;
>> + unsigned long rate;
>> + u32 channel;
>> +};
>> +
>> +#define to_usb3phy_driver(inst) \
>> + container_of((inst), struct exynos5_usb3phy_driver, \
>> + phys[(inst)->index]);
>> +
>> +/*
>> + * exynos5_rate_to_clk() converts the supplied clock rate to the value that
>> + * can be written to the phy register.
>> + */
>> +static u32 exynos5_rate_to_clk(unsigned long rate)
>> +{
>> + unsigned int clksel;
>> +
>> + /* EXYNOS5_FSEL_MASK */
>> +
>> + switch (rate) {
>> + case 9600 * KHZ:
>> + clksel = EXYNOS5_FSEL_9MHZ6;
>> + break;
>> + case 10 * MHZ:
>> + clksel = EXYNOS5_FSEL_10MHZ;
>> + break;
>> + case 12 * MHZ:
>> + clksel = EXYNOS5_FSEL_12MHZ;
>> + break;
>> + case 19200 * KHZ:
>> + clksel = EXYNOS5_FSEL_19MHZ2;
>> + break;
>> + case 20 * MHZ:
>> + clksel = EXYNOS5_FSEL_20MHZ;
>> + break;
>> + case 24 * MHZ:
>> + clksel = EXYNOS5_FSEL_24MHZ;
>> + break;
>> + case 50 * MHZ:
>> + clksel = EXYNOS5_FSEL_50MHZ;
>> + break;
>> + default:
>> + clksel = -EINVAL;
>> + }
>> +
>> + return clksel;
>> +}
>> +
>> +static void exynos5_usb3phy_isol(struct phy *phy, unsigned int on)
>> +{
>> + u32 pmu_offset;
>> + struct phy_usb_instance *inst = phy_get_drvdata(phy);
>> + struct exynos5_usb3phy_driver *drv = to_usb3phy_driver(inst);
>> +
>> + pmu_offset = inst->phy_cfg->reg_pmu_offset;
>> + if (!inst->reg_isol)
>> + return;
>> +
>> + switch (drv->channel) {
>> + case 1:
>> + /* Channel 1 is at 0x708 offset */
>> + pmu_offset += sizeof(&pmu_offset);
>> + break;
>> + case 0:
>> + default:
>> + /* Channel 0 is at 0x704 offset */
>> + break;
>> + }
>
> This can be in a simple 'if' stmt no?
What if there are systems with more channels? In that case also we
will have to fall back to a switch-case statement ?
>> +
>> + regmap_update_bits(inst->reg_isol, pmu_offset,
>> + EXYNOS5_USB3DRD_PMU_ISOL, ~on);
>> +}
>> +
>> +/*
>> + * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
>> + */
>> +static u32 exynos5_usb3phy_set_refclk(struct exynos5_usb3phy_driver *drv)
>> +{
>> + u32 reg;
>> +
>> + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
>> + PHYCLKRST_FSEL(drv->extrefclk);
>> +
>> + switch (drv->extrefclk) {
>> + case EXYNOS5_FSEL_50MHZ:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x00));
>> + break;
>> + case EXYNOS5_FSEL_24MHZ:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x88));
>> + break;
>> + case EXYNOS5_FSEL_20MHZ:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x00));
>> + break;
>> + case EXYNOS5_FSEL_19MHZ2:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x88));
>> + break;
>> + default:
>> + dev_dbg(drv->dev, "unsupported ref clk\n");
>> + break;
>> + }
>> +
>> + return reg;
>> +}
>> +
>> +static int exynos5_usb3phy_init(struct phy *phy)
>> +{
>> + int ret;
>> + u32 phyparam0;
>> + u32 phyparam1;
>> + u32 linksystem;
>> + u32 phybatchg;
>> + u32 phytest;
>> + u32 phyclkrst;
>
> instead you can define a single variable 'u32 reg' for register read and writes.
Right.
>> + struct phy_usb_instance *inst = phy_get_drvdata(phy);
>> + struct exynos5_usb3phy_driver *drv = to_usb3phy_driver(inst);
>> +
>> + ret = clk_prepare_enable(drv->clk);
>> + if (ret)
>> + return ret;
>> +
>> + drv->extrefclk = exynos5_rate_to_clk(drv->rate);
>> + if (drv->extrefclk == -EINVAL) {
>> + dev_err(drv->dev, "Clock rate (%ld) not supported\n",
>> + drv->rate);
>> + return -EINVAL;
>> + }
>> +
>> + /* Reset USB 3.0 PHY */
>> + writel(0x0, drv->reg_phy + EXYNOS5_DRD_PHYREG0);
>> +
>> + phyparam0 = readl(drv->reg_phy + EXYNOS5_DRD_PHYPARAM0);
>> + /* Select PHY CLK source */
>> + phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
>> + /* Set Loss-of-Signal Detector sensitivity */
>> + phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
>> + phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
>> + writel(phyparam0, drv->reg_phy + EXYNOS5_DRD_PHYPARAM0);
>> +
>> + writel(0x0, drv->reg_phy + EXYNOS5_DRD_PHYRESUME);
>> +
>> + /*
>> + * Setting the Frame length Adj value[6:1] to default 0x20
>> + * See xHCI 1.0 spec, 5.2.4
>> + */
>> + linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
>> + LINKSYSTEM_FLADJ(0x20);
>> + writel(linksystem, drv->reg_phy + EXYNOS5_DRD_LINKSYSTEM);
>> +
>> + phyparam1 = readl(drv->reg_phy + EXYNOS5_DRD_PHYPARAM1);
>> + /* Set Tx De-Emphasis level */
>> + phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
>> + phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
>> + writel(phyparam1, drv->reg_phy + EXYNOS5_DRD_PHYPARAM1);
>> +
>> + phybatchg = readl(drv->reg_phy + EXYNOS5_DRD_PHYBATCHG);
>> + phybatchg |= PHYBATCHG_UTMI_CLKSEL;
>> + writel(phybatchg, drv->reg_phy + EXYNOS5_DRD_PHYBATCHG);
>> +
>> + /* PHYTEST POWERDOWN Control */
>> + phytest = readl(drv->reg_phy + EXYNOS5_DRD_PHYTEST);
>> + phytest &= ~(PHYTEST_POWERDOWN_SSP |
>> + PHYTEST_POWERDOWN_HSP);
>> + writel(phytest, drv->reg_phy + EXYNOS5_DRD_PHYTEST);
>> +
>> + /* UTMI Power Control */
>> + writel(PHYUTMI_OTGDISABLE, drv->reg_phy + EXYNOS5_DRD_PHYUTMI);
>
> All these UTMI configuration should be done in usb2 init.
Ok, will move this to separate function.
>> +
>> + phyclkrst = exynos5_usb3phy_set_refclk(drv);
>> +
>> + phyclkrst |= PHYCLKRST_PORTRESET |
>> + /* Digital power supply in normal operating mode */
>> + PHYCLKRST_RETENABLEN |
>> + /* Enable ref clock for SS function */
>> + PHYCLKRST_REF_SSP_EN |
>> + /* Enable spread spectrum */
>> + PHYCLKRST_SSC_EN |
>> + /* Power down HS Bias and PLL blocks in suspend mode */
>> + PHYCLKRST_COMMONONN;
>> +
>> + writel(phyclkrst, drv->reg_phy + EXYNOS5_DRD_PHYCLKRST);
>> +
>> + udelay(10);
>> +
>> + phyclkrst &= ~PHYCLKRST_PORTRESET;
>> + writel(phyclkrst, drv->reg_phy + EXYNOS5_DRD_PHYCLKRST);
>> +
>> + clk_disable_unprepare(drv->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static int exynos5_usb3phy_exit(struct phy *phy)
>> +{
>> + int ret;
>> + u32 phyutmi;
>> + u32 phyclkrst;
>> + u32 phytest;
>
> same here..
right, will do it.
>> + struct phy_usb_instance *inst = phy_get_drvdata(phy);
>> + struct exynos5_usb3phy_driver *drv = to_usb3phy_driver(inst);
>> +
>> + ret = clk_prepare_enable(drv->clk);
>> + if (ret)
>> + return ret;
>> +
>> + phyutmi = PHYUTMI_OTGDISABLE |
>> + PHYUTMI_FORCESUSPEND |
>> + PHYUTMI_FORCESLEEP;
>> + writel(phyutmi, drv->reg_phy + EXYNOS5_DRD_PHYUTMI);
>
> here too.. UTMI configuration should be part of USB2.
ok.
>> +
[snip]
>> +
>> +static struct phy_ops exynos5_usb3phy_ops = {
>> + .init = exynos5_usb3phy_init,
>> + .exit = exynos5_usb3phy_exit,
>> + .power_on = exynos5_usb3phy_power_on,
>> + .power_off = exynos5_usb3phy_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +const struct usb3phy_config exynos5_usb3phy_cfg[] = {
>> + {
>> + .id = EXYNOS5_USB3PHY_UTMI,
>
> This should be USB2 no?
Actually the thought was to have similar naming for enums.
EXYNOS5_USB3PHY_UTMI
EXYNOS5_USB3PHY_PIPE3
Since the entire driver was going that way.
But will change these to a more common name
EXYNOS5_DRDPHY_UTMI
EXYNOS5_DRDPHY_PIPE3,
in the same fashion the register names are defined.
Will that be fine ?
>> + .reg_pmu_offset = EXYNOS5_USB3DRD_PHY_PMU_REG_OFFSET,
>> + .phy_isol = exynos5_usb3phy_isol,
>> + },
>> + {
>> + .id = EXYNOS5_USB3PHY_PIPE3,
>> + .reg_pmu_offset = EXYNOS5_USB3DRD_PHY_PMU_REG_OFFSET,
>> + .phy_isol = exynos5_usb3phy_isol,
>> + },
>> + {},
>> +};
>> +
>> +const struct exynos5_usb3phy_drv_data exynos5420_usb3phy = {
>> + .has_usb30_sclk = true,
>> + .has_multi_controller = true,
>> + .phy_cfg = exynos5_usb3phy_cfg,
>> +};
>> +
>> +const struct exynos5_usb3phy_drv_data exynos5250_usb3phy = {
>> + .has_usb30_sclk = false,
>> + .has_multi_controller = false,
>> + .phy_cfg = exynos5_usb3phy_cfg,
>> +};
>> +
>> +static const struct of_device_id exynos5_usb3phy_of_match[] = {
>> + {
>> + .compatible = "samsung,exynos5250-usb3phy",
>> + .data = &exynos5250_usb3phy
>> + }, {
>> + .compatible = "samsung,exynos5420-usb3phy",
>> + .data = &exynos5420_usb3phy
>> + },
>> + { },
>> +};
>> +
>> +static int exynos5_usb3phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *node = dev->of_node;
>> + struct exynos5_usb3phy_driver *drv;
>> + struct phy_provider *phy_provider;
>> + struct resource *res;
>> + struct clk *clk;
>> + const struct of_device_id *match;
>> + const struct exynos5_usb3phy_drv_data *drv_data;
>> + struct regmap *reg_isol;
>> + int i;
>> +
>> + /*
>> + * Exynos systems are completely DT enabled,
>> + * so lets not have any platform data support for this driver.
>> + */
>
> Then you should add depend on OF for this driver.
Right. depends on CONFIG_OF. Will add one.
>> + if (!node) {
>> + dev_err(dev, "no device node found\n");
>> + return -ENODEV;
>> + }
>> +
>> + match = of_match_node(exynos5_usb3phy_of_match, pdev->dev.of_node);
>> + if (!match) {
>> + dev_err(dev, "of_match_node() failed\n");
>> + return -EINVAL;
>> + }
>> + drv_data = match->data;
>> +
>> + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
>> + if (!drv) {
>> + dev_err(dev, "Failed to allocate memory\n");
>
> dev_err is not needed here.
Right, will remove it.
>> + return -ENOMEM;
>> + }
>> +
[snip]
>> + dev_dbg(dev, "Creating usb3drd phy\n");
> dev_vdbg?
Sure.
>
> Cheers
> Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists