[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fefb071b5cc2a76f18036a466427f237316a19f4.1391871170.git.pratyush.anand@st.com>
Date: Mon, 10 Feb 2014 14:21:57 +0530
From: Mohit Kumar <mohit.kumar@...com>
To: <arnd@...db.de>
Cc: Pratyush Anand <pratyush.anand@...com>,
Kishon Vijay Abraham I <kishon@...com>,
<spear-devel@...t.st.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH V5 6/8] phy: st-miphy-40lp: Add SPEAr1310 and SPEAr1340 PCIe phy support
From: Pratyush Anand <pratyush.anand@...com>
SPEAr1310 and SPEAr1340 uses miphy40lp phy for PCIe. This driver adds
support for the same.
Signed-off-by: Pratyush Anand <pratyush.anand@...com>
Tested-by: Mohit Kumar <mohit.kumar@...com>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Kishon Vijay Abraham I <kishon@...com>
Cc: spear-devel@...t.st.com
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
drivers/phy/phy-miphy40lp.c | 165 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 165 insertions(+)
diff --git a/drivers/phy/phy-miphy40lp.c b/drivers/phy/phy-miphy40lp.c
index 0ee1972..fe8535a 100644
--- a/drivers/phy/phy-miphy40lp.c
+++ b/drivers/phy/phy-miphy40lp.c
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*
* 04/02/2014: Adding support of SATA mode for SPEAr1340.
+ * 04/02/2014: Adding support of PCIe mode for SPEAr1340 and SPEAr1310
*/
#include <linux/bitops.h>
@@ -74,6 +75,80 @@
#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+/* SPEAr1310 Registers */
+#define SPEAR1310_PCIE_SATA_CFG 0x3A4
+ #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
+ #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
+ #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
+ #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
+ #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
+ #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
+ #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
+ #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
+ #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
+ #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
+ #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
+ #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
+ #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
+ #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
+ #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
+ #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
+ #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
+ #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
+ #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
+ #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
+ #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
+ #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
+ #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
+ #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
+ #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
+ #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
+ #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
+ #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
+ #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
+ #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
+
+ #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
+ #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
+ BIT((x + 29)))
+ #define SPEAR1310_PCIE_CFG_VAL(x) \
+ (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
+ SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
+ SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
+ SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
+ SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
+ #define SPEAR1310_SATA_CFG_VAL(x) \
+ (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
+ SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
+ SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
+ SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
+ SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
+
+#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
+ #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
+ #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
+ #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
+ #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
+ #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
+ #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
+ SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
+ SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
+ SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
+ #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
+ SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
+ SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
+
+#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
enum phy_mode {
SATA,
@@ -146,12 +221,35 @@ static int miphy40lp_spear1340_sata_exit(struct miphy40lp_priv *priv)
return 0;
}
+static int miphy40lp_spear1340_pcie_init(struct miphy40lp_priv *priv)
+{
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK,
+ SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, SPEAR1340_PCIE_CFG_VAL);
+
+ return 0;
+}
+
+static int miphy40lp_spear1340_pcie_exit(struct miphy40lp_priv *priv)
+{
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
+ regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, 0);
+
+ return 0;
+}
+
static int miphy40lp_spear1340_init(struct miphy40lp_priv *priv)
{
int ret = 0;
if (priv->mode == SATA)
ret = miphy40lp_spear1340_sata_init(priv);
+ else if (priv->mode == PCIE)
+ ret = miphy40lp_spear1340_pcie_init(priv);
return ret;
}
@@ -162,6 +260,8 @@ static int miphy40lp_spear1340_exit(struct miphy40lp_priv *priv)
if (priv->mode == SATA)
ret = miphy40lp_spear1340_sata_exit(priv);
+ else if (priv->mode == PCIE)
+ ret = miphy40lp_spear1340_pcie_exit(priv);
return ret;
}
@@ -193,6 +293,70 @@ static struct miphy40lp_plat_ops spear1340_phy_ops = {
.plat_resume = miphy40lp_spear1340_resume,
};
+static int miphy40lp_spear1310_pcie_init(struct miphy40lp_priv *priv)
+{
+ u32 val;
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
+
+ switch (priv->id) {
+ case 0:
+ val = SPEAR1310_PCIE_CFG_VAL(0);
+ break;
+ case 1:
+ val = SPEAR1310_PCIE_CFG_VAL(1);
+ break;
+ case 2:
+ val = SPEAR1310_PCIE_CFG_VAL(2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
+ SPEAR1310_PCIE_CFG_MASK(priv->id), val);
+
+ return 0;
+}
+
+static int miphy40lp_spear1310_pcie_exit(struct miphy40lp_priv *priv)
+{
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
+ SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
+
+ regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
+ SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
+
+ return 0;
+}
+
+static int miphy40lp_spear1310_init(struct miphy40lp_priv *priv)
+{
+ int ret = 0;
+
+ if (priv->mode == PCIE)
+ ret = miphy40lp_spear1310_pcie_init(priv);
+
+ return ret;
+}
+
+static int miphy40lp_spear1310_exit(struct miphy40lp_priv *priv)
+{
+ int ret = 0;
+
+ if (priv->mode == PCIE)
+ ret = miphy40lp_spear1310_pcie_exit(priv);
+
+ return ret;
+}
+
+static struct miphy40lp_plat_ops spear1310_phy_ops = {
+ .plat_init = miphy40lp_spear1310_init,
+ .plat_exit = miphy40lp_spear1310_exit,
+};
+
static int miphy40lp_init(struct phy *phy)
{
struct miphy40lp_priv *priv = phy_get_drvdata(phy);
@@ -244,6 +408,7 @@ static int miphy40lp_power_on(struct phy *phy)
static const struct of_device_id miphy40lp_of_match[] = {
{ .compatible = "st,miphy40lp-phy", .data = NULL },
{ .compatible = "st,spear1340-miphy", .data = &spear1340_phy_ops },
+ { .compatible = "st,spear1310-miphy", .data = &spear1310_phy_ops },
{ },
};
MODULE_DEVICE_TABLE(of, miphy40lp_of_match);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists