early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc1-00027-g68a25f0 (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 8 15:01:51 CST 2014 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02663000, 0x02663fff] PGTABLE [ 0.000000] BRK [0x02664000, 0x02664fff] PGTABLE [ 0.000000] BRK [0x02665000, 0x02665fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M [ 0.000000] BRK [0x02666000, 0x02666fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x70b06000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fff7000-0x11fffbfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, boot clock [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 1048476 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s81088 r8192 d21312 u524288 [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d040 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032071 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3787676K/4193904K available (10464K kernel code, 1246K rwdata, 4168K rodata, 1436K init, 1752K bss, 406228K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc1-00027-g68a25f0 (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 8 15:01:51 CST 2014 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02663000, 0x02663fff] PGTABLE [ 0.000000] BRK [0x02664000, 0x02664fff] PGTABLE [ 0.000000] BRK [0x02665000, 0x02665fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M [ 0.000000] BRK [0x02666000, 0x02666fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x70b06000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 00000000dfffff40 000040 [ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fff7000-0x11fffbfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, boot clock [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 1048476 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s81088 r8192 d21312 u524288 [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d040 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032071 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3787676K/4193904K available (10464K kernel code, 1246K rwdata, 4168K rodata, 1436K init, 1752K bss, 406228K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.600 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.20 BogoMIPS (lpj=10774400) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010861] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013410] Mount-cache hash table entries: 256 [ 0.014536] Initializing cgroup subsys memory [ 0.015340] Initializing cgroup subsys devices [ 0.016005] Initializing cgroup subsys freezer [ 0.016803] Initializing cgroup subsys blkio [ 0.017609] Initializing cgroup subsys perf_event [ 0.018459] Initializing cgroup subsys hugetlb [ 0.019319] mce: CPU supports 10 MCE banks [ 0.020041] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020041] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.020041] tlb_flushall_shift: 6 [ 0.022535] Freeing SMP alternatives memory: 44K (ffffffff824a0000 - ffffffff824ab000) [ 0.028713] ftrace: allocating 39928 entries in 156 pages [ 0.040168] Getting VERSION: 50014 [ 0.040913] Getting VERSION: 50014 [ 0.041614] Getting ID: 0 [ 0.042239] Getting ID: ff000000 [ 0.044010] Getting LVT0: 8700 [ 0.044701] Getting LVT1: 8400 [ 0.045406] enabled ExtINT on CPU#0 [ 0.046762] ENABLING IO-APIC IRQs [ 0.047475] init IO_APIC IRQs [ 0.048004] apic 0 pin 0 not connected [ 0.048742] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.050251] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.052015] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.053493] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.054965] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.056014] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.057475] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.058904] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.060014] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.061472] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.062916] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.064014] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.065484] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.068014] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.069467] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.070925] apic 0 pin 16 not connected [ 0.072002] apic 0 pin 17 not connected [ 0.072741] apic 0 pin 18 not connected [ 0.073480] apic 0 pin 19 not connected [ 0.074238] apic 0 pin 20 not connected [ 0.074971] apic 0 pin 21 not connected [ 0.075702] apic 0 pin 22 not connected [ 0.076002] apic 0 pin 23 not connected [ 0.076887] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078008] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.080003] Using local APIC timer interrupts. [ 0.080003] calibrating APIC timer ... [ 0.084000] ... lapic delta = 6249883 [ 0.084000] ... PM-Timer delta = 357987 [ 0.084000] ... PM-Timer result ok [ 0.084000] ..... delta 6249883 [ 0.084000] ..... mult: 268430430 [ 0.084000] ..... calibration result: 3999925 [ 0.084000] ..... CPU clock speed is 2693.2624 MHz. [ 0.084000] ..... host bus clock speed is 999.3925 MHz. [ 0.084056] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.087677] x86: Booting SMP configuration: [ 0.088003] .... node #0, CPUs: #1 [ 0.008000] kvm-clock: cpu 1, msr 1:1ffef041, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.104022] KVM setup async PF for cpu 1 [ 0.105259] #2 [ 0.105259] kvm-stealtime: cpu 1, msr 11fc8d040 [ 0.008000] kvm-clock: cpu 2, msr 1:1ffef081, secondary cpu clock [ 0.008000] masked ExtINT on CPU#2 [ 0.120020] KVM setup async PF for cpu 2 [ 0.121005] #3 [ 0.121005] kvm-stealtime: cpu 2, msr 11fd0d040 [ 0.008000] kvm-clock: cpu 3, msr 1:1ffef0c1, secondary cpu clock [ 0.008000] masked ExtINT on CPU#3 [ 0.136043] x86: Booted up 1 node, 4 CPUs [ 0.136023] KVM setup async PF for cpu 3 [ 0.136023] kvm-stealtime: cpu 3, msr 11fd8d040 [ 0.138450] smpboot: Total of 4 processors activated (21548.80 BogoMIPS) [ 0.140184] devtmpfs: initialized [ 0.145004] xor: measuring software checksum speed [ 0.184011] prefetch64-sse: 188.000 MB/sec [ 0.224003] generic_sse: 184.000 MB/sec [ 0.224896] xor: using function: prefetch64-sse (188.000 MB/sec) [ 0.225882] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.227272] NET: Registered protocol family 16 [ 0.228564] cpuidle: using governor ladder [ 0.228861] cpuidle: using governor menu [ 0.232345] ACPI: bus type PCI registered [ 0.233159] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.234218] PCI: Using configuration type 1 for base access [ 0.260127] bio: create slab at 0 [ 0.328004] raid6: sse2x1 8368 MB/s [ 0.396010] raid6: sse2x2 10609 MB/s [ 0.464004] raid6: sse2x4 12381 MB/s [ 0.464852] raid6: using algorithm sse2x4 (12381 MB/s) [ 0.465736] raid6: using intx1 recovery algorithm [ 0.466662] ACPI: Added _OSI(Module Device) [ 0.467473] ACPI: Added _OSI(Processor Device) [ 0.468012] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.468913] ACPI: Added _OSI(Processor Aggregator Device) [ 0.471433] ACPI: Interpreter enabled [ 0.472007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.473778] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.476023] ACPI: (supports S0 S3 S4 S5) [ 0.476840] ACPI: Using IOAPIC for interrupt routing [ 0.477752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.477872] ACPI: No dock devices found. [ 0.484189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.488008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.489149] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.490345] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.492289] acpiphp: Slot [3] registered [ 0.492876] acpiphp: Slot [4] registered [ 0.492876] acpiphp: Slot [5] registered [ 0.492876] acpiphp: Slot [6] registered [ 0.496051] acpiphp: Slot [7] registered [ 0.496871] acpiphp: Slot [8] registered [ 0.496872] acpiphp: Slot [9] registered [ 0.496872] acpiphp: Slot [10] registered [ 0.500062] acpiphp: Slot [11] registered [ 0.500871] acpiphp: Slot [12] registered [ 0.500880] acpiphp: Slot [13] registered [ 0.500888] acpiphp: Slot [14] registered [ 0.500888] acpiphp: Slot [15] registered [ 0.504048] acpiphp: Slot [16] registered [ 0.504877] acpiphp: Slot [17] registered [ 0.504886] acpiphp: Slot [18] registered [ 0.504886] acpiphp: Slot [19] registered [ 0.508058] acpiphp: Slot [20] registered [ 0.508880] acpiphp: Slot [21] registered [ 0.508880] acpiphp: Slot [22] registered [ 0.508880] acpiphp: Slot [23] registered [ 0.508880] acpiphp: Slot [24] registered [ 0.512053] acpiphp: Slot [25] registered [ 0.512869] acpiphp: Slot [26] registered [ 0.512877] acpiphp: Slot [27] registered [ 0.512878] acpiphp: Slot [28] registered [ 0.516058] acpiphp: Slot [29] registered [ 0.516870] acpiphp: Slot [30] registered [ 0.516875] acpiphp: Slot [31] registered [ 0.516875] PCI host bridge to bus 0000:00 [ 0.517658] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.520004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.521053] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.522097] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.524003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 0.525165] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.526506] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.528057] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.531797] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.533597] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.536308] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.537798] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.539108] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.544618] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.548604] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.556043] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.557672] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.557988] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.560969] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.568005] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.572178] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.576572] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.578477] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.584808] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.586003] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.588542] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.594652] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.596537] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.598408] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.604770] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.606000] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.608527] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.614693] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.617053] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.618904] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.624773] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.626027] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.629016] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.635128] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.636564] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.640921] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.641756] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.644041] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.645415] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.646655] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.648224] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.649291] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.649472] vgaarb: loaded [ 0.652015] vgaarb: bridge control possible 0000:00:02.0 [ 0.653098] SCSI subsystem initialized [ 0.653098] libata version 3.00 loaded. [ 0.653098] ACPI: bus type USB registered [ 0.656068] usbcore: registered new interface driver usbfs [ 0.656993] usbcore: registered new interface driver hub [ 0.656993] usbcore: registered new device driver usb [ 0.656993] pps_core: LinuxPPS API ver. 1 registered [ 0.660012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.661675] PTP clock support registered [ 0.661675] EDAC MC: Ver: 3.0.0 [ 0.664206] PCI: Using ACPI for IRQ routing [ 0.664807] PCI: pci_cache_line_size set to 64 bytes [ 0.665832] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.666800] e820: reserve RAM buffer [mem 0xdfffe000-0xdfffffff] [ 0.668609] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.669703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.670817] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.676136] Switched to clocksource kvm-clock [ 0.690892] pnp: PnP ACPI init [ 0.691599] ACPI: bus type PNP registered [ 0.692435] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15) [ 0.694040] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.695073] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15) [ 0.696761] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.697811] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:15) [ 0.699413] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.700506] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:15) [ 0.701952] pnp 00:03: [dma 2] [ 0.702763] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.703799] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:15) [ 0.705452] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.706500] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15) [ 0.708072] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.709298] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.710390] pnp: PnP ACPI: found 7 devices [ 0.711151] ACPI: bus type PNP unregistered [ 0.726994] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.727920] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.728856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.729839] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] [ 0.730903] NET: Registered protocol family 2 [ 0.731915] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.733520] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.734859] TCP: Hash tables configured (established 32768 bind 32768) [ 0.735963] TCP: reno registered [ 0.736753] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.737754] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.738850] NET: Registered protocol family 1 [ 0.739947] RPC: Registered named UNIX socket transport module. [ 0.740988] RPC: Registered udp transport module. [ 0.741802] RPC: Registered tcp transport module. [ 0.742605] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.743581] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.744575] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.745510] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.746470] pci 0000:00:02.0: Boot video device [ 0.747306] PCI: CLS 0 bytes, default 64 [ 0.748179] Trying to unpack rootfs image as initramfs... [ 5.136387] Freeing initrd memory: 250856K (ffff880070b06000 - ffff880080000000) [ 5.137924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.138983] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff] [ 5.141259] kvm: no hardware support [ 5.142636] Scanning for low memory corruption every 60 seconds [ 5.144008] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 5.145755] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 5.147599] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 5.150280] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 5.151347] PCLMULQDQ-NI instructions are not detected. [ 5.152352] AVX or AES-NI instructions are not detected. [ 5.153322] AVX instructions are not detected. [ 5.154180] AVX instructions are not detected. [ 5.155033] AVX instructions are not detected. [ 5.155894] AVX instructions are not detected. [ 5.159427] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 5.181878] bounce pool size: 64 pages [ 5.182706] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.192319] VFS: Disk quotas dquot_6.5.2 [ 5.193286] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.197428] NFS: Registering the id_resolver key type [ 5.198373] Key type id_resolver registered [ 5.199211] Key type id_legacy registered [ 5.200058] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 5.201184] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.202972] ROMFS MTD (C) 2007 Red Hat, Inc. [ 5.204100] fuse init (API version 7.22) [ 5.205383] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.210836] msgmni has been set to 7887 [ 5.218290] NET: Registered protocol family 38 [ 5.219184] Key type asymmetric registered [ 5.220317] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 5.221948] io scheduler noop registered [ 5.222778] io scheduler deadline registered [ 5.223646] io scheduler cfq registered (default) [ 5.225137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.226435] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.227829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 5.229412] ACPI: Power Button [PWRF] [ 5.230659] GHES: HEST is not enabled! [ 5.231953] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 5.233021] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:15) [ 5.236155] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 5.237203] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:15) [ 5.240477] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 5.243386] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 5.251650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.274184] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 5.277643] Non-volatile memory driver v1.3 [ 5.282397] brd: module loaded [ 5.285367] loop: module loaded [ 5.286301] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X [ 5.287282] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X [ 5.288435] blk-mq: CPU -> queue map [ 5.289212] CPU 0 -> Queue 0 [ 5.289921] CPU 1 -> Queue 0 [ 5.290639] CPU 2 -> Queue 0 [ 5.291357] CPU 3 -> Queue 0 [ 5.293111] vda: unknown partition table [ 5.295903] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X [ 5.296935] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X [ 5.298113] blk-mq: CPU -> queue map [ 5.298888] CPU 0 -> Queue 0 [ 5.299610] CPU 1 -> Queue 0 [ 5.300341] CPU 2 -> Queue 0 [ 5.301058] CPU 3 -> Queue 0 [ 5.302831] vdb: unknown partition table [ 5.305520] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X [ 5.306500] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X [ 5.307609] blk-mq: CPU -> queue map [ 5.308391] CPU 0 -> Queue 0 [ 5.309099] CPU 1 -> Queue 0 [ 5.309804] CPU 2 -> Queue 0 [ 5.315680] CPU 3 -> Queue 0 [ 5.317231] vdc: unknown partition table [ 5.319839] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X [ 5.320870] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X [ 5.321985] blk-mq: CPU -> queue map [ 5.322755] CPU 0 -> Queue 0 [ 5.323456] CPU 1 -> Queue 0 [ 5.324174] CPU 2 -> Queue 0 [ 5.324874] CPU 3 -> Queue 0 [ 5.326243] vdd: unknown partition table [ 5.328930] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X [ 5.329929] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X [ 5.331028] blk-mq: CPU -> queue map [ 5.331805] CPU 0 -> Queue 0 [ 5.332558] CPU 1 -> Queue 0 [ 5.333306] CPU 2 -> Queue 0 [ 5.334018] CPU 3 -> Queue 0 [ 5.335678] vde: unknown partition table [ 5.338447] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X [ 5.339461] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X [ 5.340639] blk-mq: CPU -> queue map [ 5.341435] CPU 0 -> Queue 0 [ 5.342169] CPU 1 -> Queue 0 [ 5.342899] CPU 2 -> Queue 0 [ 5.343629] CPU 3 -> Queue 0 [ 5.345312] vdf: unknown partition table [ 5.347787] lkdtm: No crash points registered, enable through debugfs [ 5.349535] Loading iSCSI transport class v2.0-870. [ 5.351493] Adaptec aacraid driver 1.2-0[30200]-ms [ 5.352485] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 5.353855] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 5.355617] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.357321] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.358576] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 5.359844] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.361026] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 5.362535] ata_piix 0000:00:01.1: version 2.13 [ 5.365795] scsi0 : ata_piix [ 5.366761] scsi1 : ata_piix [ 5.367613] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14 [ 5.368744] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15 [ 5.370805] tun: Universal TUN/TAP device driver, 1.6 [ 5.371734] tun: (C) 1999-2004 Max Krasnyansky [ 5.373195] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 5.374463] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 5.375453] Copyright (c) 2007 Atheros Corporation. [ 5.376743] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 5.377965] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 5.377965] http://www.scyld.com/network/drivers.html [ 5.380263] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 5.381522] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 5.382566] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.383615] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 5.384783] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 5.524483] ata2.01: NODEV after polling detection [ 5.525541] ata2.00: ATAPI: QEMU DVD-ROM, 1.6.0, max UDMA/100 [ 5.526799] ata2.00: configured for MWDMA2 [ 5.528547] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.6. PQ: 0 ANSI: 5 [ 5.531099] scsi 1:0:0:0: Attached scsi generic sg0 type 5 [ 5.708368] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 5.709426] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.710677] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 5.711611] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 5.712849] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 5.713886] igb: Copyright (c) 2007-2013 Intel Corporation. [ 5.715017] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k [ 5.716464] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 5.717640] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 5.718710] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 5.719993] sky2: driver version 1.30 [ 5.722293] usbcore: registered new interface driver catc [ 5.723300] usbcore: registered new interface driver kaweth [ 5.724247] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 5.725777] usbcore: registered new interface driver pegasus [ 5.726800] usbcore: registered new interface driver rtl8150 [ 5.727826] usbcore: registered new interface driver asix [ 5.728876] usbcore: registered new interface driver ax88179_178a [ 5.729937] usbcore: registered new interface driver cdc_ether [ 5.730975] usbcore: registered new interface driver r815x [ 5.731975] usbcore: registered new interface driver cdc_eem [ 5.733073] usbcore: registered new interface driver dm9601 [ 5.734088] usbcore: registered new interface driver smsc75xx [ 5.735131] usbcore: registered new interface driver smsc95xx [ 5.736198] usbcore: registered new interface driver gl620a [ 5.737213] usbcore: registered new interface driver net1080 [ 5.738227] usbcore: registered new interface driver plusb [ 5.739224] usbcore: registered new interface driver rndis_host [ 5.740329] usbcore: registered new interface driver cdc_subset [ 5.741379] usbcore: registered new interface driver zaurus [ 5.742388] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.743889] usbcore: registered new interface driver int51x1 [ 5.744923] usbcore: registered new interface driver ipheth [ 5.745935] usbcore: registered new interface driver sierra_net [ 5.746982] usbcore: registered new interface driver cdc_ncm [ 5.747918] Fusion MPT base driver 3.04.20 [ 5.748711] Copyright (c) 1999-2008 LSI Corporation [ 5.749583] Fusion MPT SPI Host driver 3.04.20 [ 5.750509] Fusion MPT FC Host driver 3.04.20 [ 5.751407] Fusion MPT SAS Host driver 3.04.20 [ 5.752330] Fusion MPT misc device (ioctl) driver 3.04.20 [ 5.753347] mptctl: Registered with Fusion MPT base driver [ 5.754270] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.755358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.756391] ehci-pci: EHCI PCI platform driver [ 5.757273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.758264] ohci-pci: OHCI PCI platform driver [ 5.759129] uhci_hcd: USB Universal Host Controller Interface driver [ 5.760307] usbcore: registered new interface driver usb-storage [ 5.761334] usbcore: registered new interface driver ums-alauda [ 5.762347] usbcore: registered new interface driver ums-datafab [ 5.763365] usbcore: registered new interface driver ums-freecom [ 5.764412] usbcore: registered new interface driver ums-isd200 [ 5.765429] usbcore: registered new interface driver ums-jumpshot [ 5.766454] usbcore: registered new interface driver ums-sddr09 [ 5.767468] usbcore: registered new interface driver ums-sddr55 [ 5.768495] usbcore: registered new interface driver ums-usbat [ 5.769509] usbcore: registered new interface driver usbtest [ 5.770576] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.772754] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.773702] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.775269] mousedev: PS/2 mouse device common for all mice [ 5.776925] rtc_cmos 00:00: RTC can wake from S4 [ 5.777938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 5.779897] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.781075] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 5.782343] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 5.783619] i6300esb: initialized (0xffffc9000072a000). heartbeat=30 sec (nowayout=0) [ 5.785176] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.786202] iTCO_vendor_support: vendor-support=0 [ 5.787089] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 5.788578] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 5.790258] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 5.792030] md: linear personality registered for level -1 [ 5.792920] md: raid0 personality registered for level 0 [ 5.793777] md: raid1 personality registered for level 1 [ 5.794631] md: raid10 personality registered for level 10 [ 5.795669] md: raid6 personality registered for level 6 [ 5.796623] md: raid5 personality registered for level 5 [ 5.797587] md: raid4 personality registered for level 4 [ 5.798448] md: multipath personality registered for level -4 [ 5.799348] md: faulty personality registered for level -5 [ 5.801302] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.803124] device-mapper: multipath: version 1.6.0 loaded [ 5.804057] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.805075] device-mapper: cache-policy-mq: version 1.2.0 loaded [ 5.805999] device-mapper: cache cleaner: version 1.0.0 loaded [ 5.807182] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.810201] usbcore: registered new interface driver usbhid [ 5.811090] usbhid: USB HID core driver [ 5.811940] TCP: bic registered [ 5.812666] Initializing XFRM netlink socket [ 5.813775] NET: Registered protocol family 10 [ 5.814752] sit: IPv6 over IPv4 tunneling driver [ 5.815804] NET: Registered protocol family 17 [ 5.816645] 8021q: 802.1Q VLAN Support v1.8 [ 5.818185] sctp: Hash tables configured (established 65536 bind 65536) [ 5.819443] Key type dns_resolver registered [ 5.821111] [ 5.821111] printing PIC contents [ 5.822219] ... PIC IMR: ffff [ 5.822859] ... PIC IRR: 9113 [ 5.823505] ... PIC ISR: 0000 [ 5.824163] ... PIC ELCR: 0c00 [ 5.824856] printing local APIC contents on CPU#0/0: [ 5.825740] ... APIC ID: 00000000 (0) [ 5.826519] ... APIC VERSION: 00050014 [ 5.828845] ... APIC TASKPRI: 00000000 (00) [ 5.828845] ... APIC PROCPRI: 00000000 [ 5.828845] ... APIC LDR: 01000000 [ 5.828845] ... APIC DFR: ffffffff [ 5.828845] ... APIC SPIV: 000001ff [ 5.828845] ... APIC ISR field: [ 5.828845] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.828845] ... APIC TMR field: [ 5.828845] 0000000002000000000000000000000000000000000000000000000000000000 [ 5.828845] ... APIC IRR field: [ 5.828845] 0000000000000000000000000000000000000000000000000000000020000000 [ 5.828845] ... APIC ESR: 00000000 [ 5.828845] ... APIC ICR: 000008fd [ 5.828845] ... APIC ICR2: 02000000 [ 5.828845] ... APIC LVTT: 000000ef [ 5.828845] ... APIC LVTPC: 00010000 [ 5.828845] ... APIC LVT0: 00010700 [ 5.828845] ... APIC LVT1: 00000400 [ 5.828845] ... APIC LVTERR: 000000fe [ 5.828845] ... APIC TMICT: 01405f24 [ 5.828845] ... APIC TMCCT: 011540b3 [ 5.828845] ... APIC TDCR: 00000003 [ 5.828845] [ 5.851187] number of MP IRQ sources: 15. [ 5.851920] number of IO-APIC #0 registers: 24. [ 5.852713] testing the IO APIC....................... [ 5.853568] IO APIC #0...... [ 5.854192] .... register #00: 00000000 [ 5.854900] ....... : physical APIC id: 00 [ 5.855667] ....... : Delivery Type: 0 [ 5.856406] ....... : LTS : 0 [ 5.857133] .... register #01: 00170011 [ 5.857844] ....... : max redirection entries: 17 [ 5.858673] ....... : PRQ implemented: 0 [ 5.859429] ....... : IO APIC version: 11 [ 5.860202] .... register #02: 00000000 [ 5.860916] ....... : arbitration: 00 [ 5.861648] .... IRQ redirection table: [ 5.862370] 1 0 0 0 0 0 0 00 [ 5.863152] 0 0 0 0 0 1 1 31 [ 5.863933] 0 0 0 0 0 1 1 30 [ 5.864735] 0 0 0 0 0 1 1 33 [ 5.865523] 1 0 0 0 0 1 1 34 [ 5.866310] 1 1 0 0 0 1 1 35 [ 5.867099] 0 0 0 0 0 1 1 36 [ 5.867881] 0 0 0 0 0 1 1 37 [ 5.868678] 0 0 0 0 0 1 1 38 [ 5.869468] 0 1 0 0 0 1 1 39 [ 5.870258] 1 1 0 0 0 1 1 3A [ 5.871048] 1 1 0 0 0 1 1 3B [ 5.871829] 0 0 0 0 0 1 1 3C [ 5.872626] 0 0 0 0 0 1 1 3D [ 5.873423] 0 0 0 0 0 1 1 3E [ 5.874209] 0 0 0 0 0 1 1 3F [ 5.874990] 1 0 0 0 0 0 0 00 [ 5.875776] 1 0 0 0 0 0 0 00 [ 5.876576] 1 0 0 0 0 0 0 00 [ 5.877365] 1 0 0 0 0 0 0 00 [ 5.878150] 1 0 0 0 0 0 0 00 [ 5.878932] 1 0 0 0 0 0 0 00 [ 5.879716] 1 0 0 0 0 0 0 00 [ 5.880515] 1 0 0 0 0 0 0 00 [ 5.881295] IRQ to pin mappings: [ 5.881950] IRQ0 -> 0:2 [ 5.882657] IRQ1 -> 0:1 [ 5.883356] IRQ3 -> 0:3 [ 5.884072] IRQ4 -> 0:4 [ 5.884770] IRQ5 -> 0:5 [ 5.885472] IRQ6 -> 0:6 [ 5.886175] IRQ7 -> 0:7 [ 5.886877] IRQ8 -> 0:8 [ 5.887575] IRQ9 -> 0:9 [ 5.888287] IRQ10 -> 0:10 [ 5.889007] IRQ11 -> 0:11 [ 5.889730] IRQ12 -> 0:12 [ 5.890449] IRQ13 -> 0:13 [ 5.891171] IRQ14 -> 0:14 [ 5.891889] IRQ15 -> 0:15 [ 5.892625] .................................... done. [ 5.893827] registered taskstats version 1 [ 5.895116] rtc_cmos 00:00: setting system clock to 2014-02-08 15:07:04 UTC (1391872024) [ 5.896571] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 5.901346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.902265] 8021q: adding VLAN 0 to HW filter on device eth0 [ 6.140119] tsc: Refined TSC clocksource calibration: 2693.410 MHz [ 6.402416] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 7.904542] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 7.908104] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.924091] Sending DHCP requests ., OK [ 7.984102] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 [ 7.985288] IP-Config: Complete: [ 7.985952] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 [ 7.987500] host=vpx-1, domain=, nis-domain=(none) [ 7.988374] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= [ 7.989033] nameserver0=10.0.2.3 [ 7.990163] PM: Hibernation image not present or could not be loaded. [ 7.992520] Freeing unused kernel memory: 1436K (ffffffff82339000 - ffffffff824a0000) [ 7.993922] Write protecting the kernel read-only data: 18432k [ 7.998771] Freeing unused kernel memory: 1812K (ffff880001a3b000 - ffff880001c00000) [ 8.003865] Freeing unused kernel memory: 1976K (ffff880002012000 - ffff880002200000) [ 8.200963] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 8.202368] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 8.203425] microcode: CPU2 sig=0xf61, pf=0x1, revision=0x1 [ 8.207585] microcode: CPU3 sig=0xf61, pf=0x1, revision=0x1 [ 8.211558] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.514165] random: vgscan urandom read with 20 bits of entropy available ==> /lkp/lkp/src/tmp/run_log <== Kernel tests: Boot OK! PATH=/sbin:/usr/sbin:/bin:/usr/bin ==> /lkp/lkp/src/tmp/err_log <== ==> /lkp/lkp/src/tmp/run_log <== downloading latest lkp src code Kernel tests: Boot OK 2! /lkp/lkp/src/bin/run-lkp LKP_SRC_DIR=/lkp/lkp/src RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml run-job /lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml run: pre-test run: /lkp/lkp/src/monitors/event/wait pre-test run: /lkp/lkp/src/monitors/wrapper uptime run: /lkp/lkp/src/monitors/wrapper iostat run: /lkp/lkp/src/monitors/wrapper vmstat run: /lkp/lkp/src/monitors/wrapper numa-numastat run: /lkp/lkp/src/monitors/wrapper numa-vmstat run: /lkp/lkp/src/monitors/wrapper numa-meminfo run: /lkp/lkp/src/monitors/wrapper proc-vmstat run: /lkp/lkp/src/monitors/wrapper meminfo run: /lkp/lkp/src/monitors/wrapper slabinfo run: /lkp/lkp/src/monitors/wrapper interrupts run: /lkp/lkp/src/monitors/wrapper lock_stat run: /lkp/lkp/src/monitors/wrapper latency_stats run: /lkp/lkp/src/monitors/wrapper softirqs run: /lkp/lkp/src/monitors/wrapper bdi_dev_mapping run: /lkp/lkp/src/monitors/wrapper pmeter run: /lkp/lkp/src/monitors/wrapper diskstats run: /lkp/lkp/src/monitors/wrapper zoneinfo run: /lkp/lkp/src/monitors/wrapper energy run: /lkp/lkp/src/monitors/wrapper cpuidle run: /lkp/lkp/src/monitors/wrapper turbostat run: /usr/bin/time -v -o /lkp/lkp/src/tmp/time /lkp/lkp/src/tests/micro/wrapper ltp [ 62.012562] random: nonblocking pool is initialized [ 85.767028] warning: `capget01' uses 32-bit capabilities (legacy support in use) [ 382.932150] Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details. [ 466.193846] BUG: unable to handle kernel paging request at fffffff27b92dd20 [ 466.195225] IP: [] put_page+0x5/0x28 [ 466.196263] PGD 220d067 PUD 0 [ 466.197137] Oops: 0000 [#1] SMP [ 466.197261] Modules linked in: msr microcode processor [ 466.197261] CPU: 2 PID: 30338 Comm: process_vm01 Not tainted 3.14.0-rc1-00027-g68a25f0 #1 [ 466.197261] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 466.197261] task: ffff88007c11ecc0 ti: ffff88007b92c000 task.ti: ffff88007b92c000 [ 466.197261] RIP: 0010:[] [] put_page+0x5/0x28 [ 466.197261] RSP: 0018:ffff88007b92dc98 EFLAGS: 00010286 [ 466.197261] RAX: fffffffffffffff0 RBX: 0000000000000000 RCX: 0000000000001000 [ 466.197261] RDX: 0000000000000000 RSI: 0000000097230000 RDI: fffffff27b92dd20 [ 466.197261] RBP: ffff88007b92dde8 R08: 0000000000000000 R09: 00007fe39722f001 [ 466.197261] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007c11ecc0 [ 466.197261] R13: ffff88007b92dd40 R14: fffffffffffffff2 R15: ffff88007b92de10 [ 466.197261] FS: 00007fe397228700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 466.197261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 466.197261] CR2: fffffff27b92dd20 CR3: 000000007f537000 CR4: 00000000000006e0 [ 466.197261] Stack: [ 466.197261] ffffffff811b7ea1 ffff88007b92dd40 0000000000000000 000000000000000d [ 466.197261] ffffffff81f7ad76 fffffff27b92dd20 ffff88007baa4420 0000000000000001 [ 466.197261] 0000000000000000 ffff88007b92deb0 0000000000001000 0000000000000001 [ 466.197261] Call Trace: [ 466.197261] [] ? process_vm_rw_core.isra.1+0x39f/0x444 [ 466.197261] [] ? handle_mm_fault+0x9e9/0xc9c [ 466.197261] [] ? might_fault+0x3e/0x40 [ 466.197261] [] ? rw_copy_check_uvector+0x6f/0xfd [ 466.197261] [] process_vm_rw+0xd1/0x117 [ 466.197261] [] ? do_mmap_pgoff+0x2e1/0x34c [ 466.197261] [] ? vm_mmap_pgoff+0x72/0x94 [ 466.197261] [] ? do_page_fault+0xe/0x10 [ 466.197261] [] ? trace_hardirqs_on_thunk+0x3a/0x3c [ 466.197261] [] SyS_process_vm_readv+0x16/0x18 [ 466.197261] [] system_call_fastpath+0x16/0x1b [ 466.197261] Code: 45 fc 65 48 01 04 25 50 f3 00 00 c9 c3 0f 1f 44 00 00 55 31 d2 48 c7 c6 20 01 19 81 48 89 e5 e8 d4 fe ff ff 5d c3 0f 1f 44 00 00 <48> f7 07 00 c0 00 00 55 48 89 e5 74 07 e8 d6 fa ff ff eb 0d f0 [ 466.197261] RIP [] put_page+0x5/0x28 [ 466.197261] RSP [ 466.197261] CR2: fffffff27b92dd20 [ 466.197261] ---[ end trace c832eda068281bf7 ]--- [ 466.197261] Kernel panic - not syncing: Fatal exception [ 466.197261] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 466.197261] Rebooting in 10 seconds.. Elapsed time: 190 numactl --preferred=0 --physcpubind=4-7 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 -append 'user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal' -initrd /fs/sdb1/initrd-vpx-1 -m 4G -smp 4 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::9334-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdb1/disk0-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk1-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk2-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk3-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk4-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk5-vpx-1,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vpx-1 -serial file:/dev/shm/kboot/serial-vpx-1 -daemonize -display none -monitor null