[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1392116390-23798-1-git-send-email-sagar.a.kamble@intel.com>
Date: Tue, 11 Feb 2014 16:29:50 +0530
From: sagar.a.kamble@...el.com
To: intel-gfx@...ts.freedesktop.org
Cc: Sagar Kamble <sagar.a.kamble@...el.com>,
Daniel Vetter <daniel.vetter@...ll.ch>,
Jani Nikula <jani.nikula@...ux.intel.com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
vijay.a.purushothaman@...el.com,
Uma Shankar <uma.shankar@...el.com>
Subject: [PATCH v5 1/1] drm/i915: Add 180 degree primary plane rotation support
From: Sagar Kamble <sagar.a.kamble@...el.com>
Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.
v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.
v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.
v4: Updated rotation checks for pending flips, fbc disable. Creating
rotation property only for Gen4 onwards. Property resetting as part
of lastclose.
v5: Resetting property in i915_driver_lastclose properly for planes
and crtcs. Fixed linear offset calculation that was off by 1 w.r.t
width in i9xx_update_plane and ironlake_update_plane. Removed tab
based indentation and unnecessary braces in intel_crtc_set_property
and intel_update_fbc. FBC and flip related checks should be done only
for valid crtcs.
Cc: Daniel Vetter <daniel.vetter@...ll.ch>
Cc: Jani Nikula <jani.nikula@...ux.intel.com>
Cc: David Airlie <airlied@...ux.ie>
Cc: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org
Cc: vijay.a.purushothaman@...el.com
Signed-off-by: Uma Shankar <uma.shankar@...el.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@...el.com>
---
drivers/gpu/drm/i915/i915_dma.c | 17 +++++++
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 86 ++++++++++++++++++++++++++++++++++--
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_pm.c | 9 ++++
5 files changed, 111 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 258b1be..19e22a2 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1836,6 +1836,8 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file)
void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ struct intel_crtc *crtc;
+ struct intel_plane *plane;
/* On gen6+ we refuse to init without kms enabled, but then the drm core
* goes right around and calls lastclose. Check for this and don't clean
@@ -1843,6 +1845,21 @@ void i915_driver_lastclose(struct drm_device * dev)
if (!dev_priv)
return;
+ if (dev_priv->rotation_property) {
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ crtc->rotation = BIT(DRM_ROTATE_0);
+ drm_object_property_set_value(&crtc->base.base,
+ dev_priv->rotation_property,
+ crtc->rotation);
+ }
+ list_for_each_entry(plane, &dev->mode_config.plane_list, base.head) {
+ plane->rotation = BIT(DRM_ROTATE_0);
+ drm_object_property_set_value(&plane->base.base,
+ dev_priv->rotation_property,
+ plane->rotation);
+ }
+ }
+
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_fbdev_restore_mode(dev);
vga_switcheroo_process_delayed_switch();
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 57906c5..d3000c4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3553,6 +3553,7 @@
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_ROTATE_180 (1<<15)
#define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */
#define DISPPLANE_TILED (1<<10)
#define _DSPAADDR (dev_priv->info->display_mmio_offset + 0x70184)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4d4a0d9..fad43b0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
unsigned long linear_offset;
u32 dspcntr;
u32 reg;
+ int pixel_size;
switch (plane) {
case 0:
@@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
return -EINVAL;
}
+ pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
@@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
dspcntr = I915_READ(reg);
/* Mask out pixel format bits in case we change it */
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+ dspcntr &= ~DISPPLANE_ROTATE_180;
+
switch (fb->pixel_format) {
case DRM_FORMAT_C8:
dspcntr |= DISPPLANE_8BPP;
@@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
if (IS_G4X(dev))
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- I915_WRITE(reg, dspcntr);
-
linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
if (INTEL_INFO(dev)->gen >= 4) {
@@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
intel_crtc->dspaddr_offset = linear_offset;
}
+ if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
+ dspcntr |= DISPPLANE_ROTATE_180;
+
+ x += (intel_crtc->config.pipe_src_w - 1);
+ y += (intel_crtc->config.pipe_src_h - 1);
+ linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+ (intel_crtc->config.pipe_src_w - 1) * pixel_size;
+ }
+
+ I915_WRITE(reg, dspcntr);
+
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
fb->pitches[0]);
@@ -2137,6 +2150,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
unsigned long linear_offset;
u32 dspcntr;
u32 reg;
+ int pixel_size;
switch (plane) {
case 0:
@@ -2148,6 +2162,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
return -EINVAL;
}
+ pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
@@ -2155,6 +2170,8 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
dspcntr = I915_READ(reg);
/* Mask out pixel format bits in case we change it */
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+ dspcntr &= ~DISPPLANE_ROTATE_180;
+
switch (fb->pixel_format) {
case DRM_FORMAT_C8:
dspcntr |= DISPPLANE_8BPP;
@@ -2192,8 +2209,6 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
else
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
- I915_WRITE(reg, dspcntr);
-
linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
intel_crtc->dspaddr_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
@@ -2201,6 +2216,19 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
fb->pitches[0]);
linear_offset -= intel_crtc->dspaddr_offset;
+ if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
+ dspcntr |= DISPPLANE_ROTATE_180;
+
+ if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+ x += (intel_crtc->config.pipe_src_w - 1);
+ y += (intel_crtc->config.pipe_src_h - 1);
+ linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+ (intel_crtc->config.pipe_src_w - 1) * pixel_size;
+ }
+ }
+
+ I915_WRITE(reg, dspcntr);
+
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
fb->pitches[0]);
@@ -8748,6 +8776,42 @@ free_work:
return ret;
}
+static int intel_crtc_set_property(struct drm_crtc *crtc,
+ struct drm_property *prop,
+ uint64_t val)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint64_t old_val;
+ int ret = -ENOENT;
+
+ if (prop == dev_priv->rotation_property) {
+ /* exactly one rotation angle please */
+ if (hweight32(val & 0xf) != 1)
+ return -EINVAL;
+
+ old_val = intel_crtc->rotation;
+ intel_crtc->rotation = val;
+
+ if (intel_crtc->active) {
+ /* Updating rotation on plane should be done after pending flips.
+ FBC does not work on some platforms for rotated planes */
+ intel_crtc_wait_for_pending_flips(crtc);
+ if (dev_priv->fbc.plane == intel_crtc->plane &&
+ INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+ intel_crtc->rotation != BIT(DRM_ROTATE_0))
+ intel_disable_fbc(dev);
+
+ ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
+ if (ret)
+ intel_crtc->rotation = old_val;
+ }
+ }
+
+ return ret;
+}
+
static struct drm_crtc_helper_funcs intel_helper_funcs = {
.mode_set_base_atomic = intel_pipe_set_base_atomic,
.load_lut = intel_crtc_load_lut,
@@ -10160,6 +10224,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
.set_config = intel_crtc_set_config,
.destroy = intel_crtc_destroy,
.page_flip = intel_crtc_page_flip,
+ .set_property = intel_crtc_set_property
};
static void intel_cpu_pll_init(struct drm_device *dev)
@@ -10288,6 +10353,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
*/
intel_crtc->pipe = pipe;
intel_crtc->plane = pipe;
+ intel_crtc->rotation = BIT(DRM_ROTATE_0);
if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
intel_crtc->plane = !pipe;
@@ -10298,6 +10364,18 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
+ if (INTEL_INFO(dev)->gen >= 4) {
+ if (!dev_priv->rotation_property)
+ dev_priv->rotation_property =
+ drm_mode_create_rotation_property(dev,
+ BIT(DRM_ROTATE_0) |
+ BIT(DRM_ROTATE_180));
+ if (dev_priv->rotation_property)
+ drm_object_attach_property(&intel_crtc->base.base,
+ dev_priv->rotation_property,
+ intel_crtc->rotation);
+ }
+
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7a79b8e..02dfdb6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -331,6 +331,8 @@ struct intel_crtc {
struct drm_crtc base;
enum pipe pipe;
enum plane plane;
+ unsigned int rotation;
+
u8 lut_r[256], lut_g[256], lut_b[256];
/*
* Whether the crtc and the connected output pipeline is active. Implies
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 3c79b63..c7cfa71 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -508,6 +508,15 @@ void intel_update_fbc(struct drm_device *dev)
obj = intel_fb->obj;
adjusted_mode = &intel_crtc->config.adjusted_mode;
+ if (dev_priv->fbc.plane == intel_crtc->plane &&
+ INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+ intel_crtc->rotation != BIT(DRM_ROTATE_0)) {
+ if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE))
+ DRM_DEBUG_KMS("mode incompatible with compression, "
+ "disabling\n");
+ goto out_disable;
+ }
+
if (i915.enable_fbc < 0 &&
INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
--
1.8.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists