| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1392123837-5517-12-git-send-email-k.kozlowski@samsung.com>
Date: Tue, 11 Feb 2014 14:03:54 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Sangbeom Kim <sbkim73@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>
Subject: [PATCH 11/14] regulator: s2mps11: Add opmode for S2MPS14 regulators
S2MPS11/S2MPS14 regulators support different modes of operation:
- Always off;
- On/Off controlled by pin/GPIO (PWREN/LDOEN/EMMCEN);
- Always on;
This is very similar to S5M8767 regulator driver which also supports
opmodes (although S5M8767 have also low-power mode).
This patch adds parsing the operation mode from DTS by reading a
"op_mode" property from regulator child node.
The op_mode is then used for enabling the S2MPS14 regulators.
On S2MPS11 the DTS "op_mode" property is parsed but not used for
enabling, as this was not tested.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Cc: Mark Brown <broonie@...nel.org>
Cc: Liam Girdwood <lgirdwood@...il.com>
---
drivers/regulator/s2mps11.c | 98 ++++++++++++++++++++++++++++++++++-
include/linux/mfd/samsung/s2mps14.h | 17 ++++++
2 files changed, 114 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index c37869fb6c7a..b30fa6cd370d 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -34,6 +34,7 @@
struct s2mps11_info {
struct regulator_dev **rdev;
unsigned int rdev_num;
+ struct sec_opmode_data *opmode;
int ramp_delay2;
int ramp_delay34;
@@ -43,6 +44,48 @@ struct s2mps11_info {
int ramp_delay9;
};
+/* LDO_EN/BUCK_EN register values for enabling/disabling regulator */
+static unsigned int s2mps14_opmode_reg[4] = {
+ [S2MPS14_REGULATOR_OPMODE_OFF] = 0x0,
+ [S2MPS14_REGULATOR_OPMODE_ON] = 0x3,
+ [S2MPS14_REGULATOR_OPMODE_RESERVED] = 0x2,
+ [S2MPS14_REGULATOR_OPMODE_SUSPEND] = 0x1,
+};
+
+static int s2mps14_get_opmode(struct regulator_dev *rdev)
+{
+ int i, reg_id = rdev_get_id(rdev);
+ int mode = -EINVAL;
+ struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+
+ for (i = 0; i < s2mps11->rdev_num; i++) {
+ if (s2mps11->opmode[i].id == reg_id) {
+ mode = s2mps11->opmode[i].mode;
+ break;
+ }
+ }
+
+ if (mode == -EINVAL) {
+ dev_warn(rdev_get_dev(rdev),
+ "No op_mode in the driver for regulator %s\n",
+ rdev->desc->name);
+ return mode;
+ }
+
+ return s2mps14_opmode_reg[mode] << S2MPS14_ENCTRL_SHIFT;
+}
+
+static int s2mps14_reg_enable(struct regulator_dev *rdev)
+{
+ int enable_ctrl = s2mps14_get_opmode(rdev);
+
+ if (enable_ctrl < 0)
+ return enable_ctrl;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ S2MPS14_ENCTRL_MASK, enable_ctrl);
+}
+
static int get_ramp_delay(int ramp_delay)
{
unsigned char cnt = 0;
@@ -405,7 +448,7 @@ static struct regulator_ops s2mps14_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
- .enable = regulator_enable_regmap,
+ .enable = s2mps14_reg_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -519,6 +562,54 @@ static const struct regulator_desc s2mps14_regulators[] = {
regulator_desc_s2mps14_buck1235(5),
};
+static inline void s2mps11_dt_read_opmode(struct platform_device *pdev,
+ struct device_node *np, unsigned int *mode)
+{
+ if (of_property_read_u32(np, "op_mode", mode)) {
+ dev_warn(&pdev->dev, "no op_mode property property at %s\n",
+ np->full_name);
+ *mode = S2MPS14_REGULATOR_OPMODE_ON;
+ } else if (*mode >= S2MPS14_REGULATOR_OPMODE_MAX ||
+ *mode == S2MPS14_REGULATOR_OPMODE_RESERVED) {
+ dev_warn(&pdev->dev, "wrong op_mode value at %s\n",
+ np->full_name);
+ *mode = S2MPS14_REGULATOR_OPMODE_ON;
+ }
+ /* else: 'mode' was read from DTS and it is valid */
+}
+
+/*
+ * Returns allocated array with opmodes for regulators. The opmodes are read
+ * from DTS.
+ */
+static struct sec_opmode_data *
+s2mps11_pmic_dt_parse_opmode(struct platform_device *pdev,
+ struct s2mps11_info *s2mps11, struct of_regulator_match *rdata,
+ const struct regulator_desc *regulators)
+{
+ struct sec_opmode_data *rmode;
+ int i;
+
+ rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) * s2mps11->rdev_num,
+ GFP_KERNEL);
+ if (!rmode) {
+ dev_err(&pdev->dev,
+ "could not allocate memory for regulator mode\n");
+ return NULL;
+ }
+
+ for (i = 0; i < s2mps11->rdev_num; i++) {
+ /*
+ * The index of rdata and regulators is the same, but this
+ * may not be equal to ID of regulator.
+ */
+ rmode[i].id = regulators[i].id;
+ s2mps11_dt_read_opmode(pdev, rdata[i].of_node, &rmode[i].mode);
+ }
+
+ return rmode;
+}
+
static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -581,9 +672,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
}
of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
+ pdata->opmode = s2mps11_pmic_dt_parse_opmode(pdev, s2mps11, rdata,
+ regulators);
+ if (!pdata->opmode)
+ return -ENOMEM;
common_reg:
platform_set_drvdata(pdev, s2mps11);
+ s2mps11->opmode = pdata->opmode;
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h
index c4bfb8edc836..69582ae4c971 100644
--- a/include/linux/mfd/samsung/s2mps14.h
+++ b/include/linux/mfd/samsung/s2mps14.h
@@ -149,4 +149,21 @@ enum s2mps14_regulators {
#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1)
#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1)
+#define S2MPS14_ENCTRL_SHIFT 6
+#define S2MPS14_ENCTRL_MASK (0x3 << S2MPS14_ENCTRL_SHIFT)
+
+/*
+ * Values of regulator operation modes match device tree bindings.
+ */
+enum s2mps14_regulator_opmode {
+ S2MPS14_REGULATOR_OPMODE_OFF = 0,
+ S2MPS14_REGULATOR_OPMODE_ON = 1,
+ /* Reserved for compatibility with S5M8767 where this
+ * is a low power mode. */
+ S2MPS14_REGULATOR_OPMODE_RESERVED = 2,
+ S2MPS14_REGULATOR_OPMODE_SUSPEND = 3,
+
+ S2MPS14_REGULATOR_OPMODE_MAX,
+};
+
#endif /* __LINUX_MFD_S2MPS14_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists