| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1392132562-23644-2-git-send-email-stefan.sorensen@spectralink.com>
Date: Tue, 11 Feb 2014 16:29:21 +0100
From: Stefan Sørensen
<stefan.sorensen@...ctralink.com>
To: richardcochran@...il.com, grant.likely@...aro.org,
robh+dt@...nel.org, mark.rutland@....com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Cc: Stefan Sørensen
<stefan.sorensen@...ctralink.com>
Subject: [PATCH v2 1/2] dp83640: Support a configurable number of periodic outputs
The driver is currently limited to a single periodic output. This patch makes
the number of peridodic output dynamic by dropping the gpio_tab module
parameter and adding calibrate_pin, perout_pins, and extts_pins parameters.
Signed-off-by: Stefan Sørensen <stefan.sorensen@...ctralink.com>
---
drivers/net/phy/dp83640.c | 75 ++++++++++++++++++++---------------------------
1 file changed, 32 insertions(+), 43 deletions(-)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 547725f..d4fe95d 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -38,15 +38,11 @@
#define LAYER4 0x02
#define LAYER2 0x01
#define MAX_RXTS 64
-#define N_EXT_TS 6
+#define N_EXT 8
#define PSF_PTPVER 2
#define PSF_EVNT 0x4000
#define PSF_RX 0x2000
#define PSF_TX 0x1000
-#define EXT_EVENT 1
-#define CAL_EVENT 7
-#define CAL_TRIGGER 7
-#define PER_TRIGGER 6
#define MII_DP83640_MICR 0x11
#define MII_DP83640_MISR 0x12
@@ -146,32 +142,24 @@ struct dp83640_clock {
struct ptp_clock *ptp_clock;
};
-/* globals */
-
-enum {
- CALIBRATE_GPIO,
- PEROUT_GPIO,
- EXTTS0_GPIO,
- EXTTS1_GPIO,
- EXTTS2_GPIO,
- EXTTS3_GPIO,
- EXTTS4_GPIO,
- EXTTS5_GPIO,
- GPIO_TABLE_SIZE
-};
static int chosen_phy = -1;
-static ushort gpio_tab[GPIO_TABLE_SIZE] = {
- 1, 2, 3, 4, 8, 9, 10, 11
-};
+static int calibrate_pin = 1;
+static int perout_pins[N_EXT] = {2};
+static int n_per_out = 1;
+static int extts_pins[N_EXT] = {3, 4, 8, 9, 10, 11};
+static int n_ext_ts = 6;
module_param(chosen_phy, int, 0444);
-module_param_array(gpio_tab, ushort, NULL, 0444);
+module_param(calibrate_pin, int, 0444);
+module_param_array(perout_pins, int, &n_per_out, 0444);
+module_param_array(extts_pins, int, &n_ext_ts, 0444);
MODULE_PARM_DESC(chosen_phy, \
"The address of the PHY to use for the ancillary clock features");
-MODULE_PARM_DESC(gpio_tab, \
- "Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
+MODULE_PARM_DESC(calibrate_pin, "Which pin to use for calibration");
+MODULE_PARM_DESC(perout_pins, "Which pins to use for periodic output");
+MODULE_PARM_DESC(extts_pins, "Which pins to use for external timestamping");
/* a list of clocks and a mutex to protect it */
static LIST_HEAD(phyter_clocks);
@@ -267,15 +255,16 @@ static u64 phy2txts(struct phy_txts *p)
}
static void periodic_output(struct dp83640_clock *clock,
- struct ptp_clock_request *clkreq, bool on)
+ struct ptp_clock_request *clkreq, int index,
+ bool on)
{
struct dp83640_private *dp83640 = clock->chosen;
struct phy_device *phydev = dp83640->phydev;
u32 sec, nsec, period;
u16 gpio, ptp_trig, trigger, val;
- gpio = on ? gpio_tab[PEROUT_GPIO] : 0;
- trigger = PER_TRIGGER;
+ gpio = on ? perout_pins[index] : 0;
+ trigger = n_ext_ts + index;
ptp_trig = TRIG_WR |
(trigger & TRIG_CSEL_MASK) << TRIG_CSEL_SHIFT |
@@ -430,12 +419,12 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
switch (rq->type) {
case PTP_CLK_REQ_EXTTS:
index = rq->extts.index;
- if (index < 0 || index >= N_EXT_TS)
+ if (index < 0 || index >= n_ext_ts)
return -EINVAL;
- event_num = EXT_EVENT + index;
+ event_num = index;
evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
if (on) {
- gpio_num = gpio_tab[EXTTS0_GPIO + index];
+ gpio_num = extts_pins[index];
evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
evnt |= EVNT_RISE;
}
@@ -443,9 +432,10 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
return 0;
case PTP_CLK_REQ_PEROUT:
- if (rq->perout.index != 0)
+ index = rq->perout.index;
+ if (index < 0 || index >= n_per_out)
return -EINVAL;
- periodic_output(clock, rq, on);
+ periodic_output(clock, rq, index, on);
return 0;
default:
@@ -538,10 +528,9 @@ static void recalibrate(struct dp83640_clock *clock)
struct list_head *this;
struct dp83640_private *tmp;
struct phy_device *master = clock->chosen->phydev;
- u16 cal_gpio, cfg0, evnt, ptp_trig, trigger, val;
+ u16 cfg0, evnt, ptp_trig, trigger, val;
- trigger = CAL_TRIGGER;
- cal_gpio = gpio_tab[CALIBRATE_GPIO];
+ trigger = n_ext_ts + n_per_out;
mutex_lock(&clock->extreg_lock);
@@ -564,8 +553,8 @@ static void recalibrate(struct dp83640_clock *clock)
* enable an event timestamp
*/
evnt = EVNT_WR | EVNT_RISE | EVNT_SINGLE;
- evnt |= (CAL_EVENT & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
- evnt |= (cal_gpio & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
+ evnt |= (trigger & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
+ evnt |= (calibrate_pin & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
list_for_each(this, &clock->phylist) {
tmp = list_entry(this, struct dp83640_private, list);
@@ -578,7 +567,7 @@ static void recalibrate(struct dp83640_clock *clock)
*/
ptp_trig = TRIG_WR | TRIG_IF_LATE | TRIG_PULSE;
ptp_trig |= (trigger & TRIG_CSEL_MASK) << TRIG_CSEL_SHIFT;
- ptp_trig |= (cal_gpio & TRIG_GPIO_MASK) << TRIG_GPIO_SHIFT;
+ ptp_trig |= (calibrate_pin & TRIG_GPIO_MASK) << TRIG_GPIO_SHIFT;
ext_write(0, master, PAGE5, PTP_TRIG, ptp_trig);
/* load trigger */
@@ -642,7 +631,7 @@ static void recalibrate(struct dp83640_clock *clock)
static inline u16 exts_chan_to_edata(int ch)
{
- return 1 << ((ch + EXT_EVENT) * 2);
+ return 1 << ((ch) * 2);
}
static int decode_evnt(struct dp83640_private *dp83640,
@@ -676,14 +665,14 @@ static int decode_evnt(struct dp83640_private *dp83640,
parsed = words + 2;
} else {
parsed = words + 1;
- i = ((ests >> EVNT_NUM_SHIFT) & EVNT_NUM_MASK) - EXT_EVENT;
+ i = ((ests >> EVNT_NUM_SHIFT) & EVNT_NUM_MASK);
ext_status = exts_chan_to_edata(i);
}
event.type = PTP_CLOCK_EXTTS;
event.timestamp = phy2txts(&dp83640->edata);
- for (i = 0; i < N_EXT_TS; i++) {
+ for (i = 0; i < n_ext_ts; i++) {
if (ext_status & exts_chan_to_edata(i)) {
event.index = i;
ptp_clock_event(dp83640->clock->ptp_clock, &event);
@@ -889,8 +878,8 @@ static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus)
sprintf(clock->caps.name, "dp83640 timer");
clock->caps.max_adj = 1953124;
clock->caps.n_alarm = 0;
- clock->caps.n_ext_ts = N_EXT_TS;
- clock->caps.n_per_out = 1;
+ clock->caps.n_ext_ts = n_ext_ts;
+ clock->caps.n_per_out = n_per_out;
clock->caps.pps = 0;
clock->caps.adjfreq = ptp_dp83640_adjfreq;
clock->caps.adjtime = ptp_dp83640_adjtime;
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists