| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <52FB3075.2060308@samsung.com>
Date: Wed, 12 Feb 2014 09:27:33 +0100
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: Laura Abbott <lauraa@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
David Brown <davidb@...eaurora.org>,
Daniel Walker <dwalker@...o99.com>,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Eric Miao <eric.y.miao@...il.com>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Ben Dooks <ben-linux@...ff.org>,
Kukjin Kim <kgene.kim@...sung.com>,
linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Leif Lindholm <leif.lindholm@...aro.org>,
Grygorii Strashko <grygorii.strashko@...com>,
Catalin Marinas <catalin.marinas@....com>,
Rob Herring <robherring2@...il.com>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
Will Deacon <will.deacon@....com>,
Nicolas Pitre <nicolas.pitre@...aro.org>,
Santosh Shilimkar <santosh.shilimkar@...com>,
linux-mm@...ck.org, Andrew Morton <akpm@...ux-foundation.org>,
Courtney Cavin <courtney.cavin@...ymobile.com>,
Grant Likely <grant.likely@...retlab.ca>
Subject: Re: [PATCHv3 2/2] arm: Get rid of meminfo
Hello,
On 2014-02-11 22:14, Laura Abbott wrote:
> memblock is now fully integrated into the kernel and is the prefered
> method for tracking memory. Rather than reinvent the wheel with
> meminfo, migrate to using memblock directly instead of meminfo as
> an intermediate.
>
> Acked-by: Jason Cooper <jason@...edaemon.net>
> Acked-by: Catalin Marinas <catalin.marinas@....com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@...com>
> Tested-by: Leif Lindholm <leif.lindholm@...aro.org>
> Signed-off-by: Laura Abbott <lauraa@...eaurora.org>
Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>
> ---
> arch/arm/include/asm/mach/arch.h | 4 +-
> arch/arm/include/asm/memblock.h | 3 +-
> arch/arm/include/asm/setup.h | 23 ------
> arch/arm/kernel/atags_parse.c | 5 +-
> arch/arm/kernel/devtree.c | 5 --
> arch/arm/kernel/setup.c | 30 ++------
> arch/arm/mach-clps711x/board-clep7312.c | 7 +-
> arch/arm/mach-clps711x/board-edb7211.c | 10 +--
> arch/arm/mach-clps711x/board-p720t.c | 2 +-
> arch/arm/mach-footbridge/cats-hw.c | 2 +-
> arch/arm/mach-footbridge/netwinder-hw.c | 2 +-
> arch/arm/mach-msm/board-halibut.c | 6 --
> arch/arm/mach-msm/board-mahimahi.c | 13 +---
> arch/arm/mach-msm/board-msm7x30.c | 3 +-
> arch/arm/mach-msm/board-sapphire.c | 13 ++--
> arch/arm/mach-msm/board-trout.c | 8 +--
> arch/arm/mach-orion5x/common.c | 3 +-
> arch/arm/mach-orion5x/common.h | 3 +-
> arch/arm/mach-pxa/cm-x300.c | 3 +-
> arch/arm/mach-pxa/corgi.c | 10 +--
> arch/arm/mach-pxa/eseries.c | 9 +--
> arch/arm/mach-pxa/poodle.c | 8 +--
> arch/arm/mach-pxa/spitz.c | 8 +--
> arch/arm/mach-pxa/tosa.c | 8 +--
> arch/arm/mach-realview/core.c | 11 +--
> arch/arm/mach-realview/core.h | 3 +-
> arch/arm/mach-realview/realview_pb1176.c | 8 +--
> arch/arm/mach-realview/realview_pbx.c | 17 ++---
> arch/arm/mach-s3c24xx/mach-smdk2413.c | 8 +--
> arch/arm/mach-s3c24xx/mach-vstms.c | 8 +--
> arch/arm/mach-sa1100/assabet.c | 2 +-
> arch/arm/mm/init.c | 67 +++++++-----------
> arch/arm/mm/mmu.c | 115 +++++++++---------------------
> 33 files changed, 136 insertions(+), 291 deletions(-)
>
> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
> index 17a3fa2..c43473a 100644
> --- a/arch/arm/include/asm/mach/arch.h
> +++ b/arch/arm/include/asm/mach/arch.h
> @@ -14,7 +14,6 @@
> #include <linux/reboot.h>
>
> struct tag;
> -struct meminfo;
> struct pt_regs;
> struct smp_operations;
> #ifdef CONFIG_SMP
> @@ -47,8 +46,7 @@ struct machine_desc {
> enum reboot_mode reboot_mode; /* default restart mode */
> struct smp_operations *smp; /* SMP operations */
> bool (*smp_init)(void);
> - void (*fixup)(struct tag *, char **,
> - struct meminfo *);
> + void (*fixup)(struct tag *, char **);
> void (*init_meminfo)(void);
> void (*reserve)(void);/* reserve mem blocks */
> void (*map_io)(void);/* IO mapping function */
> diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
> index c2f5102..bf47a6c 100644
> --- a/arch/arm/include/asm/memblock.h
> +++ b/arch/arm/include/asm/memblock.h
> @@ -1,10 +1,9 @@
> #ifndef _ASM_ARM_MEMBLOCK_H
> #define _ASM_ARM_MEMBLOCK_H
>
> -struct meminfo;
> struct machine_desc;
>
> -void arm_memblock_init(struct meminfo *, const struct machine_desc *);
> +void arm_memblock_init(const struct machine_desc *);
> phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align);
>
> #endif
> diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
> index 8d6a089..0196091 100644
> --- a/arch/arm/include/asm/setup.h
> +++ b/arch/arm/include/asm/setup.h
> @@ -26,29 +26,6 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
> */
> #define NR_BANKS CONFIG_ARM_NR_BANKS
>
> -struct membank {
> - phys_addr_t start;
> - phys_addr_t size;
> - unsigned int highmem;
> -};
> -
> -struct meminfo {
> - int nr_banks;
> - struct membank bank[NR_BANKS];
> -};
> -
> -extern struct meminfo meminfo;
> -
> -#define for_each_bank(iter,mi) \
> - for (iter = 0; iter < (mi)->nr_banks; iter++)
> -
> -#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
> -#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
> -#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
> -#define bank_phys_start(bank) (bank)->start
> -#define bank_phys_end(bank) ((bank)->start + (bank)->size)
> -#define bank_phys_size(bank) (bank)->size
> -
> extern int arm_add_memory(u64 start, u64 size);
> extern void early_print(const char *str, ...);
> extern void dump_machine_table(void);
> diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
> index 8c14de8..7807ef5 100644
> --- a/arch/arm/kernel/atags_parse.c
> +++ b/arch/arm/kernel/atags_parse.c
> @@ -22,6 +22,7 @@
> #include <linux/fs.h>
> #include <linux/root_dev.h>
> #include <linux/screen_info.h>
> +#include <linux/memblock.h>
>
> #include <asm/setup.h>
> #include <asm/system_info.h>
> @@ -222,10 +223,10 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
> }
>
> if (mdesc->fixup)
> - mdesc->fixup(tags, &from, &meminfo);
> + mdesc->fixup(tags, &from);
>
> if (tags->hdr.tag == ATAG_CORE) {
> - if (meminfo.nr_banks != 0)
> + if (memblock_phys_mem_size())
> squash_mem_tags(tags);
> save_atags(tags);
> parse_tags(tags);
> diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
> index f751714..398cd5f 100644
> --- a/arch/arm/kernel/devtree.c
> +++ b/arch/arm/kernel/devtree.c
> @@ -26,11 +26,6 @@
> #include <asm/mach/arch.h>
> #include <asm/mach-types.h>
>
> -void __init early_init_dt_add_memory_arch(u64 base, u64 size)
> -{
> - arm_add_memory(base, size);
> -}
> -
> void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
> {
> return memblock_virt_alloc(size, align);
> diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> index 1e8b030..7dd83d0 100644
> --- a/arch/arm/kernel/setup.c
> +++ b/arch/arm/kernel/setup.c
> @@ -625,15 +625,8 @@ void __init dump_machine_table(void)
>
> int __init arm_add_memory(u64 start, u64 size)
> {
> - struct membank *bank = &meminfo.bank[meminfo.nr_banks];
> u64 aligned_start;
>
> - if (meminfo.nr_banks >= NR_BANKS) {
> - pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n",
> - (long long)start);
> - return -EINVAL;
> - }
> -
> /*
> * Ensure that start/size are aligned to a page boundary.
> * Size is appropriately rounded down, start is rounded up.
> @@ -674,17 +667,17 @@ int __init arm_add_memory(u64 start, u64 size)
> aligned_start = PHYS_OFFSET;
> }
>
> - bank->start = aligned_start;
> - bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
> + start = aligned_start;
> + size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
>
> /*
> * Check whether this memory region has non-zero size or
> * invalid node number.
> */
> - if (bank->size == 0)
> + if (size == 0)
> return -EINVAL;
>
> - meminfo.nr_banks++;
> + memblock_add(start, size);
> return 0;
> }
>
> @@ -692,6 +685,7 @@ int __init arm_add_memory(u64 start, u64 size)
> * Pick out the memory size. We look for mem=size@...rt,
> * where start and size are "size[KkMm]"
> */
> +
> static int __init early_mem(char *p)
> {
> static int usermem __initdata = 0;
> @@ -706,7 +700,8 @@ static int __init early_mem(char *p)
> */
> if (usermem == 0) {
> usermem = 1;
> - meminfo.nr_banks = 0;
> + memblock_remove(memblock_start_of_DRAM(),
> + memblock_end_of_DRAM() - memblock_start_of_DRAM());
> }
>
> start = PHYS_OFFSET;
> @@ -851,13 +846,6 @@ static void __init reserve_crashkernel(void)
> static inline void reserve_crashkernel(void) {}
> #endif /* CONFIG_KEXEC */
>
> -static int __init meminfo_cmp(const void *_a, const void *_b)
> -{
> - const struct membank *a = _a, *b = _b;
> - long cmp = bank_pfn_start(a) - bank_pfn_start(b);
> - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
> -}
> -
> void __init hyp_mode_check(void)
> {
> #ifdef CONFIG_ARM_VIRT_EXT
> @@ -900,12 +888,10 @@ void __init setup_arch(char **cmdline_p)
>
> parse_early_param();
>
> - sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
> -
> early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
> setup_dma_zone(mdesc);
> sanity_check_meminfo();
> - arm_memblock_init(&meminfo, mdesc);
> + arm_memblock_init(mdesc);
>
> paging_init(mdesc);
> request_standard_resources(mdesc);
> diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
> index b476424..4d04b91 100644
> --- a/arch/arm/mach-clps711x/board-clep7312.c
> +++ b/arch/arm/mach-clps711x/board-clep7312.c
> @@ -18,6 +18,7 @@
> #include <linux/init.h>
> #include <linux/types.h>
> #include <linux/string.h>
> +#include <linux/memblock.h>
>
> #include <asm/setup.h>
> #include <asm/mach-types.h>
> @@ -26,11 +27,9 @@
> #include "common.h"
>
> static void __init
> -fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
> +fixup_clep7312(struct tag *tags, char **cmdline)
> {
> - mi->nr_banks=1;
> - mi->bank[0].start = 0xc0000000;
> - mi->bank[0].size = 0x01000000;
> + memblock_add(0xc0000000, 0x01000000);
> }
>
> MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
> diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
> index fe6184e..b617aa2 100644
> --- a/arch/arm/mach-clps711x/board-edb7211.c
> +++ b/arch/arm/mach-clps711x/board-edb7211.c
> @@ -16,6 +16,7 @@
> #include <linux/interrupt.h>
> #include <linux/backlight.h>
> #include <linux/platform_device.h>
> +#include <linux/memblock.h>
>
> #include <linux/mtd/physmap.h>
> #include <linux/mtd/partitions.h>
> @@ -133,7 +134,7 @@ static void __init edb7211_reserve(void)
> }
>
> static void __init
> -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
> +fixup_edb7211(struct tag *tags, char **cmdline)
> {
> /*
> * Bank start addresses are not present in the information
> @@ -143,11 +144,8 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
> * Banks sizes _are_ present in the param block, but we're
> * not using that information yet.
> */
> - mi->bank[0].start = 0xc0000000;
> - mi->bank[0].size = SZ_8M;
> - mi->bank[1].start = 0xc1000000;
> - mi->bank[1].size = SZ_8M;
> - mi->nr_banks = 2;
> + memblock_add(0xc0000000, SZ_8M);
> + memblock_add(0xc1000000, SZ_8M);
> }
>
> static void __init edb7211_init(void)
> diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
> index dd81b06..c1c6729 100644
> --- a/arch/arm/mach-clps711x/board-p720t.c
> +++ b/arch/arm/mach-clps711x/board-p720t.c
> @@ -295,7 +295,7 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
> };
>
> static void __init
> -fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
> +fixup_p720t(struct tag *tag, char **cmdline)
> {
> /*
> * Our bootloader doesn't setup any tags (yet).
> diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
> index 9669cc0..de86ab6 100644
> --- a/arch/arm/mach-footbridge/cats-hw.c
> +++ b/arch/arm/mach-footbridge/cats-hw.c
> @@ -76,7 +76,7 @@ __initcall(cats_hw_init);
> * hard reboots fail on early boards.
> */
> static void __init
> -fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
> +fixup_cats(struct tag *tags, char **cmdline)
> {
> screen_info.orig_video_lines = 25;
> screen_info.orig_video_points = 16;
> diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
> index eb1fa5c..cdee08c 100644
> --- a/arch/arm/mach-footbridge/netwinder-hw.c
> +++ b/arch/arm/mach-footbridge/netwinder-hw.c
> @@ -620,7 +620,7 @@ __initcall(nw_hw_init);
> * the parameter page.
> */
> static void __init
> -fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
> +fixup_netwinder(struct tag *tags, char **cmdline)
> {
> #ifdef CONFIG_ISAPNP
> extern int isapnp_disable;
> diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
> index a775298..61bfe58 100644
> --- a/arch/arm/mach-msm/board-halibut.c
> +++ b/arch/arm/mach-msm/board-halibut.c
> @@ -83,11 +83,6 @@ static void __init halibut_init(void)
> platform_add_devices(devices, ARRAY_SIZE(devices));
> }
>
> -static void __init halibut_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> -{
> -}
> -
> static void __init halibut_map_io(void)
> {
> msm_map_common_io();
> @@ -100,7 +95,6 @@ static void __init halibut_init_late(void)
>
> MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
> .atag_offset = 0x100,
> - .fixup = halibut_fixup,
> .map_io = halibut_map_io,
> .init_early = halibut_init_early,
> .init_irq = halibut_init_irq,
> diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
> index 7d9981c..873c3ca 100644
> --- a/arch/arm/mach-msm/board-mahimahi.c
> +++ b/arch/arm/mach-msm/board-mahimahi.c
> @@ -22,6 +22,7 @@
> #include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/platform_device.h>
> +#include <linux/memblock.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> @@ -52,16 +53,10 @@ static void __init mahimahi_init(void)
> platform_add_devices(devices, ARRAY_SIZE(devices));
> }
>
> -static void __init mahimahi_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init mahimahi_fixup(struct tag *tags, char **cmdline)
> {
> - mi->nr_banks = 2;
> - mi->bank[0].start = PHYS_OFFSET;
> - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
> - mi->bank[0].size = (219*1024*1024);
> - mi->bank[1].start = MSM_HIGHMEM_BASE;
> - mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
> - mi->bank[1].size = MSM_HIGHMEM_SIZE;
> + memblock_add(PHYS_OFFSET, 219*SZ_1M);
> + memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE);
> }
>
> static void __init mahimahi_map_io(void)
> diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
> index 46de789..b621b23 100644
> --- a/arch/arm/mach-msm/board-msm7x30.c
> +++ b/arch/arm/mach-msm/board-msm7x30.c
> @@ -40,8 +40,7 @@
> #include "proc_comm.h"
> #include "common.h"
>
> -static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
> - struct meminfo *mi)
> +static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
> {
> for (; tag->hdr.size; tag = tag_next(tag))
> if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
> diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
> index 3276051..e509679 100644
> --- a/arch/arm/mach-msm/board-sapphire.c
> +++ b/arch/arm/mach-msm/board-sapphire.c
> @@ -35,6 +35,7 @@
>
> #include <linux/mtd/nand.h>
> #include <linux/mtd/partitions.h>
> +#include <linux/memblock.h>
>
> #include "gpio_chip.h"
> #include "board-sapphire.h"
> @@ -74,22 +75,18 @@ static struct map_desc sapphire_io_desc[] __initdata = {
> }
> };
>
> -static void __init sapphire_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init sapphire_fixup(struct tag *tags, char **cmdline)
> {
> int smi_sz = parse_tag_smi((const struct tag *)tags);
>
> - mi->nr_banks = 1;
> - mi->bank[0].start = PHYS_OFFSET;
> - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
> if (smi_sz == 32) {
> - mi->bank[0].size = (84*1024*1024);
> + memblock_add(PHYS_OFFSET, 84*SZ_1M);
> } else if (smi_sz == 64) {
> - mi->bank[0].size = (101*1024*1024);
> + memblock_add(PHYS_OFFSET, 101*SZ_1M);
> } else {
> + memblock_add(PHYS_OFFSET, 101*SZ_1M);
> /* Give a default value when not get smi size */
> smi_sz = 64;
> - mi->bank[0].size = (101*1024*1024);
> }
> }
>
> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
> index 015d544..58826cf 100644
> --- a/arch/arm/mach-msm/board-trout.c
> +++ b/arch/arm/mach-msm/board-trout.c
> @@ -19,6 +19,7 @@
> #include <linux/init.h>
> #include <linux/platform_device.h>
> #include <linux/clkdev.h>
> +#include <linux/memblock.h>
>
> #include <asm/system_info.h>
> #include <asm/mach-types.h>
> @@ -55,12 +56,9 @@ static void __init trout_init_irq(void)
> msm_init_irq();
> }
>
> -static void __init trout_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init trout_fixup(struct tag *tags, char **cmdline)
> {
> - mi->nr_banks = 1;
> - mi->bank[0].start = PHYS_OFFSET;
> - mi->bank[0].size = (101*1024*1024);
> + memblock_add(PHYS_OFFSET, 101*SZ_1M);
> }
>
> static void __init trout_init(void)
> diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
> index 3f1de11..6bbb7b5 100644
> --- a/arch/arm/mach-orion5x/common.c
> +++ b/arch/arm/mach-orion5x/common.c
> @@ -365,8 +365,7 @@ void orion5x_restart(enum reboot_mode mode, const char *cmd)
> * Many orion-based systems have buggy bootloader implementations.
> * This is a common fixup for bogus memory tags.
> */
> -void __init tag_fixup_mem32(struct tag *t, char **from,
> - struct meminfo *meminfo)
> +void __init tag_fixup_mem32(struct tag *t, char **from)
> {
> for (; t->hdr.size; t = tag_next(t))
> if (t->hdr.tag == ATAG_MEM &&
> diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
> index f565f99..175ec4c 100644
> --- a/arch/arm/mach-orion5x/common.h
> +++ b/arch/arm/mach-orion5x/common.h
> @@ -71,9 +71,8 @@ void edmini_v2_init(void);
> static inline void edmini_v2_init(void) {};
> #endif
>
> -struct meminfo;
> struct tag;
> -extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
> +extern void __init tag_fixup_mem32(struct tag *, char **);
>
> /*****************************************************************************
> * Helpers to access Orion registers
> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
> index 584439bf..4d3588d 100644
> --- a/arch/arm/mach-pxa/cm-x300.c
> +++ b/arch/arm/mach-pxa/cm-x300.c
> @@ -837,8 +837,7 @@ static void __init cm_x300_init(void)
> cm_x300_init_bl();
> }
>
> -static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
> {
> /* Make sure that mi->bank[0].start = PHYS_ADDR */
> for (; tags->hdr.size; tags = tag_next(tags))
> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
> index f162f1b..a763744 100644
> --- a/arch/arm/mach-pxa/corgi.c
> +++ b/arch/arm/mach-pxa/corgi.c
> @@ -33,6 +33,7 @@
> #include <linux/mtd/sharpsl.h>
> #include <linux/input/matrix_keypad.h>
> #include <linux/module.h>
> +#include <linux/memblock.h>
> #include <video/w100fb.h>
>
> #include <asm/setup.h>
> @@ -713,16 +714,13 @@ static void __init corgi_init(void)
> platform_add_devices(devices, ARRAY_SIZE(devices));
> }
>
> -static void __init fixup_corgi(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init fixup_corgi(struct tag *tags, char **cmdline)
> {
> sharpsl_save_param();
> - mi->nr_banks=1;
> - mi->bank[0].start = 0xa0000000;
> if (machine_is_corgi())
> - mi->bank[0].size = (32*1024*1024);
> + memblock_add(0xa0000000, SZ_32M);
> else
> - mi->bank[0].size = (64*1024*1024);
> + memblock_add(0xa0000000, SZ_64M);
> }
>
> #ifdef CONFIG_MACH_CORGI
> diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
> index 8280ebca..cfb8641 100644
> --- a/arch/arm/mach-pxa/eseries.c
> +++ b/arch/arm/mach-pxa/eseries.c
> @@ -21,6 +21,7 @@
> #include <linux/mtd/nand.h>
> #include <linux/mtd/partitions.h>
> #include <linux/usb/gpio_vbus.h>
> +#include <linux/memblock.h>
>
> #include <video/w100fb.h>
>
> @@ -41,14 +42,12 @@
> #include "clock.h"
>
> /* Only e800 has 128MB RAM */
> -void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
> +void __init eseries_fixup(struct tag *tags, char **cmdline)
> {
> - mi->nr_banks=1;
> - mi->bank[0].start = 0xa0000000;
> if (machine_is_e800())
> - mi->bank[0].size = (128*1024*1024);
> + memblock_add(0xa0000000, SZ_128M);
> else
> - mi->bank[0].size = (64*1024*1024);
> + memblock_add(0xa0000000, SZ_64M);
> }
>
> struct gpio_vbus_mach_info e7xx_udc_info = {
> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
> index aedf053..1319916 100644
> --- a/arch/arm/mach-pxa/poodle.c
> +++ b/arch/arm/mach-pxa/poodle.c
> @@ -29,6 +29,7 @@
> #include <linux/spi/ads7846.h>
> #include <linux/spi/pxa2xx_spi.h>
> #include <linux/mtd/sharpsl.h>
> +#include <linux/memblock.h>
>
> #include <mach/hardware.h>
> #include <asm/mach-types.h>
> @@ -456,13 +457,10 @@ static void __init poodle_init(void)
> poodle_init_spi();
> }
>
> -static void __init fixup_poodle(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init fixup_poodle(struct tag *tags, char **cmdline)
> {
> sharpsl_save_param();
> - mi->nr_banks=1;
> - mi->bank[0].start = 0xa0000000;
> - mi->bank[0].size = (32*1024*1024);
> + memblock_add(0xa0000000, SZ_32M);
> }
>
> MACHINE_START(POODLE, "SHARP Poodle")
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 0b11c1a..840c3a4 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -32,6 +32,7 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/reboot.h>
> +#include <linux/memblock.h>
>
> #include <asm/setup.h>
> #include <asm/mach-types.h>
> @@ -971,13 +972,10 @@ static void __init spitz_init(void)
> spitz_i2c_init();
> }
>
> -static void __init spitz_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init spitz_fixup(struct tag *tags, char **cmdline)
> {
> sharpsl_save_param();
> - mi->nr_banks = 1;
> - mi->bank[0].start = 0xa0000000;
> - mi->bank[0].size = (64*1024*1024);
> + memblock_add(0xa0000000, SZ_64M);
> }
>
> #ifdef CONFIG_MACH_SPITZ
> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
> index ef5557b..c158a6e 100644
> --- a/arch/arm/mach-pxa/tosa.c
> +++ b/arch/arm/mach-pxa/tosa.c
> @@ -37,6 +37,7 @@
> #include <linux/i2c/pxa-i2c.h>
> #include <linux/usb/gpio_vbus.h>
> #include <linux/reboot.h>
> +#include <linux/memblock.h>
>
> #include <asm/setup.h>
> #include <asm/mach-types.h>
> @@ -960,13 +961,10 @@ static void __init tosa_init(void)
> platform_add_devices(devices, ARRAY_SIZE(devices));
> }
>
> -static void __init fixup_tosa(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init fixup_tosa(struct tag *tags, char **cmdline)
> {
> sharpsl_save_param();
> - mi->nr_banks=1;
> - mi->bank[0].start = 0xa0000000;
> - mi->bank[0].size = (64*1024*1024);
> + memblock_add(0xa0000000, SZ_64M);
> }
>
> MACHINE_START(TOSA, "SHARP Tosa")
> diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
> index 1d5ee5c..c2fae3a 100644
> --- a/arch/arm/mach-realview/core.c
> +++ b/arch/arm/mach-realview/core.c
> @@ -31,6 +31,7 @@
> #include <linux/amba/mmci.h>
> #include <linux/gfp.h>
> #include <linux/mtd/physmap.h>
> +#include <linux/memblock.h>
>
> #include <mach/hardware.h>
> #include <asm/irq.h>
> @@ -370,19 +371,15 @@ void __init realview_timer_init(unsigned int timer_irq)
> /*
> * Setup the memory banks.
> */
> -void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo)
> +void realview_fixup(struct tag *tags, char **from)
> {
> /*
> * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
> * Half of this is mirrored at 0.
> */
> #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
> - meminfo->bank[0].start = 0x70000000;
> - meminfo->bank[0].size = SZ_512M;
> - meminfo->nr_banks = 1;
> + memblock_add(0x70000000, SZ_512M);
> #else
> - meminfo->bank[0].start = 0;
> - meminfo->bank[0].size = SZ_256M;
> - meminfo->nr_banks = 1;
> + memblock_add(0, SZ_256M);
> #endif
> }
> diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
> index 602ca5e..844946d 100644
> --- a/arch/arm/mach-realview/core.h
> +++ b/arch/arm/mach-realview/core.h
> @@ -51,8 +51,7 @@ extern int realview_flash_register(struct resource *res, u32 num);
> extern int realview_eth_register(const char *name, struct resource *res);
> extern int realview_usb_register(struct resource *res);
> extern void realview_init_early(void);
> -extern void realview_fixup(struct tag *tags, char **from,
> - struct meminfo *meminfo);
> +extern void realview_fixup(struct tag *tags, char **from);
>
> extern struct smp_operations realview_smp_ops;
> extern void realview_cpu_die(unsigned int cpu);
> diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
> index c5eade7..6abf6a0 100644
> --- a/arch/arm/mach-realview/realview_pb1176.c
> +++ b/arch/arm/mach-realview/realview_pb1176.c
> @@ -32,6 +32,7 @@
> #include <linux/irqchip/arm-gic.h>
> #include <linux/platform_data/clk-realview.h>
> #include <linux/reboot.h>
> +#include <linux/memblock.h>
>
> #include <mach/hardware.h>
> #include <asm/irq.h>
> @@ -339,15 +340,12 @@ static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
> dsb();
> }
>
> -static void realview_pb1176_fixup(struct tag *tags, char **from,
> - struct meminfo *meminfo)
> +static void realview_pb1176_fixup(struct tag *tags, char **from)
> {
> /*
> * RealView PB1176 only has 128MB of RAM mapped at 0.
> */
> - meminfo->bank[0].start = 0;
> - meminfo->bank[0].size = SZ_128M;
> - meminfo->nr_banks = 1;
> + memblock_add(0, SZ_128M);
> }
>
> static void __init realview_pb1176_init(void)
> diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
> index 9d75493..60d322a 100644
> --- a/arch/arm/mach-realview/realview_pbx.c
> +++ b/arch/arm/mach-realview/realview_pbx.c
> @@ -29,6 +29,7 @@
> #include <linux/irqchip/arm-gic.h>
> #include <linux/platform_data/clk-realview.h>
> #include <linux/reboot.h>
> +#include <linux/memblock.h>
>
> #include <asm/irq.h>
> #include <asm/mach-types.h>
> @@ -325,23 +326,19 @@ static void __init realview_pbx_timer_init(void)
> realview_pbx_twd_init();
> }
>
> -static void realview_pbx_fixup(struct tag *tags, char **from,
> - struct meminfo *meminfo)
> +static void realview_pbx_fixup(struct tag *tags, char **from)
> {
> #ifdef CONFIG_SPARSEMEM
> /*
> * Memory configuration with SPARSEMEM enabled on RealView PBX (see
> * asm/mach/memory.h for more information).
> */
> - meminfo->bank[0].start = 0;
> - meminfo->bank[0].size = SZ_256M;
> - meminfo->bank[1].start = 0x20000000;
> - meminfo->bank[1].size = SZ_512M;
> - meminfo->bank[2].start = 0x80000000;
> - meminfo->bank[2].size = SZ_256M;
> - meminfo->nr_banks = 3;
> +
> + memblock_add(0, SZ_256M);
> + memblock_add(0x20000000, SZ_512M);
> + memblock_add(0x80000000, SZ_256M);
> #else
> - realview_fixup(tags, from, meminfo);
> + realview_fixup(tags, from);
> #endif
> }
>
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
> index f5bc721..0551758 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
> @@ -21,6 +21,7 @@
> #include <linux/serial_core.h>
> #include <linux/platform_device.h>
> #include <linux/io.h>
> +#include <linux/memblock.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
> @@ -93,13 +94,10 @@ static struct platform_device *smdk2413_devices[] __initdata = {
> &s3c2412_device_dma,
> };
>
> -static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
> {
> if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
> - mi->nr_banks=1;
> - mi->bank[0].start = 0x30000000;
> - mi->bank[0].size = SZ_64M;
> + memblock_add(0x30000000, SZ_64M);
> }
> }
>
> diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
> index f7ec9c5..aa550f5 100644
> --- a/arch/arm/mach-s3c24xx/mach-vstms.c
> +++ b/arch/arm/mach-s3c24xx/mach-vstms.c
> @@ -22,6 +22,7 @@
> #include <linux/mtd/nand.h>
> #include <linux/mtd/nand_ecc.h>
> #include <linux/mtd/partitions.h>
> +#include <linux/memblock.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
> @@ -129,13 +130,10 @@ static struct platform_device *vstms_devices[] __initdata = {
> &s3c2412_device_dma,
> };
>
> -static void __init vstms_fixup(struct tag *tags, char **cmdline,
> - struct meminfo *mi)
> +static void __init vstms_fixup(struct tag *tags, char **cmdline)
> {
> if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
> - mi->nr_banks=1;
> - mi->bank[0].start = 0x30000000;
> - mi->bank[0].size = SZ_64M;
> + memblock_add(0x30000000, SZ_64M);
> }
> }
>
> diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
> index 8443a27..7dd894e 100644
> --- a/arch/arm/mach-sa1100/assabet.c
> +++ b/arch/arm/mach-sa1100/assabet.c
> @@ -531,7 +531,7 @@ static void __init get_assabet_scr(void)
> }
>
> static void __init
> -fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi)
> +fixup_assabet(struct tag *tags, char **cmdline)
> {
> /* This must be done before any call to machine_has_neponset() */
> map_sa1100_gpio_regs();
> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
> index 42fc139..a62dadd 100644
> --- a/arch/arm/mm/init.c
> +++ b/arch/arm/mm/init.c
> @@ -81,24 +81,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2);
> * initialization functions, as well as show_mem() for the skipping
> * of holes in the memory map. It is populated by arm_add_memory().
> */
> -struct meminfo meminfo;
> -
> void show_mem(unsigned int filter)
> {
> int free = 0, total = 0, reserved = 0;
> - int shared = 0, cached = 0, slab = 0, i;
> - struct meminfo * mi = &meminfo;
> + int shared = 0, cached = 0, slab = 0;
> + struct memblock_region *reg;
>
> printk("Mem-info:\n");
> show_free_areas(filter);
>
> - for_each_bank (i, mi) {
> - struct membank *bank = &mi->bank[i];
> + for_each_memblock (memory, reg) {
> unsigned int pfn1, pfn2;
> struct page *page, *end;
>
> - pfn1 = bank_pfn_start(bank);
> - pfn2 = bank_pfn_end(bank);
> + pfn1 = memblock_region_memory_base_pfn(reg);
> + pfn2 = memblock_region_memory_end_pfn(reg);
>
> page = pfn_to_page(pfn1);
> end = pfn_to_page(pfn2 - 1) + 1;
> @@ -130,16 +127,9 @@ void show_mem(unsigned int filter)
> static void __init find_limits(unsigned long *min, unsigned long *max_low,
> unsigned long *max_high)
> {
> - struct meminfo *mi = &meminfo;
> - int i;
> -
> - /* This assumes the meminfo array is properly sorted */
> - *min = bank_pfn_start(&mi->bank[0]);
> - for_each_bank (i, mi)
> - if (mi->bank[i].highmem)
> - break;
> - *max_low = bank_pfn_end(&mi->bank[i - 1]);
> - *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
> + *max_low = PFN_DOWN(memblock_get_current_limit());
> + *min = PFN_UP(memblock_start_of_DRAM());
> + *max_high = PFN_DOWN(memblock_end_of_DRAM());
> }
>
> #ifdef CONFIG_ZONE_DMA
> @@ -275,14 +265,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
> return phys;
> }
>
> -void __init arm_memblock_init(struct meminfo *mi,
> - const struct machine_desc *mdesc)
> +void __init arm_memblock_init(const struct machine_desc *mdesc)
> {
> - int i;
> -
> - for (i = 0; i < mi->nr_banks; i++)
> - memblock_add(mi->bank[i].start, mi->bank[i].size);
> -
> /* Register the kernel text, kernel data and initrd with memblock. */
> #ifdef CONFIG_XIP_KERNEL
> memblock_reserve(__pa(_sdata), _end - _sdata);
> @@ -413,54 +397,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
> /*
> * The mem_map array can get very big. Free the unused area of the memory map.
> */
> -static void __init free_unused_memmap(struct meminfo *mi)
> +static void __init free_unused_memmap(void)
> {
> - unsigned long bank_start, prev_bank_end = 0;
> - unsigned int i;
> + unsigned long start, prev_end = 0;
> + struct memblock_region *reg;
>
> /*
> * This relies on each bank being in address order.
> * The banks are sorted previously in bootmem_init().
> */
> - for_each_bank(i, mi) {
> - struct membank *bank = &mi->bank[i];
> -
> - bank_start = bank_pfn_start(bank);
> + for_each_memblock(memory, reg) {
> + start = __phys_to_pfn(reg->base);
>
> #ifdef CONFIG_SPARSEMEM
> /*
> * Take care not to free memmap entries that don't exist
> * due to SPARSEMEM sections which aren't present.
> */
> - bank_start = min(bank_start,
> - ALIGN(prev_bank_end, PAGES_PER_SECTION));
> + start = min(start,
> + ALIGN(prev_end, PAGES_PER_SECTION));
> #else
> /*
> * Align down here since the VM subsystem insists that the
> * memmap entries are valid from the bank start aligned to
> * MAX_ORDER_NR_PAGES.
> */
> - bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
> + start = round_down(start, MAX_ORDER_NR_PAGES);
> #endif
> /*
> * If we had a previous bank, and there is a space
> * between the current bank and the previous, free it.
> */
> - if (prev_bank_end && prev_bank_end < bank_start)
> - free_memmap(prev_bank_end, bank_start);
> + if (prev_end && prev_end < start)
> + free_memmap(prev_end, start);
>
> /*
> * Align up here since the VM subsystem insists that the
> * memmap entries are valid from the bank end aligned to
> * MAX_ORDER_NR_PAGES.
> */
> - prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
> + prev_end = ALIGN(start + __phys_to_pfn(reg->size),
> + MAX_ORDER_NR_PAGES);
> }
>
> #ifdef CONFIG_SPARSEMEM
> - if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
> - free_memmap(prev_bank_end,
> - ALIGN(prev_bank_end, PAGES_PER_SECTION));
> + if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
> + free_memmap(prev_end,
> + ALIGN(prev_end, PAGES_PER_SECTION));
> #endif
> }
>
> @@ -536,7 +519,7 @@ void __init mem_init(void)
> set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
>
> /* this will put all unused low memory onto the freelists */
> - free_unused_memmap(&meminfo);
> + free_unused_memmap();
> free_all_bootmem();
>
> #ifdef CONFIG_SA1111
> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> index 4f08c13..23433ef 100644
> --- a/arch/arm/mm/mmu.c
> +++ b/arch/arm/mm/mmu.c
> @@ -1046,74 +1046,44 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
> void __init sanity_check_meminfo(void)
> {
> phys_addr_t memblock_limit = 0;
> - int i, j, highmem = 0;
> + int highmem = 0;
> phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
> + struct memblock_region *reg;
>
> - for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
> - struct membank *bank = &meminfo.bank[j];
> - phys_addr_t size_limit;
> -
> - *bank = meminfo.bank[i];
> - size_limit = bank->size;
> + for_each_memblock(memory, reg) {
> + phys_addr_t block_start = reg->base;
> + phys_addr_t block_end = reg->base + reg->size;
> + phys_addr_t size_limit = reg->size;
>
> - if (bank->start >= vmalloc_limit)
> + if (reg->base >= vmalloc_limit)
> highmem = 1;
> else
> - size_limit = vmalloc_limit - bank->start;
> + size_limit = vmalloc_limit - reg->base;
>
> - bank->highmem = highmem;
>
> -#ifdef CONFIG_HIGHMEM
> - /*
> - * Split those memory banks which are partially overlapping
> - * the vmalloc area greatly simplifying things later.
> - */
> - if (!highmem && bank->size > size_limit) {
> - if (meminfo.nr_banks >= NR_BANKS) {
> - printk(KERN_CRIT "NR_BANKS too low, "
> - "ignoring high memory\n");
> - } else {
> - memmove(bank + 1, bank,
> - (meminfo.nr_banks - i) * sizeof(*bank));
> - meminfo.nr_banks++;
> - i++;
> - bank[1].size -= size_limit;
> - bank[1].start = vmalloc_limit;
> - bank[1].highmem = highmem = 1;
> - j++;
> + if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
> +
> + if (highmem) {
> + pr_notice("Ignoring ram at %pa-%pa (!CONFIG_HIGHMEM)\n",
> + &block_start, &block_end);
> + memblock_remove(block_start, block_end);
> + continue;
> }
> - bank->size = size_limit;
> - }
> -#else
> - /*
> - * Highmem banks not allowed with !CONFIG_HIGHMEM.
> - */
> - if (highmem) {
> - printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
> - "(!CONFIG_HIGHMEM).\n",
> - (unsigned long long)bank->start,
> - (unsigned long long)bank->start + bank->size - 1);
> - continue;
> - }
>
> - /*
> - * Check whether this memory bank would partially overlap
> - * the vmalloc area.
> - */
> - if (bank->size > size_limit) {
> - printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
> - "to -%.8llx (vmalloc region overlap).\n",
> - (unsigned long long)bank->start,
> - (unsigned long long)bank->start + bank->size - 1,
> - (unsigned long long)bank->start + size_limit - 1);
> - bank->size = size_limit;
> + if (reg->size > size_limit) {
> + phys_addr_t overlap_size = reg->size - size_limit;
> +
> + pr_notice("Truncating RAM at %pa-%pa to -%pa",
> + &block_start, &block_end, &overlap_size);
> + memblock_remove(vmalloc_limit, overlap_size);
> + block_end = vmalloc_limit;
> + }
> }
> -#endif
> - if (!bank->highmem) {
> - phys_addr_t bank_end = bank->start + bank->size;
>
> - if (bank_end > arm_lowmem_limit)
> - arm_lowmem_limit = bank_end;
> + if (!highmem) {
> + if (block_end > arm_lowmem_limit)
> + arm_lowmem_limit = reg->base + size_limit;
> +
>
> /*
> * Find the first non-section-aligned page, and point
> @@ -1129,35 +1099,16 @@ void __init sanity_check_meminfo(void)
> * occurs before any free memory is mapped.
> */
> if (!memblock_limit) {
> - if (!IS_ALIGNED(bank->start, SECTION_SIZE))
> - memblock_limit = bank->start;
> - else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
> - memblock_limit = bank_end;
> + if (!IS_ALIGNED(block_start, SECTION_SIZE))
> + memblock_limit = block_start;
> + else if (!IS_ALIGNED(block_end, SECTION_SIZE))
> + memblock_limit = block_end;
> }
> - }
> - j++;
> - }
> -#ifdef CONFIG_HIGHMEM
> - if (highmem) {
> - const char *reason = NULL;
>
> - if (cache_is_vipt_aliasing()) {
> - /*
> - * Interactions between kmap and other mappings
> - * make highmem support with aliasing VIPT caches
> - * rather difficult.
> - */
> - reason = "with VIPT aliasing cache";
> - }
> - if (reason) {
> - printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
> - reason);
> - while (j > 0 && meminfo.bank[j - 1].highmem)
> - j--;
> }
> +
> }
> -#endif
> - meminfo.nr_banks = j;
> +
> high_memory = __va(arm_lowmem_limit - 1) + 1;
>
> /*
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists