[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140212092108.GT15081@lee--X1>
Date: Wed, 12 Feb 2014 09:21:08 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: Sangbeom Kim <sbkim73@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>
Subject: Re: [PATCH 11/14] regulator: s2mps11: Add opmode for S2MPS14
regulators
> S2MPS11/S2MPS14 regulators support different modes of operation:
> - Always off;
> - On/Off controlled by pin/GPIO (PWREN/LDOEN/EMMCEN);
> - Always on;
> This is very similar to S5M8767 regulator driver which also supports
> opmodes (although S5M8767 have also low-power mode).
>
> This patch adds parsing the operation mode from DTS by reading a
> "op_mode" property from regulator child node.
>
> The op_mode is then used for enabling the S2MPS14 regulators.
> On S2MPS11 the DTS "op_mode" property is parsed but not used for
> enabling, as this was not tested.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> Cc: Mark Brown <broonie@...nel.org>
> Cc: Liam Girdwood <lgirdwood@...il.com>
> ---
> drivers/regulator/s2mps11.c | 98 ++++++++++++++++++++++++++++++++++-
> include/linux/mfd/samsung/s2mps14.h | 17 ++++++
> 2 files changed, 114 insertions(+), 1 deletion(-)
<snip>
> diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h
> index c4bfb8edc836..69582ae4c971 100644
> --- a/include/linux/mfd/samsung/s2mps14.h
> +++ b/include/linux/mfd/samsung/s2mps14.h
> @@ -149,4 +149,21 @@ enum s2mps14_regulators {
> #define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1)
> #define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1)
>
> +#define S2MPS14_ENCTRL_SHIFT 6
> +#define S2MPS14_ENCTRL_MASK (0x3 << S2MPS14_ENCTRL_SHIFT)
> +
> +/*
> + * Values of regulator operation modes match device tree bindings.
> + */
> +enum s2mps14_regulator_opmode {
> + S2MPS14_REGULATOR_OPMODE_OFF = 0,
> + S2MPS14_REGULATOR_OPMODE_ON = 1,
> + /* Reserved for compatibility with S5M8767 where this
> + * is a low power mode. */
Sorry to be an arse, but can you use proper multi-line comments
please?
The preferred style for long (multi-line) comments is:
/*
* This is the preferred style for multi-line
* comments in the Linux kernel source code.
* Please use it consistently.
*
* Description: A column of asterisks on the left side,
* with beginning and ending almost-blank lines.
*/
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists