linux-kernel - Re: [PATCH 11/14] regulator: s2mps11: Add opmode for S2MPS14 regulators

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 12 Feb 2014 11:05:36 +0100
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Lee Jones <lee.jones@...aro.org>
Cc:	Sangbeom Kim <sbkim73@...sung.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
	Kyungmin Park <kyungmin.park@...sung.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
	Chanwoo Choi <cw00.choi@...sung.com>,
	Mark Brown <broonie@...nel.org>,
	Liam Girdwood <lgirdwood@...il.com>
Subject: Re: [PATCH 11/14] regulator: s2mps11: Add opmode for S2MPS14 regulators

On Wed, 2014-02-12 at 09:21 +0000, Lee Jones wrote:
> > S2MPS11/S2MPS14 regulators support different modes of operation:
> >  - Always off;
> >  - On/Off controlled by pin/GPIO (PWREN/LDOEN/EMMCEN);
> >  - Always on;
> > This is very similar to S5M8767 regulator driver which also supports
> > opmodes (although S5M8767 have also low-power mode).
> > 
> > This patch adds parsing the operation mode from DTS by reading a
> > "op_mode" property from regulator child node.
> > 
> > The op_mode is then used for enabling the S2MPS14 regulators.
> > On S2MPS11 the DTS "op_mode" property is parsed but not used for
> > enabling, as this was not tested.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> > Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> > Cc: Mark Brown <broonie@...nel.org>
> > Cc: Liam Girdwood <lgirdwood@...il.com>
> > ---
> >  drivers/regulator/s2mps11.c         |   98 ++++++++++++++++++++++++++++++++++-
> >  include/linux/mfd/samsung/s2mps14.h |   17 ++++++
> >  2 files changed, 114 insertions(+), 1 deletion(-)
> 
> <snip>
> 
> > diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h
> > index c4bfb8edc836..69582ae4c971 100644
> > --- a/include/linux/mfd/samsung/s2mps14.h
> > +++ b/include/linux/mfd/samsung/s2mps14.h
> > @@ -149,4 +149,21 @@ enum s2mps14_regulators {
> >  #define S2MPS14_LDO_N_VOLTAGES	(S2MPS14_LDO_VSEL_MASK + 1)
> >  #define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1)
> >  
> > +#define S2MPS14_ENCTRL_SHIFT		6
> > +#define S2MPS14_ENCTRL_MASK		(0x3 << S2MPS14_ENCTRL_SHIFT)
> > +
> > +/*
> > + * Values of regulator operation modes match device tree bindings.
> > + */
> > +enum s2mps14_regulator_opmode {
> > +	S2MPS14_REGULATOR_OPMODE_OFF		= 0,
> > +	S2MPS14_REGULATOR_OPMODE_ON		= 1,
> > +	/* Reserved for compatibility with S5M8767 where this
> > +	 * is a low power mode. */
> 
> Sorry to be an arse, but can you use proper multi-line comments
> please?
> 
> The preferred style for long (multi-line) comments is:
> 
>         /*
>          * This is the preferred style for multi-line
>          * comments in the Linux kernel source code.
>          * Please use it consistently.
>          *
>          * Description:  A column of asterisks on the left side,
>          * with beginning and ending almost-blank lines.
>          */

No problem, I'll fix it. The preferred comment in such case had 4 lines
instead of 2 so it looked a little weird to me :).


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/