[18838.174648] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[18838.177261] PM: Syncing filesystems ... done.
[18838.377233] PM: Preparing system for mem sleep
[18838.377483] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18838.378873] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18838.379915] PM: Entering mem sleep
[18838.379960] Suspending console(s) (use no_console_suspend to debug)
[18838.380199] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[18838.414178] cfg80211: Calling CRDA to update world regulatory domain
[18838.414236] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[18838.415584] sd 1:0:0:0: [sda] Stopping disk
[18838.471781] mei_me 0000:00:16.0: suspend
[18839.580931] PM: suspend of devices complete after 1199.770 msecs
[18839.581088] PM: late suspend of devices complete after 0.154 msecs
[18839.594472] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18839.620980] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[18839.634590] PM: noirq suspend of devices complete after 53.457 msecs
[18839.634881] ACPI: Preparing to enter system sleep state S3
[18839.635177] PM: Saving platform NVS memory
[18839.635786] Disabling non-boot CPUs ...
[18839.737661] smpboot: CPU 1 is now offline
[18839.841078] smpboot: CPU 2 is now offline
[18839.944493] smpboot: CPU 3 is now offline
[18839.947640] ACPI: Low-level resume complete
[18839.947785] PM: Restoring platform NVS memory
[18839.948681] Enabling non-boot CPUs ...
[18839.948752] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18839.964210] Intel pstate controlling: cpu 1
[18839.964290] CPU1 is up
[18839.964320] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18839.979175] Intel pstate controlling: cpu 2
[18839.979233] CPU2 is up
[18839.979256] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18839.993887] Intel pstate controlling: cpu 3
[18839.993933] CPU3 is up
[18839.999479] ACPI: Waking up from system sleep state S3
[18840.041832] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[18840.081869] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18840.108647] PM: noirq resume of devices complete after 104.653 msecs
[18840.108770] PM: early resume of devices complete after 0.107 msecs
[18840.108790] i915 0000:00:02.0: setting latency timer to 64
[18840.108877] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[18840.111434] xhci_hcd 0000:00:14.0: setting latency timer to 64
[18840.111538] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[18840.111855] ahci 0000:00:1f.2: setting latency timer to 64
[18840.111922] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[18840.111955] ehci-pci 0000:00:1d.0: setting latency timer to 64
[18840.119497] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[18840.119498] PM: Device 00:06 failed to resume: error -19
[18840.445439] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18840.446423] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18840.446770] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18840.452336] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18840.452674] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18840.452755] ata2.00: configured for UDMA/133
[18840.478843] sd 1:0:0:0: [sda] Starting disk
[18840.525678] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[18840.539696] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[18840.539697] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[18840.539698] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[18840.539698] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[18840.539699] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[18840.540343] btusb 1-4:1.0: no reset_resume for driver btusb?
[18840.540344] btusb 1-4:1.1: no reset_resume for driver btusb?
[18840.699071] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[18840.718129] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[18840.872553] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[18840.887276] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[18840.887277] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[18840.887283] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[18840.887285] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[18840.904879] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18840.905019] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18841.046082] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[18841.059851] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[18841.059853] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[18841.059858] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[18841.065026] PM: resume of devices complete after 955.482 msecs
[18841.065664] PM: Finishing wakeup.
[18841.065688] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18841.066618] pci_bus 0000:01: Allocating resources
[18841.066635] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18841.066645] pci 0000:00:00.0: no hotplug settings from platform
[18841.066647] pci 0000:00:00.0: using default PCI settings
[18841.066652] i915 0000:00:02.0: no hotplug settings from platform
[18841.066654] i915 0000:00:02.0: using default PCI settings
[18841.066659] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18841.066662] pci 0000:00:04.0: no hotplug settings from platform
[18841.066664] pci 0000:00:04.0: using default PCI settings
[18841.066669] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18841.066670] xhci_hcd 0000:00:14.0: using default PCI settings
[18841.066676] mei_me 0000:00:16.0: no hotplug settings from platform
[18841.066678] mei_me 0000:00:16.0: using default PCI settings
[18841.066685] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18841.066688] pcieport 0000:00:1c.0: no hotplug settings from platform
[18841.066697] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18841.066700] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18841.066701] ehci-pci 0000:00:1d.0: using default PCI settings
[18841.066709] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18841.066711] lpc_ich 0000:00:1f.0: using default PCI settings
[18841.066721] ahci 0000:00:1f.2: no hotplug settings from platform
[18841.066722] ahci 0000:00:1f.2: using default PCI settings
[18841.066729] pci 0000:00:1f.3: no hotplug settings from platform
[18841.066730] pci 0000:00:1f.3: using default PCI settings
[18841.066737] pci 0000:00:1f.6: no hotplug settings from platform
[18841.066738] pci 0000:00:1f.6: using default PCI settings
[18841.067792] pci_bus 0000:01: Allocating resources
[18841.067807] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18841.067816] pci 0000:00:00.0: no hotplug settings from platform
[18841.067818] pci 0000:00:00.0: using default PCI settings
[18841.067823] i915 0000:00:02.0: no hotplug settings from platform
[18841.067825] i915 0000:00:02.0: using default PCI settings
[18841.067831] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18841.067834] pci 0000:00:04.0: no hotplug settings from platform
[18841.067835] pci 0000:00:04.0: using default PCI settings
[18841.067840] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18841.067842] xhci_hcd 0000:00:14.0: using default PCI settings
[18841.067849] mei_me 0000:00:16.0: no hotplug settings from platform
[18841.067850] mei_me 0000:00:16.0: using default PCI settings
[18841.067857] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18841.067861] pcieport 0000:00:1c.0: no hotplug settings from platform
[18841.067869] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18841.067873] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18841.067875] ehci-pci 0000:00:1d.0: using default PCI settings
[18841.067883] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18841.067885] lpc_ich 0000:00:1f.0: using default PCI settings
[18841.067894] ahci 0000:00:1f.2: no hotplug settings from platform
[18841.067895] ahci 0000:00:1f.2: using default PCI settings
[18841.067902] pci 0000:00:1f.3: no hotplug settings from platform
[18841.067903] pci 0000:00:1f.3: using default PCI settings
[18841.067910] pci 0000:00:1f.6: no hotplug settings from platform
[18841.067911] pci 0000:00:1f.6: using default PCI settings
[18841.065665] Restarting tasks ... done.
[18841.069534] video LNXVIDEO:00: Restoring backlight state
[18841.077858] Bluetooth: hci0: read Intel version: 370710018002030d00
[18841.077865] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[18841.186986] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[18841.626406] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[18844.670642] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[18844.671641] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[18844.678431] wlp1s0: authenticated
[18844.678857] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[18844.683185] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[18844.684493] wlp1s0: associated
[18866.841316] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root