| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAfyv37FOA8spxCbxLra+sn8BJFh2dsnMTU4NU8LUKteFdzsBA@mail.gmail.com>
Date: Wed, 12 Feb 2014 23:30:15 +0100
From: Belisko Marek <marek.belisko@...il.com>
To: Tomi Valkeinen <tomi.valkeinen@...com>
Cc: Christoph Fritz <chf.fritz@...glemail.com>,
Tero Kristo <t-kristo@...com>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, pali.rohar@...il.com,
Pavel Machek <pavel@....cz>, Nishanth Menon <nm@...com>
Subject: Re: OMAP: clock DT conversion issues with omap36xx
Hi Tomi,
On Wed, Feb 12, 2014 at 2:18 PM, Tomi Valkeinen <tomi.valkeinen@...com> wrote:
> Hi Tero, Christoph,
>
> On 07/02/14 12:12, Christoph Fritz wrote:
>> On Tue, 2014-02-04 at 17:50 +0200, Tero Kristo wrote:
>>> On 01/29/2014 01:21 PM, Christoph Fritz wrote:
>>>>> Currently I only analyzed sys_clkout2 (see attachments for full
>>>>> clk_summary files):
>>>>>
>>>>> clk_summary__next-20140115__works_as_expected:
>>>>> dpll4_m2_ck 1 1 96000000
>>>>> dpll4_m2x2_ck 1 1 96000000
>>>>> omap_192m_alwon_fck 1 1 96000000
>>>>> omap_96m_alwon_fck 1 2 96000000
>>>>> per_96m_fck 0 6 96000000
>>>>> mcbsp4_fck 0 1 96000000
>>>>> mcbsp3_fck 0 2 96000000
>>>>> mcbsp2_fck 0 2 96000000
>>>>> cm_96m_fck 2 3 96000000
>>>>> clkout2_src_ck 1 1 96000000
>>>>> sys_clkout2 1 1 24000000
>>>>>
>>>>> For real, on pin sys_clkout2 are correctly 24 Mhz measured.
>>>>>
>>>>> clk_summary__next-20140124__sysclkout2_dss_fails:
>>>>> dpll4_m2_ck 1 1 96000000
>>>>> dpll4_m2x2_mul_ck 1 1 192000000
>>>>> dpll4_m2x2_ck 1 1 192000000
>>>>> omap_192m_alwon_fck 0 0 192000000
>>>>> omap_96m_alwon_fck 1 2 192000000
>>>>> per_96m_fck 0 6 192000000
>>>>> mcbsp4_fck 0 1 192000000
>>>>> mcbsp3_fck 0 2 192000000
>>>>> mcbsp2_fck 0 2 192000000
>>>>> cm_96m_fck 2 3 192000000
>>>>> clkout2_src_ck 1 1 192000000
>>>>> sys_clkout2 1 1 24000000
>>>>>
>>>>> For real, on pin sys_clkout2 are only ~12 Mhz measured.
>>>
>>> Hey Christoph,
>>>
>>> I had a chance to look at this in more detail, and it looks like your
>>> patch above was almost the correct one (except that I think you modified
>>> wrong property and also modified the clock node for all omap3 variants.)
>>> Can you give this one a shot? Can you also send me the clk-summary dump
>>> with this patch (with the relevant nodes)?
>>
>> dpll4_m2_ck 1 1 96000000 0
>> dpll4_m2x2_mul_ck 1 1 192000000 0
>> dpll4_m2x2_ck 1 1 192000000 0
>> omap_192m_alwon_fck 0 0 192000000 0
>> omap_96m_alwon_fck 1 2 96000000 0
>> per_96m_fck 0 6 96000000 0
>> mcbsp4_fck 0 1 96000000 0
>> mcbsp3_fck 0 2 96000000 0
>> mcbsp2_fck 0 2 96000000 0
>> cm_96m_fck 2 3 96000000 0
>> clkout2_src_ck 1 1 96000000 0
>> sys_clkout2 1 1 24000000 0
>>
>> Yes, your patch fixes the issues for sys_clkout2. Thanks! If you want,
>> you can add my:
>> Tested-by: Christoph Fritz <chf.fritz@...glemail.com>
>>
>> Below is my clock fix for dss:
>>
>> From b90a62128068e1b6b0ba2a11c5cc0c8e587cf301 Mon Sep 17 00:00:00 2001
>> From: Christoph Fritz <chf.fritz@...glemail.com>
>> Date: Fri, 7 Feb 2014 10:51:15 +0100
>> Subject: [PATCH] ARM: dts: omap36xx: fix dpll4_m4_ck tree
>
> Ookay, I finally got Beagle xM working with DSS DT. So, to summarize the
> problem: DPLL4 on omap3630 is a Type B DPLL. Type B DPLL does not have
> x2 multiplier like other DPLLs. Afaik, DPLL4 on 3630 is the only Type B
> DPLL on OMAP3 SoCs.
>
> Tero's patch fixed 96m clock, which comes from dpll4_m2, by adding an
> extra /2 divider to that clock path. So the 96m clock first gets
> mutiplied by 2, even though the HW doesn't do that, and then divided by
> 2, even though the HW doesn't do that.
>
> Christoph's patch fixes DSS fclk, which comes from dpll4_m4, by skipping
> the x2 clock nodes totally, which is much better. However, it leaves the
> old x2 clock nodes there, and when dpll4_m4 clock rate changes (as it
> does when omapdss sets the fclk), the unused x2 clocks do recalcs,
> breaking everything. This last bit is a bit guesswork, I didn't actually
> verify it, but the fact is that if I remove the x2 clocks totally,
> omapdss work fine.
>
> Sooo... What should be done is create new DPLL4 clock paths for
> OMAP3630, which do not have the x2 clocks at all. I tried to do that,
> but it wasn't trivial (at least to me who is not so familiar with the
> clock data in DT).
>
> However, I hacked together the patch below, which "fixes" the issue for
> 96m and dss fclk. It sets the clock parents so that the x2 clocks are
> skipped, and makes the x2 clock nodes compatible with "unused", making
> them effectively disappear. I only verified dss fclk, so Christoph, can
> you verify the 96m clock?
With below hack dss v3 (rebased on top 3.14-rc2) works (without it
fails to probe).
>
> Tomi
>
> From ab29f9a3a43d95cdf06421bd9f29c4d7418f37de Mon Sep 17 00:00:00 2001
> From: Tomi Valkeinen <tomi.valkeinen@...com>
> Date: Wed, 12 Feb 2014 15:07:03 +0200
> Subject: [PATCH] HACK: OMAP3630: fix for 96m and dss fclks
>
> ---
> arch/arm/boot/dts/omap36xx-clocks.dtsi | 26 ++++++++++++++++++++++++++
> arch/arm/boot/dts/omap36xx.dtsi | 2 +-
> 2 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi
> b/arch/arm/boot/dts/omap36xx-clocks.dtsi
> index 2fcf253b677c..9fe91ebf41fd 100644
> --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
> @@ -70,6 +70,32 @@
> };
> };
>
> +/* HACK to skip x2 multiplier for 96m clock */
> +&omap_96m_alwon_fck {
> + clocks = <&dpll4_m2_ck>;
> +};
> +
> +&dpll4_m2x2_mul_ck {
> + compatible = "unused";
> +};
> +
> +&dpll4_m2x2_ck {
> + compatible = "unused";
> +};
> +
> +/* HACK to skip x2 multiplier for dss clock */
> +&dss1_alwon_fck_3430es2 {
> + clocks = <&dpll4_m4_ck>;
> +};
> +
> +&dpll4_m4x2_mul_ck {
> + compatible = "unused";
> +};
> +
> +&dpll4_m4x2_ck {
> + compatible = "unused";
> +};
> +
> &cm_clockdomains {
> dpll4_clkdm: dpll4_clkdm {
> compatible = "ti,clockdomain";
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi
> b/arch/arm/boot/dts/omap36xx.dtsi
> index 7e8dee9175d6..5e1bcd06a996 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -52,7 +52,7 @@
> };
> };
>
> -/include/ "omap36xx-clocks.dtsi"
> /include/ "omap34xx-omap36xx-clocks.dtsi"
> /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
> /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
> +/include/ "omap36xx-clocks.dtsi"
> --
> 1.8.3.2
>
>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists