| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1392282847-25444-14-git-send-email-k.kozlowski@samsung.com>
Date: Thu, 13 Feb 2014 10:14:06 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Sangbeom Kim <sbkim73@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
rtc-linux@...glegroups.com
Subject: [PATCH v2 13/14] rtc: s5m: Support different register layout
This patch prepares for adding support for S2MPS14 RTC device to the
rtc-s5m driver:
1. Adds a map of registers used by the driver which differ between
the chipsets (S5M876X and S2MPS14).
2. Moves code of checking for alarm pending to separate function.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: Alessandro Zummo <a.zummo@...ertech.it>
Cc: rtc-linux@...glegroups.com
---
drivers/rtc/rtc-s5m.c | 157 ++++++++++++++++++++++++++++++++++---------------
1 file changed, 109 insertions(+), 48 deletions(-)
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index b1627e9ab8f0..6a1290f8709a 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* Copyright (C) 2013 Google, Inc
@@ -38,6 +38,42 @@
*/
#define UDR_READ_RETRY_CNT 5
+/* Registers used by the driver which are different between chipsets. */
+struct s5m_rtc_reg_config {
+ /* Number of registers used for setting time/alarm0/alarm1 */
+ unsigned int regs_count;
+ /* First register for time, seconds */
+ unsigned int time;
+ /* RTC control register */
+ unsigned int ctrl;
+ /* First register for alarm 0, seconds */
+ unsigned int alarm0;
+ /* First register for alarm 1, seconds */
+ unsigned int alarm1;
+ /* SMPL/WTSR register */
+ unsigned int smpl_wtsr;
+ /*
+ * Register for update flag (UDR). Typically setting UDR field to 1
+ * will enable update of time or alarm register. Then it will be
+ * auto-cleared after successful update.
+ */
+ unsigned int rtc_udr_update;
+ /* Mask for UDR field in 'rtc_udr_update' register */
+ unsigned int rtc_udr_mask;
+};
+
+/* Register map for S5M8763 and S5M8767 */
+static const struct s5m_rtc_reg_config s5m_rtc_regs = {
+ .regs_count = 8,
+ .time = S5M_RTC_SEC,
+ .ctrl = S5M_ALARM1_CONF,
+ .alarm0 = S5M_ALARM0_SEC,
+ .alarm1 = S5M_ALARM1_SEC,
+ .smpl_wtsr = S5M_WTSR_SMPL_CNTL,
+ .rtc_udr_update = S5M_RTC_UDR_CON,
+ .rtc_udr_mask = S5M_RTC_UDR_MASK,
+};
+
struct s5m_rtc_info {
struct device *dev;
struct sec_pmic_dev *s5m87xx;
@@ -47,6 +83,7 @@ struct s5m_rtc_info {
int device_type;
int rtc_24hr_mode;
bool wtsr_smpl;
+ const struct s5m_rtc_reg_config *regs;
};
static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm,
@@ -104,8 +141,9 @@ static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
unsigned int data;
do {
- ret = regmap_read(info->regmap, S5M_RTC_UDR_CON, &data);
- } while (--retry && (data & S5M_RTC_UDR_MASK) && !ret);
+ ret = regmap_read(info->regmap, info->regs->rtc_udr_update,
+ &data);
+ } while (--retry && (data & info->regs->rtc_udr_mask) && !ret);
if (!retry)
dev_err(info->dev, "waiting for UDR update, reached max number of retries\n");
@@ -113,21 +151,47 @@ static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
return ret;
}
+static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
+ struct rtc_wkalrm *alarm)
+{
+ int ret;
+ unsigned int val;
+
+ switch (info->device_type) {
+ case S5M8767X:
+ case S5M8763X:
+ ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
+ val &= S5M_ALARM0_STATUS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (ret < 0)
+ return ret;
+
+ if (val)
+ alarm->pending = 1;
+ else
+ alarm->pending = 0;
+
+ return 0;
+}
+
static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
{
int ret;
unsigned int data;
- ret = regmap_read(info->regmap, S5M_RTC_UDR_CON, &data);
+ ret = regmap_read(info->regmap, info->regs->rtc_udr_update, &data);
if (ret < 0) {
dev_err(info->dev, "failed to read update reg(%d)\n", ret);
return ret;
}
data |= S5M_RTC_TIME_EN_MASK;
- data |= S5M_RTC_UDR_MASK;
+ data |= info->regs->rtc_udr_mask;
- ret = regmap_write(info->regmap, S5M_RTC_UDR_CON, data);
+ ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
if (ret < 0) {
dev_err(info->dev, "failed to write update reg(%d)\n", ret);
return ret;
@@ -143,7 +207,7 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
int ret;
unsigned int data;
- ret = regmap_read(info->regmap, S5M_RTC_UDR_CON, &data);
+ ret = regmap_read(info->regmap, info->regs->rtc_udr_update, &data);
if (ret < 0) {
dev_err(info->dev, "%s: fail to read update reg(%d)\n",
__func__, ret);
@@ -151,9 +215,9 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
}
data &= ~S5M_RTC_TIME_EN_MASK;
- data |= S5M_RTC_UDR_MASK;
+ data |= info->regs->rtc_udr_mask;
- ret = regmap_write(info->regmap, S5M_RTC_UDR_CON, data);
+ ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
if (ret < 0) {
dev_err(info->dev, "%s: fail to write update reg(%d)\n",
__func__, ret);
@@ -200,10 +264,11 @@ static void s5m8763_tm_to_data(struct rtc_time *tm, u8 *data)
static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
- u8 data[8];
+ u8 data[info->regs->regs_count];
int ret;
- ret = regmap_bulk_read(info->regmap, S5M_RTC_SEC, data, 8);
+ ret = regmap_bulk_read(info->regmap, info->regs->time, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -230,7 +295,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
- u8 data[8];
+ u8 data[info->regs->regs_count];
int ret = 0;
switch (info->device_type) {
@@ -251,7 +316,8 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday);
- ret = regmap_raw_write(info->regmap, S5M_RTC_SEC, data, 8);
+ ret = regmap_raw_write(info->regmap, info->regs->time, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -263,11 +329,12 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
- u8 data[8];
+ u8 data[info->regs->regs_count];
unsigned int val;
int ret, i;
- ret = regmap_bulk_read(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -279,54 +346,42 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return ret;
alrm->enabled = !!val;
-
- ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
- if (ret < 0)
- return ret;
-
break;
case S5M8767X:
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
- dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
- 1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
- alrm->time.tm_mday, alrm->time.tm_hour,
- alrm->time.tm_min, alrm->time.tm_sec,
- alrm->time.tm_wday);
-
alrm->enabled = 0;
- for (i = 0; i < 7; i++) {
+ for (i = 0; i < info->regs->regs_count; i++) {
if (data[i] & ALARM_ENABLE_MASK) {
alrm->enabled = 1;
break;
}
}
-
- alrm->pending = 0;
- ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
- if (ret < 0)
- return ret;
break;
default:
return -EINVAL;
}
- if (val & S5M_ALARM0_STATUS)
- alrm->pending = 1;
- else
- alrm->pending = 0;
+ dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
+ 1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
+ alrm->time.tm_mday, alrm->time.tm_hour,
+ alrm->time.tm_min, alrm->time.tm_sec,
+ alrm->time.tm_wday);
+
+ ret = s5m_check_peding_alarm_interrupt(info, alrm);
return 0;
}
static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
{
- u8 data[8];
+ u8 data[info->regs->regs_count];
int ret, i;
struct rtc_time tm;
- ret = regmap_bulk_read(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -341,10 +396,11 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
- for (i = 0; i < 7; i++)
+ for (i = 0; i < info->regs->regs_count; i++)
data[i] &= ~ALARM_ENABLE_MASK;
- ret = regmap_raw_write(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -362,11 +418,12 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
{
int ret;
- u8 data[8];
+ u8 data[info->regs->regs_count];
u8 alarm0_conf;
struct rtc_time tm;
- ret = regmap_bulk_read(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -393,7 +450,8 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
if (data[RTC_YEAR1] & 0x7f)
data[RTC_YEAR1] |= ALARM_ENABLE_MASK;
- ret = regmap_raw_write(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
ret = s5m8767_rtc_set_alarm_reg(info);
@@ -410,7 +468,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
- u8 data[8];
+ u8 data[info->regs->regs_count];
int ret;
switch (info->device_type) {
@@ -435,7 +493,8 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret < 0)
return ret;
- ret = regmap_raw_write(info->regmap, S5M_ALARM0_SEC, data, 8);
+ ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
+ info->regs->regs_count);
if (ret < 0)
return ret;
@@ -480,7 +539,7 @@ static const struct rtc_class_ops s5m_rtc_ops = {
static void s5m_rtc_enable_wtsr(struct s5m_rtc_info *info, bool enable)
{
int ret;
- ret = regmap_update_bits(info->regmap, S5M_WTSR_SMPL_CNTL,
+ ret = regmap_update_bits(info->regmap, info->regs->smpl_wtsr,
WTSR_ENABLE_MASK,
enable ? WTSR_ENABLE_MASK : 0);
if (ret < 0)
@@ -491,7 +550,7 @@ static void s5m_rtc_enable_wtsr(struct s5m_rtc_info *info, bool enable)
static void s5m_rtc_enable_smpl(struct s5m_rtc_info *info, bool enable)
{
int ret;
- ret = regmap_update_bits(info->regmap, S5M_WTSR_SMPL_CNTL,
+ ret = regmap_update_bits(info->regmap, info->regs->smpl_wtsr,
SMPL_ENABLE_MASK,
enable ? SMPL_ENABLE_MASK : 0);
if (ret < 0)
@@ -545,11 +604,13 @@ static int s5m_rtc_probe(struct platform_device *pdev)
case S5M8763X:
info->irq = regmap_irq_get_virq(s5m87xx->irq_data,
S5M8763_IRQ_ALARM0);
+ info->regs = &s5m_rtc_regs;
break;
case S5M8767X:
info->irq = regmap_irq_get_virq(s5m87xx->irq_data,
S5M8767_IRQ_RTCA1);
+ info->regs = &s5m_rtc_regs;
break;
default:
@@ -593,7 +654,7 @@ static void s5m_rtc_shutdown(struct platform_device *pdev)
if (info->wtsr_smpl) {
for (i = 0; i < 3; i++) {
s5m_rtc_enable_wtsr(info, false);
- regmap_read(info->regmap, S5M_WTSR_SMPL_CNTL, &val);
+ regmap_read(info->regmap, info->regs->smpl_wtsr, &val);
pr_debug("%s: WTSR_SMPL reg(0x%02x)\n", __func__, val);
if (val & WTSR_ENABLE_MASK)
pr_emerg("%s: fail to disable WTSR\n",
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists