[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1392302129-24947-1-git-send-email-stefan.sorensen@spectralink.com>
Date: Thu, 13 Feb 2014 15:35:22 +0100
From: Stefan Sørensen
<stefan.sorensen@...ctralink.com>
To: richardcochran@...il.com, grant.likely@...aro.org,
robh+dt@...nel.org, mark.rutland@....com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Cc: Stefan Sørensen
<stefan.sorensen@...ctralink.com>
Subject: [PATCH v3 0/3] dp83640: Get pin and master/slave configuration from DT
This patch series add DT configuration to the DP83640 PHY driver and makes
the configuration of periodic output pins dynamic.
Changes since v2:
- Add patch to properly configure perout triggers 0+1
- Keep extts and perout numbers separate
- Shorten pr_err lines
Changes since v1:
- Add bindings documentation
- Keep module parameters
- Rename gpio->pin
- Split patch into DT part and dynamic periodic output support
Stefan Sørensen (3):
net:phy:dp83640: Program pulsewidth2 values of perout triggers 0 and 1
net:phy:dp83640: Support a configurable number of periodic outputs
net:phy:dp83640: Get pin and master/slave configuration from DT
Documentation/devicetree/bindings/net/dp83640.txt | 29 ++++
drivers/net/phy/dp83640.c | 199 +++++++++++++++-------
2 files changed, 170 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dp83640.txt
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists