| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1392359506-7030-1-git-send-email-milo.kim@ti.com>
Date: Fri, 14 Feb 2014 15:31:46 +0900
From: Milo Kim <milo.kim@...com>
To: Lee Jones <lee.jones@...aro.org>, Jingoo Han <jg1.han@...sung.com>,
Bryan Wu <cooloney@...il.com>, Mark Brown <broonie@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Milo Kim <milo.kim@...com>
Subject: [PATCH 05/10] backlight: ti-lmu-backlight: Add LM3633 driver
LM3633 has 3 backlight strings and 11 bit dimming is supported.
PWM brightness control is also supported.
Common backlight driver is controlled by TI LMU backlight driver.
Only LM3633 specific code is implemented here.
Cc: Jingoo Han <jg1.han@...sung.com>
Cc: Bryan Wu <cooloney@...il.com>
Cc: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Milo Kim <milo.kim@...com>
---
drivers/video/backlight/Kconfig | 9 ++
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lm3633_bl.c | 244 +++++++++++++++++++++++++++++++++++
3 files changed, 254 insertions(+)
create mode 100644 drivers/video/backlight/lm3633_bl.c
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index a43a015..aa012a3 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -402,6 +402,15 @@ config BACKLIGHT_LM3631
Up to 2 backlight strings and 11 bit dimming is supported.
PWM brightness control is also supported.
+config BACKLIGHT_LM3633
+ tristate "Backlight driver for TI LM3633"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_TI_LMU
+ select TI_LMU_BACKLIGHT
+ help
+ Say Y to enable the backlight driver for TI LM3633.
+ Up to 3 backlight strings and 11 bit dimming is supported.
+ PWM brightness control is also supported.
+
config TI_LMU_BACKLIGHT
tristate "Backlight driver for TI LMU"
depends on BACKLIGHT_LM3532 || BACKLIGHT_LM3631 || BACKLIGHT_LM3633 || BACKLIGHT_LM3695 || BACKLIGHT_LM3697
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 2a17f8b..842a256 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
obj-$(CONFIG_BACKLIGHT_LM3532) += lm3532_bl.o
obj-$(CONFIG_BACKLIGHT_LM3631) += lm3631_bl.o
+obj-$(CONFIG_BACKLIGHT_LM3633) += lm3633_bl.o
obj-$(CONFIG_TI_LMU_BACKLIGHT) += ti-lmu-backlight.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
diff --git a/drivers/video/backlight/lm3633_bl.c b/drivers/video/backlight/lm3633_bl.c
new file mode 100644
index 0000000..c12fd42
--- /dev/null
+++ b/drivers/video/backlight/lm3633_bl.c
@@ -0,0 +1,244 @@
+/*
+ * TI LM3633 Backlight Driver
+ *
+ * Copyright 2014 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * LM3633 backlight driver consists of two parts
+ *
+ * 1) LM3633 chip specific part: this file
+ * Define device specific operations
+ * Register LMU backlight driver
+ *
+ * 2) LMU backlight common driver: ti-lmu-backlight
+ * General backlight subsystem control
+ *
+ * 3) LMU effect driver
+ * Backlight slope time configuration
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/mfd/ti-lmu.h>
+#include <linux/mfd/ti-lmu-effect.h>
+#include <linux/mfd/ti-lmu-register.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#include "ti-lmu-backlight.h"
+
+#define LM3633_BOOST_OVP_40V 0x6
+#define LM3633_BL_MAX_STRINGS 3
+#define LM3633_BL_MAX_BRIGHTNESS 2047
+
+static int lm3633_bl_init(struct ti_lmu_bl_chip *chip)
+{
+ /* Configure ramp selection for each bank */
+ return ti_lmu_update_bits(chip->lmu, LM3633_REG_BL_RAMP_CONF,
+ LM3633_BL_RAMP_MASK, LM3633_BL_RAMP_EACH);
+}
+
+static int lm3633_bl_enable(struct ti_lmu_bl *lmu_bl, int enable)
+{
+ return ti_lmu_update_bits(lmu_bl->chip->lmu, LM3633_REG_ENABLE,
+ BIT(lmu_bl->bank_id),
+ enable << lmu_bl->bank_id);
+}
+
+static int lm3633_bl_set_brightness(struct ti_lmu_bl *lmu_bl, int brightness)
+{
+ int ret;
+ u8 data;
+ u8 reg_lsb[] = { LM3633_REG_BRT_HVLED_A_LSB,
+ LM3633_REG_BRT_HVLED_B_LSB, };
+ u8 reg_msb[] = { LM3633_REG_BRT_HVLED_A_MSB,
+ LM3633_REG_BRT_HVLED_B_MSB, };
+
+ if (lmu_bl->mode == BL_PWM_BASED) {
+ /*
+ * PWM can start from any non-zero code and dim down to zero.
+ * So, brightness register should be updated even in PWM mode.
+ */
+ if (brightness > 0)
+ brightness = LM3633_BL_MAX_BRIGHTNESS;
+ else
+ brightness = 0;
+ }
+
+ data = brightness & LM3633_BRT_HVLED_LSB_MASK;
+ ret = ti_lmu_update_bits(lmu_bl->chip->lmu, reg_lsb[lmu_bl->bank_id],
+ LM3633_BRT_HVLED_LSB_MASK, data);
+ if (ret)
+ return ret;
+
+ data = (brightness >> LM3633_BRT_HVLED_MSB_SHIFT) & 0xFF;
+ return ti_lmu_write_byte(lmu_bl->chip->lmu, reg_msb[lmu_bl->bank_id],
+ data);
+}
+
+static int lm3633_bl_boost_configure(struct ti_lmu_bl *lmu_bl)
+{
+ return ti_lmu_update_bits(lmu_bl->chip->lmu, LM3633_REG_BOOST_CFG,
+ LM3633_BOOST_OVP_MASK, LM3633_BOOST_OVP_40V);
+}
+
+static int lm3633_bl_set_ctrl_mode(struct ti_lmu_bl *lmu_bl)
+{
+ int bank_id = lmu_bl->bank_id;
+
+ if (lmu_bl->mode == BL_PWM_BASED)
+ return ti_lmu_update_bits(lmu_bl->chip->lmu,
+ LM3633_REG_PWM_CFG,
+ BIT(bank_id), 1 << bank_id);
+
+ return 0;
+}
+
+static int lm3633_bl_string_configure(struct ti_lmu_bl *lmu_bl)
+{
+ struct ti_lmu *lmu = lmu_bl->chip->lmu;
+ int is_detected = 0;
+ int i, ret;
+
+ /* Assign control bank from backlight string configuration */
+ for (i = 0; i < LM3633_BL_MAX_STRINGS; i++) {
+ if (test_bit(i, &lmu_bl->bl_pdata->bl_string)) {
+ ret = ti_lmu_update_bits(lmu,
+ LM3633_REG_HVLED_OUTPUT_CFG,
+ BIT(i), lmu_bl->bank_id << i);
+ if (ret)
+ return ret;
+
+ is_detected = 1;
+ }
+ }
+
+ if (!is_detected) {
+ dev_err(lmu_bl->chip->dev, "No backlight string found\n");
+ return -EINVAL;
+ }
+
+ if (lmu_bl->mode == BL_PWM_BASED) {
+ snprintf(lmu_bl->pwm_name, sizeof(lmu_bl->pwm_name),
+ "%s", LMU_BL_DEFAULT_PWM_NAME);
+ }
+
+ return 0;
+}
+
+static int lm3633_bl_set_current(struct ti_lmu_bl *lmu_bl)
+{
+ u8 reg[] = { LM3633_REG_IMAX_HVLED_A, LM3633_REG_IMAX_HVLED_B, };
+
+ return ti_lmu_write_byte(lmu_bl->chip->lmu, reg[lmu_bl->bank_id],
+ lmu_bl->bl_pdata->imax);
+}
+
+static void lm3633_bl_effect_request(enum lmu_effect_request_id id,
+ struct ti_lmu_bl *lmu_bl)
+{
+ const char *name[][2] = {
+ { LM3633_EFFECT_BL0_RAMPUP, LM3633_EFFECT_BL0_RAMPDOWN },
+ { LM3633_EFFECT_BL1_RAMPUP, LM3633_EFFECT_BL1_RAMPDOWN },
+ };
+
+ ti_lmu_effect_request(name[lmu_bl->bank_id][id],
+ ti_lmu_backlight_effect_callback, id, lmu_bl);
+}
+
+static int lm3633_bl_configure(struct ti_lmu_bl *lmu_bl)
+{
+ int ret;
+
+ ret = lm3633_bl_boost_configure(lmu_bl);
+ if (ret)
+ return ret;
+
+ ret = lm3633_bl_set_ctrl_mode(lmu_bl);
+ if (ret)
+ return ret;
+
+ ret = lm3633_bl_string_configure(lmu_bl);
+ if (ret)
+ return ret;
+
+ ret = lm3633_bl_set_current(lmu_bl);
+ if (ret)
+ return ret;
+
+ /* LMU effect is optional, checking return value is not required */
+ if (lmu_bl->bl_pdata->ramp_up_ms)
+ lm3633_bl_effect_request(BL_EFFECT_RAMPUP, lmu_bl);
+
+ if (lmu_bl->bl_pdata->ramp_down_ms)
+ lm3633_bl_effect_request(BL_EFFECT_RAMPDN, lmu_bl);
+
+ return 0;
+}
+
+static const struct ti_lmu_bl_ops lm3633_lmu_ops = {
+ .init = lm3633_bl_init,
+ .configure = lm3633_bl_configure,
+ .update_brightness = lm3633_bl_set_brightness,
+ .bl_enable = lm3633_bl_enable,
+ .max_brightness = LM3633_BL_MAX_BRIGHTNESS,
+};
+
+static int lm3633_bl_probe(struct platform_device *pdev)
+{
+ struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
+ struct ti_lmu_bl *lmu_bl;
+ struct ti_lmu_bl_chip *chip;
+
+ chip = ti_lmu_backlight_init_device(&pdev->dev, lmu, &lm3633_lmu_ops);
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+
+ lmu_bl = ti_lmu_backlight_register(chip, lmu->pdata->bl_pdata,
+ lmu->pdata->num_backlights);
+ if (IS_ERR(lmu_bl))
+ return PTR_ERR(lmu_bl);
+
+ platform_set_drvdata(pdev, lmu_bl);
+
+ return 0;
+}
+
+static int lm3633_bl_remove(struct platform_device *pdev)
+{
+ struct ti_lmu_bl *lmu_bl = platform_get_drvdata(pdev);
+
+ return ti_lmu_backlight_unregister(lmu_bl);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id lm3633_bl_of_match[] = {
+ { .compatible = "ti,lm3633-backlight", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3633_bl_of_match);
+#endif
+
+static struct platform_driver lm3633_bl_driver = {
+ .probe = lm3633_bl_probe,
+ .remove = lm3633_bl_remove,
+ .driver = {
+ .name = "lm3633-backlight",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(lm3633_bl_of_match),
+ },
+};
+module_platform_driver(lm3633_bl_driver);
+
+MODULE_DESCRIPTION("TI LM3633 Backlight Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lm3633-backlight");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists