| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <72d03048d12d39654ca316f01f62ca795e9d275d.1392508410.git.joe@perches.com>
Date: Sat, 15 Feb 2014 15:57:04 -0800
From: Joe Perches <joe@...ches.com>
To: netdev@...r.kernel.org
Cc: Jay Vosburgh <fubar@...ibm.com>,
Veaceslav Falico <vfalico@...hat.com>,
Andy Gospodarek <andy@...yhouse.net>,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/4] bonding: Convert pr_warning to pr_warn, neatening
Use more current logging style.
Coalesce formats, realign arguments, drop unnecessary periods.
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/bonding/bond_alb.c | 6 +-
drivers/net/bonding/bond_debugfs.c | 10 ++--
drivers/net/bonding/bond_main.c | 116 ++++++++++++++++++-------------------
drivers/net/bonding/bond_procfs.c | 8 +--
4 files changed, 67 insertions(+), 73 deletions(-)
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index a212860..e9f0a98 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1243,9 +1243,9 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
if (free_mac_slave) {
alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr);
- pr_warning("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
- bond->dev->name, slave->dev->name,
- free_mac_slave->dev->name);
+ pr_warn("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
+ bond->dev->name, slave->dev->name,
+ free_mac_slave->dev->name);
} else if (has_bond_addr) {
pr_err("%s: Error: the hw address of slave %s is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)\n",
diff --git a/drivers/net/bonding/bond_debugfs.c b/drivers/net/bonding/bond_debugfs.c
index 5fc4c23..2d3f7fa 100644
--- a/drivers/net/bonding/bond_debugfs.c
+++ b/drivers/net/bonding/bond_debugfs.c
@@ -69,7 +69,7 @@ void bond_debug_register(struct bonding *bond)
debugfs_create_dir(bond->dev->name, bonding_debug_root);
if (!bond->debug_dir) {
- pr_warning("%s: Warning: failed to register to debugfs\n",
+ pr_warn("%s: Warning: failed to register to debugfs\n",
bond->dev->name);
return;
}
@@ -98,9 +98,8 @@ void bond_debug_reregister(struct bonding *bond)
if (d) {
bond->debug_dir = d;
} else {
- pr_warning("%s: Warning: failed to reregister, "
- "so just unregister old one\n",
- bond->dev->name);
+ pr_warn("%s: Warning: failed to reregister, so just unregister old one\n",
+ bond->dev->name);
bond_debug_unregister(bond);
}
}
@@ -110,8 +109,7 @@ void bond_create_debugfs(void)
bonding_debug_root = debugfs_create_dir("bonding", NULL);
if (!bonding_debug_root) {
- pr_warning("Warning: Cannot create bonding directory"
- " in debugfs\n");
+ pr_warn("Warning: Cannot create bonding directory in debugfs\n");
}
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 58aa531..1d4dfc9 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1183,8 +1183,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (!bond->params.use_carrier &&
slave_dev->ethtool_ops->get_link == NULL &&
slave_ops->ndo_do_ioctl == NULL) {
- pr_warning("%s: Warning: no link monitoring support for %s\n",
- bond_dev->name, slave_dev->name);
+ pr_warn("%s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* already enslaved */
@@ -1202,9 +1202,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
bond_dev->name, slave_dev->name, bond_dev->name);
return -EPERM;
} else {
- pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
- bond_dev->name, slave_dev->name,
- slave_dev->name, bond_dev->name);
+ pr_warn("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
+ bond_dev->name, slave_dev->name,
+ slave_dev->name, bond_dev->name);
}
} else {
pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
@@ -1419,12 +1419,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
* supported); thus, we don't need to change
* the messages for netif_carrier.
*/
- pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
- bond_dev->name, slave_dev->name);
+ pr_warn("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n",
+ bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
- pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
- bond_dev->name, slave_dev->name);
+ pr_warn("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n",
+ bond_dev->name, slave_dev->name);
}
}
@@ -1725,10 +1725,10 @@ static int __bond_release_one(struct net_device *bond_dev,
eth_hw_addr_random(bond_dev);
if (vlan_uses_dev(bond_dev)) {
- pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
- bond_dev->name, bond_dev->name);
- pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
- bond_dev->name);
+ pr_warn("%s: Warning: clearing HW address of %s while it still has VLANs\n",
+ bond_dev->name, bond_dev->name);
+ pr_warn("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs\n",
+ bond_dev->name);
}
}
@@ -4046,74 +4046,71 @@ static int bond_check_params(struct bond_params *params)
}
params->ad_select = valptr->value;
if (bond_mode != BOND_MODE_8023AD)
- pr_warning("ad_select param only affects 802.3ad mode\n");
+ pr_warn("ad_select param only affects 802.3ad mode\n");
} else {
params->ad_select = BOND_AD_STABLE;
}
if (max_bonds < 0) {
- pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
- max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
+ pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
+ max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
if (miimon < 0) {
- pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
- miimon, INT_MAX);
+ pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ miimon, INT_MAX);
miimon = 0;
}
if (updelay < 0) {
- pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
- updelay, INT_MAX);
+ pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ updelay, INT_MAX);
updelay = 0;
}
if (downdelay < 0) {
- pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
- downdelay, INT_MAX);
+ pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ downdelay, INT_MAX);
downdelay = 0;
}
if ((use_carrier != 0) && (use_carrier != 1)) {
- pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
- use_carrier);
+ pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
+ use_carrier);
use_carrier = 1;
}
if (num_peer_notif < 0 || num_peer_notif > 255) {
- pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
- num_peer_notif);
+ pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
+ num_peer_notif);
num_peer_notif = 1;
}
/* reset values for 802.3ad/TLB/ALB */
if (BOND_NO_USES_ARP(bond_mode)) {
if (!miimon) {
- pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
- pr_warning("Forcing miimon to 100msec\n");
+ pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
+ pr_warn("Forcing miimon to 100msec\n");
miimon = BOND_DEFAULT_MIIMON;
}
}
if (tx_queues < 1 || tx_queues > 255) {
- pr_warning("Warning: tx_queues (%d) should be between "
- "1 and 255, resetting to %d\n",
- tx_queues, BOND_DEFAULT_TX_QUEUES);
+ pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
+ tx_queues, BOND_DEFAULT_TX_QUEUES);
tx_queues = BOND_DEFAULT_TX_QUEUES;
}
if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
- pr_warning("Warning: all_slaves_active module parameter (%d), "
- "not of valid value (0/1), so it was set to "
- "0\n", all_slaves_active);
+ pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
+ all_slaves_active);
all_slaves_active = 0;
}
if (resend_igmp < 0 || resend_igmp > 255) {
- pr_warning("Warning: resend_igmp (%d) should be between "
- "0 and 255, resetting to %d\n",
- resend_igmp, BOND_DEFAULT_RESEND_IGMP);
+ pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
+ resend_igmp, BOND_DEFAULT_RESEND_IGMP);
resend_igmp = BOND_DEFAULT_RESEND_IGMP;
}
@@ -4134,37 +4131,36 @@ static int bond_check_params(struct bond_params *params)
/* just warn the user the up/down delay will have
* no effect since miimon is zero...
*/
- pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
- updelay, downdelay);
+ pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
+ updelay, downdelay);
}
} else {
/* don't allow arp monitoring */
if (arp_interval) {
- pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
- miimon, arp_interval);
+ pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
+ miimon, arp_interval);
arp_interval = 0;
}
if ((updelay % miimon) != 0) {
- pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
- updelay, miimon,
- (updelay / miimon) * miimon);
+ pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
+ updelay, miimon, (updelay / miimon) * miimon);
}
updelay /= miimon;
if ((downdelay % miimon) != 0) {
- pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
- downdelay, miimon,
- (downdelay / miimon) * miimon);
+ pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
+ downdelay, miimon,
+ (downdelay / miimon) * miimon);
}
downdelay /= miimon;
}
if (arp_interval < 0) {
- pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to 0\n",
- arp_interval, INT_MAX);
+ pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ arp_interval, INT_MAX);
arp_interval = 0;
}
@@ -4175,22 +4171,22 @@ static int bond_check_params(struct bond_params *params)
__be32 ip;
if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
IS_IP_TARGET_UNUSABLE_ADDRESS(ip)) {
- pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
- arp_ip_target[i]);
+ pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
+ arp_ip_target[i]);
arp_interval = 0;
} else {
if (bond_get_targets_ip(arp_target, ip) == -1)
arp_target[arp_ip_count++] = ip;
else
- pr_warning("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
- &ip);
+ pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
+ &ip);
}
}
if (arp_interval && !arp_ip_count) {
/* don't allow arping if no arp_ip_target given... */
- pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
- arp_interval);
+ pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
+ arp_interval);
arp_interval = 0;
}
@@ -4255,8 +4251,8 @@ static int bond_check_params(struct bond_params *params)
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
- pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
- primary, bond_mode_name(bond_mode));
+ pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
+ primary, bond_mode_name(bond_mode));
primary = NULL;
}
@@ -4285,14 +4281,14 @@ static int bond_check_params(struct bond_params *params)
}
fail_over_mac_value = valptr->value;
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
- pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
+ pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
} else {
fail_over_mac_value = BOND_FOM_NONE;
}
if (lp_interval == 0) {
- pr_warning("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
- INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
+ pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
+ INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
}
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 3ac20e7..f86fcc7 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -254,8 +254,8 @@ void bond_create_proc_entry(struct bonding *bond)
S_IRUGO, bn->proc_dir,
&bond_info_fops, bond);
if (bond->proc_entry == NULL)
- pr_warning("Warning: Cannot create /proc/net/%s/%s\n",
- DRV_NAME, bond_dev->name);
+ pr_warn("Warning: Cannot create /proc/net/%s/%s\n",
+ DRV_NAME, bond_dev->name);
else
memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
}
@@ -281,8 +281,8 @@ void __net_init bond_create_proc_dir(struct bond_net *bn)
if (!bn->proc_dir) {
bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
if (!bn->proc_dir)
- pr_warning("Warning: cannot create /proc/net/%s\n",
- DRV_NAME);
+ pr_warn("Warning: cannot create /proc/net/%s\n",
+ DRV_NAME);
}
}
--
1.8.1.2.459.gbcd45b4.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists