early console in setup code [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc2-next-20140214-03226-gda8d308 (kbuild@xian) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 15 22:15:18 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f1af0-0x000f1aff] mapped at [c00f1af0] [ 0.000000] mpc: f1b00-f1be4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x0d7fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k [ 0.000000] BRK [0x0d2ab000, 0x0d2abfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x0d2ac000, 0x0d2acfff] PGTABLE [ 0.000000] BRK [0x0d2ad000, 0x0d2adfff] PGTABLE [ 0.000000] cma: CMA: reserved 28 MiB at 0dc00000 [ 0.000000] RAMDISK: [mem 0x0fcbd000-0x0ffeffff] [ 0.000000] ACPI: RSDP 0x000F1960 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0FFFFB3C 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0FFFF177 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0FFFE040 001137 (v01 BXPC BXDSDT 00000001 INTL 20130823) [ 0.000000] ACPI: FACS 0x0FFFE000 000040 [ 0.000000] ACPI: SSDT 0x0FFFF1EB 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0FFFFA84 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0FFFFB04 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] BRK [0x0d2ae000, 0x0d2aefff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 600 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfca7000 s30976 r0 d14080 u45056 [ 0.000000] pcpu-alloc: s30976 r0 d14080 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr fca9600 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-x1-02152208/next:master/.vmlinuz-da8d308fbdb8360078786b3e125238122c4fc611-20140215221646-9-lkp-sbx04 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x1-02152208/da8d308fbdb8360078786b3e125238122c4fc611/vmlinuz-3.14.0-rc2-next-20140214-03226-gda8d308 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 211228K/261744K available (4112K kernel code, 643K rwdata, 2316K rodata, 528K init, 4924K bss, 50516K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xffbfe000 ( 756 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xcccea000 - 0xccd6e000 ( 528 kB) [ 0.000000] .data : 0xcca045ad - 0xccce9e40 (2966 kB) [ 0.000000] .text : 0xcc600000 - 0xcca045ad (4113 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=cc00a000 soft=cc00c000 [ 0.000000] ACPI: Core revision 20140114 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3551 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | |failed| [ 0.000000] recursive read-lock #2: | ok | |failed| [ 0.000000] mixed read-write-lock: |failed| |failed| [ 0.000000] mixed write-read-lock: |failed| |failed| [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing:failed| ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context:failed| ok | ok | [ 0.000000] try:failed| ok |failed| [ 0.000000] block:failed| ok |failed| [ 0.000000] spinlock:failed| ok |failed| [ 0.000000] -------------------------------------------------------- [ 0.000000] 141 out of 253 testcases failed, as expected. | [ 0.000000] ---------------------------------------------------- [ 0.000000] ODEBUG: 13 of 13 active objects replaced [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.638 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.27 BogoMIPS (lpj=10774552) [ 0.008000] pid_max: default: 4096 minimum: 301 [ 0.008000] Mount-cache hash table entries: 512 [ 0.008000] Initializing cgroup subsys perf_event [ 0.008000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.008000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.008000] tlb_flushall_shift: 6 [ 0.008236] debug: unmapping init [mem 0xccd6e000-0xccd6ffff] [ 0.009800] ftrace: allocating 22589 entries in 45 pages [ 0.020063] Getting VERSION: 50014 [ 0.020428] Getting VERSION: 50014 [ 0.020788] Getting ID: 0 [ 0.021031] Getting ID: f000000 [ 0.021329] Getting LVT0: 8700 [ 0.021607] Getting LVT1: 8400 [ 0.021908] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.022454] enabled ExtINT on CPU#0 [ 0.023967] ENABLING IO-APIC IRQs [ 0.024012] init IO_APIC IRQs [ 0.024298] apic 0 pin 0 not connected [ 0.024646] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.025457] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.026167] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.026984] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.028021] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.028735] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.029444] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.030158] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.030927] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.031630] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.032030] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.032809] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.033643] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.034365] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.035135] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.036018] apic 0 pin 16 not connected [ 0.036381] apic 0 pin 17 not connected [ 0.036783] apic 0 pin 18 not connected [ 0.037123] apic 0 pin 19 not connected [ 0.037486] apic 0 pin 20 not connected [ 0.037839] apic 0 pin 21 not connected [ 0.038201] apic 0 pin 22 not connected [ 0.038543] apic 0 pin 23 not connected [ 0.039053] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040004] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.041306] Using local APIC timer interrupts. [ 0.041306] calibrating APIC timer ... [ 0.044000] ... lapic delta = 6250677 [ 0.044000] ... PM-Timer delta = 358057 [ 0.044000] ... PM-Timer result ok [ 0.044000] ..... delta 6250677 [ 0.044000] ..... mult: 268464532 [ 0.044000] ..... calibration result: 4000433 [ 0.044000] ..... CPU clock speed is 2694.1209 MHz. [ 0.044000] ..... host bus clock speed is 1000.0433 MHz. [ 0.044097] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.045986] ftrace: Allocated trace_printk buffers [ 0.049338] CPU 1 irqstacks, hard=cc390000 soft=cc392000 [ 0.050239] x86: Booting SMP configuration: [ 0.050936] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.008000] kvm-clock: cpu 1, msr 0:fffd041, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.064118] x86: Booted up 1 node, 2 CPUs [ 0.064078] KVM setup async PF for cpu 1 [ 0.064078] kvm-stealtime: cpu 1, msr fcb4600 [ 0.068009] ---------------- [ 0.068383] | NMI testsuite: [ 0.068757] -------------------- [ 0.069171] remote IPI: ok | [ 0.080171] local IPI: ok | [ 0.104012] -------------------- [ 0.104465] Good, all 2 testcases passed! | [ 0.105051] --------------------------------- [ 0.105626] smpboot: Total of 2 processors activated (10774.55 BogoMIPS) [ 0.113281] NET: Registered protocol family 16 [ 0.114622] EISA bus registered [ 0.115042] cpuidle: using governor menu [ 0.116150] ACPI: bus type PCI registered [ 0.116865] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.117781] PCI: PCI BIOS revision 2.10 entry at 0xfd467, last bus=0 [ 0.118585] PCI: Using configuration type 1 for base access [ 0.132387] ACPI: Added _OSI(Module Device) [ 0.132978] ACPI: Added _OSI(Processor Device) [ 0.133562] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.134176] ACPI: Added _OSI(Processor Aggregator Device) [ 0.140307] ACPI: Interpreter enabled [ 0.140827] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140114/hwxface-580) [ 0.142054] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140114/hwxface-580) [ 0.143292] ACPI: (supports S0 S3 S5) [ 0.143779] ACPI: Using IOAPIC for interrupt routing [ 0.144039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.153119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.153941] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.154657] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.155694] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.156127] PCI host bridge to bus 0000:00 [ 0.156671] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.157378] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.157894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.158528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.160007] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.160711] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.162126] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.163365] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.166535] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.168243] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.169087] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.169812] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.170683] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.172512] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.174218] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.180006] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.181324] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.182780] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.184006] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.188905] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.190067] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.191382] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.195199] pci_bus 0000:00: on NUMA node 0 [ 0.196434] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.197102] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.197808] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.198500] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.199087] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.199772] acpi LNXCPU:00: Invalid PBLK length [0] [ 0.200110] acpi LNXCPU:01: Invalid PBLK length [0] [ 0.200812] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.201463] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202199] vgaarb: loaded [ 0.202443] vgaarb: bridge control possible 0000:00:02.0 [ 0.203357] pps_core: LinuxPPS API ver. 1 registered [ 0.204004] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.204891] PTP clock support registered [ 0.205242] EDAC MC: Ver: 3.0.0 [ 0.205828] Advanced Linux Sound Architecture Driver Initialized. [ 0.205828] PCI: Using ACPI for IRQ routing [ 0.205828] PCI: pci_cache_line_size set to 64 bytes [ 0.205828] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.208006] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.209205] Switched to clocksource kvm-clock [ 0.214664] pnp: PnP ACPI init [ 0.215057] ACPI: bus type PNP registered [ 0.215451] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.216392] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.217085] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.217874] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.218498] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.219288] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.219976] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.220711] pnp 00:03: [dma 2] [ 0.221043] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.221975] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.222939] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.223638] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.224459] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.225140] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:3) [ 0.225903] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.226795] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.227492] pnp: PnP ACPI: found 8 devices [ 0.227927] ACPI: bus type PNP unregistered [ 0.263405] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.264146] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.264873] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.265639] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.266473] NET: Registered protocol family 1 [ 0.267047] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.267824] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.268572] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.269362] pci 0000:00:02.0: Boot video device [ 0.269965] PCI: CLS 0 bytes, default 64 [ 0.270668] Unpacking initramfs... [ 0.370568] debug: unmapping init [mem 0xcfcbd000-0xcffeffff] [ 0.372418] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 0.373155] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 0.373859] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.378231] PCLMULQDQ-NI instructions are not detected. [ 0.378916] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 0.381344] Initializing RT-Tester: OK [ 0.381836] spin_lock-torture:--- Start of test: nwriters_stress=4 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 0.383750] spin_lock-torture: Creating torture_shuffle task [ 0.384604] spin_lock-torture: torture_shuffle task started [ 0.384607] spin_lock-torture: Creating torture_stutter task [ 0.384647] spin_lock-torture: Creating lock_torture_writer task [ 0.384669] spin_lock-torture: torture_stutter task started [ 0.387325] spin_lock-torture: Creating lock_torture_writer task [ 0.387350] spin_lock-torture: lock_torture_writer task started [ 0.388926] spin_lock-torture: Creating lock_torture_writer task [ 0.388933] spin_lock-torture: lock_torture_writer task started [ 0.390547] spin_lock-torture: Creating lock_torture_writer task [ 0.390552] spin_lock-torture: lock_torture_writer task started [ 0.392137] spin_lock-torture: Creating lock_torture_stats task [ 0.392143] spin_lock-torture: lock_torture_writer task started [ 0.393694] spin_lock-torture: lock_torture_stats task started [ 0.394233] futex hash table entries: 16 (order: -2, 1024 bytes) [ 0.396772] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.403362] VFS: Disk quotas dquot_6.5.2 [ 0.404035] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.405200] fuse init (API version 7.22) [ 0.420044] alg: No test for crc32 (crc32-table) [ 0.421312] alg: No test for lz4 (lz4-generic) [ 0.422051] alg: No test for lz4hc (lz4hc-generic) [ 0.422891] alg: No test for stdrng (krng) [ 0.434566] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.437222] test_string_helpers: Running tests... [ 0.438627] xz_dec_test: module loaded [ 0.439121] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 0.440687] ipmi message handler version 39.2 [ 0.441362] IPMI Watchdog: driver initialized [ 0.442101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.443092] ACPI: Power Button [PWRF] [ 0.468826] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.495097] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.497041] lp: driver loaded but no devices found [ 0.497733] DoubleTalk PC - not found [ 0.498591] Non-volatile memory driver v1.3 [ 0.499133] toshiba: not a supported Toshiba laptop [ 0.499837] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 0.500889] platform pc8736x_gpio.0: no device found [ 0.501805] nsc_gpio initializing [ 0.502299] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 0.502967] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.504185] Hangcheck: Using getrawmonotonic(). [ 0.505011] [drm] Initialized drm 1.1.0 20060810 [ 0.505680] parport_pc 00:04: reported by Plug and Play ACPI [ 0.506694] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 1.406229] lp0: using parport0 (interrupt-driven). [ 1.406678] lp0: console ready [ 1.407573] dummy-irq: no IRQ given. Use irq=N [ 1.408262] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 1.409251] c2port c2port0: C2 port uc added [ 1.409797] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 1.411122] platform physmap-flash.0: failed to claim resource 0 [ 1.411945] Could not find PAR responsible for SC520CDP Flash Bank #0 [ 1.412735] Trying default address 0x8400000 [ 1.413303] SC520 CDP flash device: 0x800000 at 0x8400000 [ 1.413958] Failed to ioremap_nocache [ 1.450054] No valid DiskOnChip devices found [ 1.450727] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.451685] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.452721] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.453889] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.455086] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.456252] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.456408] tsc: Refined TSC clocksource calibration: 2693.505 MHz [ 1.457877] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 1.458685] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 1.459297] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 1.460042] flash size: 128 MiB [ 1.460469] page size: 512 bytes [ 1.460899] OOB area size: 16 bytes [ 1.461356] sector size: 16 KiB [ 1.461763] pages number: 262144 [ 1.462202] pages per sector: 32 [ 1.462615] bus width: 8 [ 1.462930] bits in sector size: 14 [ 1.463401] bits in page size: 9 [ 1.463808] bits in OOB size: 4 [ 1.464096] flash size with OOB: 135168 KiB [ 1.464442] page address bytes: 4 [ 1.464778] sector address bytes: 3 [ 1.465236] options: 0x42 [ 1.466539] Scanning device for bad blocks [ 1.492237] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 1.493059] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 1.494307] parport0: cannot grant exclusive access for device spi-lm70llp [ 1.495191] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 1.495897] HSI/SSI char device loaded [ 1.496224] parport0: cannot grant exclusive access for device ks0108 [ 1.496873] ks0108: ERROR: parport didn't register new device [ 1.497677] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.499628] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.500277] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.501164] mousedev: PS/2 mouse device common for all mice [ 1.501951] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 1.503559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.504789] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 1.506580] mk712: device not present [ 1.507301] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 1.508294] ideapad_slidebar: DMI does not match [ 1.508984] rtc_cmos 00:00: RTC can wake from S4 [ 1.509916] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.510959] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.512370] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 1.513093] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 1.513686] i2c /dev entries driver [ 1.514075] i2c-parport: adapter type unspecified [ 1.514787] isa i2c-pca-isa.0: Please specify I/O base [ 1.515622] pps pps0: new PPS source ktimer [ 1.516164] pps pps0: ktimer PPS source registered [ 1.516770] pps_parport: parallel port PPS client [ 1.517375] parport0: cannot grant exclusive access for device pps_parport [ 1.518248] pps_parport: couldn't register with parport0 [ 1.518986] Driver for 1-wire Dallas network protocol. [ 1.519733] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 1.520544] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 1.521811] power_supply test_ac: uevent [ 1.522345] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.522917] power_supply test_ac: prop ONLINE=1 [ 1.523338] power_supply test_ac: power_supply_changed [ 1.524039] power_supply test_ac: power_supply_changed_work [ 1.524758] power_supply test_ac: power_supply_update_gen_leds 1 [ 1.525540] power_supply test_ac: uevent [ 1.526048] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.526884] power_supply test_ac: prop ONLINE=1 [ 1.527615] power_supply test_battery: uevent [ 1.528196] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.529033] power_supply test_battery: prop STATUS=Discharging [ 1.529783] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.530516] power_supply test_battery: prop HEALTH=Good [ 1.531233] power_supply test_battery: prop PRESENT=1 [ 1.531881] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.532612] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.533403] power_supply test_battery: prop CHARGE_FULL=100 [ 1.534127] power_supply test_battery: prop CHARGE_NOW=50 [ 1.534821] power_supply test_battery: prop CAPACITY=50 [ 1.535518] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.536309] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.537098] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.537823] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.538605] power_supply test_battery: prop MANUFACTURER=Linux [ 1.539370] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc2-next-20140214-03226-gda8d308 [ 1.540485] power_supply test_battery: prop TEMP=26 [ 1.541111] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.542010] power_supply test_battery: power_supply_changed [ 1.542772] power_supply test_battery: power_supply_changed_work [ 1.543563] power_supply test_battery: power_supply_update_bat_leds 2 [ 1.544201] power_supply test_battery: uevent [ 1.544565] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.545363] power_supply test_battery: prop STATUS=Discharging [ 1.546125] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.546843] power_supply test_battery: prop HEALTH=Good [ 1.547543] power_supply test_battery: prop PRESENT=1 [ 1.548212] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.548979] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.549788] power_supply test_battery: prop CHARGE_FULL=100 [ 1.550510] power_supply test_battery: prop CHARGE_NOW=50 [ 1.551223] power_supply test_battery: prop CAPACITY=50 [ 1.551902] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.552683] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.553476] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.554273] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.555105] power_supply test_battery: prop MANUFACTURER=Linux [ 1.555867] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc2-next-20140214-03226-gda8d308 [ 1.556999] power_supply test_battery: prop TEMP=26 [ 1.557630] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.558453] power_supply test_usb: uevent [ 1.559002] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.559762] power_supply test_usb: prop ONLINE=1 [ 1.560363] power_supply test_usb: power_supply_changed [ 1.561345] w83781d: Detection failed at step 2 [ 1.562163] applesmc: supported laptop not found! [ 1.562773] applesmc: driver init failed (ret=-19)! [ 1.563625] f71882fg: Not a Fintek device [ 1.564184] f71882fg: Not a Fintek device [ 1.565215] pc87360: PC8736x not detected, module not inserted [ 1.566268] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 1.567225] sdhci: Secure Digital Host Controller Interface driver [ 1.567762] sdhci: Copyright(c) Pierre Ossman [ 1.568172] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.568896] power_supply test_usb: power_supply_changed_work [ 1.569631] power_supply test_usb: power_supply_update_gen_leds 1 [ 1.570401] power_supply test_usb: uevent [ 1.570916] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.571662] power_supply test_usb: prop ONLINE=1 [ 1.572659] ledtrig-cpu: registered to indicate activity on CPUs [ 1.573678] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.574712] hidraw: raw HID events driver (C) Jiri Kosina [ 1.576105] hdaps: supported laptop not found! [ 1.576699] hdaps: driver init failed (ret=-19)! [ 1.577856] fake-fmc-carrier: mezzanine 0 [ 1.578418] Manufacturer: fake-vendor [ 1.578951] Product name: fake-design-for-testing [ 1.579720] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 1.580636] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95 [ 1.581667] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 1.582608] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 1.583951] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 1.584941] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 1.591592] sc6000: specify IO port [ 1.596761] isa ad1848.0: please specify port [ 1.602130] isa azt1605.0: please specify port [ 1.604506] isa azt2316.0: please specify port [ 1.606609] ALSA gus_main.c:180 gus: can't grab synth port 0x320 [ 2.362893] ALSA jazz16.c:191 please specify port [ 2.366862] [ 2.366862] printing PIC contents [ 2.367294] ... PIC IMR: ffff [ 2.367555] ... PIC IRR: 1113 [ 2.367820] ... PIC ISR: 0000 [ 2.368083] ... PIC ELCR: 0c00 [ 2.368373] printing local APIC contents on CPU#0/0: [ 2.369095] ... APIC ID: 00000000 (0) [ 2.369460] ... APIC VERSION: 00050014 [ 2.369780] ... APIC TASKPRI: 00000000 (00) [ 2.370303] ... APIC PROCPRI: 00000000 [ 2.370466] ... APIC LDR: 01000000 [ 2.370466] ... APIC DFR: ffffffff [ 2.370466] ... APIC SPIV: 000001ff [ 2.370466] ... APIC ISR field: [ 2.370466] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.370466] ... APIC TMR field: [ 2.370466] 0000000002000000000000000000000000000000000000000000000000000000 [ 2.370466] ... APIC IRR field: [ 2.370466] 0000000000000000000000000000000000000000000000000000000000008000 [ 2.370466] ... APIC ESR: 00000000 [ 2.370466] ... APIC ICR: 000008fd [ 2.370466] ... APIC ICR2: 02000000 [ 2.370466] ... APIC LVTT: 000200ef [ 2.370466] ... APIC LVTPC: 00010000 [ 2.370466] ... APIC LVT0: 00010700 [ 2.370466] ... APIC LVT1: 00000400 [ 2.370466] ... APIC LVTERR: 000000fe [ 2.370466] ... APIC TMICT: 0003d0ab [ 2.370466] ... APIC TMCCT: 000337da [ 2.370466] ... APIC TDCR: 00000003 [ 2.370466] [ 2.379844] number of MP IRQ sources: 15. [ 2.380338] number of IO-APIC #0 registers: 24. [ 2.380890] testing the IO APIC....................... [ 2.381583] IO APIC #0...... [ 2.381949] .... register #00: 00000000 [ 2.382437] ....... : physical APIC id: 00 [ 2.382970] ....... : Delivery Type: 0 [ 2.383337] ....... : LTS : 0 [ 2.383669] .... register #01: 00170011 [ 2.383988] ....... : max redirection entries: 17 [ 2.384503] ....... : PRQ implemented: 0 [ 2.385030] ....... : IO APIC version: 11 [ 2.385573] .... register #02: 00000000 [ 2.386062] ....... : arbitration: 00 [ 2.386585] .... IRQ redirection table: [ 2.387105] 1 0 0 0 0 0 0 00 [ 2.387683] 0 0 0 0 0 1 1 31 [ 2.388264] 0 0 0 0 0 1 1 30 [ 2.388839] 0 0 0 0 0 1 1 33 [ 2.389344] 1 0 0 0 0 1 1 34 [ 2.389730] 1 1 0 0 0 1 1 35 [ 2.390329] 0 0 0 0 0 1 1 36 [ 2.390926] 0 0 0 0 0 1 1 37 [ 2.391538] 0 0 0 0 0 1 1 38 [ 2.392124] 0 1 0 0 0 1 1 39 [ 2.392624] 1 1 0 0 0 1 1 3A [ 2.393007] 1 1 0 0 0 1 1 3B [ 2.393389] 0 0 0 0 0 1 1 3C [ 2.393826] 0 0 0 0 0 1 1 3D [ 2.394439] 0 0 0 0 0 1 1 3E [ 2.395054] 0 0 0 0 0 1 1 3F [ 2.395640] 1 0 0 0 0 0 0 00 [ 2.396221] 1 0 0 0 0 0 0 00 [ 2.396800] 1 0 0 0 0 0 0 00 [ 2.397384] 1 0 0 0 0 0 0 00 [ 2.397978] 1 0 0 0 0 0 0 00 [ 2.398581] 1 0 0 0 0 0 0 00 [ 2.399006] 1 0 0 0 0 0 0 00 [ 2.399429] 1 0 0 0 0 0 0 00 [ 2.400001] IRQ to pin mappings: [ 2.400410] IRQ0 -> 0:2 [ 2.400759] IRQ1 -> 0:1 [ 2.401108] IRQ3 -> 0:3 [ 2.401461] IRQ4 -> 0:4 [ 2.401824] IRQ5 -> 0:5 [ 2.402065] IRQ6 -> 0:6 [ 2.402309] IRQ7 -> 0:7 [ 2.402590] IRQ8 -> 0:8 [ 2.402835] IRQ9 -> 0:9 [ 2.403077] IRQ10 -> 0:10 [ 2.403450] IRQ11 -> 0:11 [ 2.403819] IRQ12 -> 0:12 [ 2.404195] IRQ13 -> 0:13 [ 2.404574] IRQ14 -> 0:14 [ 2.404949] IRQ15 -> 0:15 [ 2.405319] .................................... done. [ 2.405948] Using IPI No-Shortcut mode [ 10.376683] Unregister pv shared memory for cpu 0 [ 10.388424] BUG: unable to handle kernel NULL pointer dereference at 00000040 [ 10.389307] IP: [] pick_next_task+0xa/0x48 [ 10.389880] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 10.390617] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 10.390948] CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.14.0-rc2-next-20140214-03226-gda8d308 #1 [ 10.390948] task: cc05d580 ti: cc09c000 task.ti: cc09c000 [ 10.390948] EIP: 0060:[] EFLAGS: 00010046 CPU: 0 [ 10.390948] EIP is at pick_next_task+0xa/0x48 [ 10.390948] EAX: cfcae100 EBX: cfcae100 ECX: 00000002 EDX: 00000000 [ 10.390948] ESI: cfcae100 EDI: 00000000 EBP: cc09ddc0 ESP: cc09ddb4 [ 10.390948] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 10.390948] CR0: 8005003b CR2: 00000040 CR3: 0cd73000 CR4: 000006b0 [ 10.390948] Stack: [ 10.390948] cfcae100 cfcae100 ccc5b930 cc09dde4 cc661de5 00000200 cc05d580 00000082 [ 10.390948] 00000000 ccc5c864 00000000 ccc5b930 cc09de00 cc659574 00000000 00000008 [ 10.390948] ffffffff cc055e6c 00000000 cc09de14 cc65982c fffffffb 00000000 00000000 [ 10.390948] Call Trace: [ 10.390948] [] migration_call+0x10b/0x188 [ 10.390948] [] notifier_call_chain+0x32/0x4b [ 10.390948] [] __raw_notifier_call_chain+0x1e/0x23 [ 10.390948] [] __cpu_notify+0x24/0x3e [ 10.390948] [] cpu_notify+0x18/0x1a [ 10.390948] [] take_cpu_down+0x22/0x32 [ 10.390948] [] multi_cpu_stop+0x80/0xce [ 10.390948] [] ? __stop_cpus+0x55/0x55 [ 10.390948] [] cpu_stopper_thread+0x80/0x111 [ 10.390948] [] ? finish_task_switch+0x33/0xba [ 10.390948] [] ? __schedule+0x377/0x55e [ 10.390948] [] ? __lock_acquire.isra.27+0x1be/0x4dd [ 10.390948] [] ? lock_acquire+0x93/0xe0 [ 10.390948] [] ? lock_release+0x16d/0x1b1 [ 10.390948] [] ? _raw_spin_unlock_irqrestore+0x44/0x4f [ 10.390948] [] smpboot_thread_fn+0x15d/0x173 [ 10.390948] [] ? smpboot_unpark_thread+0x2e/0x2e [ 10.390948] [] kthread+0x8d/0x92 [ 10.390948] [] ? __queue_work+0xb6/0x205 [ 10.390948] [] ret_from_kernel_thread+0x1b/0x28 [ 10.390948] [] ? __kthread_parkme+0x55/0x55 [ 10.390948] Code: 00 ba 01 00 00 00 89 f0 eb 0e 89 f0 e8 b9 4f 3a 00 ba 01 00 00 00 89 d8 e8 04 57 3a 00 5b 5e 5d c3 55 89 e5 57 89 d7 56 89 c6 53 <81> 7a 40 74 03 a1 cc 74 07 bb a0 04 a1 cc eb 23 8b 40 6c 39 46 [ 10.390948] EIP: [] pick_next_task+0xa/0x48 SS:ESP 0068:cc09ddb4 [ 10.390948] CR2: 0000000000000040 [ 10.390948] ---[ end trace a546538b11268dcc ]--- [ 10.390948] Kernel panic - not syncing: Fatal exception [ 10.390948] Kernel Offset: 0xb600000 from 0xc1000000 (relocation range: 0xc0000000-0xd07fdfff) [ 10.390948] Rebooting in 10 seconds.. Elapsed time: 15 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-x1-02152208/da8d308fbdb8360078786b3e125238122c4fc611/vmlinuz-3.14.0-rc2-next-20140214-03226-gda8d308 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-x1-02152208/next:master/.vmlinuz-da8d308fbdb8360078786b3e125238122c4fc611-20140215221646-9-lkp-sbx04 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x1-02152208/da8d308fbdb8360078786b3e125238122c4fc611/vmlinuz-3.14.0-rc2-next-20140214-03226-gda8d308' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::7988-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-lkp-sbx04-56 -serial file:/dev/shm/kboot/serial-yocto-lkp-sbx04-56 -daemonize -display none -monitor null