| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1392823951-26053-2-git-send-email-alexandre.belloni@free-electrons.com>
Date: Wed, 19 Feb 2014 16:32:24 +0100
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
b.brezillon@...rkiz.com,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support
This adds preliminary DT support for the at91sam9rl.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/boot/dts/at91sam9rl.dtsi | 628 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/at91sam9rl.c | 16 +
2 files changed, 644 insertions(+)
create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
new file mode 100644
index 000000000000..9a6208b046b6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -0,0 +1,628 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@...e-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Atmel AT91SAM9RL family SoC";
+ compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tcb0: timer@...a0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0
+ 17 IRQ_TYPE_LEVEL_HIGH 0
+ 18 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ mmc0: mmc@...a4000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffa4000 0x600>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ i2c0: i2c@...a8000 {
+ compatible = "atmel,at91sam9260-i2c";
+ reg = <0xfffa8000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...ac000 {
+ compatible = "atmel,at91sam9260-i2c";
+ reg = <0xfffac000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart0: serial@...b0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ status = "disabled";
+ };
+
+ usart1: serial@...b4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ status = "disabled";
+ };
+
+ usart2: serial@...b8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "disabled";
+ };
+
+ usart3: serial@...bc000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffbc000 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+
+ ssc0: ssc@...c0000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc0000 0x4000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
+ ssc1: ssc@...c4000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disabled";
+ };
+
+ spi0: spi@...cc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ adc0: adc@...d0000 {
+ compatible = "atmel,at91sam9260-adc";
+ reg = <0xfffd0000 0x100>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ atmel,adc-use-external-triggers;
+ atmel,adc-channels-used = <0xf>;
+ atmel,adc-vref = <3300>;
+ atmel,adc-num-channels = <4>;
+ atmel,adc-startup-time = <15>;
+ atmel,adc-channel-base = <0x30>;
+ atmel,adc-drdy-mask = <0x10000>;
+ atmel,adc-status-register = <0x1c>;
+ atmel,adc-trigger-register = <0x04>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-use-res = "highres";
+
+ trigger@0 {
+ trigger-name = "timer-counter-0";
+ trigger-value = <0x1>;
+ };
+ trigger@1 {
+ trigger-name = "timer-counter-1";
+ trigger-value = <0x3>;
+ };
+
+ trigger@2 {
+ trigger-name = "timer-counter-2";
+ trigger-value = <0x5>;
+ };
+
+ trigger@3 {
+ trigger-name = "external";
+ trigger-value = <0x13>;
+ trigger-external;
+ };
+ };
+
+ usb0: gadget@...d4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffd4000 0x4000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ status = "disabled";
+ };
+
+ ramc0: ramc@...fea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ aic: interrupt-controller@...ff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
+ };
+
+ dbgu: serial@...ff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "disabled";
+ };
+
+ pinctrl@...ff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xe05c6738 /* pioA */
+ 0xffffffff 0x0000c780 /* pioB */
+ 0xffffffff 0xe3ffff0e /* pioC */
+ 0x003fffff 0x0001ff3c /* pioD */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+ atmel,pins =
+ <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_dcd: usart0_dcd-0 {
+ atmel,pins =
+ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_ri: usart0_ri-0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_sck: usart0_sck-0 {
+ atmel,pins =
+ <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ /*TODO check pullup necessary*/
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_sck: usart1_sck-0 {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_sck: usart2_sck-0 {
+ atmel,pins =
+ <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_sck: usart3_sck-0 {
+ atmel,pins =
+ <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+ atmel,pins =
+ <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_nand0_oe_we: nand_oe_we-0 {
+ atmel,pins =
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_nand0_cs: nand_cs-0 {
+ atmel,pins =
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2c_gpio0 {
+ pinctrl_i2c_gpio0: i2c_gpio0-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+ AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
+ };
+
+ i2c_gpio1 {
+ pinctrl_i2c_gpio1: i2c_gpio1-0 {
+ atmel,pins =
+ <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+ AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
+ };
+
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ pioA: gpio@...ff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@...ff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@...ff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@...ffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmc: pmc@...ffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@...ffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@...ffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pit: timer@...ffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ };
+
+ watchdog@...ffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@...00000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe800 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ gpios = <&pioD 17 GPIO_ACTIVE_HIGH
+ &pioB 6 GPIO_ACTIVE_HIGH
+ 0
+ >;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+ &pioA 24 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio0>;
+ status = "disabled";
+ };
+
+ i2c@1 {
+ compatible = "i2c-gpio";
+ gpios = <&pioD 10 GPIO_ACTIVE_HIGH /* sda */
+ &pioD 11 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio1>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 3651517abedf..d6ee8bb47213 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -196,6 +196,22 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
+ /* more lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists