| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5304E56E.9030704@overkiz.com>
Date: Wed, 19 Feb 2014 18:10:06 +0100
From: Boris BREZILLON <b.brezillon@...rkiz.com>
To: Jean-Jacques Hiblot <jjhiblot@...il.com>
CC: Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support
On 19/02/2014 17:19, Jean-Jacques Hiblot wrote:
> Hi boris,
>
> I don't know if splitting the patch is needed.
> For the 9261 I was
> asked to keep the patch number low
Okay, but then you mix DT modifications with source code modification.
IMHO, we should keep these modifications in different patches and prefix
patch subject differently :
- "ARM: at91/dt" or "ARM: at91: dt: " : for DT modifications
- "ARM: at91" : for SoC source code modifications
Note that I might have done the exact same thing (mixing source and DT
modifications in the same patch) in my previous submissions :-).
Nicolas, what do you think ?
> and the board won't boot up if the
> one of the 2 patches is missing.
That's not exactly true: if you add the clk lookup entries and then add
at91sam9rl DT support, the board will boot as expected.
>
> Jean-Jacques
>
> 2014-02-19 17:01 GMT+01:00 Boris BREZILLON <b.brezillon@...rkiz.com>:
>> Hi Alexandre,
>>
>>
>> On 19/02/2014 16:32, Alexandre Belloni wrote:
>>> This adds preliminary DT support for the at91sam9rl.
>>>
>>> Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
>>> ---
>>> arch/arm/boot/dts/at91sam9rl.dtsi | 628
>>> ++++++++++++++++++++++++++++++++++++++
>>> arch/arm/mach-at91/at91sam9rl.c | 16 +
>>> 2 files changed, 644 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi
>>> b/arch/arm/boot/dts/at91sam9rl.dtsi
>>> new file mode 100644
>>> index 000000000000..9a6208b046b6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9rl.dtsi
>>> @@ -0,0 +1,628 @@
>>> +/*
>>> + * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
>>> + *
>>> + * Copyright (C) 2014 Alexandre Belloni
>>> <alexandre.belloni@...e-electrons.com>
>>> + *
>>> + * Licensed under GPLv2 or later.
>>> + */
>>> +
>>> +#include "skeleton.dtsi"
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +
>>> +/ {
>>> + model = "Atmel AT91SAM9RL family SoC";
>>> + compatible = "atmel,at91sam9rl", "atmel,at91sam9";
>>> + interrupt-parent = <&aic>;
>>> +
>>> + aliases {
>>> + serial0 = &dbgu;
>>> + serial1 = &usart0;
>>> + serial2 = &usart1;
>>> + serial3 = &usart2;
>>> + serial4 = &usart3;
>>> + gpio0 = &pioA;
>>> + gpio1 = &pioB;
>>> + gpio2 = &pioC;
>>> + gpio3 = &pioD;
>>> + tcb0 = &tcb0;
>>> + i2c0 = &i2c0;
>>> + i2c1 = &i2c1;
>>> + ssc0 = &ssc0;
>>> + ssc1 = &ssc1;
>>> + };
>>> +
>>> + cpus {
>>> + #address-cells = <0>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu {
>>> + compatible = "arm,arm926ej-s";
>>> + device_type = "cpu";
>>> + };
>>> + };
>>> +
>>> + memory {
>>> + reg = <0x20000000 0x04000000>;
>>> + };
>>> +
>>> + ahb {
>>> + compatible = "simple-bus";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + apb {
>>> + compatible = "simple-bus";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + tcb0: timer@...a0000 {
>>> + compatible = "atmel,at91rm9200-tcb";
>>> + reg = <0xfffa0000 0x100>;
>>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0
>>> + 17 IRQ_TYPE_LEVEL_HIGH 0
>>> + 18 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + };
>>> +
>>> + mmc0: mmc@...a4000 {
>>> + compatible = "atmel,hsmci";
>>> + reg = <0xfffa4000 0x600>;
>>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + pinctrl-names = "default";
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c0: i2c@...a8000 {
>>> + compatible = "atmel,at91sam9260-i2c";
>>> + reg = <0xfffa8000 0x100>;
>>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c1: i2c@...ac000 {
>>> + compatible = "atmel,at91sam9260-i2c";
>>> + reg = <0xfffac000 0x100>;
>>> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + usart0: serial@...b0000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xfffb0000 0x200>;
>>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + usart1: serial@...b4000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xfffb4000 0x200>;
>>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart1>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + usart2: serial@...b8000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xfffb8000 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart2>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + usart3: serial@...bc000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xfffbc000 0x200>;
>>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + ssc0: ssc@...c0000 {
>>> + compatible = "atmel,at91rm9200-ssc";
>>> + reg = <0xfffc0000 0x4000>;
>>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_ssc0_tx
>>> &pinctrl_ssc0_rx>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + ssc1: ssc@...c4000 {
>>> + compatible = "atmel,at91rm9200-ssc";
>>> + reg = <0xfffc4000 0x4000>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_ssc1_tx
>>> &pinctrl_ssc1_rx>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi0: spi@...cc000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91rm9200-spi";
>>> + reg = <0xfffcc000 0x200>;
>>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_spi0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + adc0: adc@...d0000 {
>>> + compatible = "atmel,at91sam9260-adc";
>>> + reg = <0xfffd0000 0x100>;
>>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + atmel,adc-use-external-triggers;
>>> + atmel,adc-channels-used = <0xf>;
>>> + atmel,adc-vref = <3300>;
>>> + atmel,adc-num-channels = <4>;
>>> + atmel,adc-startup-time = <15>;
>>> + atmel,adc-channel-base = <0x30>;
>>> + atmel,adc-drdy-mask = <0x10000>;
>>> + atmel,adc-status-register = <0x1c>;
>>> + atmel,adc-trigger-register = <0x04>;
>>> + atmel,adc-res = <8 10>;
>>> + atmel,adc-res-names = "lowres", "highres";
>>> + atmel,adc-use-res = "highres";
>>> +
>>> + trigger@0 {
>>> + trigger-name = "timer-counter-0";
>>> + trigger-value = <0x1>;
>>> + };
>>> + trigger@1 {
>>> + trigger-name = "timer-counter-1";
>>> + trigger-value = <0x3>;
>>> + };
>>> +
>>> + trigger@2 {
>>> + trigger-name = "timer-counter-2";
>>> + trigger-value = <0x5>;
>>> + };
>>> +
>>> + trigger@3 {
>>> + trigger-name = "external";
>>> + trigger-value = <0x13>;
>>> + trigger-external;
>>> + };
>>> + };
>>> +
>>> + usb0: gadget@...d4000 {
>>> + compatible = "atmel,at91rm9200-udc";
>>> + reg = <0xfffd4000 0x4000>;
>>> + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + ramc0: ramc@...fea00 {
>>> + compatible = "atmel,at91sam9260-sdramc";
>>> + reg = <0xffffea00 0x200>;
>>> + };
>>> +
>>> + aic: interrupt-controller@...ff000 {
>>> + #interrupt-cells = <3>;
>>> + compatible = "atmel,at91rm9200-aic";
>>> + interrupt-controller;
>>> + reg = <0xfffff000 0x200>;
>>> + atmel,external-irqs = <31>;
>>> + };
>>> +
>>> + dbgu: serial@...ff200 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xfffff200 0x200>;
>>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_dbgu>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + pinctrl@...ff400 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "atmel,at91rm9200-pinctrl",
>>> "simple-bus";
>>> + ranges = <0xfffff400 0xfffff400 0x800>;
>>> +
>>> + atmel,mux-mask = <
>>> + /* A B */
>>> + 0xffffffff 0xe05c6738 /* pioA */
>>> + 0xffffffff 0x0000c780 /* pioB */
>>> + 0xffffffff 0xe3ffff0e /* pioC */
>>> + 0x003fffff 0x0001ff3c /* pioD */
>>> + >;
>>> +
>>> + /* shared pinctrl settings */
>>> + dbgu {
>>> + pinctrl_dbgu: dbgu-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 21
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOA 22
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
>>> + };
>>> + };
>>> +
>>> + usart0 {
>>> + pinctrl_usart0: usart0-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 6
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOA 7
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
>>> + };
>>> +
>>> + pinctrl_usart0_rts: usart0_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 9
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart0_cts: usart0_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 10
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart0_dtr_dsr:
>>> usart0_dtr_dsr-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 14
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOD 15
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart0_dcd: usart0_dcd-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 16
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart0_ri: usart0_ri-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 17
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart0_sck: usart0_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 8
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + usart1 {
>>> + pinctrl_usart1: usart1-0 {
>>> + atmel,pins =
>>> + /*TODO check pullup
>>> necessary*/
>>> + <AT91_PIOA 11
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOA 12
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart1_rts: usart1_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 18
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart1_cts: usart1_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 19
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart1_sck: usart1_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 2
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + usart2 {
>>> + pinctrl_usart2: usart2-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 13
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOA 14
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart2_rts: usart2_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 29
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart2_cts: usart2_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 30
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart2_sck: usart2_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 9
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + usart3 {
>>> + pinctrl_usart3: usart3-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 0
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOB 1
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart3_rts: usart3_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 4
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart3_cts: usart3_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 3
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_usart3_sck: usart3_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 20
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + nand {
>>> + pinctrl_nand: nand-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 17
>>> AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
>>> + AT91_PIOB 6
>>> AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
>>> + };
>>> +
>>> + pinctrl_nand0_ale_cle:
>>> nand_ale_cle-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 2
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOB 3
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_nand0_oe_we: nand_oe_we-0
>>> {
>>> + atmel,pins =
>>> + <AT91_PIOB 4
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOB 5
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_nand0_cs: nand_cs-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 6
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + mmc0 {
>>> + pinctrl_mmc0_clk: mmc0_clk-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 2
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_mmc0_slot0_cmd_dat0:
>>> mmc0_slot0_cmd_dat0-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 0
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOA 1
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
>>> + };
>>> +
>>> + pinctrl_mmc0_slot0_dat1_3:
>>> mmc0_slot0_dat1_3-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 3
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOA 4
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP
>>> + AT91_PIOA 5
>>> AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
>>> + };
>>> + };
>>> +
>>> + ssc0 {
>>> + pinctrl_ssc0_tx: ssc0_tx-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 15
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOC 0
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOC 1
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_ssc0_rx: ssc0_rx-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 10
>>> AT91_PERIPH_B AT91_PINCTRL_NONE
>>> + AT91_PIOA 16
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOA 22
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + ssc1 {
>>> + pinctrl_ssc1_tx: ssc1_tx-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 13
>>> AT91_PERIPH_B AT91_PINCTRL_NONE
>>> + AT91_PIOA 29
>>> AT91_PERIPH_B AT91_PINCTRL_NONE
>>> + AT91_PIOA 30
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_ssc1_rx: ssc1_rx-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 8
>>> AT91_PERIPH_B AT91_PINCTRL_NONE
>>> + AT91_PIOA 9
>>> AT91_PERIPH_B AT91_PINCTRL_NONE
>>> + AT91_PIOA 14
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + spi0 {
>>> + pinctrl_spi0: spi0-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 25
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOA 26
>>> AT91_PERIPH_A AT91_PINCTRL_NONE
>>> + AT91_PIOA 27
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + i2c_gpio0 {
>>> + pinctrl_i2c_gpio0: i2c_gpio0-0 {
>>> + atmel,pins =
>>> + <AT91_PIOA 23
>>> AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
>>> + AT91_PIOA 24
>>> AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
>>> + };
>>> + };
>>> +
>>> + i2c_gpio1 {
>>> + pinctrl_i2c_gpio1: i2c_gpio1-0 {
>>> + atmel,pins =
>>> + <AT91_PIOD 10
>>> AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
>>> + AT91_PIOD 11
>>> AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
>>> + };
>>> + };
>>> +
>>> + tcb0 {
>>> + pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
>>> + atmel,pins = <AT91_PIOA 3
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
>>> + atmel,pins = <AT91_PIOC 31
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
>>> + atmel,pins = <AT91_PIOD 21
>>> AT91_PERIPH_A AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
>>> + atmel,pins = <AT91_PIOA 4
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
>>> + atmel,pins = <AT91_PIOC 29
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
>>> + atmel,pins = <AT91_PIOD 10
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
>>> + atmel,pins = <AT91_PIOA 5
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
>>> + atmel,pins = <AT91_PIOC 30
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> +
>>> + pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
>>> + atmel,pins = <AT91_PIOD 11
>>> AT91_PERIPH_B AT91_PINCTRL_NONE>;
>>> + };
>>> + };
>>> +
>>> + pioA: gpio@...ff400 {
>>> + compatible =
>>> "atmel,at91rm9200-gpio";
>>> + reg = <0xfffff400 0x200>;
>>> + interrupts = <2
>>> IRQ_TYPE_LEVEL_HIGH 1>;
>>> + #gpio-cells = <2>;
>>> + gpio-controller;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> + };
>>> +
>>> + pioB: gpio@...ff600 {
>>> + compatible =
>>> "atmel,at91rm9200-gpio";
>>> + reg = <0xfffff600 0x200>;
>>> + interrupts = <3
>>> IRQ_TYPE_LEVEL_HIGH 1>;
>>> + #gpio-cells = <2>;
>>> + gpio-controller;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> + };
>>> +
>>> + pioC: gpio@...ff800 {
>>> + compatible =
>>> "atmel,at91rm9200-gpio";
>>> + reg = <0xfffff800 0x200>;
>>> + interrupts = <4
>>> IRQ_TYPE_LEVEL_HIGH 1>;
>>> + #gpio-cells = <2>;
>>> + gpio-controller;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> + };
>>> +
>>> + pioD: gpio@...ffa00 {
>>> + compatible =
>>> "atmel,at91rm9200-gpio";
>>> + reg = <0xfffffa00 0x200>;
>>> + interrupts = <5
>>> IRQ_TYPE_LEVEL_HIGH 1>;
>>> + #gpio-cells = <2>;
>>> + gpio-controller;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> + };
>>> + };
>>> +
>>> + pmc: pmc@...ffc00 {
>>> + compatible = "atmel,at91rm9200-pmc";
>>> + reg = <0xfffffc00 0x100>;
>>> + };
>>> +
>>> + rstc@...ffd00 {
>>> + compatible = "atmel,at91sam9260-rstc";
>>> + reg = <0xfffffd00 0x10>;
>>> + };
>>> +
>>> + shdwc@...ffd10 {
>>> + compatible = "atmel,at91sam9260-shdwc";
>>> + reg = <0xfffffd10 0x10>;
>>> + };
>>> +
>>> + pit: timer@...ffd30 {
>>> + compatible = "atmel,at91sam9260-pit";
>>> + reg = <0xfffffd30 0xf>;
>>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + };
>>> +
>>> + watchdog@...ffd40 {
>>> + compatible = "atmel,at91sam9260-wdt";
>>> + reg = <0xfffffd40 0x10>;
>>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + nand0: nand@...00000 {
>>> + compatible = "atmel,at91rm9200-nand";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + reg = <0x40000000 0x10000000
>>> + 0xffffe800 0x200
>>> + >;
>>> + atmel,nand-addr-offset = <21>;
>>> + atmel,nand-cmd-offset = <22>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_nand>;
>>> + gpios = <&pioD 17 GPIO_ACTIVE_HIGH
>>> + &pioB 6 GPIO_ACTIVE_HIGH
>>> + 0
>>> + >;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + i2c@0 {
>>> + compatible = "i2c-gpio";
>>> + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
>>> + &pioA 24 GPIO_ACTIVE_HIGH /* scl */
>>> + >;
>>> + i2c-gpio,sda-open-drain;
>>> + i2c-gpio,scl-open-drain;
>>> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c_gpio0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c@1 {
>>> + compatible = "i2c-gpio";
>>> + gpios = <&pioD 10 GPIO_ACTIVE_HIGH /* sda */
>>> + &pioD 11 GPIO_ACTIVE_HIGH /* scl */
>>> + >;
>>> + i2c-gpio,sda-open-drain;
>>> + i2c-gpio,scl-open-drain;
>>> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c_gpio1>;
>>> + status = "disabled";
>>> + };
>>> +};
>>> diff --git a/arch/arm/mach-at91/at91sam9rl.c
>>> b/arch/arm/mach-at91/at91sam9rl.c
>>> index 3651517abedf..d6ee8bb47213 100644
>>> --- a/arch/arm/mach-at91/at91sam9rl.c
>>> +++ b/arch/arm/mach-at91/at91sam9rl.c
>>
>> I would have splitted this patch in 2 different patches:
>> 1) define at91sam9rl DT clock lookup entries
>> 2) add at91sam9rl DT SoC support
>>
>>
>>> @@ -196,6 +196,22 @@ static struct clk_lookup periph_clocks_lookups[] = {
>>> CLKDEV_CON_ID("pioB", &pioB_clk),
>>> CLKDEV_CON_ID("pioC", &pioC_clk),
>>> CLKDEV_CON_ID("pioD", &pioD_clk),
>>> + /* more lookup table for DT entries */
>>> + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
>>> + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
>>> + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
>>> + CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
>>> + CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
>>> + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
>>> + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
>>> + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
>>> + CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
>>> + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
>>> };
>>> static struct clk_lookup usart_clocks_lookups[] = {
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists