| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1392907389-21798-5-git-send-email-geert@linux-m68k.org>
Date: Thu, 20 Feb 2014 15:43:03 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Mark Brown <broonie@...nel.org>
Cc: Takashi Yoshii <takasi-y@....dti.ne.jp>,
Magnus Damm <magnus.damm@...il.com>, linux-spi@...r.kernel.org,
linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
Subject: [PATCH 04/10] spi: sh-msiof: Add more register documentation
From: Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@...ux-m68k.org>
---
drivers/spi/spi-sh-msiof.c | 152 +++++++++++++++++++++++++++++---------------
1 file changed, 100 insertions(+), 52 deletions(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index af9f2db41b16..79e14586049b 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -41,32 +41,80 @@ struct sh_msiof_spi_priv {
int rx_fifo_size;
};
-#define TMDR1 0x00
-#define TMDR2 0x04
-#define TMDR3 0x08
-#define RMDR1 0x10
-#define RMDR2 0x14
-#define RMDR3 0x18
-#define TSCR 0x20
-#define RSCR 0x22
-#define CTR 0x28
-#define FCTR 0x30
-#define STR 0x40
-#define IER 0x44
-#define TDR1 0x48
-#define TDR2 0x4c
-#define TFDR 0x50
-#define RDR1 0x58
-#define RDR2 0x5c
-#define RFDR 0x60
-
-#define CTR_TSCKE (1 << 15)
-#define CTR_TFSE (1 << 14)
-#define CTR_TXE (1 << 9)
-#define CTR_RXE (1 << 8)
-
-#define STR_TEOF (1 << 23)
-#define STR_REOF (1 << 7)
+#define TMDR1 0x00 /* Transmit Mode Register 1 */
+#define TMDR2 0x04 /* Transmit Mode Register 2 */
+#define TMDR3 0x08 /* Transmit Mode Register 3 */
+#define RMDR1 0x10 /* Receive Mode Register 1 */
+#define RMDR2 0x14 /* Receive Mode Register 2 */
+#define RMDR3 0x18 /* Receive Mode Register 3 */
+#define TSCR 0x20 /* Transmit Clock Select Register */
+#define RSCR 0x22 /* Receive Clock Select Register (SH, A1, APE6) */
+#define CTR 0x28 /* Control Register */
+#define FCTR 0x30 /* FIFO Control Register */
+#define STR 0x40 /* Status Register */
+#define IER 0x44 /* Interrupt Enable Register */
+#define TDR1 0x48 /* Transmit Control Data Register 1 (SH, A1) */
+#define TDR2 0x4c /* Transmit Control Data Register 2 (SH, A1) */
+#define TFDR 0x50 /* Transmit FIFO Data Register */
+#define RDR1 0x58 /* Receive Control Data Register 1 (SH, A1) */
+#define RDR2 0x5c /* Receive Control Data Register 2 (SH, A1) */
+#define RFDR 0x60 /* Receive FIFO Data Register */
+
+/* TMDR1 and RMDR1 */
+#define MDR1_TRMD 0x80000000 /* Transfer Mode (1 = Master mode) */
+#define MDR1_SYNCMD_MASK 0x30000000 /* SYNC Mode */
+#define MDR1_SYNCMD_SPI 0x20000000 /* Level mode/SPI */
+#define MDR1_SYNCMD_LR 0x30000000 /* L/R mode */
+#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */
+#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */
+#define MDR1_FLD_MASK 0x000000c0 /* Frame Sync Signal Interval (0-3) */
+#define MDR1_FLD_SHIFT 2
+#define MDR1_XXSTP 0x00000001 /* Transmission/Reception Stop on FIFO */
+/* TMDR1 */
+#define TMDR1_PCON 0x40000000 /* Transfer Signal Connection */
+
+/* TMDR2 and RMDR2 */
+#define MDR2_BITLEN1(i) (((i) - 1) << 24) /* Data Size (8-32 bits) */
+#define MDR2_WDLEN1(i) (((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */
+#define MDR2_GRPMASK1 0x00000001 /* Group Output Mask 1 (SH, A1) */
+
+/* TSCR and RSCR */
+#define SCR_BRPS_MASK 0x1f00 /* Prescaler Setting (1-32) */
+#define SCR_BRPS(i) (((i) - 1) << 8)
+#define SCR_BRDV_MASK 0x0007 /* Baud Rate Generator's Division Ratio */
+#define SCR_BRDV_DIV_2 0x0000
+#define SCR_BRDV_DIV_4 0x0001
+#define SCR_BRDV_DIV_8 0x0002
+#define SCR_BRDV_DIV_16 0x0003
+#define SCR_BRDV_DIV_32 0x0004
+#define SCR_BRDV_DIV_1 0x0007
+
+/* CTR */
+#define CTR_TSCKIZ_MASK 0xc0000000 /* Transmit Clock I/O Polarity Select */
+#define CTR_TSCKIZ_SCK 0x80000000 /* Disable SCK when TX disabled */
+#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */
+#define CTR_RSCKIZ_MASK 0x30000000 /* Receive Clock Polarity Select */
+#define CTR_RSCKIZ_SCK 0x20000000 /* Must match CTR_TSCKIZ_SCK */
+#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */
+#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */
+#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */
+#define CTR_TXDIZ_MASK 0x00c00000 /* Pin Output When TX is Disabled */
+#define CTR_TXDIZ_LOW 0x00000000 /* 0 */
+#define CTR_TXDIZ_HIGH 0x00400000 /* 1 */
+#define CTR_TXDIZ_HIZ 0x00800000 /* High-impedance */
+#define CTR_TSCKE 0x00008000 /* Transmit Serial Clock Output Enable */
+#define CTR_TFSE 0x00004000 /* Transmit Frame Sync Signal Output Enable */
+#define CTR_TXE 0x00000200 /* Transmit Enable */
+#define CTR_RXE 0x00000100 /* Receive Enable */
+
+/* STR and IER */
+#define STR_TEOF 0x00800000 /* Frame Transmission End */
+#define STR_REOF 0x00000080 /* Frame Reception End */
+
+
+#define DEFAULT_TX_FIFO_SIZE 64
+#define DEFAULT_RX_FIFO_SIZE 64
+
static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs)
{
@@ -130,17 +178,17 @@ static struct {
unsigned short div;
unsigned short scr;
} const sh_msiof_spi_clk_table[] = {
- { 1, 0x0007 },
- { 2, 0x0000 },
- { 4, 0x0001 },
- { 8, 0x0002 },
- { 16, 0x0003 },
- { 32, 0x0004 },
- { 64, 0x1f00 },
- { 128, 0x1f01 },
- { 256, 0x1f02 },
- { 512, 0x1f03 },
- { 1024, 0x1f04 },
+ { 1, SCR_BRPS( 1) | SCR_BRDV_DIV_1 },
+ { 2, SCR_BRPS( 1) | SCR_BRDV_DIV_2 },
+ { 4, SCR_BRPS( 1) | SCR_BRDV_DIV_4 },
+ { 8, SCR_BRPS( 1) | SCR_BRDV_DIV_8 },
+ { 16, SCR_BRPS( 1) | SCR_BRDV_DIV_16 },
+ { 32, SCR_BRPS( 1) | SCR_BRDV_DIV_32 },
+ { 64, SCR_BRPS(32) | SCR_BRDV_DIV_2 },
+ { 128, SCR_BRPS(32) | SCR_BRDV_DIV_4 },
+ { 256, SCR_BRPS(32) | SCR_BRDV_DIV_8 },
+ { 512, SCR_BRPS(32) | SCR_BRDV_DIV_16 },
+ { 1024, SCR_BRPS(32) | SCR_BRDV_DIV_32 },
};
static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p,
@@ -181,21 +229,21 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
*/
sh_msiof_write(p, FCTR, 0);
- tmp = 0;
- tmp |= !cs_high << 25;
- tmp |= lsb_first << 24;
- sh_msiof_write(p, TMDR1, 0xe0000005 | tmp);
- sh_msiof_write(p, RMDR1, 0x20000005 | tmp);
+ tmp = MDR1_SYNCMD_SPI | 1 << MDR1_FLD_SHIFT | MDR1_XXSTP;
+ tmp |= !cs_high << MDR1_SYNCAC_SHIFT;
+ tmp |= lsb_first << MDR1_BITLSB_SHIFT;
+ sh_msiof_write(p, TMDR1, tmp | MDR1_TRMD | TMDR1_PCON);
+ sh_msiof_write(p, RMDR1, tmp);
- tmp = 0xa0000000;
- tmp |= cpol << 30; /* TSCKIZ */
- tmp |= cpol << 28; /* RSCKIZ */
+ tmp = 0;
+ tmp |= CTR_TSCKIZ_SCK | cpol << CTR_TSCKIZ_POL_SHIFT;
+ tmp |= CTR_RSCKIZ_SCK | cpol << CTR_RSCKIZ_POL_SHIFT;
edge = cpol ^ !cpha;
- tmp |= edge << 27; /* TEDG */
- tmp |= edge << 26; /* REDG */
- tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */
+ tmp |= edge << CTR_TEDG_SHIFT;
+ tmp |= edge << CTR_REDG_SHIFT;
+ tmp |= tx_hi_z ? CTR_TXDIZ_HIZ : CTR_TXDIZ_LOW;
sh_msiof_write(p, CTR, tmp);
}
@@ -203,12 +251,12 @@ static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p,
const void *tx_buf, void *rx_buf,
u32 bits, u32 words)
{
- u32 dr2 = ((bits - 1) << 24) | ((words - 1) << 16);
+ u32 dr2 = MDR2_BITLEN1(bits) | MDR2_WDLEN1(words);
if (tx_buf)
sh_msiof_write(p, TMDR2, dr2);
else
- sh_msiof_write(p, TMDR2, dr2 | 1);
+ sh_msiof_write(p, TMDR2, dr2 | MDR2_GRPMASK1);
if (rx_buf)
sh_msiof_write(p, RMDR2, dr2);
@@ -694,8 +742,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
/* The standard version of MSIOF use 64 word FIFOs */
- p->tx_fifo_size = 64;
- p->rx_fifo_size = 64;
+ p->tx_fifo_size = DEFAULT_TX_FIFO_SIZE;
+ p->rx_fifo_size = DEFAULT_RX_FIFO_SIZE;
/* Platform data may override FIFO sizes */
if (p->info->tx_fifo_override)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists