| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1393178459-14637-4-git-send-email-vladimir.barinov@cogentembedded.com>
Date: Sun, 23 Feb 2014 22:00:58 +0400
From: <vladimir.barinov@...entembedded.com>
To: <linux-sh@...r.kernel.org>
Cc: <linus.walleij@...aro.org>, linux-gpio@...r.kernel.org,
<magnus.damm@...il.com>, <horms@...ge.net.au>, <gnurou@...il.com>,
<linux-kernel@...r.kernel.org>, <kuninori.morimoto.gx@...esas.com>,
<valentine.barshak@...entembedded.com>
Subject: [PATCH V4 3/4] ARM: shmobile: koelsch: Add USBHS and internal PCI USB support
From: Vladimir Barinov <vladimir.barinov@...entembedded.com>
This adds the following to R-Car M2 Koelsch board:
- USBHS PHY
- USBHS device
- internal PCI USB host devices
Depending on state of ID pin from MAX3355E chip the usb0 is configured
ether as host or gadget.
In case of gadget the USBHS device is registered.
In case of host the PCI USB is registered.
The USB phy is bound to either USB host or USBHS device respectively, hence
configured to ether channel 0 or 2.
The USBHS can act as USB Host, and this can be easily configured.
But the simplest test with storage stick connected to USBHS Host provides
IP resets and system hangs. Even the PWEN pin is not handled and it is nessasary to
provide VBUS using gpio. It is easy to see in RCAR H2/M2 documentation
that the USBHS IP changed. F.e. the PWEN/EXTLP pins are no more presented in
USBHS via DVSTCTR register. And others.
Since the USBHS is not stable in Host mode lets connect fully tested PCI USB IP to usb0.
Signed-off-by: Valentine Barshak <valentine.barshak@...entembedded.com>
Signed-off-by: Vladimir Barinov <vladimir.barinov@...entembedded.com>
Changes in V4:
* folded USBHS and internal PCI USB related patches together
* added handling of ID pin from MAX3355E chip
* removed ifdefs
Changes in V3:
* fixed a typo in the log message;
* fixed the USB1 device name in the pinmux table.
Changes in V2:
* capitalized ARM in the subject;
* rebased on top the latest devel tag;
* added pipe_type array to the usbhs platform info since it differs from the default.
* capitalized ARM in the subject;
* rebased on top the latest devel tag.
---
arch/arm/mach-shmobile/board-koelsch.c | 183 +++++++++++++++++++++++++++++++++
1 file changed, 183 insertions(+)
Index: build/arch/arm/mach-shmobile/board-koelsch.c
===================================================================
--- build.orig/arch/arm/mach-shmobile/board-koelsch.c 2014-02-23 21:47:44.510571967 +0400
+++ build/arch/arm/mach-shmobile/board-koelsch.c 2014-02-23 21:47:59.358571662 +0400
@@ -36,12 +36,15 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
@@ -367,6 +370,177 @@
DEFINE_RES_IRQ(gic_spi(168)),
};
+/* USBHS */
+static const struct resource usbhs_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6590000, 0x100),
+ DEFINE_RES_IRQ(gic_spi(107)),
+};
+
+struct usbhs_private {
+ struct renesas_usbhs_platform_info info;
+ struct usb_phy *phy;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_power_ctrl(struct platform_device *pdev,
+ void __iomem *base, int enable)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ if (!priv->phy)
+ return -ENODEV;
+
+ if (enable) {
+ int retval = usb_phy_init(priv->phy);
+
+ if (!retval)
+ retval = usb_phy_set_suspend(priv->phy, 0);
+ return retval;
+ }
+
+ usb_phy_set_suspend(priv->phy, 1);
+ usb_phy_shutdown(priv->phy);
+ return 0;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+ struct usb_phy *phy;
+
+ phy = usb_get_phy_dev(&pdev->dev, 0);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ priv->phy = phy;
+ return 0;
+}
+
+static int usbhs_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ if (!priv->phy)
+ return 0;
+
+ usb_put_phy(priv->phy);
+ priv->phy = NULL;
+ return 0;
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static u32 koelsch_usbhs_pipe_type[] = {
+ USB_ENDPOINT_XFER_CONTROL,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_priv __initdata = {
+ .info = {
+ .platform_callback = {
+ .power_ctrl = usbhs_power_ctrl,
+ .hardware_init = usbhs_hardware_init,
+ .hardware_exit = usbhs_hardware_exit,
+ .get_id = usbhs_get_id,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .pipe_type = koelsch_usbhs_pipe_type,
+ .pipe_size = ARRAY_SIZE(koelsch_usbhs_pipe_type),
+ },
+ }
+};
+
+static void __init koelsch_add_usb0_gadget(void)
+{
+ usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
+ platform_device_register_resndata(&platform_bus,
+ "renesas_usbhs", -1,
+ usbhs_resources,
+ ARRAY_SIZE(usbhs_resources),
+ &usbhs_priv.info,
+ sizeof(usbhs_priv.info));
+}
+
+/* Internal PCI0 */
+static const struct resource pci0_resources[] __initconst = {
+ DEFINE_RES_MEM(0xee090000, 0x10000), /* CFG */
+ DEFINE_RES_MEM(0xee080000, 0x10000), /* MEM */
+ DEFINE_RES_IRQ(gic_spi(108)),
+};
+
+static void __init koelsch_add_usb0_host(void)
+{
+ usb_bind_phy("0000:00:01.0", 0, "usb_phy_rcar_gen2");
+ usb_bind_phy("0000:00:02.0", 0, "usb_phy_rcar_gen2");
+ platform_device_register_simple("pci-rcar-gen2",
+ 0, pci0_resources,
+ ARRAY_SIZE(pci0_resources));
+}
+
+/* Internal PCI1 */
+static const struct resource pci1_resources[] __initconst = {
+ DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */
+ DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */
+ DEFINE_RES_IRQ(gic_spi(113)),
+};
+
+static void __init koelsch_add_usb1_host(void)
+{
+ platform_device_register_simple("pci-rcar-gen2",
+ 1, pci1_resources,
+ ARRAY_SIZE(pci1_resources));
+}
+
+/* USBHS PHY */
+static struct rcar_gen2_phy_platform_data usbhs_phy_pdata = {
+ .chan2_pci = 1, /* Channel 2 is PCI USB host */
+};
+
+static const struct resource usbhs_phy_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6590100, 0x100),
+};
+
+/* Add all available USB devices */
+static void __init koelsch_add_usb_devices(void)
+{
+ /* MAX3355E ID pin */
+ gpio_request_one(RCAR_GP_PIN(5, 31), GPIOF_IN, NULL);
+ if (!gpio_get_value(RCAR_GP_PIN(5, 31))) {
+ usbhs_phy_pdata.chan0_pci = 1; /* Channel 0 is PCI USB host */
+ koelsch_add_usb0_host();
+ } else {
+ usbhs_phy_pdata.chan0_pci = 0; /* Channel 0 is USBHS */
+ koelsch_add_usb0_gadget();
+ }
+
+ platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
+ -1, usbhs_phy_resources,
+ ARRAY_SIZE(usbhs_phy_resources),
+ &usbhs_phy_pdata,
+ sizeof(usbhs_phy_pdata));
+ koelsch_add_usb1_host();
+}
+
static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* DU */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -429,6 +603,14 @@
"sdhi2_ctrl", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
"sdhi2_cd", "sdhi2"),
+ /* USB0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7791",
+ "usb0", "usb0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.0", "pfc-r8a7791",
+ "usb0", "usb0"),
+ /* USB1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7791",
+ "usb1", "usb1"),
};
static void __init koelsch_add_standard_devices(void)
@@ -485,6 +667,7 @@
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
+ koelsch_add_usb_devices();
}
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists