lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 22 Feb 2014 22:14:02 -0800
From:	Alejandro Cabrera <acabrera@...o.cujae.edu.cu>
To:	Guenter Roeck <linux@...ck-us.net>
CC:	Wim Van Sebroeck <wim@...ana.be>,
	Michal Simek <michal.simek@...inx.com>,
	linux-kernel@...r.kernel.org, monstr@...str.eu,
	linux-watchdog@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 07/11] watchdog: xilinx: Use of_property_read_u32

On 22/2/2014 5:36 PM, Guenter Roeck wrote:
> On 02/22/2014 07:52 PM, Alejandro Cabrera wrote:
>> On 22/2/2014 3:18 PM, Guenter Roeck wrote:
>>> On 02/22/2014 05:08 PM, Alejandro Cabrera wrote:
>>>> On 22/2/2014 10:46 AM, Wim Van Sebroeck wrote:
>>>>> Hi All,
>>>>>
>>>>>> Hi Michal,
>>>>>>
>>>>>> On Wed, Feb 12, 2014 at 02:41:21PM +0100, Michal Simek wrote:
>>>>>>> Use of_property_read_u32 functions to clean probe function.
>>>>>>>
>>>>>>> Signed-off-by: Michal Simek<michal.simek@...inx.com>
>>>>>>> Reviewed-by: Guenter Roeck<linux@...ck-us.net>
>>>>>>> ---
>>>>>>>
>>>>>>> Changes in v3:
>>>>>>> - Remove one if checking and use variable directly
>>>>>>>
>>>>>> Looks good.
>>>>>>
>>>>>> Another comment/remark.
>>>>>>
>>>>>>> -    pfreq = (u32 *)of_get_property(pdev->dev.of_node,
>>>>>>> -                    "clock-frequency", NULL);
>>>>>>> -
>>>>>>> -    if (pfreq == NULL) {
>>>>>>> +    rc = of_property_read_u32(pdev->dev.of_node, 
>>>>>>> "clock-frequency",&pfreq);
>>>>>>> +    if (rc) {
>>>>>>>           dev_warn(&pdev->dev,
>>>>>>>                "The watchdog clock frequency cannot be 
>>>>>>> obtained\n");
>>>>>>>           no_timeout = true;
>>>>>>>       }
>>>>>>>
>>>>>>> -    tmptr = (u32 *)of_get_property(pdev->dev.of_node,
>>>>>>> -                    "xlnx,wdt-interval", NULL);
>>>>>>> -    if (tmptr == NULL) {
>>>>>>> +    rc = of_property_read_u32(pdev->dev.of_node, 
>>>>>>> "xlnx,wdt-interval",
>>>>>>> + &xdev->wdt_interval);
>>>>>>> +    if (rc) {
>>>>>>>           dev_warn(&pdev->dev,
>>>>>>>                "Parameter \"xlnx,wdt-interval\" not found\n");
>>>>>>>           no_timeout = true;
>>>>>>> -    } else {
>>>>>>> -        xdev->wdt_interval = *tmptr;
>>>>>>>       }
>>>>>>>
>>>>>>> -    tmptr = (u32 *)of_get_property(pdev->dev.of_node,
>>>>>>> -                    "xlnx,wdt-enable-once", NULL);
>>>>>>> -    if (tmptr == NULL) {
>>>>>>> +    rc = of_property_read_u32(pdev->dev.of_node, 
>>>>>>> "xlnx,wdt-enable-once",
>>>>>>> + &enable_once);
>>>>>>> +    if (rc)
>>>>>>>           dev_warn(&pdev->dev,
>>>>>>>                "Parameter \"xlnx,wdt-enable-once\" not found\n");
>>>>>>> -        watchdog_set_nowayout(xilinx_wdt_wdd, true);
>>>>>>> -    }
>>>>>> All the above properties are optional. Is a warning really
>>>>>> warranted in this case ? I usually associate a warning with
>>>>>> something that is wrong, which is not the case here.
>>>>>>
>>>>>> I would encourage you to drop those warnings, but that should be
>>>>>> a separate patch.
>>>>> I agree with Guenter: these are not really warnings. Seperate 
>>>>> patch is thus welcome.
>>>> Hi
>>>>
>>>> I support Michal intention, I think it is a warning because device 
>>>> tree blob must have the "xlnx,wdt-enable-once" property specified 
>>>> in order to allow the system to be sure of the real value of this 
>>>> property. In addition to, this warning can be helpful to detect a 
>>>> wrong device tree specification.
>>>>
>>>
>>> The dt documentation states that the properties are optional.
>>>
>>> Optional properties:
>>> - clock-frequency       : Frequency of clock in Hz
>>> - xlnx,wdt-enable-once  : 0 - Watchdog can be restarted
>>>                           1 - Watchdog can be enabled just once
>>> - xlnx,wdt-interval     : Watchdog timeout interval in 2^<val> clock 
>>> cycles,
>>> <val> is integer from 8 to 31.
>>>
>>> This clearly conflicts with your statement. An optional property
>>> is just that, optional. If it warrants a warning, it must
>>> not be optional. If you claim that not providing the properties
>>> would be "wrong", why are they defined as optional ?
>> Hi Guenter
>>
>> I didn't know that these properties was classified as optional...
>> I think that they should not be, because all xilinx watchog devices 
>> (at least for microblaze processor)
>> have these properties defined in theirs MPD files and theirs values 
>> can be obtained during the
>> hardware specification to device tree conversion.
>>> What is your definition of "wrong" and "must have" ?
>> what I mean for "must have" is: if these properties can be obtained
>> for all xilinx watchdog devices they must be present in the device 
>> tree because they allows
>> the system (linux/user) to know exactly how a watchdog device is 
>> configured.
>> Because these properties always can be obtained from hardware design 
>> there is no
>> reason to leave them out from the device tree. This is why I consider 
>> that a device tree without
>> these properties should be considered as "wrong" device tree.
>>> How do you expect anyone to know that omitting those
>>> "optional" properties is by some definition "wrong" ?
>> I'm agree with you.
>> Maybe these properties shouldn't be optional.
>> For example suppose that "xlnx,wdt-enable-once" is missing in the 
>> device tree,
>> when a watchdog daemon ask for this property what is the obtained 
>> value ?
>> Independently of this value, why do not warn the user about this 
>> missing property
>> when it can always be in the device tree ?
>>
>
> Really, this line of argument doesn't make any sense to me.
> "xlnx,wdt-enable-once", for example, is a boolean and means
> that the watchdog, when enabled, can not be stopped. It defaults
> to false, and thus is inherently optional. Making it mandatory
> doesn't really add any value.
>

If the device has been configured with wdt-enable-once=true
and the device tree doesn't have this property then a watchdog daemon
would see it as "false" because it is the default making the system to 
misbehave...
A warning during driver loading could help user to identify the problem.

Making these properties as mandatory and warn where any of them
are not in device tree may be helpful.

Alejandro



50 Aniversario de la Cujae. Inaugurada por Fidel el 2 de diciembre de 1964  http://cujae.edu.cu


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists