[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1393434074-15600-7-git-send-email-alexandre.belloni@free-electrons.com>
Date: Wed, 26 Feb 2014 18:01:14 +0100
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Gregory Clement <gregory.clement@...e-electrons.com>,
b.brezillon@...rkiz.com,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH 7/7] ARM: at91/dt: sama5d3: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver.
Also, stop using unit-addresses for the triggers as suggested by Mark
Rutland in
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/boot/dts/sama5d3.dtsi | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 26d7ed510c96..46f610a09b38 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -261,35 +261,30 @@
clocks = <&adc_clk>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
- atmel,adc-channel-base = <0x50>;
atmel,adc-channels-used = <0xfff>;
- atmel,adc-drdy-mask = <0x1000000>;
- atmel,adc-num-channels = <12>;
atmel,adc-startup-time = <40>;
- atmel,adc-status-register = <0x30>;
- atmel,adc-trigger-register = <0xc0>;
atmel,adc-use-external;
atmel,adc-vref = <3000>;
atmel,adc-res = <10 12>;
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
- trigger@0 {
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists