| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b6961624-add3-480a-8757-c2ff2893622f@email.android.com>
Date: Wed, 26 Feb 2014 17:20:03 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Johannes Thumshirn <johannes.thumshirn@....de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/3] iio: adc: Add MEN 16z188 ADC driver
On February 26, 2014 4:29:07 PM GMT+00:00, Johannes Thumshirn <johannes.thumshirn@....de> wrote:
>Add support for MEN 16z188 ADC IP Core on MCB FPGAs.
>
>Signed-off-by: Johannes Thumshirn <johannes.thumshirn@....de>
Acked-by: Jonathan Cameron <jic23@...nel.org>
The other two patches look sane to me as well.
Anyhow, assuming everyone is happy with those (not yet clear)... Greg do you want to
take this directly or would you prefer if I pick the series up and send on to you via the IIO
tree? I'm happy either way.
Jonathan
>---
>
>Changes to v2:
>* changed devm_iio_register_driver() to
>iio_register_driver()/iio_unregister_driver()
>
> drivers/iio/adc/Kconfig | 10 +++
> drivers/iio/adc/Makefile | 1 +
>drivers/iio/adc/men_z188_adc.c | 171
>+++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 182 insertions(+)
> create mode 100644 drivers/iio/adc/men_z188_adc.c
>
>diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>index 2209f28..5c63f091 100644
>--- a/drivers/iio/adc/Kconfig
>+++ b/drivers/iio/adc/Kconfig
>@@ -155,6 +155,16 @@ config MCP3422
> This driver can also be built as a module. If so, the module will be
> called mcp3422.
>
>+config MEN_Z188_ADC
>+ tristate "MEN 16z188 ADC IP Core support"
>+ depends on MCB
>+ help
>+ Say yes here to enable support for the MEN 16z188 ADC IP-Core on a
>MCB
>+ carrier.
>+
>+ This driver can also be built as a module. If so, the module will
>be
>+ called men_z188_adc.
>+
> config NAU7802
> tristate "Nuvoton NAU7802 ADC driver"
> depends on I2C
>diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>index ba9a10a..85a4a04 100644
>--- a/drivers/iio/adc/Makefile
>+++ b/drivers/iio/adc/Makefile
>@@ -17,6 +17,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> obj-$(CONFIG_MAX1363) += max1363.o
> obj-$(CONFIG_MCP320X) += mcp320x.o
> obj-$(CONFIG_MCP3422) += mcp3422.o
>+obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
> obj-$(CONFIG_NAU7802) += nau7802.o
> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
>diff --git a/drivers/iio/adc/men_z188_adc.c
>b/drivers/iio/adc/men_z188_adc.c
>new file mode 100644
>index 0000000..7036503
>--- /dev/null
>+++ b/drivers/iio/adc/men_z188_adc.c
>@@ -0,0 +1,171 @@
>+/*
>+ * MEN 16z188 Analog to Digial Converter
>+ *
>+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
>+ * Author: Johannes Thumshirn <johannes.thumshirn@....de>
>+ *
>+ * This program is free software; you can redistribute it and/or
>modify it
>+ * under the terms of the GNU General Public License as published by
>the Free
>+ * Software Foundation; version 2 of the License.
>+ */
>+
>+#include <linux/kernel.h>
>+#include <linux/module.h>
>+#include <linux/mcb.h>
>+#include <linux/iio/iio.h>
>+
>+#define Z188_ADC_MAX_CHAN 8
>+#define Z188_ADC_GAIN 0x0700000
>+#define Z188_MODE_VOLTAGE BIT(27)
>+#define Z188_CFG_AUTO 0x1
>+#define Z188_CTRL_REG 0x40
>+
>+#define ADC_DATA(x) (((x) >> 2) & 0x7ffffc)
>+#define ADC_OVR(x) ((x) & 0x1)
>+
>+struct z188_adc {
>+ struct resource *mem;
>+ void __iomem *base;
>+};
>+
>+#define Z188_ADC_CHANNEL(idx) { \
>+ .type = IIO_VOLTAGE, \
>+ .indexed = 1, \
>+ .channel = (idx), \
>+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>+}
>+
>+static const struct iio_chan_spec z188_adc_iio_channels[] = {
>+ Z188_ADC_CHANNEL(0),
>+ Z188_ADC_CHANNEL(1),
>+ Z188_ADC_CHANNEL(2),
>+ Z188_ADC_CHANNEL(3),
>+ Z188_ADC_CHANNEL(4),
>+ Z188_ADC_CHANNEL(5),
>+ Z188_ADC_CHANNEL(6),
>+ Z188_ADC_CHANNEL(7),
>+};
>+
>+static int z188_iio_read_raw(struct iio_dev *iio_dev,
>+ struct iio_chan_spec const *chan,
>+ int *val,
>+ int *val2,
>+ long info)
>+{
>+ struct z188_adc *adc = iio_priv(iio_dev);
>+ int ret;
>+ u16 tmp;
>+
>+ switch (info) {
>+ case IIO_CHAN_INFO_RAW:
>+ tmp = readw(adc->base + chan->channel * 4);
>+
>+ if (ADC_OVR(tmp)) {
>+ dev_info(&iio_dev->dev,
>+ "Oversampling error on ADC channel %d\n",
>+ chan->channel);
>+ return -EIO;
>+ }
>+ *val = ADC_DATA(tmp);
>+ ret = IIO_VAL_INT;
>+ break;
>+ default:
>+ ret = -EINVAL;
>+ break;
>+ }
>+
>+ return ret;
>+}
>+
>+static struct iio_info z188_adc_info = {
>+ .read_raw = &z188_iio_read_raw,
>+ .driver_module = THIS_MODULE,
>+};
>+
>+static void men_z188_config_channels(void __iomem *addr)
>+{
>+ int i;
>+ u32 cfg;
>+ u32 ctl;
>+
>+ ctl = readl(addr + Z188_CTRL_REG);
>+ ctl |= Z188_CFG_AUTO;
>+ writel(ctl, addr + Z188_CTRL_REG);
>+
>+ for (i = 0; i < Z188_ADC_MAX_CHAN; i++) {
>+ cfg = readl(addr + i);
>+ cfg &= ~Z188_ADC_GAIN;
>+ cfg |= Z188_MODE_VOLTAGE;
>+ writel(cfg, addr + i);
>+ }
>+}
>+
>+static int men_z188_probe(struct mcb_device *dev,
>+ const struct mcb_device_id *id)
>+{
>+ struct z188_adc *adc;
>+ struct iio_dev *indio_dev;
>+ struct resource *mem;
>+
>+ indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct
>z188_adc));
>+ if (!indio_dev)
>+ return -ENOMEM;
>+
>+ adc = iio_priv(indio_dev);
>+ indio_dev->name = "z188-adc";
>+ indio_dev->dev.parent = &dev->dev;
>+ indio_dev->info = &z188_adc_info;
>+ indio_dev->modes = INDIO_DIRECT_MODE;
>+ indio_dev->channels = z188_adc_iio_channels;
>+ indio_dev->num_channels = ARRAY_SIZE(z188_adc_iio_channels);
>+
>+ mem = mcb_request_mem(dev, "z188-adc");
>+ if (!mem)
>+ return -ENOMEM;
>+
>+ adc->base = ioremap(mem->start, resource_size(mem));
>+ if (adc->base == NULL)
>+ goto err;
>+
>+ men_z188_config_channels(adc->base);
>+
>+ adc->mem = mem;
>+ mcb_set_drvdata(dev, indio_dev);
>+
>+ return iio_device_register(indio_dev);
>+
>+err:
>+ mcb_release_mem(mem);
>+ return -ENXIO;
>+}
>+
>+static void men_z188_remove(struct mcb_device *dev)
>+{
>+ struct iio_dev *indio_dev = mcb_get_drvdata(dev);
>+ struct z188_adc *adc = iio_priv(indio_dev);
>+
>+ iio_device_unregister(indio_dev);
>+ iounmap(adc->base);
>+ mcb_release_mem(adc->mem);
>+}
>+
>+static const struct mcb_device_id men_z188_ids[] = {
>+ { .device = 0xbc },
>+};
>+MODULE_DEVICE_TABLE(mcb, men_z188_ids);
>+
>+static struct mcb_driver men_z188_driver = {
>+ .driver = {
>+ .name = "z188-adc",
>+ .owner = THIS_MODULE,
>+ },
>+ .probe = men_z188_probe,
>+ .remove = men_z188_remove,
>+ .id_table = men_z188_ids,
>+};
>+module_mcb_driver(men_z188_driver);
>+
>+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@....de>");
>+MODULE_LICENSE("GPL");
>+MODULE_DESCRIPTION("IIO ADC driver for MEN 16z188 ADC Core");
>+MODULE_ALIAS("mcb:16z188");
>--
>1.8.5.4
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists