| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1393377313-28695-3-git-send-email-mcgrof@do-not-panic.com>
Date: Tue, 25 Feb 2014 17:15:13 -0800
From: "Luis R. Rodriguez" <mcgrof@...not-panic.com>
To: ben@...adent.org.uk, netdev@...r.kernel.org
Cc: f.fainelli@...il.com, davem@...emloft.net,
linux-kernel@...r.kernel.org, "Luis R. Rodriguez" <mcgrof@...e.com>
Subject: [PATCH v2 2/2] net: move net_device priv_flags out from UAPI
From: "Luis R. Rodriguez" <mcgrof@...e.com>
These are private to userspace, and they're unstable
anyway and can be shuffled at will (see 080e4130b1fb)
so any userspace application relying on them is on crack.
Test compiled with allyesconfig.
mcgrof@...bp1 /pub/mem/mcgrof/net-next (git::master)$ make allyesconfig
mcgrof@...bp1 /pub/mem/mcgrof/net-next (git::master)$ time make -j 20
...
BUILD arch/x86/boot/bzImage
Setup is 16992 bytes (padded to 17408 bytes).
System is 56153 kB
CRC 721d2751
Kernel: arch/x86/boot/bzImage is ready (#1)
real 19m35.744s
user 280m37.984s
sys 27m54.104s
Cc: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: Ben Hutchings <ben@...adent.org.uk>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: David Miller <davem@...emloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@...e.com>
---
include/linux/netdevice.h | 83 +++++++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/if.h | 83 -----------------------------------------------
2 files changed, 83 insertions(+), 83 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5e47565..8c4a364 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1147,6 +1147,89 @@ struct net_device_ops {
void *priv);
};
+/**
+ * enum net_device_priv_flags - &struct net_device priv_flags
+ *
+ * These are the &struct net_device, they are only set internally
+ * by drivers and used in the kernel. These flags are invisible to
+ * userspace, this means that the order of these flags can change
+ * during any kernel release.
+ *
+ * You should have a pretty good reason to be extending these flags.
+ *
+ * @IFF_802_1Q_VLAN: 802.1Q VLAN device
+ * @IFF_EBRIDGE: Ethernet bridging device
+ * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active
+ * @IFF_MASTER_8023AD: bonding master, 802.3ad
+ * @IFF_MASTER_ALB: bonding master, balance-alb
+ * @IFF_BONDING: bonding master or slave
+ * @IFF_SLAVE_NEEDARP: need ARPs for validation
+ * @IFF_ISATAP: ISATAP interface (RFC4214)
+ * @IFF_MASTER_ARPMON: bonding master, ARP mon in use
+ * @IFF_WAN_HDLC: WAN HDLC device
+ * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to
+ * release skb->dst
+ * @IFF_DONT_BRIDGE: disallow bridging this ether dev
+ * @IFF_DISABLE_NETPOLL: disable netpoll at run-time
+ * @IFF_MACVLAN_PORT: device used as macvlan port
+ * @IFF_BRIDGE_PORT: device used as bridge port
+ * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port
+ * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit
+ * @IFF_UNICAST_FLT: Supports unicast filtering
+ * @IFF_TEAM_PORT: device used as team port
+ * @IFF_SUPP_NOFCS: device supports sending custom FCS
+ * @IFF_LIVE_ADDR_CHANGE: device supports hardware address
+ * change when it's running
+ * @IFF_MACVLAN: Macvlan device
+ */
+enum netdev_priv_flags {
+ IFF_802_1Q_VLAN = 1<<0,
+ IFF_EBRIDGE = 1<<1,
+ IFF_SLAVE_INACTIVE = 1<<2,
+ IFF_MASTER_8023AD = 1<<3,
+ IFF_MASTER_ALB = 1<<4,
+ IFF_BONDING = 1<<5,
+ IFF_SLAVE_NEEDARP = 1<<6,
+ IFF_ISATAP = 1<<7,
+ IFF_MASTER_ARPMON = 1<<8,
+ IFF_WAN_HDLC = 1<<9,
+ IFF_XMIT_DST_RELEASE = 1<<10,
+ IFF_DONT_BRIDGE = 1<<11,
+ IFF_DISABLE_NETPOLL = 1<<12,
+ IFF_MACVLAN_PORT = 1<<13,
+ IFF_BRIDGE_PORT = 1<<14,
+ IFF_OVS_DATAPATH = 1<<15,
+ IFF_TX_SKB_SHARING = 1<<16,
+ IFF_UNICAST_FLT = 1<<17,
+ IFF_TEAM_PORT = 1<<18,
+ IFF_SUPP_NOFCS = 1<<19,
+ IFF_LIVE_ADDR_CHANGE = 1<<20,
+ IFF_MACVLAN = 1<<21,
+};
+
+#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
+#define IFF_EBRIDGE IFF_EBRIDGE
+#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE
+#define IFF_MASTER_8023AD IFF_MASTER_8023AD
+#define IFF_MASTER_ALB IFF_MASTER_ALB
+#define IFF_BONDING IFF_BONDING
+#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP
+#define IFF_ISATAP IFF_ISATAP
+#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON
+#define IFF_WAN_HDLC IFF_WAN_HDLC
+#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE
+#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE
+#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL
+#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT
+#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT
+#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH
+#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING
+#define IFF_UNICAST_FLT IFF_UNICAST_FLT
+#define IFF_TEAM_PORT IFF_TEAM_PORT
+#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS
+#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
+#define IFF_MACVLAN IFF_MACVLAN
+
/*
* The DEVICE structure.
* Actually, this whole structure is a big mistake. It mixes I/O
diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h
index 42ec879..9cf2394 100644
--- a/include/uapi/linux/if.h
+++ b/include/uapi/linux/if.h
@@ -112,89 +112,6 @@ enum net_device_flags {
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-/**
- * enum net_device_priv_flags - &struct net_device priv_flags
- *
- * These are the &struct net_device, they are only set internally
- * by drivers and used in the kernel. These flags are invisible to
- * userspace, this means that the order of these flags can change
- * during any kernel release.
- *
- * You should have a pretty good reason to be extending these flags.
- *
- * @IFF_802_1Q_VLAN: 802.1Q VLAN device
- * @IFF_EBRIDGE: Ethernet bridging device
- * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active
- * @IFF_MASTER_8023AD: bonding master, 802.3ad
- * @IFF_MASTER_ALB: bonding master, balance-alb
- * @IFF_BONDING: bonding master or slave
- * @IFF_SLAVE_NEEDARP: need ARPs for validation
- * @IFF_ISATAP: ISATAP interface (RFC4214)
- * @IFF_MASTER_ARPMON: bonding master, ARP mon in use
- * @IFF_WAN_HDLC: WAN HDLC device
- * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to
- * release skb->dst
- * @IFF_DONT_BRIDGE: disallow bridging this ether dev
- * @IFF_DISABLE_NETPOLL: disable netpoll at run-time
- * @IFF_MACVLAN_PORT: device used as macvlan port
- * @IFF_BRIDGE_PORT: device used as bridge port
- * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port
- * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit
- * @IFF_UNICAST_FLT: Supports unicast filtering
- * @IFF_TEAM_PORT: device used as team port
- * @IFF_SUPP_NOFCS: device supports sending custom FCS
- * @IFF_LIVE_ADDR_CHANGE: device supports hardware address
- * change when it's running
- * @IFF_MACVLAN: Macvlan device
- */
-enum netdev_priv_flags {
- IFF_802_1Q_VLAN = 1<<0,
- IFF_EBRIDGE = 1<<1,
- IFF_SLAVE_INACTIVE = 1<<2,
- IFF_MASTER_8023AD = 1<<3,
- IFF_MASTER_ALB = 1<<4,
- IFF_BONDING = 1<<5,
- IFF_SLAVE_NEEDARP = 1<<6,
- IFF_ISATAP = 1<<7,
- IFF_MASTER_ARPMON = 1<<8,
- IFF_WAN_HDLC = 1<<9,
- IFF_XMIT_DST_RELEASE = 1<<10,
- IFF_DONT_BRIDGE = 1<<11,
- IFF_DISABLE_NETPOLL = 1<<12,
- IFF_MACVLAN_PORT = 1<<13,
- IFF_BRIDGE_PORT = 1<<14,
- IFF_OVS_DATAPATH = 1<<15,
- IFF_TX_SKB_SHARING = 1<<16,
- IFF_UNICAST_FLT = 1<<17,
- IFF_TEAM_PORT = 1<<18,
- IFF_SUPP_NOFCS = 1<<19,
- IFF_LIVE_ADDR_CHANGE = 1<<20,
- IFF_MACVLAN = 1<<21,
-};
-
-#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
-#define IFF_EBRIDGE IFF_EBRIDGE
-#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE
-#define IFF_MASTER_8023AD IFF_MASTER_8023AD
-#define IFF_MASTER_ALB IFF_MASTER_ALB
-#define IFF_BONDING IFF_BONDING
-#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP
-#define IFF_ISATAP IFF_ISATAP
-#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON
-#define IFF_WAN_HDLC IFF_WAN_HDLC
-#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE
-#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE
-#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL
-#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT
-#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT
-#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH
-#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING
-#define IFF_UNICAST_FLT IFF_UNICAST_FLT
-#define IFF_TEAM_PORT IFF_TEAM_PORT
-#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS
-#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
-#define IFF_MACVLAN IFF_MACVLAN
-
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists