| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1393443530-9216-4-git-send-email-mathias.nyman@linux.intel.com>
Date: Wed, 26 Feb 2014 21:38:49 +0200
From: Mathias Nyman <mathias.nyman@...ux.intel.com>
To: <linux-usb@...r.kernel.org>
Cc: <sarah.a.sharp@...ux.intel.com>, <dan.j.williams@...el.com>,
<linux-kernel@...r.kernel.org>,
Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [RFCv3 3/4] xhci: Use completion and status in global command queue
Remove the per-device command list and handle_cmd_in_cmd_wait_list()
and use the completion and status variables found in the
command structure in the global command list.
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
---
drivers/usb/host/xhci-hub.c | 11 -------
drivers/usb/host/xhci-mem.c | 1 -
drivers/usb/host/xhci-ring.c | 78 +++++++-------------------------------------
drivers/usb/host/xhci.c | 16 ++-------
drivers/usb/host/xhci.h | 3 --
5 files changed, 14 insertions(+), 95 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fb0f936..0a57d95 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -299,7 +299,6 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
suspend);
}
}
- list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -311,18 +310,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for stop endpoint command\n",
timeleft == 0 ? "Timeout" : "Signal");
- spin_lock_irqsave(&xhci->lock, flags);
- /* The timeout might have raced with the event ring handler, so
- * only delete from the list if the item isn't poisoned.
- */
- if (cmd->cmd_list.next != LIST_POISON1)
- list_del(&cmd->cmd_list);
- spin_unlock_irqrestore(&xhci->lock, flags);
ret = -ETIME;
- goto command_cleanup;
}
-
-command_cleanup:
xhci_free_command(xhci, cmd);
return ret;
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9df2aa0..81c2469 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -919,7 +919,6 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
dev->num_rings_cached = 0;
init_completion(&dev->cmd_completion);
- INIT_LIST_HEAD(&dev->cmd_list);
dev->udev = udev;
/* Point to output device context in dcbaa. */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 39d3ff7..12bf467 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -69,10 +69,6 @@
#include "xhci.h"
#include "xhci-trace.h"
-static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
- struct xhci_virt_device *virt_dev,
- struct xhci_event_cmd *event);
-
/*
* Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
* address of the TRB.
@@ -755,7 +751,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
union xhci_trb *trb, struct xhci_event_cmd *event)
{
unsigned int ep_index;
- struct xhci_virt_device *virt_dev;
struct xhci_ring *ep_ring;
struct xhci_virt_ep *ep;
struct list_head *entry;
@@ -765,11 +760,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
struct xhci_dequeue_state deq_state;
if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
- virt_dev = xhci->devs[slot_id];
- if (virt_dev)
- handle_cmd_in_cmd_wait_list(xhci, virt_dev,
- event);
- else
+ if (!xhci->devs[slot_id])
xhci_warn(xhci, "Stop endpoint command "
"completion for disabled slot %u\n",
slot_id);
@@ -1197,29 +1188,6 @@ static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
}
-/* Check to see if a command in the device's command queue matches this one.
- * Signal the completion or free the command, and return 1. Return 0 if the
- * completed command isn't at the head of the command list.
- */
-static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
- struct xhci_virt_device *virt_dev,
- struct xhci_event_cmd *event)
-{
- struct xhci_command *command;
-
- if (list_empty(&virt_dev->cmd_list))
- return 0;
-
- command = list_entry(virt_dev->cmd_list.next,
- struct xhci_command, cmd_list);
- if (xhci->cmd_ring->dequeue != command->command_trb)
- return 0;
-
- xhci_complete_cmd_in_cmd_wait_list(xhci, command,
- GET_COMP_CODE(le32_to_cpu(event->status)));
- return 1;
-}
-
/*
* Finding the command trb need to be cancelled and modifying it to
* NO OP command. And if the command is in device's command wait
@@ -1371,7 +1339,6 @@ static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
xhci->slot_id = slot_id;
else
xhci->slot_id = 0;
- complete(&xhci->addr_dev);
}
static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
@@ -1396,9 +1363,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_state;
u32 add_flags, drop_flags;
- virt_dev = xhci->devs[slot_id];
- if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
- return;
/*
* Configure endpoint commands can come from the USB core
* configuration or alt setting changes, or because the HW
@@ -1407,6 +1371,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
* If the command was for a halted endpoint, the xHCI driver
* is not waiting on the configure endpoint command.
*/
+ virt_dev = xhci->devs[slot_id];
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "Could not get input context, bad type.\n");
@@ -1442,35 +1407,11 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
return;
}
-static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id,
- struct xhci_event_cmd *event, u32 cmd_comp_code)
-{
- struct xhci_virt_device *virt_dev;
-
- virt_dev = xhci->devs[slot_id];
- if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
- return;
- virt_dev->cmd_status = cmd_comp_code;
- complete(&virt_dev->cmd_completion);
-}
-
-static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id,
- u32 cmd_comp_code)
-{
- xhci->devs[slot_id]->cmd_status = cmd_comp_code;
- complete(&xhci->addr_dev);
-}
-
static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id,
struct xhci_event_cmd *event)
{
- struct xhci_virt_device *virt_dev;
-
xhci_dbg(xhci, "Completed reset device command.\n");
- virt_dev = xhci->devs[slot_id];
- if (virt_dev)
- handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
- else
+ if (!xhci->devs[slot_id])
xhci_warn(xhci, "Reset device command completion "
"for disabled slot %u\n", slot_id);
}
@@ -1552,13 +1493,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci_handle_cmd_disable_slot(xhci, slot_id);
break;
case TRB_CONFIG_EP:
- xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code);
+ if (!cmd->completion)
+ xhci_handle_cmd_config_ep(xhci, slot_id, event,
+ cmd_comp_code);
break;
case TRB_EVAL_CONTEXT:
- xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code);
break;
case TRB_ADDR_DEV:
- xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code);
break;
case TRB_STOP_RING:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
@@ -1593,8 +1534,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
list_del(&cmd->cmd_list);
- if (!cmd->completion)
+ if (cmd->completion) {
+ /* the caller waiting for completion should free the command */
+ cmd->status = cmd_comp_code;
+ complete(cmd->completion);
+ } else {
kfree(cmd);
+ }
inc_deq(xhci, xhci->cmd_ring);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 97de328..4dc88ae 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2622,8 +2622,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
return -ENOMEM;
}
- list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
-
if (!ctx_change)
ret = xhci_queue_configure_endpoint(xhci, command,
command->in_ctx->dma,
@@ -2633,7 +2631,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
command->in_ctx->dma,
udev->slot_id, must_succeed);
if (ret < 0) {
- list_del(&command->cmd_list);
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3473,11 +3470,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
- list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id);
if (ret) {
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
- list_del(&reset_device_cmd->cmd_list);
spin_unlock_irqrestore(&xhci->lock, flags);
goto command_cleanup;
}
@@ -3491,13 +3486,6 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for reset device command\n",
timeleft == 0 ? "Timeout" : "Signal");
- spin_lock_irqsave(&xhci->lock, flags);
- /* The timeout might have raced with the event ring handler, so
- * only delete from the list if the item isn't poisoned.
- */
- if (reset_device_cmd->cmd_list.next != LIST_POISON1)
- list_del(&reset_device_cmd->cmd_list);
- spin_unlock_irqrestore(&xhci->lock, flags);
ret = -ETIME;
goto command_cleanup;
}
@@ -3864,7 +3852,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
return -ETIME;
}
- switch (virt_dev->cmd_status) {
+ switch (command->status) {
case COMP_CTX_STATE:
case COMP_EBADSLT:
xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n",
@@ -3887,7 +3875,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
default:
xhci_err(xhci,
"ERROR: unexpected setup %s command completion code 0x%x.\n",
- act, virt_dev->cmd_status);
+ act, command->status);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7052b8c..217e5b0 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -938,9 +938,6 @@ struct xhci_virt_device {
#define XHCI_MAX_RINGS_CACHED 31
struct xhci_virt_ep eps[31];
struct completion cmd_completion;
- /* Status of the last command issued for this device */
- u32 cmd_status;
- struct list_head cmd_list;
u8 fake_port;
u8 real_port;
struct xhci_interval_bw_table *bw_table;
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists