| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-b5660ba76b41af69a0c09d434927bb4b4cadd4b1@git.kernel.org>
Date: Thu, 27 Feb 2014 08:12:45 -0800
From: "tip-bot for H. Peter Anvin" <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, hpa@...or.com, mingo@...nel.org,
paulmck@...ux.vnet.ibm.com, tglx@...utronix.de,
hpa@...ux.intel.com, rientjes@...gle.com,
paul.gortmaker@...driver.com
Subject: [tip:x86/nuke-platforms] x86, platforms: Remove NUMAQ
Commit-ID: b5660ba76b41af69a0c09d434927bb4b4cadd4b1
Gitweb: http://git.kernel.org/tip/b5660ba76b41af69a0c09d434927bb4b4cadd4b1
Author: H. Peter Anvin <hpa@...ux.intel.com>
AuthorDate: Tue, 25 Feb 2014 12:14:06 -0800
Committer: H. Peter Anvin <hpa@...ux.intel.com>
CommitDate: Thu, 27 Feb 2014 08:07:39 -0800
x86, platforms: Remove NUMAQ
The NUMAQ support seems to be unmaintained, remove it.
Cc: Paul Gortmaker <paul.gortmaker@...driver.com>
Cc: David Rientjes <rientjes@...gle.com>
Acked-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@...ux.intel.com>
Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
---
arch/x86/Kconfig | 36 +--
arch/x86/Kconfig.cpu | 2 +-
arch/x86/include/asm/mmzone_32.h | 3 -
arch/x86/include/asm/mpspec.h | 6 -
arch/x86/include/asm/numaq.h | 171 -------------
arch/x86/kernel/apic/Makefile | 1 -
arch/x86/kernel/apic/numaq_32.c | 524 ---------------------------------------
arch/x86/kernel/cpu/intel.c | 4 -
arch/x86/mm/numa.c | 4 -
arch/x86/pci/Makefile | 1 -
arch/x86/pci/numaq_32.c | 165 ------------
11 files changed, 9 insertions(+), 908 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3c7f6db..e1d0c9a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -346,7 +346,6 @@ config X86_EXTENDED_PLATFORM
for the following (non-PC) 32 bit x86 platforms:
Goldfish (Android emulator)
AMD Elan
- NUMAQ (IBM/Sequent)
RDC R-321x SoC
SGI 320/540 (Visual Workstation)
STA2X11-based (e.g. Northville)
@@ -487,32 +486,18 @@ config X86_32_NON_STANDARD
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
---help---
- This option compiles in the NUMAQ, bigsmp, and STA2X11 default
- subarchitectures. It is intended for a generic binary kernel. If you
- select them all, kernel will probe it one by one and will fallback to
- default.
+ This option compiles in the bigsmp and STA2X11 default
+ subarchitectures. It is intended for a generic binary
+ kernel. If you select them all, kernel will probe it one by
+ one and will fallback to default.
# Alphabetically sorted list of Non standard 32 bit platforms
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- depends on X86_32_NON_STANDARD
- depends on PCI
- select NUMA
- select X86_MPPARSE
- ---help---
- This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
- NUMA multiquad box. This changes the way that processors are
- bootstrapped, and uses Clustered Logical APIC addressing mode instead
- of Flat Logical. You will need a new lynxer.elf file to flash your
- firmware with - send email to <Martin.Bligh@...ibm.com>.
-
config X86_SUPPORTS_MEMORY_FAILURE
def_bool y
# MCE code calls memory_failure():
depends on X86_MCE
# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
- depends on !X86_NUMAQ
# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
depends on X86_64 || !SPARSEMEM
select ARCH_SUPPORTS_MEMORY_FAILURE
@@ -783,7 +768,7 @@ config NR_CPUS
range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
default "1" if !SMP
default "8192" if MAXSMP
- default "32" if SMP && (X86_NUMAQ || X86_BIGSMP)
+ default "32" if SMP && X86_BIGSMP
default "8" if SMP
---help---
This allows you to specify the maximum number of CPUs which this
@@ -1064,13 +1049,11 @@ config X86_CPUID
choice
prompt "High Memory Support"
- default HIGHMEM64G if X86_NUMAQ
default HIGHMEM4G
depends on X86_32
config NOHIGHMEM
bool "off"
- depends on !X86_NUMAQ
---help---
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
However, the address space of 32-bit x86 processors is only 4
@@ -1107,7 +1090,6 @@ config NOHIGHMEM
config HIGHMEM4G
bool "4GB"
- depends on !X86_NUMAQ
---help---
Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM.
@@ -1199,8 +1181,8 @@ config DIRECT_GBPAGES
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP))
- default y if (X86_NUMAQ || X86_BIGSMP)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
+ default y if X86_BIGSMP
---help---
Enable NUMA (Non Uniform Memory Access) support.
@@ -1211,8 +1193,7 @@ config NUMA
For 64-bit this is recommended if the system is Intel Core i7
(or later), AMD Opteron, or EM64T NUMA.
- For 32-bit this is only needed on (rare) 32-bit-only platforms
- that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit
+ For 32-bit this is only needed if you boot a 32-bit
kernel on a 64-bit NUMA platform.
Otherwise, you should say N.
@@ -1258,7 +1239,6 @@ config NODES_SHIFT
range 1 10
default "10" if MAXSMP
default "6" if X86_64
- default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
---help---
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index c026cca..3c6b17b 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -363,7 +363,7 @@ config X86_P6_NOP
config X86_TSC
def_bool y
- depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
+ depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
config X86_CMPXCHG64
def_bool y
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 8a9b3e2..1ec990b 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -11,9 +11,6 @@
#ifdef CONFIG_NUMA
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-
-#include <asm/numaq.h>
-
#endif /* CONFIG_NUMA */
#ifdef CONFIG_DISCONTIGMEM
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 3e6b492..f5a6179 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -25,12 +25,6 @@ extern int pic_mode;
extern unsigned int def_to_bigsmp;
-#ifdef CONFIG_X86_NUMAQ
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-#endif
-
#else /* CONFIG_X86_64: */
#define MAX_MP_BUSSES 256
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
deleted file mode 100644
index c3b3c32..0000000
--- a/arch/x86/include/asm/numaq.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@...ibm.com>
- */
-
-#ifndef _ASM_X86_NUMAQ_H
-#define _ASM_X86_NUMAQ_H
-
-#ifdef CONFIG_X86_NUMAQ
-
-extern int found_numaq;
-extern int numaq_numa_init(void);
-extern int pci_numaq_init(void);
-
-extern void *xquad_portio;
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-/*
- * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
- */
-#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private
- quad space */
-
-/*
- * Communication area for each processor on lynxer-processor tests.
- *
- * NOTE: If you change the size of this eachproc structure you need
- * to change the definition for EACH_QUAD_SIZE.
- */
-struct eachquadmem {
- unsigned int priv_mem_start; /* Starting address of this */
- /* quad's private memory. */
- /* This is always 0. */
- /* In MB. */
- unsigned int priv_mem_size; /* Size of this quad's */
- /* private memory. */
- /* In MB. */
- unsigned int low_shrd_mem_strp_start;/* Starting address of this */
- /* quad's low shared block */
- /* (untranslated). */
- /* In MB. */
- unsigned int low_shrd_mem_start; /* Starting address of this */
- /* quad's low shared memory */
- /* (untranslated). */
- /* In MB. */
- unsigned int low_shrd_mem_size; /* Size of this quad's low */
- /* shared memory. */
- /* In MB. */
- unsigned int lmmio_copb_start; /* Starting address of this */
- /* quad's local memory */
- /* mapped I/O in the */
- /* compatibility OPB. */
- /* In MB. */
- unsigned int lmmio_copb_size; /* Size of this quad's local */
- /* memory mapped I/O in the */
- /* compatibility OPB. */
- /* In MB. */
- unsigned int lmmio_nopb_start; /* Starting address of this */
- /* quad's local memory */
- /* mapped I/O in the */
- /* non-compatibility OPB. */
- /* In MB. */
- unsigned int lmmio_nopb_size; /* Size of this quad's local */
- /* memory mapped I/O in the */
- /* non-compatibility OPB. */
- /* In MB. */
- unsigned int io_apic_0_start; /* Starting address of I/O */
- /* APIC 0. */
- unsigned int io_apic_0_sz; /* Size I/O APIC 0. */
- unsigned int io_apic_1_start; /* Starting address of I/O */
- /* APIC 1. */
- unsigned int io_apic_1_sz; /* Size I/O APIC 1. */
- unsigned int hi_shrd_mem_start; /* Starting address of this */
- /* quad's high shared memory.*/
- /* In MB. */
- unsigned int hi_shrd_mem_size; /* Size of this quad's high */
- /* shared memory. */
- /* In MB. */
- unsigned int mps_table_addr; /* Address of this quad's */
- /* MPS tables from BIOS, */
- /* in system space.*/
- unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */
- /* local access of MDC. */
- unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */
- /* remote access of MDC. */
- unsigned int mm_port_io_start; /* Starting address of this */
- /* quad's memory mapped Port */
- /* I/O space. */
- unsigned int mm_port_io_size; /* Size of this quad's memory*/
- /* mapped Port I/O space. */
- unsigned int mm_rmt_io_apic_start; /* Starting address of this */
- /* quad's memory mapped */
- /* remote I/O APIC space. */
- unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/
- /* mapped remote I/O APIC */
- /* space. */
- unsigned int mm_isa_start; /* Starting address of this */
- /* quad's memory mapped ISA */
- /* space (contains MDC */
- /* memory space). */
- unsigned int mm_isa_size; /* Size of this quad's memory*/
- /* mapped ISA space (contains*/
- /* MDC memory space). */
- unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/
- unsigned int lcl_qmi_addr; /* Local addr to access QMI. */
-};
-
-/*
- * Note: This structure must be NOT be changed unless the multiproc and
- * OS are changed to reflect the new structure.
- */
-struct sys_cfg_data {
- unsigned int quad_id;
- unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */
- unsigned int scd_version; /* Version number of this table. */
- unsigned int first_quad_id;
- unsigned int quads_present31_0; /* 1 bit for each quad */
- unsigned int quads_present63_32; /* 1 bit for each quad */
- unsigned int config_flags;
- unsigned int boot_flags;
- unsigned int csr_start_addr; /* Absolute value (not in MB) */
- unsigned int csr_size; /* Absolute value (not in MB) */
- unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */
- unsigned int lcl_apic_size; /* Absolute value (not in MB) */
- unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */
- unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
- /* may not be totally populated */
- unsigned int split_mem_enbl; /* 0 for no low shared memory */
- unsigned int mmio_sz; /* Size of total system memory mapped I/O */
- /* (in MB). */
- unsigned int quad_spin_lock; /* Spare location used for quad */
- /* bringup. */
- unsigned int nonzero55; /* For checksumming. */
- unsigned int nonzeroaa; /* For checksumming. */
- unsigned int scd_magic_number;
- unsigned int system_type;
- unsigned int checksum;
- /*
- * memory configuration area for each quad
- */
- struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
-};
-
-void numaq_tsc_disable(void);
-
-#endif /* CONFIG_X86_NUMAQ */
-#endif /* _ASM_X86_NUMAQ_H */
-
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 70e1415..dcb5b15 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -18,7 +18,6 @@ obj-y += apic_flat_64.o
endif
# APIC probe will depend on the listing order here
-obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o
# For 32bit, probe_32 need to be listed last
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
deleted file mode 100644
index 030ea1c..0000000
--- a/arch/x86/kernel/apic/numaq_32.c
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@...ibm.com>
- */
-#include <linux/nodemask.h>
-#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-
-#include <asm/processor.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/numaq.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/ipi.h>
-
-int found_numaq;
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_trans {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-static int mpc_record;
-
-static struct mpc_trans *translation_table[MAX_MPC_ENTRY];
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-int quad_local_to_mp_bus_id[NR_CPUS/4][4];
-
-
-static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
-{
- struct eachquadmem *eq = scd->eq + node;
- u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
- u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
- int ret;
-
- node_set(node, numa_nodes_parsed);
- ret = numa_add_memblk(node, start, end);
- BUG_ON(ret < 0);
-}
-
-/*
- * Function: smp_dump_qct()
- *
- * Description: gets memory layout from the quad config table. This
- * function also updates numa_nodes_parsed with the nodes (quads) present.
- */
-static void __init smp_dump_qct(void)
-{
- struct sys_cfg_data *scd;
- int node;
-
- scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
-
- for_each_node(node) {
- if (scd->quads_present31_0 & (1 << node))
- numaq_register_node(node, scd);
- }
-}
-
-void numaq_tsc_disable(void)
-{
- if (!found_numaq)
- return;
-
- if (num_online_nodes() > 1) {
- printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
- setup_clear_cpu_cap(X86_FEATURE_TSC);
- }
-}
-
-static void __init numaq_tsc_init(void)
-{
- numaq_tsc_disable();
-}
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-/* x86_quirks member */
-static int mpc_apic_id(struct mpc_cpu *m)
-{
- int quad = translation_table[mpc_record]->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->apicid);
-
- printk(KERN_DEBUG
- "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->cpufeature & CPU_MODEL_MASK) >> 4,
- m->apicver, quad, logical_apicid);
-
- return logical_apicid;
-}
-
-/* x86_quirks member */
-static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
-{
- int quad = translation_table[mpc_record]->trans_quad;
- int local = translation_table[mpc_record]->trans_local;
-
- mp_bus_id_to_node[m->busid] = quad;
- mp_bus_id_to_local[m->busid] = local;
-
- printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
-}
-
-/* x86_quirks member */
-static void mpc_oem_pci_bus(struct mpc_bus *m)
-{
- int quad = translation_table[mpc_record]->trans_quad;
- int local = translation_table[mpc_record]->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->busid;
-}
-
-/*
- * Called from mpparse code.
- * mode = 0: prescan
- * mode = 1: one mpc entry scanned
- */
-static void numaq_mpc_record(unsigned int mode)
-{
- if (!mode)
- mpc_record = 0;
- else
- mpc_record++;
-}
-
-static void __init MP_translation_info(struct mpc_trans *m)
-{
- printk(KERN_INFO
- "Translation: record %d, type %d, quad %d, global %d, local %d\n",
- mpc_record, m->trans_type, m->trans_quad, m->trans_global,
- m->trans_local);
-
- if (mpc_record >= MAX_MPC_ENTRY)
- printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
- else
- translation_table[mpc_record] = m; /* stash this for later */
-
- if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
- node_set_online(m->trans_quad);
-}
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
- int sum = 0;
-
- while (len--)
- sum += *mp++;
-
- return sum & 0xFF;
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-static void __init smp_read_mpc_oem(struct mpc_table *mpc)
-{
- struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
- int count = sizeof(*oemtable); /* the header size */
- unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
- mpc_record = 0;
- printk(KERN_INFO
- "Found an OEM MPC table at %8p - parsing it...\n", oemtable);
-
- if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
- printk(KERN_WARNING
- "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
- oemtable->signature[0], oemtable->signature[1],
- oemtable->signature[2], oemtable->signature[3]);
- return;
- }
-
- if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
- printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
- return;
- }
-
- while (count < oemtable->length) {
- switch (*oemptr) {
- case MP_TRANSLATION:
- {
- struct mpc_trans *m = (void *)oemptr;
-
- MP_translation_info(m);
- oemptr += sizeof(*m);
- count += sizeof(*m);
- ++mpc_record;
- break;
- }
- default:
- printk(KERN_WARNING
- "Unrecognised OEM table entry type! - %d\n",
- (int)*oemptr);
- return;
- }
- }
-}
-
-static __init void early_check_numaq(void)
-{
- /*
- * get boot-time SMP configuration:
- */
- if (smp_found_config)
- early_get_smp_config();
-
- if (found_numaq) {
- x86_init.mpparse.mpc_record = numaq_mpc_record;
- x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
- x86_init.mpparse.mpc_apic_id = mpc_apic_id;
- x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
- x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
- x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
- x86_init.timers.tsc_pre_init = numaq_tsc_init;
- x86_init.pci.init = pci_numaq_init;
- }
-}
-
-int __init numaq_numa_init(void)
-{
- early_check_numaq();
- if (!found_numaq)
- return -ENOENT;
- smp_dump_qct();
-
- return 0;
-}
-
-#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static inline unsigned int numaq_get_apic_id(unsigned long x)
-{
- return (x >> 24) & 0x0F;
-}
-
-static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
-{
- default_send_IPI_mask_sequence_logical(mask, vector);
-}
-
-static inline void numaq_send_IPI_allbutself(int vector)
-{
- default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
-}
-
-static inline void numaq_send_IPI_all(int vector)
-{
- numaq_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
- */
-static inline void numaq_smp_callin_clear_local_apic(void)
-{
- clear_local_APIC();
-}
-
-static inline const struct cpumask *numaq_target_cpus(void)
-{
- return cpu_all_mask;
-}
-
-static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
-{
- return physid_isset(apicid, *map);
-}
-
-static inline unsigned long numaq_check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline int numaq_apic_id_registered(void)
-{
- return 1;
-}
-
-static inline void numaq_init_apic_ldr(void)
-{
- /* Already done in NUMA-Q firmware */
-}
-
-static inline void numaq_setup_apic_routing(void)
-{
- printk(KERN_INFO
- "Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int numaq_multi_timer_check(int apic, int irq)
-{
- return apic != 0 && irq == 0;
-}
-
-static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
-{
- /* We don't have a good way to do this yet - hack */
- return physids_promote(0xFUL, retmap);
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int numaq_cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < 60)
- return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
- else
- return BAD_APICID;
-}
-
-static inline int numaq_apicid_to_node(int logical_apicid)
-{
- return logical_apicid >> 4;
-}
-
-static int numaq_numa_cpu_node(int cpu)
-{
- int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-
- if (logical_apicid != BAD_APICID)
- return numaq_apicid_to_node(logical_apicid);
- return NUMA_NO_NODE;
-}
-
-static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
-{
- int node = numaq_apicid_to_node(logical_apicid);
- int cpu = __ffs(logical_apicid & 0xf);
-
- physid_set_mask_of_physid(cpu + 4*node, retmap);
-}
-
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-
-static inline int numaq_check_phys_apicid_present(int phys_apicid)
-{
- return 1;
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static int
-numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
- const struct cpumask *andmask,
- unsigned int *apicid)
-{
- *apicid = 0x0F;
- return 0;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-static int
-numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
- if (strncmp(oem, "IBM NUMA", 8))
- printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
- else
- found_numaq = 1;
-
- return found_numaq;
-}
-
-static int probe_numaq(void)
-{
- /* already know from get_memcfg_numaq() */
- return found_numaq;
-}
-
-static void numaq_setup_portio_remap(void)
-{
- int num_quads = num_online_nodes();
-
- if (num_quads <= 1)
- return;
-
- printk(KERN_INFO
- "Remapping cross-quad port I/O for %d quads\n", num_quads);
-
- xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-
- printk(KERN_INFO
- "xquad_portio vaddr 0x%08lx, len %08lx\n",
- (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-/* Use __refdata to keep false positive warning calm. */
-static struct apic __refdata apic_numaq = {
-
- .name = "NUMAQ",
- .probe = probe_numaq,
- .acpi_madt_oem_check = NULL,
- .apic_id_valid = default_apic_id_valid,
- .apic_id_registered = numaq_apic_id_registered,
-
- .irq_delivery_mode = dest_LowestPrio,
- /* physical delivery on LOCAL quad: */
- .irq_dest_mode = 0,
-
- .target_cpus = numaq_target_cpus,
- .disable_esr = 1,
- .dest_logical = APIC_DEST_LOGICAL,
- .check_apicid_used = numaq_check_apicid_used,
- .check_apicid_present = numaq_check_apicid_present,
-
- .vector_allocation_domain = flat_vector_allocation_domain,
- .init_apic_ldr = numaq_init_apic_ldr,
-
- .ioapic_phys_id_map = numaq_ioapic_phys_id_map,
- .setup_apic_routing = numaq_setup_apic_routing,
- .multi_timer_check = numaq_multi_timer_check,
- .cpu_present_to_apicid = numaq_cpu_present_to_apicid,
- .apicid_to_cpu_present = numaq_apicid_to_cpu_present,
- .setup_portio_remap = numaq_setup_portio_remap,
- .check_phys_apicid_present = numaq_check_phys_apicid_present,
- .enable_apic_mode = NULL,
- .phys_pkg_id = numaq_phys_pkg_id,
- .mps_oem_check = numaq_mps_oem_check,
-
- .get_apic_id = numaq_get_apic_id,
- .set_apic_id = NULL,
- .apic_id_mask = 0x0F << 24,
-
- .cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and,
-
- .send_IPI_mask = numaq_send_IPI_mask,
- .send_IPI_mask_allbutself = NULL,
- .send_IPI_allbutself = numaq_send_IPI_allbutself,
- .send_IPI_all = numaq_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
-
- .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi,
- .trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW,
- .trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH,
-
- /* We don't do anything here because we use NMI's to boot instead */
- .wait_for_init_deassert = false,
- .smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic,
- .inquire_remote_apic = NULL,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi_write = native_apic_mem_write,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = native_apic_wait_icr_idle,
- .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
- .x86_32_numa_cpu_node = numaq_numa_cpu_node,
-};
-
-apic_driver(apic_numaq);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 5cd9bfa..ea56e7c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -267,10 +267,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
}
#endif
-#ifdef CONFIG_X86_NUMAQ
- numaq_tsc_disable();
-#endif
-
intel_smp_check(c);
}
#else
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 27aa0455..1d045f9 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -687,10 +687,6 @@ static int __init dummy_numa_init(void)
void __init x86_numa_init(void)
{
if (!numa_off) {
-#ifdef CONFIG_X86_NUMAQ
- if (!numa_init(numaq_numa_init))
- return;
-#endif
#ifdef CONFIG_ACPI_NUMA
if (!numa_init(x86_acpi_numa_init))
return;
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 758b827..5c6fc35 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,7 +13,6 @@ obj-y += legacy.o irq.o
obj-$(CONFIG_STA2X11) += sta2x11-fixup.o
-obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
deleted file mode 100644
index 72c229f..0000000
--- a/arch/x86/pci/numaq_32.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * numaq_32.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <asm/apic.h>
-#include <asm/mpspec.h>
-#include <asm/pci_x86.h>
-#include <asm/numaq.h>
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
- unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
- if (xquad_portio)
- writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
- else
- outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value)
-{
- unsigned long flags;
- void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
- WARN_ON(seg);
- if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
- return -EINVAL;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
-
- write_cf8(bus, devfn, reg);
-
- switch (len) {
- case 1:
- if (xquad_portio)
- *value = readb(adr + (reg & 3));
- else
- *value = inb(0xCFC + (reg & 3));
- break;
- case 2:
- if (xquad_portio)
- *value = readw(adr + (reg & 2));
- else
- *value = inw(0xCFC + (reg & 2));
- break;
- case 4:
- if (xquad_portio)
- *value = readl(adr);
- else
- *value = inl(0xCFC);
- break;
- }
-
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value)
-{
- unsigned long flags;
- void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
- WARN_ON(seg);
- if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
- return -EINVAL;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
-
- write_cf8(bus, devfn, reg);
-
- switch (len) {
- case 1:
- if (xquad_portio)
- writeb(value, adr + (reg & 3));
- else
- outb((u8)value, 0xCFC + (reg & 3));
- break;
- case 2:
- if (xquad_portio)
- writew(value, adr + (reg & 2));
- else
- outw((u16)value, 0xCFC + (reg & 2));
- break;
- case 4:
- if (xquad_portio)
- writel(value, adr + reg);
- else
- outl((u32)value, 0xCFC);
- break;
- }
-
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static const struct pci_raw_ops pci_direct_conf1_mq = {
- .read = pci_conf1_mq_read,
- .write = pci_conf1_mq_write
-};
-
-
-static void pci_fixup_i450nx(struct pci_dev *d)
-{
- /*
- * i450NX -- Find and scan all secondary buses on all PXB's.
- */
- int pxb, reg;
- u8 busno, suba, subb;
- int quad = BUS2QUAD(d->bus->number);
-
- dev_info(&d->dev, "searching for i450NX host bridges\n");
- reg = 0xd0;
- for(pxb=0; pxb<2; pxb++) {
- pci_read_config_byte(d, reg++, &busno);
- pci_read_config_byte(d, reg++, &suba);
- pci_read_config_byte(d, reg++, &subb);
- dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
- pxb, busno, suba, subb);
- if (busno) {
- /* Bus A */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
- }
- if (suba < subb) {
- /* Bus B */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
- }
- }
- pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numaq_init(void)
-{
- int quad;
-
- raw_pci_ops = &pci_direct_conf1_mq;
-
- pcibios_scan_root(0);
- if (num_online_nodes() > 1)
- for_each_online_node(quad) {
- if (quad == 0)
- continue;
- printk("Scanning PCI bus %d for quad %d\n",
- QUADLOCAL2BUS(quad,0), quad);
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
- }
- return 0;
-}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists