[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140227163643.GC24910@lee--X1>
Date: Thu, 27 Feb 2014 16:36:43 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Gabriel FERNANDEZ <gabriel.fernandez@...com>
Cc: mturquette@...aro.org, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, rob@...dley.net, linux@....linux.org.uk,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Pankaj Dev <pankaj.dev@...com>
Subject: Re: [PATCH v0 12/15] ARM: STi: DT: STiH416: 416 DT Entry for
clockgen B/C/D/E/F
> Patch adds DT entries for clockgen B/C/D/E/F
>
> Signed-off-by: Pankaj Dev <pankaj.dev@...com>
You need to add your Signed-off-by too.
> ---
> arch/arm/boot/dts/stih416-clock.dtsi | 170 +++++++++++++++++++++++++++++++++++
> 1 file changed, 170 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
> index f63b0a1..6b2e387 100644
> --- a/arch/arm/boot/dts/stih416-clock.dtsi
> +++ b/arch/arm/boot/dts/stih416-clock.dtsi
> @@ -503,5 +503,175 @@
> /* Remaining outputs unused */
> };
> };
This doesn't look right. Have you indented one tab too far?
> + /*
> + * Frequency synthesizers on the SASG2.
> + *
> + */
Too many *'s
<snip>
> + CLK_S_VCC_HD: CLK_S_VCC_HD {
> + #clock-cells = <0>;
> + compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
> + reg = <0xfe8308b8 4>; /* SYSCFG2558 */
0x4
> + /*
> + * Add a dummy clock for the HDMI PHY for the VCC input mux
> + */
> + CLK_S_TMDS_FROMPHY: CLK_S_TMDS_FROMPHY {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <0>;
What happens when the clock frequency is 0?
> + };
> +
> + CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
> + #clock-cells = <1>;
> + compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
> + reg = <0xfe8308ac 12>; /* SYSCFG2555,2556,2557 */
0x12, or 0x0C, whichever is appropriate.
> + clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
> + <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
One per line would probably be better, save confusing them for pairs.
<snip>
> + /*
> + * Frequency synthesizers on the MPE42
> + */
Alignment.
<snip>
> + CLOCKGEN_F: CLOCKGEN_F {
> + #clock-cells = <1>;
> + compatible = "st,stih416-quadfs660-F", "st,quadfs";
> + reg = <0xfd320878 0xF0>;
> +
> + clocks = <&CLK_SYSIN>;
> + clock-output-names = "CLK_M_MAIN_VIDFS",
> + "CLK_M_HVA_FS",
> + "CLK_M_FVDP_VCPU",
> + "CLK_M_FVDP_PROC_FS";
Tabbing. Ensure you're using tabs (and not spaces) everywhere.
<snip>
> + reg = <0xfd320910 4>; /* SYSCFG8580 */
0x...
Do this for all of the below too.
<snip>
> + clock-output-names =
> + "CLK_M_PIX_MAIN_PIPE", "CLK_M_PIX_AUX_PIPE",
> + "CLK_M_PIX_MAIN_CRU", "CLK_M_PIX_AUX_CRU",
> + "CLK_M_XFER_BE_COMPO", "CLK_M_XFER_PIP_COMPO",
> + "CLK_M_XFER_AUX_COMPO", "CLK_M_VSENS",
> + "CLK_M_PIX_HDMIRX_0", "CLK_M_PIX_HDMIRX_1";
> + };
> };
> };
Something strange going on with these.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists