| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACoXjc=FM5Bohpw6xmD0OCRX40gX2EHzWmf0dXgDosY-Wg8=ZA@mail.gmail.com>
Date: Mon, 3 Mar 2014 16:42:11 -0800
From: Tanmay Inamdar <tinamdar@....com>
To: Tanmay Inamdar <tinamdar@....com>,
Liviu Dudau <Liviu.Dudau@....com>,
linux-pci <linux-pci@...r.kernel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Catalin Marinas <Catalin.Marinas@....com>,
Will Deacon <Will.Deacon@....com>,
linaro-kernel <linaro-kernel@...ts.linaro.org>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
LKML <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
LAKML <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 5/6] pci: Use parent domain number when allocating
child busses.
Hello,
Please see inline.
On Mon, Mar 3, 2014 at 3:51 PM, Liviu Dudau <liviu@...au.co.uk> wrote:
> On Mon, Mar 03, 2014 at 03:14:47PM -0800, Tanmay Inamdar wrote:
>> Hello Liviu,
>>
>> Thanks for fixing up domain_nr. Now I have moved on further to a new
>> domain_nr related warning dump :-)
>>
>> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>> xgene-pcie 1f500000.pcie: (rc) x8 gen-3 link up
>> pci_bus 0001:00: scanning bus
>> pci_setup_device:1101 domain_nr = 1
>> pci 0001:00:00.0: [e008:e004] type 01 class 0x060400
>> pci 0001:00:00.0: reg 0x10: [mem 0x4000000000-0x7fffffffff 64bit]
>> pci 0001:00:00.0: calling xgene_pcie_fixup_bridge+0x0/0x80
>> pci 0001:00:00.0: Hiding X-Gene pci host bridge resources 0001:00:00.0
>> pci 0001:00:00.0: supports D1 D2
>> pci_bus 0001:00: fixups for bus
>> pci 0001:00:00.0: scanning [bus 03-03] behind bridge, pass 0
>> pci 0001:00:00.0: bridge configuration invalid ([bus 03-03]), reconfiguring
>> pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
>> ** pci_scan_bridge:855 pci_domain_nr(bus) = 1
>> ** pci_alloc_child_bus:681 pci_domain_nr(bus) = 1
>> pci_bus 0001:01: scanning bus
>> pci_setup_device:1101 domain_nr = 0
>
> Why does the domain_nr change here?
The bridge device pointer for parent and child should be same right? I
think this is not the case here. Please look at the log at the bottom
that I captured after trying your suggestions.
>
>> pci 0000:01:00.0: [15b3:1003] type 00 class 0x020000
>> pci 0000:01:00.0: reg 0x10: [mem 0x00100000-0x001fffff 64bit]
>> pci 0000:01:00.0: reg 0x18: [mem 0x00800000-0x00ffffff 64bit pref]
>> pci 0000:01:00.0: reg 0x30: [mem 0x01000000-0x010fffff pref]
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 1 at
>> /home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
>> sysfs_warn_dup+0x80/0xc0()
>> sysfs: cannot create duplicate filename '/bus/pci/devices/0000:01:00.0'
>> Modules linked in:
>> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5+ #40
>> Call trace:
>> [<ffffffc000088180>] dump_backtrace+0x0/0x140
>> [<ffffffc0000882d0>] show_stack+0x10/0x20
>> [<ffffffc0004f65ac>] dump_stack+0x74/0xc4
>> [<ffffffc000096e04>] warn_slowpath_common+0x84/0xc0
>> [<ffffffc000096e8c>] warn_slowpath_fmt+0x4c/0x60
>> [<ffffffc0001b83dc>] sysfs_warn_dup+0x7c/0xc0
>> [<ffffffc0001b8894>] sysfs_do_create_link_sd.isra.2+0xf4/0x100
>> [<ffffffc0001b88bc>] sysfs_create_link+0x1c/0x40
>> [<ffffffc0003250b0>] bus_add_device+0x110/0x1c0
>> [<ffffffc000322f1c>] device_add+0x31c/0x520
>> [<ffffffc0002c444c>] pci_device_add+0xec/0x140
>> [<ffffffc0004f1758>] pci_scan_single_device+0x98/0xe0
>> [<ffffffc0002c44e8>] pci_scan_slot+0x48/0x120
>> [<ffffffc0002c5368>] pci_scan_child_bus+0x48/0x140
>> [<ffffffc0002c522c>] pci_scan_bridge+0x4ec/0x5e0
>> [<ffffffc0002c53c8>] pci_scan_child_bus+0xa8/0x140
>> [<ffffffc0004f1b30>] pci_rescan_bus+0x10/0x40
>> [<ffffffc0006a12ac>] xgene_pcie_probe_bridge+0x660/0x72c
>> [<ffffffc000327d20>] platform_drv_probe+0x20/0x60
>> [<ffffffc000325e30>] really_probe+0xf0/0x220
>> [<ffffffc000326080>] __driver_attach+0xa0/0xc0
>> [<ffffffc000323ed4>] bus_for_each_dev+0x54/0xa0
>> [<ffffffc0003258bc>] driver_attach+0x1c/0x40
>> [<ffffffc00032548c>] bus_add_driver+0x14c/0x220
>> [<ffffffc00032683c>] driver_register+0x5c/0x120
>> [<ffffffc000327cdc>] __platform_driver_register+0x5c/0x80
>> [<ffffffc0006a0c40>] xgene_pcie_driver_init+0x14/0x20
>> [<ffffffc0000814c0>] do_one_initcall+0xe0/0x160
>> [<ffffffc00068c934>] kernel_init_freeable+0x134/0x1d8
>> [<ffffffc0004f07ac>] kernel_init+0xc/0xe0
>> ---[ end trace 3ee052d463aab7f3 ]---
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 1 at
>> /home/tinamdar/work/open-source/linux/drivers/pci/probe.c:1380
>> pci_device_add+0x128/0x140()
>> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>
>> I have made a small fix above your patch. After the fix is applied,
>> dumps are gone and the enumeration finishes up smoothly for all the
>> ports.
>> Since the change is small, just pasting it here. Please review and
>> apply if it's clean.
>
> Honestly, I have no idea. I kept staring at the code for a better part of an hour
> trying to decipher what the intent of the code was, without too much progress. I
> still don't understand why the code in pci_alloc_child_bus() takes a shortcut when
> the bridge argument is NULL when in my opinion it should use parent->bridge instead
> and continue as normal.
>
>>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index a12cda5..aac8366 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -693,7 +693,7 @@ static struct pci_bus *pci_alloc_child_bus(struct
>> pci_bus *parent,
>> }
>>
>> child->self = bridge;
>> - child->bridge = get_device(&bridge->dev);
>> + child->bridge = get_device(parent->bridge);
>> child->dev.parent = child->bridge;
>
> Hmm, not sure why this is needed. What does get_device(&bridge->dev)
> return for you? The next line sets child->dev.parent to child->bridge,
> but with your change I'm not sure we end up using the correct parent.
>
> Can you try to revert your change and modify the implementation of pci_domain_nr() in arm64
> to look like this:
>
> static inline int pci_domain_nr(struct pci_bus *bus)
> {
> struct pci_host_bridge *bridge;
>
> while (bus->parent)
> bus = bus->parent;
>
> bridge = to_pci_host_bridge(bus->bridge);
> if (bridge)
> return bridge->domain_nr;
>
> return 0;
> }
>
This did not work for me.
> Please let me know what results you get.
>
I am printing following values
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index a12cda5..c89f86a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -695,6 +695,8 @@ static struct pci_bus *pci_alloc_child_bus(struct
pci_bus *parent,
child->self = bridge;
child->bridge = get_device(&bridge->dev);
child->dev.parent = child->bridge;
+ printk("%s:%d bus = %p , bridge_dev = %p, domain = %d\n",
+ __func__, __LINE__, child, child->bridge,
pci_domain_nr(parent));
pci_set_bus_of_node(child);
pci_set_bus_speed(child);
@@ -1095,6 +1097,8 @@ int pci_setup_device(struct pci_dev *dev)
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
+ printk("%s:%d bus = %p , bridge_dev = %p, domain = %d\n",
+ __func__, __LINE__, dev->bus, dev->bus->bridge,
pci_domain_nr(dev->bus));
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->revision = class & 0xff;
Following looks suspicious to me.
bridge_dev = ffffffc7e03ffc00 for bus 0 in domain 1 while bridge_dev =
ffffffc7e03f7098 for bus 1 in domain 1.
Log -->
-----------------------------------------------------------------------------------------------------------------------------
xgene-pcie 1f500000.pcie: (rc) x8 gen-3 link up
pci_bus 0001:00: scanning bus
pci_setup_device:1101 bus = ffffffc7e0060400 , bridge_dev =
ffffffc7e03ffc00, domain = 1
pci 0001:00:00.0: [e008:e004] type 01 class 0x060400
pci 0001:00:00.0: reg 0x10: [mem 0x4000000000-0x7fffffffff 64bit]
pci 0001:00:00.0: calling xgene_pcie_fixup_bridge+0x0/0x80
pci 0001:00:00.0: Hiding X-Gene pci host bridge resources 0001:00:00.0
pci 0001:00:00.0: supports D1 D2
pci_bus 0001:00: fixups for bus
pci 0001:00:00.0: scanning [bus 03-03] behind bridge, pass 0
pci 0001:00:00.0: bridge configuration invalid ([bus 03-03]), reconfiguring
pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_alloc_child_bus:699 bus = ffffffc7e0063000 , bridge_dev =
ffffffc7e03f7098, domain = 1
pci_bus 0001:01: scanning bus
pci_setup_device:1101 bus = ffffffc7e0063000 , bridge_dev =
ffffffc7e03f7098, domain = 0
pci 0000:01:00.0: [15b3:1003] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0x00100000-0x001fffff 64bit]
pci 0000:01:00.0: reg 0x18: [mem 0x00800000-0x00ffffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0x01000000-0x010fffff pref]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at
/home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
sysfs_warn_dup+0x80/0xc0()
sysfs: cannot create duplicate filename '/bus/pci/devices/0000:01:00.0'
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5+ #50
-----------------------------------------------------------------------------------------------------------------------------
> Best regards,
> Liviu
>
>
>> pci_set_bus_of_node(child);
>> pci_set_bus_speed(child);
>>
>> Thanks,
>> Tanmay
>>
>> On Mon, Mar 3, 2014 at 9:33 AM, Liviu Dudau <Liviu.Dudau@....com> wrote:
>> > pci_alloc_child_bus() uses the newly allocated child bus to figure
>> > out the domain number that is going to use for setting the device
>> > name. A better option is to use the parent bus domain number.
>> >
>> > Signed-off-by: Liviu Dudau <Liviu.Dudau@....com>
>> >
>> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> > index 26237a0..a12cda5 100644
>> > --- a/drivers/pci/probe.c
>> > +++ b/drivers/pci/probe.c
>> > @@ -677,7 +677,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
>> > * now as the parent is not properly set up yet.
>> > */
>> > child->dev.class = &pcibus_class;
>> > - dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
>> > + dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(parent), busnr);
>> >
>> > /*
>> > * Set up the primary, secondary and subordinate
>> > --
>> > 1.9.0
>> >
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> -------------------
> .oooO
> ( )
> \ ( Oooo.
> \_) ( )
> ) /
> (_/
>
> One small step
> for me ...
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists