| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140304001224.GD9679@jonmason-lab>
Date: Mon, 3 Mar 2014 17:12:25 -0700
From: Jon Mason <jon.mason@...el.com>
To: Alexander Gordeev <agordeev@...hat.com>
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH v2 3/4] ntb: Split ntb_setup_msix() into separate BWD/SNB
routines
On Fri, Feb 21, 2014 at 04:49:31PM +0100, Alexander Gordeev wrote:
> This is an cleanup effort to make ntb_setup_msix() more
> readable - use ntb_setup_bwd_msix() to init MSI-Xs on
> BWD hardware and ntb_setup_snb_msix() - on SNB hardware.
>
> Function ntb_setup_snb_msix() also initializes MSI-Xs the
> way it should has been done - looping pci_enable_msix()
> until success or failure.
>
> Signed-off-by: Alexander Gordeev <agordeev@...hat.com>
> Cc: Jon Mason <jon.mason@...el.com>
> Cc: linux-pci@...r.kernel.org
> ---
> drivers/ntb/ntb_hw.c | 170 +++++++++++++++++++++++++++++++-------------------
> 1 files changed, 106 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
> index 53468f4..0472045 100644
> --- a/drivers/ntb/ntb_hw.c
> +++ b/drivers/ntb/ntb_hw.c
> @@ -1079,6 +1079,107 @@ static irqreturn_t ntb_interrupt(int irq, void *dev)
> return IRQ_HANDLED;
> }
>
> +static int ntb_setup_snb_msix(struct ntb_device *ndev, int msix_entries)
> +{
> + struct pci_dev *pdev = ndev->pdev;
> + struct msix_entry *msix;
> + int rc, i;
> +
> + if (msix_entries < SNB_MSIX_CNT)
I would prefer ndev->limits.msix_cnt here to keep it generic. I could
foresee this number changing on upcoming hardware with a similar
design.
> + return -ENOSPC;
> +
> + rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
> + if (rc < 0)
> + return rc;
> + else if (rc > 0)
> + return -ENOSPC;
> +
> + for (i = 0; i < msix_entries; i++) {
> + msix = &ndev->msix_entries[i];
> + WARN_ON(!msix->vector);
> +
> + if (i == msix_entries - 1) {
> + rc = request_irq(msix->vector,
> + xeon_event_msix_irq, 0,
> + "ntb-event-msix", ndev);
> + if (rc)
> + goto err;
> + } else {
> + rc = request_irq(msix->vector,
> + xeon_callback_msix_irq, 0,
> + "ntb-callback-msix",
> + &ndev->db_cb[i]);
> + if (rc)
> + goto err;
> + }
> + }
> +
> + ndev->num_msix = msix_entries;
> + ndev->max_cbs = msix_entries - 1;
> +
> + return 0;
> +
> +err:
> + while (--i >= 0) {
> + msix = &ndev->msix_entries[i];
> + WARN_ON(i == ndev->num_msix - 1);
> +
> + if (i == ndev->num_msix - 1)
Why have a WARN followed by a if statement on the same condition? As
it stands right now, there is no way it could be hit. So I'd say
remove both of them.
Aside from that it looks good. Thanks for taking the time to cleanup
the code!
Thanks,
Jon
> + free_irq(msix->vector, ndev);
> + else
> + free_irq(msix->vector, &ndev->db_cb[i]);
> + }
> +
> + pci_disable_msix(pdev);
> + ndev->num_msix = 0;
> +
> + return rc;
> +}
> +
> +static int ntb_setup_bwd_msix(struct ntb_device *ndev, int msix_entries)
> +{
> + struct pci_dev *pdev = ndev->pdev;
> + struct msix_entry *msix;
> + int rc, i;
> +
> +retry:
> + rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
> + if (rc < 0)
> + return rc;
> + else if (rc > 0) {
> + dev_warn(&pdev->dev,
> + "Only %d MSI-X vectors. "
> + "Limiting the number of queues to that number.\n",
> + rc);
> + msix_entries = rc;
> + goto retry;
> + }
> +
> + for (i = 0; i < msix_entries; i++) {
> + msix = &ndev->msix_entries[i];
> + WARN_ON(!msix->vector);
> +
> + rc = request_irq(msix->vector, bwd_callback_msix_irq, 0,
> + "ntb-callback-msix", &ndev->db_cb[i]);
> + if (rc)
> + goto err;
> + }
> +
> + ndev->num_msix = msix_entries;
> + ndev->max_cbs = msix_entries;
> +
> + return 0;
> +
> +err:
> + while (--i >= 0)
> + free_irq(msix->vector, &ndev->db_cb[i]);
> +
> + pci_disable_msix(pdev);
> + ndev->num_msix = 0;
> +
> + return rc;
> +}
> +
> static int ntb_setup_msix(struct ntb_device *ndev)
> {
> struct pci_dev *pdev = ndev->pdev;
> @@ -1105,78 +1206,19 @@ static int ntb_setup_msix(struct ntb_device *ndev)
> for (i = 0; i < msix_entries; i++)
> ndev->msix_entries[i].entry = i;
>
> - rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
> - if (rc < 0)
> - goto err1;
> - if (rc > 0) {
> - /* On SNB, the link interrupt is always tied to 4th vector. If
> - * we can't get all 4, then we can't use MSI-X.
> - */
> - if (ndev->hw_type != BWD_HW) {
> - rc = -EIO;
> - goto err1;
> - }
> -
> - dev_warn(&pdev->dev,
> - "Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
> - rc);
> - msix_entries = rc;
> -
> - rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
> - if (rc)
> - goto err1;
> - }
> -
> - for (i = 0; i < msix_entries; i++) {
> - msix = &ndev->msix_entries[i];
> - WARN_ON(!msix->vector);
> -
> - /* Use the last MSI-X vector for Link status */
> - if (ndev->hw_type == BWD_HW) {
> - rc = request_irq(msix->vector, bwd_callback_msix_irq, 0,
> - "ntb-callback-msix", &ndev->db_cb[i]);
> - if (rc)
> - goto err2;
> - } else {
> - if (i == msix_entries - 1) {
> - rc = request_irq(msix->vector,
> - xeon_event_msix_irq, 0,
> - "ntb-event-msix", ndev);
> - if (rc)
> - goto err2;
> - } else {
> - rc = request_irq(msix->vector,
> - xeon_callback_msix_irq, 0,
> - "ntb-callback-msix",
> - &ndev->db_cb[i]);
> - if (rc)
> - goto err2;
> - }
> - }
> - }
> -
> - ndev->num_msix = msix_entries;
> if (ndev->hw_type == BWD_HW)
> - ndev->max_cbs = msix_entries;
> + rc = ntb_setup_bwd_msix(ndev, msix_entries);
> else
> - ndev->max_cbs = msix_entries - 1;
> + rc = ntb_setup_snb_msix(ndev, msix_entries);
> + if (rc)
> + goto err1;
>
> return 0;
>
> -err2:
> - while (--i >= 0) {
> - msix = &ndev->msix_entries[i];
> - if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1)
> - free_irq(msix->vector, ndev);
> - else
> - free_irq(msix->vector, &ndev->db_cb[i]);
> - }
> - pci_disable_msix(pdev);
> err1:
> kfree(ndev->msix_entries);
> - dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n");
> err:
> - ndev->num_msix = 0;
> + dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n");
> return rc;
> }
>
> --
> 1.7.7.6
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists