Message-Id: <1393961226-25618-3-git-send-email-gdjakov@mm-sol.com>
Date:	Tue,  4 Mar 2014 21:27:05 +0200
From:	Georgi Djakov <gdjakov@...sol.com>
To:	linux-mmc@...r.kernel.org, cjb@...top.org, ulf.hansson@...aro.org,
	devicetree@...r.kernel.org, grant.likely@...aro.org,
	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	swarren@...dotorg.org, ijc+devicetree@...lion.org.uk,
	galak@...eaurora.org, rob@...dley.net
Cc:	linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org, Georgi Djakov <gdjakov@...sol.com>
Subject: [PATCH v10 2/3] mmc: sdhci-msm: Initial support for Qualcomm chipsets

This platform driver adds the initial support of Secure
Digital Host Controller Interface compliant controller
found in Qualcomm chipsets.

Signed-off-by: Asutosh Das <asutoshd@...eaurora.org>
Signed-off-by: Venkat Gopalakrishnan <venkatg@...eaurora.org>
Tested-by: Ivan T. Ivanov <iivanov@...sol.com>
Signed-off-by: Georgi Djakov <gdjakov@...sol.com>
---
 drivers/mmc/host/Kconfig     |   13 ++
 drivers/mmc/host/Makefile    |    1 +
 drivers/mmc/host/sdhci-msm.c |  427 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 441 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-msm.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 82cc34d..66ef8b9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -334,6 +334,19 @@ config MMC_ATMELMCI
 
 	  If unsure, say N.
 
+config MMC_SDHCI_MSM
+	tristate "Qualcomm SDHCI Controller Support"
+	depends on ARCH_QCOM
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  support present in Qualcomm SOCs. The controller supports
+	  SD/MMC/SDIO devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_MSM
 	tristate "Qualcomm SDCC Controller Support"
 	depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f162f87a0..0c8aa5e 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
new file mode 100644
index 0000000..46e4e0b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -0,0 +1,427 @@
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE		0x78
+#define HC_MODE_EN		0x1
+
+#define CORE_POWER		0x0
+#define CORE_SW_RST		BIT(7)
+
+#define CORE_PWRCTL_STATUS	0xdc
+#define CORE_PWRCTL_MASK	0xe0
+#define CORE_PWRCTL_CLEAR	0xe4
+#define CORE_PWRCTL_CTL		0xe8
+
+#define CORE_PWRCTL_BUS_OFF	BIT(0)
+#define CORE_PWRCTL_BUS_ON	BIT(1)
+#define CORE_PWRCTL_IO_LOW	BIT(2)
+#define CORE_PWRCTL_IO_HIGH	BIT(3)
+
+#define CORE_PWRCTL_BUS_SUCCESS	BIT(0)
+#define CORE_PWRCTL_BUS_FAIL	BIT(1)
+#define CORE_PWRCTL_IO_SUCCESS	BIT(2)
+#define CORE_PWRCTL_IO_FAIL	BIT(3)
+
+#define INT_MASK		0xf
+
+#define QCOM_SDHCI_VOLTAGE_LOW	1800000
+#define QCOM_SDHCI_VOLTAGE_HIGH	2950000
+
+
+struct sdhci_msm_pltfm_data {
+	u32 caps;				/* Supported UHS-I Modes */
+	u32 caps2;				/* More capabilities */
+	struct regulator *vdd;			/* VDD/VCC regulator */
+	struct regulator *vdd_io;		/* VDD IO regulator */
+};
+
+struct sdhci_msm_host {
+	struct platform_device *pdev;
+	void __iomem *core_mem;	/* MSM SDCC mapped address */
+	int pwr_irq;		/* power irq */
+	struct clk *clk;	/* main SD/MMC bus clock */
+	struct clk *pclk;	/* SDHC peripheral bus clock */
+	struct clk *bus_clk;	/* SDHC bus voter clock */
+	struct sdhci_msm_pltfm_data pdata;
+	struct mmc_host *mmc;
+	struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* MSM platform specific tuning */
+int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	/*
+	 * Tuning is required for SDR104, HS200 and HS400 cards and if the clock
+	 * frequency greater than 100MHz in those modes. The standard tuning
+	 * procedure should not be executed, but a custom implementation will be
+	 * added here instead.
+	 */
+	return 0;
+}
+
+static int sdhci_msm_vreg_enable(struct device *dev, struct regulator *vreg)
+{
+	int ret = 0;
+
+	if (!regulator_is_enabled(vreg)) {
+		/* Set voltage level */
+		ret = regulator_set_voltage(vreg, QCOM_SDHCI_VOLTAGE_HIGH,
+					    QCOM_SDHCI_VOLTAGE_HIGH);
+		if (ret)
+			return ret;
+	}
+
+	ret = regulator_enable(vreg);
+	if (ret)
+		dev_err(dev, "Failed to enable regulator (%d)\n", ret);
+
+	return ret;
+}
+
+static int sdhci_msm_vreg_disable(struct device *dev, struct regulator *vreg)
+{
+	int ret = 0;
+
+	if (!regulator_is_enabled(vreg))
+		return ret;
+
+	/* Set min. voltage to 0 */
+	ret = regulator_set_voltage(vreg, 0, QCOM_SDHCI_VOLTAGE_HIGH);
+	if (ret)
+		return ret;
+
+	ret = regulator_disable(vreg);
+	if (ret)
+		dev_err(dev, "Failed to disable regulator (%d)\n", ret);
+
+	return ret;
+}
+
+static int sdhci_msm_setup_vreg(struct sdhci_msm_host *msm_host, bool enable)
+{
+	int ret;
+
+	if (enable) {
+		ret = sdhci_msm_vreg_enable(&msm_host->pdev->dev,
+				msm_host->pdata.vdd);
+		ret |= sdhci_msm_vreg_enable(&msm_host->pdev->dev,
+				msm_host->pdata.vdd_io);
+	} else {
+		ret = sdhci_msm_vreg_disable(&msm_host->pdev->dev,
+				msm_host->pdata.vdd);
+		ret |= sdhci_msm_vreg_disable(&msm_host->pdev->dev,
+				msm_host->pdata.vdd_io);
+	}
+
+	return ret;
+}
+
+static int sdhci_msm_vreg_init(struct device *dev,
+			       struct sdhci_msm_pltfm_data *pdata)
+{
+	pdata->vdd = devm_regulator_get(dev, "vdd-supply");
+	if (IS_ERR(pdata->vdd))
+		return PTR_ERR(pdata->vdd);
+
+	pdata->vdd_io = devm_regulator_get(dev, "vdd-io-supply");
+	if (IS_ERR(pdata->vdd_io))
+		return PTR_ERR(pdata->vdd_io);
+
+	return 0;
+}
+
+static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
+{
+	struct sdhci_host *host = (struct sdhci_host *)data;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = pltfm_host->priv;
+	u8 irq_status;
+	u8 irq_ack = 0;
+	int ret = 0;
+
+	irq_status = readb_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
+	dev_dbg(mmc_dev(msm_host->mmc), "%s: Received IRQ(%d), status=0x%x\n",
+		mmc_hostname(msm_host->mmc), irq, irq_status);
+
+	/* Clear the interrupt */
+	writeb_relaxed(irq_status, (msm_host->core_mem + CORE_PWRCTL_CLEAR));
+
+	/* Ensure that the write has reached the device */
+	mb();
+
+	if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF)) {
+		/* Handle BUS ON/OFF */
+		bool bus_on = (irq_status & CORE_PWRCTL_BUS_ON) ? 1 : 0;
+
+		ret = sdhci_msm_setup_vreg(msm_host, bus_on);
+	} else if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH)) {
+		/* Handle IO LOW/HIGH */
+		int io_high = (irq_status & CORE_PWRCTL_IO_HIGH) ? 1 : 0;
+
+		if (io_high) {
+			ret = regulator_set_voltage(msm_host->pdata.vdd_io,
+					QCOM_SDHCI_VOLTAGE_HIGH,
+					QCOM_SDHCI_VOLTAGE_HIGH);
+		} else {
+			ret = regulator_set_voltage(msm_host->pdata.vdd_io,
+					QCOM_SDHCI_VOLTAGE_LOW,
+					QCOM_SDHCI_VOLTAGE_LOW);
+		}
+	}
+
+	if (ret)
+		irq_ack = CORE_PWRCTL_BUS_FAIL;
+	else
+		irq_ack = CORE_PWRCTL_BUS_SUCCESS;
+
+	/* ACK status to the core */
+	writeb_relaxed(irq_ack, (msm_host->core_mem + CORE_PWRCTL_CTL));
+
+	/* Commit the write to the device */
+	mb();
+
+	dev_dbg(mmc_dev(msm_host->mmc), "%s: Handled IRQ(%d), ret=%d, ack=0x%x\n",
+		 mmc_hostname(msm_host->mmc), irq, ret, irq_ack);
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+	{ .compatible = "qcom,sdhci-msm-v4" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+	.platform_execute_tuning = sdhci_msm_execute_tuning,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_msm_host *msm_host;
+	struct resource *core_memres;
+	int ret, dead;
+	u16 host_version;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "No device tree data\n");
+		return -ENOENT;
+	}
+
+	msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+	if (!msm_host)
+		return -ENOMEM;
+
+	msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+	host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = msm_host;
+	msm_host->mmc = host->mmc;
+	msm_host->pdev = pdev;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed parsing mmc device tree\n");
+		goto pltfm_free;
+	}
+
+	sdhci_get_of_property(pdev);
+
+	/* Setup SDCC bus voter clock. */
+	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (!IS_ERR(msm_host->bus_clk)) {
+		/* Vote for max. clk rate for max. performance */
+		ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+		if (ret)
+			goto pltfm_free;
+		ret = clk_prepare_enable(msm_host->bus_clk);
+		if (ret)
+			goto pltfm_free;
+	}
+
+	/* Setup main peripheral bus clock */
+	msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(msm_host->pclk)) {
+		ret = PTR_ERR(msm_host->pclk);
+		dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+		goto bus_clk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->pclk);
+	if (ret)
+		goto bus_clk_disable;
+
+	/* Setup SDC MMC clock */
+	msm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(msm_host->clk)) {
+		ret = PTR_ERR(msm_host->clk);
+		dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
+		goto pclk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->clk);
+	if (ret)
+		goto pclk_disable;
+
+	/* Setup regulators */
+	ret = sdhci_msm_vreg_init(&pdev->dev, &msm_host->pdata);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Regulator setup failed (%d)\n", ret);
+		goto clk_disable;
+	}
+
+	core_memres = platform_get_resource_byname(pdev,
+						   IORESOURCE_MEM, "core_mem");
+	msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+	if (IS_ERR(msm_host->core_mem)) {
+		dev_err(&pdev->dev, "Failed to remap registers\n");
+		ret = PTR_ERR(msm_host->core_mem);
+		goto clk_disable;
+	}
+
+	/* Reset the core and Enable SDHC mode */
+	writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+		       CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+	/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+	usleep_range(1000, 5000);
+	if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+		dev_err(&pdev->dev, "Stuck in reset\n");
+		ret = -ETIMEDOUT;
+		goto clk_disable;
+	}
+
+	/* Set HC_MODE_EN bit in HC_MODE register */
+	writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+	/*
+	 * Following are the deviations from SDHC spec v3.0 -
+	 * 1. Card detection is handled using separate GPIO.
+	 * 2. Bus power control is handled by interacting with PMIC.
+	 */
+	host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+	host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+	dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+		host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+			       SDHCI_VENDOR_VER_SHIFT));
+
+	/* Setup PWRCTL irq */
+	msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
+	if (msm_host->pwr_irq < 0) {
+		dev_err(&pdev->dev, "Failed to get pwr_irq by name (%d)\n",
+			msm_host->pwr_irq);
+		goto clk_disable;
+	}
+	ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
+					sdhci_msm_pwr_irq, IRQF_ONESHOT,
+					dev_name(&pdev->dev), host);
+	if (ret) {
+		dev_err(&pdev->dev, "Request threaded irq(%d) failed (%d)\n",
+			msm_host->pwr_irq, ret);
+		goto clk_disable;
+	}
+
+	/* Enable power irq */
+	writel_relaxed(INT_MASK, (msm_host->core_mem + CORE_PWRCTL_MASK));
+
+	msm_host->mmc->caps |= msm_host->pdata.caps;
+	msm_host->mmc->caps2 |= msm_host->pdata.caps2;
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(&pdev->dev, "Add host failed (%d)\n", ret);
+		goto vreg_disable;
+	}
+
+	ret = clk_set_rate(msm_host->clk, host->max_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "MClk rate set failed (%d)\n", ret);
+		goto remove_host;
+	}
+
+	return 0;
+
+remove_host:
+	dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+	sdhci_remove_host(host, dead);
+vreg_disable:
+	sdhci_msm_vreg_disable(&pdev->dev, msm_host->pdata.vdd);
+	sdhci_msm_vreg_disable(&pdev->dev, msm_host->pdata.vdd_io);
+clk_disable:
+	clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+	clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = pltfm_host->priv;
+	int dead;
+
+	/* Disable power irq */
+	writel_relaxed(~INT_MASK, (msm_host->core_mem + CORE_PWRCTL_MASK));
+
+	dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+	sdhci_msm_vreg_disable(&pdev->dev, msm_host->pdata.vdd);
+	sdhci_msm_vreg_disable(&pdev->dev, msm_host->pdata.vdd_io);
+	clk_disable_unprepare(msm_host->clk);
+	clk_disable_unprepare(msm_host->pclk);
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+	return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+	.probe = sdhci_msm_probe,
+	.remove = sdhci_msm_remove,
+	.driver = {
+		   .name = "sdhci_msm",
+		   .owner = THIS_MODULE,
+		   .of_match_table = sdhci_msm_dt_match,
+	},
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists