| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1394027146.24352.7.camel@AMDC1943>
Date: Wed, 05 Mar 2014 14:45:46 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Robert Baldyga <r.baldyga@...sung.com>
Cc: sameo@...ux.intel.com, lee.jones@...aro.org,
myungjoo.ham@...sung.com, cw00.choi@...sung.com,
dmitry.torokhov@...il.com, cooloney@...il.com, rpurdie@...ys.net,
dbaryshkov@...il.com, dwmw2@...radead.org, lgirdwood@...il.com,
broonie@...nel.org, a.zummo@...ertech.it,
paul.gortmaker@...driver.com, linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org, linux-leds@...r.kernel.org,
rtc-linux@...glegroups.com, m.szyprowski@...sung.com
Subject: Re: [PATCH] mfd: max8997: use regmap to access registers
Hi,
>
> This patch modifies max8997 driver and each associated function driver,
> to use regmap instead of operating directly on i2c bus. It will allow to
> simplify IRQ handling using regmap-irq.
>
> Signed-off-by: Robert Baldyga <r.baldyga@...sung.com>
(...)
> diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
> index be88a3b..bd14c7d 100644
> --- a/drivers/mfd/max8997.c
> +++ b/drivers/mfd/max8997.c
> @@ -33,6 +33,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mfd/max8997.h>
> #include <linux/mfd/max8997-private.h>
> +#include <linux/regmap.h>
>
> #define I2C_ADDR_PMIC (0xCC >> 1)
> #define I2C_ADDR_MUIC (0x4A >> 1)
> @@ -57,82 +58,82 @@ static struct of_device_id max8997_pmic_dt_match[] = {
> };
> #endif
>
> -int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
> +int max8997_read_reg(struct regmap *map, u8 reg, u8 *dest)
> {
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> + unsigned int val;
> int ret;
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> + ret = regmap_read(map, reg, &val);
> + *dest = val;
>
> - ret &= 0xff;
> - *dest = ret;
> - return 0;
> + return ret;
> }
> EXPORT_SYMBOL_GPL(max8997_read_reg);
>
> -int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> +int max8997_bulk_read(struct regmap *map, u8 reg, int count, u8 *buf)
> {
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> int ret;
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> + ret = regmap_bulk_read(map, reg, buf, count);
>
> - return 0;
> + return ret;
> }
> EXPORT_SYMBOL_GPL(max8997_bulk_read);
>
> -int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
> +int max8997_write_reg(struct regmap *map, u8 reg, u8 value)
> {
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> int ret;
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_byte_data(i2c, reg, value);
> - mutex_unlock(&max8997->iolock);
> + ret = regmap_write(map, reg, value);
> +
> return ret;
> }
> EXPORT_SYMBOL_GPL(max8997_write_reg);
>
> -int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
> +int max8997_bulk_write(struct regmap *map, u8 reg, int count, u8 *buf)
> {
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> int ret;
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_write_i2c_block_data(i2c, reg, count, buf);
> - mutex_unlock(&max8997->iolock);
> - if (ret < 0)
> - return ret;
> + ret = regmap_bulk_write(map, reg, buf, count);
>
> - return 0;
> + return ret;
> }
> EXPORT_SYMBOL_GPL(max8997_bulk_write);
>
> -int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
> +int max8997_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask)
> {
> - struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
> int ret;
>
> - mutex_lock(&max8997->iolock);
> - ret = i2c_smbus_read_byte_data(i2c, reg);
> - if (ret >= 0) {
> - u8 old_val = ret & 0xff;
> - u8 new_val = (val & mask) | (old_val & (~mask));
> - ret = i2c_smbus_write_byte_data(i2c, reg, new_val);
> - }
> - mutex_unlock(&max8997->iolock);
> + ret = regmap_update_bits(map, reg, mask, val);
> +
> return ret;
> }
> EXPORT_SYMBOL_GPL(max8997_update_reg);
>
> +static const struct regmap_config max8997_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_REG_PMIC_END,
> +};
> +
> +static const struct regmap_config max8997_regmap_rtc_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_RTC_REG_END,
> +};
> +
> +static const struct regmap_config max8997_regmap_haptic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_HAPTIC_REG_END,
> +};
> +
> +static const struct regmap_config max8997_regmap_muic_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX8997_MUIC_REG_END,
> +};
> +
> /*
> * Only the common platform data elements for max8997 are parsed here from the
> * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
> @@ -184,6 +185,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>
> max8997 = devm_kzalloc(&i2c->dev, sizeof(struct max8997_dev),
> GFP_KERNEL);
> +
> if (max8997 == NULL)
> return -ENOMEM;
>
This new line was added on purpose?
> @@ -202,6 +204,14 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
> if (!pdata)
> return ret;
>
> + max8997->regmap = devm_regmap_init_i2c(i2c, &max8997_regmap_config);
> + if (IS_ERR(max8997->regmap)) {
> + ret = PTR_ERR(max8997->regmap);
> + dev_err(max8997->dev, "failed to allocate register map: %d\n",
> + ret);
> + return ret;
> + }
> +
> max8997->pdata = pdata;
> max8997->ono = pdata->ono;
>
> @@ -209,11 +219,22 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
>
> max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
> i2c_set_clientdata(max8997->rtc, max8997);
> +
> max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
> i2c_set_clientdata(max8997->haptic, max8997);
> +
> max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
> i2c_set_clientdata(max8997->muic, max8997);
>
> + max8997->regmap_rtc = devm_regmap_init_i2c(max8997->rtc,
> + &max8997_regmap_rtc_config);
> +
> + max8997->regmap_haptic = devm_regmap_init_i2c(max8997->haptic,
> + &max8997_regmap_haptic_config);
> +
> + max8997->regmap_muic = devm_regmap_init_i2c(max8997->muic,
> + &max8997_regmap_muic_config);
> +
> pm_runtime_set_active(max8997->dev);
>
> max8997_irq_init(max8997);
Return value of each devm_regmap_init_i2c() should be checked here.
> @@ -423,15 +444,15 @@ static int max8997_freeze(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_pmic[i],
> + max8997_read_reg(max8997->regmap, max8997_dumpaddr_pmic[i],
> &max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_muic[i],
> + max8997_read_reg(max8997->regmap, max8997_dumpaddr_muic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
>
Shouldn't regmap_muic be used here? You will be reading
MAX8997_MUIC_REG* registers.
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_read_reg(i2c, max8997_dumpaddr_haptic[i],
> + max8997_read_reg(max8997->regmap, max8997_dumpaddr_haptic[i],
> &max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
Same, but regmap_haptic?
>
> @@ -445,15 +466,15 @@ static int max8997_restore(struct device *dev)
> int i;
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_pmic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_pmic[i],
> + max8997_write_reg(max8997->regmap, max8997_dumpaddr_pmic[i],
> max8997->reg_dump[i]);
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_muic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_muic[i],
> + max8997_write_reg(max8997->regmap, max8997_dumpaddr_muic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END]);
Same, as above - regmap_muic.
>
> for (i = 0; i < ARRAY_SIZE(max8997_dumpaddr_haptic); i++)
> - max8997_write_reg(i2c, max8997_dumpaddr_haptic[i],
> + max8997_write_reg(max8997->regmap, max8997_dumpaddr_haptic[i],
> max8997->reg_dump[i + MAX8997_REG_PMIC_END +
> MAX8997_MUIC_REG_END]);
Same, as above - regmap_haptic.
>
> diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
> index 4bdedfe..027e9bf 100644
> --- a/drivers/power/max8997_charger.c
> +++ b/drivers/power/max8997_charger.c
> @@ -46,14 +46,14 @@ static int max8997_battery_get_property(struct power_supply *psy,
> {
> struct charger_data *charger = container_of(psy,
> struct charger_data, battery);
> - struct i2c_client *i2c = charger->iodev->i2c;
> int ret;
> u8 reg;
>
> switch (psp) {
> case POWER_SUPPLY_PROP_STATUS:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = max8997_read_reg(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> if ((reg & (1 << 0)) == 0x1)
> @@ -62,7 +62,8 @@ static int max8997_battery_get_property(struct power_supply *psy,
> break;
> case POWER_SUPPLY_PROP_PRESENT:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = max8997_read_reg(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> if ((reg & (1 << 2)) == 0x0)
> @@ -71,7 +72,8 @@ static int max8997_battery_get_property(struct power_supply *psy,
> break;
> case POWER_SUPPLY_PROP_ONLINE:
> val->intval = 0;
> - ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
> + ret = max8997_read_reg(charger->iodev->regmap,
> + MAX8997_REG_STATUS4, ®);
> if (ret)
> return ret;
> /* DCINOK */
> @@ -103,7 +105,7 @@ static int max8997_battery_probe(struct platform_device *pdev)
> if (val > 0xf)
> val = 0xf;
>
> - ret = max8997_update_reg(iodev->i2c,
> + ret = max8997_update_reg(iodev->regmap,
> MAX8997_REG_MBCCTRL5, val, 0xf);
> if (ret < 0) {
> dev_err(&pdev->dev, "Cannot use i2c bus.\n");
> @@ -113,20 +115,20 @@ static int max8997_battery_probe(struct platform_device *pdev)
>
> switch (pdata->timeout) {
> case 5:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x2 << 4, 0x7 << 4);
> + ret = max8997_update_reg(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x2 << 4, 0x7 << 4);
> break;
> case 6:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x3 << 4, 0x7 << 4);
> + ret = max8997_update_reg(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x3 << 4, 0x7 << 4);
> break;
> case 7:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x4 << 4, 0x7 << 4);
> + ret = max8997_update_reg(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x4 << 4, 0x7 << 4);
> break;
> case 0:
> - ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
> - 0x7 << 4, 0x7 << 4);
> + ret = max8997_update_reg(iodev->regmap,
> + MAX8997_REG_MBCCTRL1, 0x7 << 4, 0x7 << 4);
> break;
> default:
> dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
> diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
> index 2d618fc..470435e 100644
> --- a/drivers/regulator/max8997.c
> +++ b/drivers/regulator/max8997.c
> @@ -258,7 +258,6 @@ static int max8997_get_enable_register(struct regulator_dev *rdev,
> static int max8997_reg_is_enabled(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
> u8 val;
>
> @@ -266,7 +265,7 @@ static int max8997_reg_is_enabled(struct regulator_dev *rdev)
> if (ret)
> return ret;
>
> - ret = max8997_read_reg(i2c, reg, &val);
> + ret = max8997_read_reg(max8997->iodev->regmap, reg, &val);
> if (ret)
> return ret;
>
> @@ -276,27 +275,25 @@ static int max8997_reg_is_enabled(struct regulator_dev *rdev)
> static int max8997_reg_enable(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
>
> ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, pattern, mask);
> + return max8997_update_reg(max8997->iodev->regmap, reg, pattern, mask);
> }
>
> static int max8997_reg_disable(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int ret, reg, mask, pattern;
>
> ret = max8997_get_enable_register(rdev, ®, &mask, &pattern);
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, ~pattern, mask);
> + return max8997_update_reg(max8997->iodev->regmap, reg, ~pattern, mask);
> }
>
> static int max8997_get_voltage_register(struct regulator_dev *rdev,
> @@ -368,7 +365,6 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
> static int max8997_get_voltage_sel(struct regulator_dev *rdev)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int reg, shift, mask, ret;
> u8 val;
>
> @@ -376,7 +372,7 @@ static int max8997_get_voltage_sel(struct regulator_dev *rdev)
> if (ret)
> return ret;
>
> - ret = max8997_read_reg(i2c, reg, &val);
> + ret = max8997_read_reg(max8997->iodev->regmap, reg, &val);
> if (ret)
> return ret;
>
> @@ -413,7 +409,6 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
> int min_uV, int max_uV, unsigned *selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int rid = rdev_get_id(rdev);
> int lb, ub;
> int reg, shift = 0, mask, ret = 0;
> @@ -455,7 +450,8 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
>
> *selector = val;
>
> - ret = max8997_update_reg(i2c, reg, val << shift, mask);
> + ret = max8997_update_reg(max8997->iodev->regmap,
> + reg, val << shift, mask);
>
> return ret;
> }
> @@ -468,7 +464,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
> int min_uV, int max_uV, unsigned *selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> const struct voltage_map_desc *desc;
> int rid = rdev_get_id(rdev);
> int i, reg, shift, mask, ret;
> @@ -500,7 +495,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
> if (ret)
> return ret;
>
> - ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
> + ret = max8997_update_reg(max8997->iodev->regmap,
> + reg, i << shift, mask << shift);
It doesn't look consistent with previous changes - the mask is shifted
here but in previous calls it isn't. Which one is proper?
> *selector = i;
>
> return ret;
> @@ -710,7 +706,6 @@ static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
> unsigned selector)
> {
> struct max8997_data *max8997 = rdev_get_drvdata(rdev);
> - struct i2c_client *i2c = max8997->iodev->i2c;
> int rid = rdev_get_id(rdev);
> int reg, shift = 0, mask, ret;
>
> @@ -721,13 +716,13 @@ static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
> if (ret)
> return ret;
>
> - return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
> + return max8997_update_reg(max8997->iodev->regmap,
> + reg, selector << shift, mask << shift);
Same as before - not consistent mask shifting.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists