| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1394090691-7850-1-git-send-email-chase.southwood@yahoo.com>
Date: Thu, 6 Mar 2014 01:24:51 -0600
From: Chase Southwood <chase.southwood@...oo.com>
To: gregkh@...uxfoundation.org
Cc: abbotti@....co.uk, hsweeten@...ionengravers.com,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Chase Southwood <chase.southwood@...oo.com>
Subject: [PATCH 1/5] Staging: comedi: addi-data: tidy up digital input register map defines in hwdrv_apci1564.c
This patch for hwdrv_apci1564.c fixes the register map defines for the
digital input registers such that they are all the real offsets to each
register, rather than a mix of real offsets and adders to those offsets.
Additionally, the defines have been renamed to assist with shortening
some lines in excess of 80 characters.
Further, some of the old defines were being used incorrectly in the
i_APCI1564_Reset() function. Upon swapping the old defines out for the
new ones in this function, their use has been corrected.
Signed-off-by: Chase Southwood <chase.southwood@...oo.com>
---
Greg, as promised, this is the most up-to-date patchset for hwdrv_apci1564.c.
Please disregard any outstanding unapplied patches from me for this file as this
5 patch set supersedes all previous patchsets I have submitted for this file.
Hartley, I have followed the advice you gave and broke up this patchset
accordingly. It'd be great if I could get a review! This serves as the
beginning of a much more substantial cleanup of this driver.
Thanks,
Chase
.../comedi/drivers/addi-data/hwdrv_apci1564.c | 78 +++++++++-------------
1 file changed, 31 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 2b47fa1..d178a3b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -47,11 +47,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
#define APCI1564_ADDRESS_RANGE 128
/* DIGITAL INPUT-OUTPUT DEFINE */
-/* Input defines */
-#define APCI1564_DIGITAL_IP 0x04
-#define APCI1564_DIGITAL_IP_INTERRUPT_MODE1 4
-#define APCI1564_DIGITAL_IP_INTERRUPT_MODE2 8
-#define APCI1564_DIGITAL_IP_IRQ 16
/* Output defines */
#define APCI1564_DIGITAL_OP 0x18
@@ -63,9 +58,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
#define ADDIDATA_OR 0
#define ADDIDATA_AND 1
-/* Digital Input Interrupt Status */
-#define APCI1564_DIGITAL_IP_INTERRUPT_STATUS 12
-
/* Digital Output Interrupt Status */
#define APCI1564_DIGITAL_OP_INTERRUPT_STATUS 8
@@ -99,6 +91,15 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
#define APCI1564_TCW_WARN_TIMEVAL 24
#define APCI1564_TCW_WARN_TIMEBASE 28
+/*
+ * devpriv->i_IobaseAmcc Register Map
+ */
+#define APCI1564_DI_REG 0x04
+#define APCI1564_DI_INT_MODE1_REG 0x08
+#define APCI1564_DI_INT_MODE2_REG 0x0c
+#define APCI1564_DI_INT_STATUS_REG 0x10
+#define APCI1564_DI_IRQ_REG 0x14
+
/* Global variables */
static unsigned int ui_InterruptStatus_1564;
static unsigned int ui_InterruptData, ui_Type;
@@ -143,31 +144,17 @@ static int i_APCI1564_ConfigDigitalInput(struct comedi_device *dev,
if (data[0] == ADDIDATA_ENABLE) {
data[2] = data[2] << 4;
data[3] = data[3] << 4;
- outl(data[2],
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_INTERRUPT_MODE1);
- outl(data[3],
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_INTERRUPT_MODE2);
+ outl(data[2], devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE1_REG);
+ outl(data[3], devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
if (data[1] == ADDIDATA_OR) {
- outl(0x4,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
+ outl(0x4, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
} else {
- outl(0x6,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
+ outl(0x6, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
}
} else {
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_INTERRUPT_MODE1);
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_INTERRUPT_MODE2);
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE1_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
}
return insn->n;
@@ -180,7 +167,7 @@ static int apci1564_di_insn_bits(struct comedi_device *dev,
{
struct addi_private *devpriv = dev->private;
- data[1] = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
+ data[1] = inl(devpriv->i_IobaseAmcc + APCI1564_DI_REG);
return insn->n;
}
@@ -329,9 +316,7 @@ static int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device *dev,
devpriv->b_TimerSelectMode = ADDIDATA_TIMER;
if (data[1] == 1) {
outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); /* Enable TIMER int & DISABLE ALL THE OTHER int SOURCES */
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
outl(0x0,
devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
APCI1564_DIGITAL_OP_IRQ);
@@ -648,8 +633,7 @@ static void v_APCI1564_Interrupt(int irq, void *d)
unsigned int ui_C1, ui_C2, ui_C3, ui_C4;
unsigned int ul_Command2 = 0;
- ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ) & 0x01;
+ ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG) & 0x01;
ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP +
APCI1564_DIGITAL_OP_IRQ) & 0x01;
ui_Timer =
@@ -669,17 +653,14 @@ static void v_APCI1564_Interrupt(int irq, void *d)
}
if (ui_DI == 1) {
- ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
- outl(0x0,
- devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_IRQ);
+ ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
ui_InterruptStatus_1564 =
- inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
- APCI1564_DIGITAL_IP_INTERRUPT_STATUS);
+ inl(devpriv->i_IobaseAmcc + APCI1564_DI_INT_STATUS_REG);
ui_InterruptStatus_1564 = ui_InterruptStatus_1564 & 0X000FFFF0;
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
- outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + APCI1564_DIGITAL_IP_IRQ); /* enable the interrupt */
+ /* enable the interrupt */
+ outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
return;
}
@@ -829,10 +810,13 @@ static int i_APCI1564_Reset(struct comedi_device *dev)
{
struct addi_private *devpriv = dev->private;
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ); /* disable the interrupts */
- inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS); /* Reset the interrupt status register */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1); /* Disable the and/or interrupt */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE2);
+ /* disable the interrupts */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
+ /* Reset the interrupt status register */
+ inl(devpriv->i_IobaseAmcc + APCI1564_DI_INT_STATUS_REG);
+ /* Disable the and/or interrupt */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE1_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
devpriv->b_DigitalOutputRegister = 0;
ui_Type = 0;
outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP); /* Resets the output channels */
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists