| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1394115785-28301-2-git-send-email-rogerq@ti.com>
Date: Thu, 6 Mar 2014 16:22:53 +0200
From: Roger Quadros <rogerq@...com>
To: <kishon@...comg>, <tony@...mide.com>, <balbi@...com>
CC: <george.cherian@...com>, <balajitk@...com>, <hdegoede@...hat.com>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-ide@...r.kernel.org>,
<rogerq@...com>, Kishon Vijay Abraham I <kishon@...com>
Subject: [PATCH v2 01/13] phy: rename struct omap_control_usb to struct omap_control_phy
From: Kishon Vijay Abraham I <kishon@...com>
Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Signed-off-by: Roger Quadros <rogerq@...com>
---
drivers/phy/Kconfig | 14 +-
drivers/phy/Makefile | 1 +
drivers/phy/phy-omap-control.c | 320 +++++++++++++++++++++++++++++++++++
drivers/phy/phy-omap-usb2.c | 8 +-
drivers/phy/phy-ti-pipe3.c | 8 +-
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/phy/Kconfig | 10 --
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-omap-control.c | 319 ----------------------------------
include/linux/phy/omap_control_phy.h | 89 ++++++++++
include/linux/usb/omap_control_usb.h | 89 ----------
11 files changed, 431 insertions(+), 430 deletions(-)
create mode 100644 drivers/phy/phy-omap-control.c
delete mode 100644 drivers/usb/phy/phy-omap-control.c
create mode 100644 include/linux/phy/omap_control_phy.h
delete mode 100644 include/linux/usb/omap_control_usb.h
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 1b607d7..fe8c009 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -31,12 +31,22 @@ config PHY_MVEBU_SATA
depends on OF
select GENERIC_PHY
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS
depends on USB_PHY
select GENERIC_PHY
- select OMAP_CONTROL_USB
+ select OMAP_CONTROL_PHY
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -47,7 +57,7 @@ config TI_PIPE3
tristate "TI PIPE3 PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
- select OMAP_CONTROL_USB
+ select OMAP_CONTROL_PHY
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ecf0d3f..8da05a8 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
new file mode 100644
index 0000000..17fc200
--- /dev/null
+++ b/drivers/phy/phy-omap-control.c
@@ -0,0 +1,320 @@
+/*
+ * omap-control-phy.c - The PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@...com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/phy/omap_control_phy.h>
+
+/**
+ * omap_control_phy_power - power on/off the phy using control module reg
+ * @dev: the control module device
+ * @on: 0 or 1, based on powering on or off the PHY
+ */
+void omap_control_phy_power(struct device *dev, int on)
+{
+ u32 val;
+ unsigned long rate;
+ struct omap_control_phy *control_phy;
+
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
+ return;
+ }
+
+ control_phy = dev_get_drvdata(dev);
+ if (!control_phy) {
+ dev_err(dev, "%s: invalid control phy device\n", __func__);
+ return;
+ }
+
+ if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
+ return;
+
+ val = readl(control_phy->power);
+
+ switch (control_phy->type) {
+ case OMAP_CTRL_TYPE_USB2:
+ if (on)
+ val &= ~OMAP_CTRL_DEV_PHY_PD;
+ else
+ val |= OMAP_CTRL_DEV_PHY_PD;
+ break;
+
+ case OMAP_CTRL_TYPE_PIPE3:
+ rate = clk_get_rate(control_phy->sys_clk);
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ }
+ break;
+
+ case OMAP_CTRL_TYPE_DRA7USB2:
+ if (on)
+ val &= ~OMAP_CTRL_USB2_PHY_PD;
+ else
+ val |= OMAP_CTRL_USB2_PHY_PD;
+ break;
+
+ case OMAP_CTRL_TYPE_AM437USB2:
+ if (on) {
+ val &= ~(AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ val |= (AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ } else {
+ val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ val |= (AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ }
+ break;
+ default:
+ dev_err(dev, "%s: type %d not recognized\n",
+ __func__, control_phy->type);
+ break;
+ }
+
+ writel(val, control_phy->power);
+}
+EXPORT_SYMBOL_GPL(omap_control_phy_power);
+
+/**
+ * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that a usb
+ * device has been connected.
+ */
+static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
+ val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that it has been
+ * connected to a usb host.
+ */
+static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~OMAP_CTRL_DEV_SESSEND;
+ val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
+ OMAP_CTRL_DEV_VBUSVALID;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core it's now in
+ * disconnected state.
+ */
+static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
+ val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
+ * or device mode or to denote disconnected state
+ * @dev: the control module device
+ * @mode: The mode to which usb should be configured
+ *
+ * This is an API to write to the mailbox register to notify the usb core that
+ * a usb device has been connected.
+ */
+void omap_control_usb_set_mode(struct device *dev,
+ enum omap_control_usb_mode mode)
+{
+ struct omap_control_phy *ctrl_phy;
+
+ if (IS_ERR(dev) || !dev)
+ return;
+
+ ctrl_phy = dev_get_drvdata(dev);
+
+ if (!ctrl_phy) {
+ dev_err(dev, "Invalid control phy device\n");
+ return;
+ }
+
+ if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
+ return;
+
+ switch (mode) {
+ case USB_MODE_HOST:
+ omap_control_usb_host_mode(ctrl_phy);
+ break;
+ case USB_MODE_DEVICE:
+ omap_control_usb_device_mode(ctrl_phy);
+ break;
+ case USB_MODE_DISCONNECT:
+ omap_control_usb_set_sessionend(ctrl_phy);
+ break;
+ default:
+ dev_vdbg(dev, "invalid omap control usb mode\n");
+ }
+}
+EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
+
+#ifdef CONFIG_OF
+
+static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
+
+static const struct of_device_id omap_control_phy_id_table[] = {
+ {
+ .compatible = "ti,control-phy-otghs",
+ .data = &otghs_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2",
+ .data = &usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-pipe3",
+ .data = &pipe3_data,
+ },
+ {
+ .compatible = "ti,control-phy-dra7usb2",
+ .data = &dra7usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-am437usb2",
+ .data = &am437usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
+#endif
+
+
+static int omap_control_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct of_device_id *of_id;
+ struct omap_control_phy *control_phy;
+
+ of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
+ GFP_KERNEL);
+ if (!control_phy) {
+ dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
+ return -ENOMEM;
+ }
+
+ control_phy->dev = &pdev->dev;
+ control_phy->type = *(enum omap_control_phy_type *)of_id->data;
+
+ if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "otghs_control");
+ control_phy->otghs_control = devm_ioremap_resource(
+ &pdev->dev, res);
+ if (IS_ERR(control_phy->otghs_control))
+ return PTR_ERR(control_phy->otghs_control);
+ } else {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "power");
+ control_phy->power = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_phy->power)) {
+ dev_err(&pdev->dev, "Couldn't get power register\n");
+ return PTR_ERR(control_phy->power);
+ }
+ }
+
+ if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
+ control_phy->sys_clk = devm_clk_get(control_phy->dev,
+ "sys_clkin");
+ if (IS_ERR(control_phy->sys_clk)) {
+ pr_err("%s: unable to get sys_clkin\n", __func__);
+ return -EINVAL;
+ }
+ }
+
+ dev_set_drvdata(control_phy->dev, control_phy);
+
+ return 0;
+}
+
+static struct platform_driver omap_control_phy_driver = {
+ .probe = omap_control_phy_probe,
+ .driver = {
+ .name = "omap-control-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_control_phy_id_table),
+ },
+};
+
+static int __init omap_control_phy_init(void)
+{
+ return platform_driver_register(&omap_control_phy_driver);
+}
+subsys_initcall(omap_control_phy_init);
+
+static void __exit omap_control_phy_exit(void)
+{
+ platform_driver_unregister(&omap_control_phy_driver);
+}
+module_exit(omap_control_phy_exit);
+
+MODULE_ALIAS("platform: omap_control_phy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 3cc4aba..a2205a8 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -27,7 +27,7 @@
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
#include <linux/phy/phy.h>
#include <linux/of_platform.h>
@@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
- omap_control_usb_phy_power(phy->control_dev, 0);
+ omap_control_phy_power(phy->control_dev, 0);
return 0;
}
@@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
- omap_control_usb_phy_power(phy->control_dev, 1);
+ omap_control_phy_power(phy->control_dev, 1);
return 0;
}
@@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
phy->control_dev = &control_pdev->dev;
- omap_control_usb_phy_power(phy->control_dev, 0);
+ omap_control_phy_power(phy->control_dev, 0);
otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral;
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index c8d1674..fd029b1 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -26,7 +26,7 @@
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
#define PLL_STATUS 0x00000004
@@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x)
return -EBUSY;
}
- omap_control_usb_phy_power(phy->control_dev, 0);
+ omap_control_phy_power(phy->control_dev, 0);
return 0;
}
@@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x)
if (ret)
return ret;
- omap_control_usb_phy_power(phy->control_dev, 1);
+ omap_control_phy_power(phy->control_dev, 1);
return 0;
}
@@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->control_dev = &control_pdev->dev;
- omap_control_usb_phy_power(phy->control_dev, 0);
+ omap_control_phy_power(phy->control_dev, 0);
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8aa59a2..d341c14 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,7 +37,7 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/usb/musb-omap.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
#include "musb_core.h"
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c337ba2..416e0c8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -75,16 +75,6 @@ config NOP_USB_XCEIV
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
-config OMAP_CONTROL_USB
- tristate "OMAP CONTROL USB Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- help
- Enable this to add support for the USB part present in the control
- module. This driver has API to power on the USB2 PHY and to write to
- the mailbox. The mailbox is present only in omap4 and the register to
- power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
- additional register to power on USB3 PHY.
-
config AM335X_CONTROL_USB
tristate
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 15f1878..f8fa719 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
-obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
deleted file mode 100644
index e725318..0000000
--- a/drivers/usb/phy/phy-omap-control.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * omap-control-usb.c - The USB part of control module.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@...com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/usb/omap_control_usb.h>
-
-/**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
- * @dev: the control module device
- * @on: 0 or 1, based on powering on or off the PHY
- */
-void omap_control_usb_phy_power(struct device *dev, int on)
-{
- u32 val;
- unsigned long rate;
- struct omap_control_usb *control_usb;
-
- if (IS_ERR(dev) || !dev) {
- pr_err("%s: invalid device\n", __func__);
- return;
- }
-
- control_usb = dev_get_drvdata(dev);
- if (!control_usb) {
- dev_err(dev, "%s: invalid control usb device\n", __func__);
- return;
- }
-
- if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
- return;
-
- val = readl(control_usb->power);
-
- switch (control_usb->type) {
- case OMAP_CTRL_TYPE_USB2:
- if (on)
- val &= ~OMAP_CTRL_DEV_PHY_PD;
- else
- val |= OMAP_CTRL_DEV_PHY_PD;
- break;
-
- case OMAP_CTRL_TYPE_PIPE3:
- rate = clk_get_rate(control_usb->sys_clk);
- rate = rate/1000000;
-
- if (on) {
- val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
- OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
- val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
- } else {
- val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
- }
- break;
-
- case OMAP_CTRL_TYPE_DRA7USB2:
- if (on)
- val &= ~OMAP_CTRL_USB2_PHY_PD;
- else
- val |= OMAP_CTRL_USB2_PHY_PD;
- break;
-
- case OMAP_CTRL_TYPE_AM437USB2:
- if (on) {
- val &= ~(AM437X_CTRL_USB2_PHY_PD |
- AM437X_CTRL_USB2_OTG_PD);
- val |= (AM437X_CTRL_USB2_OTGVDET_EN |
- AM437X_CTRL_USB2_OTGSESSEND_EN);
- } else {
- val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
- AM437X_CTRL_USB2_OTGSESSEND_EN);
- val |= (AM437X_CTRL_USB2_PHY_PD |
- AM437X_CTRL_USB2_OTG_PD);
- }
- break;
- default:
- dev_err(dev, "%s: type %d not recognized\n",
- __func__, control_usb->type);
- break;
- }
-
- writel(val, control_usb->power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
-
-/**
- * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that a usb
- * device has been connected.
- */
-static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb)
-{
- u32 val;
-
- val = readl(ctrl_usb->otghs_control);
- val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
- val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
- writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that it has been
- * connected to a usb host.
- */
-static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb)
-{
- u32 val;
-
- val = readl(ctrl_usb->otghs_control);
- val &= ~OMAP_CTRL_DEV_SESSEND;
- val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
- OMAP_CTRL_DEV_VBUSVALID;
- writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core it's now in
- * disconnected state.
- */
-static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
-{
- u32 val;
-
- val = readl(ctrl_usb->otghs_control);
- val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
- val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
- writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
- * or device mode or to denote disconnected state
- * @dev: the control module device
- * @mode: The mode to which usb should be configured
- *
- * This is an API to write to the mailbox register to notify the usb core that
- * a usb device has been connected.
- */
-void omap_control_usb_set_mode(struct device *dev,
- enum omap_control_usb_mode mode)
-{
- struct omap_control_usb *ctrl_usb;
-
- if (IS_ERR(dev) || !dev)
- return;
-
- ctrl_usb = dev_get_drvdata(dev);
-
- if (!ctrl_usb) {
- dev_err(dev, "Invalid control usb device\n");
- return;
- }
-
- if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
- return;
-
- switch (mode) {
- case USB_MODE_HOST:
- omap_control_usb_host_mode(ctrl_usb);
- break;
- case USB_MODE_DEVICE:
- omap_control_usb_device_mode(ctrl_usb);
- break;
- case USB_MODE_DISCONNECT:
- omap_control_usb_set_sessionend(ctrl_usb);
- break;
- default:
- dev_vdbg(dev, "invalid omap control usb mode\n");
- }
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
-
-#ifdef CONFIG_OF
-
-static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
-static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
-static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
-static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
-static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
-
-static const struct of_device_id omap_control_usb_id_table[] = {
- {
- .compatible = "ti,control-phy-otghs",
- .data = &otghs_data,
- },
- {
- .compatible = "ti,control-phy-usb2",
- .data = &usb2_data,
- },
- {
- .compatible = "ti,control-phy-pipe3",
- .data = &pipe3_data,
- },
- {
- .compatible = "ti,control-phy-dra7usb2",
- .data = &dra7usb2_data,
- },
- {
- .compatible = "ti,control-phy-am437usb2",
- .data = &am437usb2_data,
- },
- {},
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
-
-static int omap_control_usb_probe(struct platform_device *pdev)
-{
- struct resource *res;
- const struct of_device_id *of_id;
- struct omap_control_usb *control_usb;
-
- of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
- &pdev->dev);
- if (!of_id)
- return -EINVAL;
-
- control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
- GFP_KERNEL);
- if (!control_usb) {
- dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
- return -ENOMEM;
- }
-
- control_usb->dev = &pdev->dev;
- control_usb->type = *(enum omap_control_usb_type *)of_id->data;
-
- if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "otghs_control");
- control_usb->otghs_control = devm_ioremap_resource(
- &pdev->dev, res);
- if (IS_ERR(control_usb->otghs_control))
- return PTR_ERR(control_usb->otghs_control);
- } else {
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "power");
- control_usb->power = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(control_usb->power)) {
- dev_err(&pdev->dev, "Couldn't get power register\n");
- return PTR_ERR(control_usb->power);
- }
- }
-
- if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
- control_usb->sys_clk = devm_clk_get(control_usb->dev,
- "sys_clkin");
- if (IS_ERR(control_usb->sys_clk)) {
- pr_err("%s: unable to get sys_clkin\n", __func__);
- return -EINVAL;
- }
- }
-
- dev_set_drvdata(control_usb->dev, control_usb);
-
- return 0;
-}
-
-static struct platform_driver omap_control_usb_driver = {
- .probe = omap_control_usb_probe,
- .driver = {
- .name = "omap-control-usb",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(omap_control_usb_id_table),
- },
-};
-
-static int __init omap_control_usb_init(void)
-{
- return platform_driver_register(&omap_control_usb_driver);
-}
-subsys_initcall(omap_control_usb_init);
-
-static void __exit omap_control_usb_exit(void)
-{
- platform_driver_unregister(&omap_control_usb_driver);
-}
-module_exit(omap_control_usb_exit);
-
-MODULE_ALIAS("platform: omap_control_usb");
-MODULE_AUTHOR("Texas Instruments Inc.");
-MODULE_DESCRIPTION("OMAP Control Module USB Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h
new file mode 100644
index 0000000..5450403
--- /dev/null
+++ b/include/linux/phy/omap_control_phy.h
@@ -0,0 +1,89 @@
+/*
+ * omap_control_phy.h - Header file for the PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@...com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __OMAP_CONTROL_PHY_H__
+#define __OMAP_CONTROL_PHY_H__
+
+enum omap_control_phy_type {
+ OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
+ OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
+ OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+ OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+ OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
+struct omap_control_phy {
+ struct device *dev;
+
+ u32 __iomem *otghs_control;
+ u32 __iomem *power;
+ u32 __iomem *power_aux;
+
+ struct clk *sys_clk;
+
+ enum omap_control_phy_type type;
+};
+
+enum omap_control_usb_mode {
+ USB_MODE_UNDEFINED = 0,
+ USB_MODE_HOST,
+ USB_MODE_DEVICE,
+ USB_MODE_DISCONNECT,
+};
+
+#define OMAP_CTRL_DEV_PHY_PD BIT(0)
+
+#define OMAP_CTRL_DEV_AVALID BIT(0)
+#define OMAP_CTRL_DEV_BVALID BIT(1)
+#define OMAP_CTRL_DEV_VBUSVALID BIT(2)
+#define OMAP_CTRL_DEV_SESSEND BIT(3)
+#define OMAP_CTRL_DEV_IDDIG BIT(4)
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
+
+#define OMAP_CTRL_USB2_PHY_PD BIT(28)
+
+#define AM437X_CTRL_USB2_PHY_PD BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
+
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
+void omap_control_phy_power(struct device *dev, int on);
+void omap_control_usb_set_mode(struct device *dev,
+ enum omap_control_usb_mode mode);
+#else
+
+static inline void omap_control_phy_power(struct device *dev, int on)
+{
+}
+
+static inline void omap_control_usb_set_mode(struct device *dev,
+ enum omap_control_usb_mode mode)
+{
+}
+#endif
+
+#endif /* __OMAP_CONTROL_PHY_H__ */
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
deleted file mode 100644
index 69ae383..0000000
--- a/include/linux/usb/omap_control_usb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * omap_control_usb.h - Header file for the USB part of control module.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@...com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __OMAP_CONTROL_USB_H__
-#define __OMAP_CONTROL_USB_H__
-
-enum omap_control_usb_type {
- OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
- OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
- OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
- OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
- OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
-};
-
-struct omap_control_usb {
- struct device *dev;
-
- u32 __iomem *otghs_control;
- u32 __iomem *power;
- u32 __iomem *power_aux;
-
- struct clk *sys_clk;
-
- enum omap_control_usb_type type;
-};
-
-enum omap_control_usb_mode {
- USB_MODE_UNDEFINED = 0,
- USB_MODE_HOST,
- USB_MODE_DEVICE,
- USB_MODE_DISCONNECT,
-};
-
-#define OMAP_CTRL_DEV_PHY_PD BIT(0)
-
-#define OMAP_CTRL_DEV_AVALID BIT(0)
-#define OMAP_CTRL_DEV_BVALID BIT(1)
-#define OMAP_CTRL_DEV_VBUSVALID BIT(2)
-#define OMAP_CTRL_DEV_SESSEND BIT(3)
-#define OMAP_CTRL_DEV_IDDIG BIT(4)
-
-#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000
-#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE
-
-#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000
-#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16
-
-#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
-#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
-
-#define OMAP_CTRL_USB2_PHY_PD BIT(28)
-
-#define AM437X_CTRL_USB2_PHY_PD BIT(0)
-#define AM437X_CTRL_USB2_OTG_PD BIT(1)
-#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
-#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
-
-#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb_set_mode(struct device *dev,
- enum omap_control_usb_mode mode);
-#else
-
-static inline void omap_control_usb_phy_power(struct device *dev, int on)
-{
-}
-
-static inline void omap_control_usb_set_mode(struct device *dev,
- enum omap_control_usb_mode mode)
-{
-}
-#endif
-
-#endif /* __OMAP_CONTROL_USB_H__ */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists