lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 6 Mar 2014 21:10:27 +0530 From: Kishon Vijay Abraham I <kishon@...com> To: Roger Quadros <rogerq@...com>, <tony@...mide.com>, <balbi@...com> CC: <george.cherian@...com>, <balajitk@...com>, <hdegoede@...hat.com>, <linux-omap@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>, <linux-usb@...r.kernel.org>, <linux-ide@...r.kernel.org> Subject: Re: [PATCH v2 02/13] phy: omap-control: Update DT binding information Felipe, On Thursday 06 March 2014 08:08 PM, Roger Quadros wrote: > Move omap-control binding information to the right location. > > Signed-off-by: Roger Quadros <rogerq@...com> > --- > Documentation/devicetree/bindings/phy/ti-phy.txt | 25 ++++++++++++++++++++++ This patch is dependent on "Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt" which got merged in your tree. So can you take this patch also? Acked-by: Kishon Vijay Abraham I <kishon@...com> Regards Kishon > Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --------------------- > 2 files changed, 25 insertions(+), 24 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt > index f671163..5c5b1b0 100644 > --- a/Documentation/devicetree/bindings/phy/ti-phy.txt > +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt > @@ -1,5 +1,30 @@ > TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs > > +OMAP CONTROL PHY > + > +Required properties: > + - compatible: Should be one of > + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. > + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register > + e.g. USB2_PHY on OMAP5. > + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control > + e.g. USB3 PHY and SATA PHY on OMAP5. > + "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on > + DRA7 platform. > + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on > + AM437 platform. > + - reg : Address and length of the register set for the device. It contains > + the address of "otghs_control" for control-phy-otghs or "power" register > + for other types. > + - reg-names: should be "otghs_control" control-phy-otghs and "power" for > + other types. > + > +omap_control_usb: omap-control-usb@...02300 { > + compatible = "ti,control-phy-otghs"; > + reg = <0x4a00233c 0x4>; > + reg-names = "otghs_control"; > +}; > + > OMAP USB2 PHY > > Required properties: > diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt > index c495135..38b2fae 100644 > --- a/Documentation/devicetree/bindings/usb/omap-usb.txt > +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt > @@ -76,27 +76,3 @@ omap_dwc3 { > ranges; > }; > > -OMAP CONTROL USB > - > -Required properties: > - - compatible: Should be one of > - "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. > - "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register > - e.g. USB2_PHY on OMAP5. > - "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control > - e.g. USB3 PHY and SATA PHY on OMAP5. > - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on > - DRA7 platform. > - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on > - AM437 platform. > - - reg : Address and length of the register set for the device. It contains > - the address of "otghs_control" for control-phy-otghs or "power" register > - for other types. > - - reg-names: should be "otghs_control" control-phy-otghs and "power" for > - other types. > - > -omap_control_usb: omap-control-usb@...02300 { > - compatible = "ti,control-phy-otghs"; > - reg = <0x4a00233c 0x4>; > - reg-names = "otghs_control"; > -}; > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists