| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 7 Mar 2014 18:36:49 +0800
From: Fengguang Wu <fengguang.wu@...el.com>
To: Stefani Seibold <stefani@...bold.net>
Cc: "H. Peter Anvin" <hpa@...ux.intel.com>,
linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [x86, vdso] BUG: unable to handle kernel paging request at
d34bd000
On Fri, Mar 07, 2014 at 10:57:28AM +0100, Stefani Seibold wrote:
> Hi Fengguang,
>
> did you test the config i had sent to you?
Stefani, here is the result with your config. It goes on to another
bug. I repeated it twice and it's reproducible.
This kernel is build with gcc 4.6.3 on commit
4dea8e4824b363c53f320d328040d7c6c5921419 ("x86, vdso: Add 32 bit VDSO
time support for 32 bit kernel").
wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.14.0-rc5-00009-g4dea8e4 (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #6 SMP Fri Mar 7 18:30:39 CST 2014
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [800f1840]
[ 0.000000] mpc: f1850-f193c
[ 0.000000] initial memory mapped: [mem 0x00000000-0x02bfffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0f800000-0x0fbfffff]
[ 0.000000] [mem 0x0f800000-0x0fbfffff] page 4k
[ 0.000000] BRK [0x02790000, 0x02790fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0f7fffff]
[ 0.000000] [mem 0x08000000-0x0f7fffff] page 4k
[ 0.000000] BRK [0x02791000, 0x02791fff] PGTABLE
[ 0.000000] BRK [0x02792000, 0x02792fff] PGTABLE
[ 0.000000] BRK [0x02793000, 0x02793fff] PGTABLE
[ 0.000000] BRK [0x02794000, 0x02794fff] PGTABLE
[ 0.000000] BRK [0x02795000, 0x02795fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x07ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff]
[ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k
[ 0.000000] RAMDISK: [mem 0x0fce6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 000f16b0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0fffe3f0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0fffe430 001137 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0fffff40 000040
[ 0.000000] ACPI: SSDT 0ffff6a0 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0ffff5b0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0ffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fffe000
[ 0.000000] low ram: 0 - 0fffe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:fffb001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0fffdfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] free_area_init_node: node 0, pgdat 8200a2e0, node_mem_map 8f951028
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 600 pages used for memmap
[ 0.000000] Normal zone: 61438 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffff8000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 330 pages/cpu @8f6bd000 s1338976 r0 d12704 u1351680
[ 0.000000] pcpu-alloc: s1338976 r0 d12704 u1351680 alloc=330*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] kvm-clock: cpu 0, msr 0:fffb001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr f6bf540
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796
[ 0.000000] Kernel command line: debug sched_debug apic=debug ignore_loglevel earlyprintk=ttyS0,115200 sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228784K/261744K available (11650K kernel code, 875K rwdata, 4076K rodata, 1920K init, 5512K bss, 32960K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffa93000 - 0xfffff000 (5552 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0x907fe000 - 0xff3fe000 (1772 MB)
[ 0.000000] lowmem : 0x80000000 - 0x8fffe000 ( 255 MB)
[ 0.000000] .init : 0x82039000 - 0x82219000 (1920 kB)
[ 0.000000] .data : 0x81b60dce - 0x82037fe0 (4956 kB)
[ 0.000000] .text : 0x81000000 - 0x81b60dce (11651 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Hierarchical RCU autobalancing is disabled.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=8f00a000 soft=8f00c000
[ 0.000000] ACPI: Core revision 20131218
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3807 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | |failed|
[ 0.000000] recursive read-lock #2: | ok | |failed|
[ 0.000000] mixed read-write-lock: |failed| |failed|
[ 0.000000] mixed write-read-lock: |failed| |failed|
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing:failed| ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context:failed| ok | ok |
[ 0.000000] try:failed| ok |failed|
[ 0.000000] block:failed| ok |failed|
[ 0.000000] spinlock:failed| ok |failed|
[ 0.000000] --------------------------------------------------------
[ 0.000000] 141 out of 253 testcases failed, as expected. |
[ 0.000000] ----------------------------------------------------
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] ODEBUG: selftest passed
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[ 0.013636] pid_max: default: 4096 minimum: 301
[ 0.016073] Mount-cache hash table entries: 512
[ 0.018625] Initializing cgroup subsys debug
[ 0.020022] Initializing cgroup subsys devices
[ 0.024026] Initializing cgroup subsys freezer
[ 0.026092] Initializing cgroup subsys net_cls
[ 0.027192] Initializing cgroup subsys blkio
[ 0.028020] Initializing cgroup subsys perf_event
[ 0.032025] Initializing cgroup subsys net_prio
[ 0.034439] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.034439] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.034439] tlb_flushall_shift: -1
[ 0.040842] debug: unmapping init [mem 0x82219000-0x82221fff]
[ 0.050702] Getting VERSION: 50014
[ 0.052013] Getting VERSION: 50014
[ 0.053849] Getting ID: 0
[ 0.056027] Getting ID: f000000
[ 0.057861] Getting LVT0: 8700
[ 0.059501] Getting LVT1: 8400
[ 0.060020] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.064143] enabled ExtINT on CPU#0
[ 0.068055] ENABLING IO-APIC IRQs
[ 0.072027] init IO_APIC IRQs
[ 0.076015] apic 0 pin 0 not connected
[ 0.077991] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.080058] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.084056] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.088052] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.092051] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.096053] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.100051] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.104052] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.108056] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.112062] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.116051] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.120052] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.124058] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.128050] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.132051] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.136049] apic 0 pin 16 not connected
[ 0.140010] apic 0 pin 17 not connected
[ 0.141251] apic 0 pin 18 not connected
[ 0.144005] apic 0 pin 19 not connected
[ 0.145356] apic 0 pin 20 not connected
[ 0.147376] apic 0 pin 21 not connected
[ 0.148011] apic 0 pin 22 not connected
[ 0.150122] apic 0 pin 23 not connected
[ 0.152192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.156010] smpboot: CPU0: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.161144] Using local APIC timer interrupts.
[ 0.161144] calibrating APIC timer ...
[ 0.168000] ... lapic delta = 6249564
[ 0.168000] ... PM-Timer delta = 357923
[ 0.168000] ... PM-Timer result ok
[ 0.168000] ..... delta 6249564
[ 0.168000] ..... mult: 268416729
[ 0.168000] ..... calibration result: 3999720
[ 0.168000] ..... CPU clock speed is 2693.0593 MHz.
[ 0.168000] ..... host bus clock speed is 999.3720 MHz.
[ 0.168131] Performance Events: no PMU driver, software events only.
[ 0.175541] CPU 1 irqstacks, hard=8f086000 soft=8f090000
[ 0.176012] x86: Booting SMP configuration:
[ 0.180010] .... node #0, CPUs: #1
[ 0.012000] Initializing CPU#1
[ 0.012000] kvm-clock: cpu 1, msr 0:fffb021, secondary cpu clock
[ 0.012000] masked ExtINT on CPU#1
[ 0.194698] x86: Booted up 1 node, 2 CPUs
[ 0.194633] KVM setup async PF for cpu 1
[ 0.194633] kvm-stealtime: cpu 1, msr f809540
[ 0.200028] ----------------
[ 0.201634] | NMI testsuite:
[ 0.204007] --------------------
[ 0.205970] remote IPI: ok |
[ 0.221224] local IPI: ok |
[ 0.244040] --------------------
[ 0.246770] Good, all 2 testcases passed! |
[ 0.248010] ---------------------------------
[ 0.250219] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[ 0.252726] CPU0 attaching sched-domain:
[ 0.256057] domain 0: span 0-1 level CPU
[ 0.258166] groups: 0 1
[ 0.261022] CPU1 attaching sched-domain:
[ 0.263162] domain 0: span 0-1 level CPU
[ 0.265216] groups: 1 0
[ 0.268496] devtmpfs: initialized
[ 0.273590] xor: measuring software checksum speed
[ 0.316031] pIII_sse : 80.000 MB/sec
[ 0.356063] prefetch64-sse: 81.000 MB/sec
[ 0.358520] xor: using function: prefetch64-sse (81.000 MB/sec)
[ 0.360043] atomic64 test passed for i386+ platform with CX8 and with SSE
[ 0.364500] regulator-dummy: no parameters
[ 0.367128] NET: Registered protocol family 16
[ 0.369279] cpuidle: using governor ladder
[ 0.372013] cpuidle: using governor menu
[ 0.376089] ACPI: bus type PCI registered
[ 0.378420] PCI: PCI BIOS revision 2.10 entry at 0xfd4e3, last bus=0
[ 0.380011] PCI: Using configuration type 1 for base access
[ 0.398117] bio: create slab <bio-0> at 0
[ 0.468047] raid6: mmxx1 1965 MB/s
[ 0.536030] raid6: mmxx2 2066 MB/s
[ 0.604038] raid6: sse1x1 1687 MB/s
[ 0.672026] raid6: sse1x2 1995 MB/s
[ 0.740032] raid6: sse2x1 3289 MB/s
[ 0.808027] raid6: sse2x2 4043 MB/s
[ 0.810189] raid6: using algorithm sse2x2 (4043 MB/s)
[ 0.812012] raid6: using intx1 recovery algorithm
[ 0.816007] ACPI: Added _OSI(Module Device)
[ 0.818260] ACPI: Added _OSI(Processor Device)
[ 0.820012] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.822397] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.840253] ACPI: Interpreter enabled
[ 0.842482] ACPI: (supports S0 S5)
[ 0.844010] ACPI: Using IOAPIC for interrupt routing
[ 0.846458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.869792] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.872024] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.874609] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.876407] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.884192] PCI host bridge to bus 0000:00
[ 0.886239] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.888015] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.890864] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.892015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.896021] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.900125] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.905121] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.909252] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.917610] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
[ 0.922746] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.924717] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.928036] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.932753] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.944074] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.952081] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 0.976051] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.977983] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.980010] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f]
[ 0.982040] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 0.987517] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.988360] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.990476] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.992901] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.999129] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 1.000317] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 1.001999] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[ 1.007026] pci_bus 0000:00: on NUMA node 0
[ 1.008667] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 1.010267] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.011811] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.012787] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 1.014350] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 1.016917] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 1.018836] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.018836] vgaarb: loaded
[ 1.018836] vgaarb: bridge control possible 0000:00:02.0
[ 1.020128] SCSI subsystem initialized
[ 1.023305] libata version 3.00 loaded.
[ 1.023305] ACPI: bus type USB registered
[ 1.023305] usbcore: registered new interface driver usbfs
[ 1.024033] usbcore: registered new interface driver hub
[ 1.027774] usbcore: registered new device driver usb
[ 1.027774] pps_core: LinuxPPS API ver. 1 registered
[ 1.027774] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
[ 1.028016] PTP clock support registered
[ 1.028890] PCI: Using ACPI for IRQ routing
[ 1.029759] PCI: pci_cache_line_size set to 64 bytes
[ 1.032137] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.033280] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 1.034824] irda_init()
[ 1.035534] NET: Registered protocol family 23
[ 1.036045] Bluetooth: Core ver 2.18
[ 1.036880] NET: Registered protocol family 31
[ 1.037779] Bluetooth: HCI device and connection manager initialized
[ 1.039007] Bluetooth: HCI socket layer initialized
[ 1.040016] Bluetooth: L2CAP socket layer initialized
[ 1.041048] Bluetooth: SCO socket layer initialized
[ 1.045382] cfg80211: Calling CRDA to update world regulatory domain
[ 1.045880] Switched to clocksource kvm-clock
[ 1.045880] FS-Cache: Loaded
[ 1.045922] CacheFiles: Loaded
[ 1.046692] pnp: PnP ACPI init
[ 1.047411] ACPI: bus type PNP registered
[ 1.048352] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 1.052070] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.053394] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[ 1.055167] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.056469] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[ 1.058199] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.059495] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[ 1.061148] pnp 00:03: [dma 2]
[ 1.061904] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.063274] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[ 1.064966] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.066283] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 1.067967] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.069639] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.071121] pnp: PnP ACPI: found 7 devices
[ 1.071983] ACPI: bus type PNP unregistered
[ 1.111354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.112559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.113656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.114884] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 1.116195] NET: Registered protocol family 2
[ 1.117686] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.119092] TCP bind hash table entries: 2048 (order: 4, 90112 bytes)
[ 1.120476] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.121754] TCP: reno registered
[ 1.122500] UDP hash table entries: 128 (order: 1, 12288 bytes)
[ 1.123682] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
[ 1.125161] NET: Registered protocol family 1
[ 1.126115] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.127294] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.128456] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.129674] pci 0000:00:02.0: Boot video device
[ 1.130662] PCI: CLS 0 bytes, default 64
[ 1.394320] Unpacking initramfs...
[ 2.121341] debug: unmapping init [mem 0x8fce6000-0x8ffeffff]
[ 2.125846] cryptomgr_test (25) used greatest stack depth: 7220 bytes left
[ 2.129704] PCLMULQDQ-NI instructions are not detected.
[ 2.131872] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[ 2.135487] NatSemi SCx200 Driver
[ 2.137615] futex hash table entries: 16 (order: -3, 768 bytes)
[ 2.139370] Initialise system trusted keyring
[ 2.141665] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.150850] VFS: Disk quotas dquot_6.5.2
[ 2.152523] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.155316] DLM installed
[ 2.158305] NTFS driver 2.1.30 [Flags: R/O DEBUG].
[ 2.160836] ocfs2 stack glue: unable to register sysctl
[ 2.162356] ocfs2: Registered cluster interface o2cb
[ 2.164094] OCFS2 User DLM kernel interface loaded
[ 2.169919] msgmni has been set to 446
[ 2.182029] Key type asymmetric registered
[ 2.183519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.186111] io scheduler noop registered (default)
[ 2.187523] io scheduler deadline registered
[ 2.188826] io scheduler cfq registered
[ 2.190023] list_sort_test: start testing list_sort()
[ 2.191782] test_string_helpers: Running tests...
[ 2.194328] no IO addresses supplied
[ 2.195696] usbcore: registered new interface driver udlfb
[ 2.197237] usbcore: registered new interface driver smscufx
[ 2.200202] kworker/u4:0 (85) used greatest stack depth: 6880 bytes left
[ 2.202082] uvesafb: failed to execute /sbin/v86d
[ 2.203435] uvesafb: make sure that the v86d helper is installed and executable
[ 2.205558] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-8)
[ 2.207235] uvesafb: vbe_init() failed with -22
[ 2.208528] uvesafb: probe of uvesafb.0 failed with error -22
[ 2.210566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.212682] ACPI: Power Button [PWRF]
[ 2.214976] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 2.216512] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.251476] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.255246] STMicroelectronics ASC driver initialized
[ 2.256935] serial: Freescale lpuart driver
[ 2.258576] lp: driver loaded but no devices found
[ 2.259893] toshiba: not a supported Toshiba laptop
[ 2.261701] ppdev: user-space parallel port driver
[ 2.263144] scx200_gpio: no SCx200 gpio present
[ 2.264529] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 2.266339] platform pc8736x_gpio.0: no device found
[ 2.267795] nsc_gpio initializing
[ 2.268886] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 2.270325] SyncLink PC Card driver $Revision: 4.34 $, tty major#245
[ 2.272098] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 2.275218] Hangcheck: Using getrawmonotonic().
[ 2.277478] parport_pc 00:04: reported by Plug and Play ACPI
[ 2.279942] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 2.380662] lp0: using parport0 (interrupt-driven).
[ 2.385885] Floppy drive(s): fd0 is 1.44M
[ 2.394564] loop: module loaded
[ 2.396533] rbd: loaded
[ 2.397807] blk-mq: CPU -> queue map
[ 2.399544] CPU 0 -> Queue 0
[ 2.401016] CPU 1 -> Queue 0
[ 2.404207] nullb0: unknown partition table
[ 2.406830] FDC 0 is a S82078B
[ 2.406892] blk-mq: CPU -> queue map
[ 2.406893] CPU 0 -> Queue 0
[ 2.406893] CPU 1 -> Queue 0
[ 2.416684] nullb1: unknown partition table
[ 2.419346] null: module loaded
[ 2.422351] zram: Created 1 device(s) ...
[ 2.424592] dummy-irq: no IRQ given. Use irq=N
[ 2.426915] lkdtm: No crash points registered, enable through debugfs
[ 2.429963] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 2.433768] c2port c2port0: C2 port uc added
[ 2.434689] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[ 2.436654] usbcore: registered new interface driver viperboard
[ 2.437819] Uniform Multi-Platform E-IDE driver
[ 2.438846] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 2.440185] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 2.442135] ide0: BM-DMA at 0xc060-0xc067
[ 2.443081] ide1: BM-DMA at 0xc068-0xc06f
[ 2.443995] Probing IDE interface ide0...
[ 3.014829] Probing IDE interface ide1...
[ 3.754810] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 4.430638] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 4.433191] hdc: MWDMA2 mode selected
[ 4.435029] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.436943] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.439489] ide-gd driver 1.18
[ 4.442813] Loading iSCSI transport class v2.0-870.
[ 4.445442] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 4.448054] osd: LOADED open-osd 0.2.1
[ 4.450716] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 4.457102] SSFDC read-only Flash Translation layer
[ 4.459309] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[ 4.462749] Failed to ioremap_nocache
[ 4.464596] slram: not enough parameters.
[ 4.906125] parport0: AVR Butterfly
[ 4.907163] parport0: cannot grant exclusive access for device spi-lm70llp
[ 4.909417] spi-lm70llp: spi_lm70llp probe fail, status -12
[ 4.911397] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 4.915972] eql: Equalizer2002: Simon Janes (simon@....com) and David S. Miller (davem@...hat.com)
[ 4.920305] tun: Universal TUN/TAP device driver, 1.6
[ 4.921734] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 4.923337] arcnet loaded.
[ 4.924402] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 4.926088] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[ 4.928127] arcnet: raw mode (`r') encapsulation support loaded.
[ 4.929633] arcnet: cap mode (`c') encapsulation support loaded.
[ 4.932002] arcnet: COM90xx chipset support
[ 5.232765] S3: No ARCnet cards found.
[ 5.234689] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@...oon.tc.umn.edu>
[ 5.240676] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@...ba.org>
[ 5.246552] slcan: serial line CAN interface driver
[ 5.249749] slcan: 10 dynamic interface channels.
[ 5.252643] CAN device driver interface
[ 5.255390] usbcore: registered new interface driver ems_usb
[ 5.259066] usbcore: registered new interface driver esd_usb2
[ 5.262792] usbcore: registered new interface driver kvaser_usb
[ 5.265219] usbcore: registered new interface driver peak_usb
[ 5.267167] usbcore: registered new interface driver usb_8dev
[ 5.269293] sja1000 CAN netdevice driver
[ 5.270972] sja1000_isa: insufficient parameters supplied
[ 5.273252] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@...ha.franken.de
[ 5.276288] usbcore: registered new interface driver irda-usb
[ 5.277511] usbcore: registered new interface driver stir4200
[ 5.280800] usbcore: registered new interface driver mcs7780
[ 5.283335] usbcore: registered new interface driver kingsun-sir
[ 5.285676] usbcore: registered new interface driver ks959-sir
[ 5.288501] NET3 PLIP version 2.4-parport gniibe@....co.jp
[ 5.290542] plip0: Parallel port at 0x378, using IRQ 7.
[ 5.291593] PPP generic driver version 2.4.2
[ 5.296975] PPP BSD Compression module registered
[ 5.300164] PPP Deflate Compression module registered
[ 5.303224] PPP MPPE Compression module registered
[ 5.306205] NET: Registered protocol family 24
[ 5.308995] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[ 5.313166] usbcore: registered new interface driver kaweth
[ 5.316540] usbcore: registered new interface driver r8152
[ 5.320037] usbcore: registered new interface driver cdc_phonet
[ 5.323755] parport0: cannot grant exclusive access for device ks0108
[ 5.327584] ks0108: ERROR: parport didn't register new device
[ 5.331152] cfag12864b: ERROR: ks0108 is not initialized
[ 5.334459] cfag12864bfb: ERROR: cfag12864b is not initialized
[ 5.339533] aoe: AoE v85 initialised.
[ 5.342520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.346214] ehci-pci: EHCI PCI platform driver
[ 5.347716] ehci-platform: EHCI generic platform driver
[ 5.349075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.350900] ohci-pci: OHCI PCI platform driver
[ 5.353029] ohci-platform: OHCI generic platform driver
[ 5.355099] driver u132_hcd
[ 5.357145] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[ 5.359564] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.363410] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[ 5.365693] 4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.369581] usbcore: registered new interface driver cdc_acm
[ 5.371952] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.375634] usbcore: registered new interface driver usblp
[ 5.377852] usbcore: registered new interface driver cdc_wdm
[ 5.380088] usbcore: registered new interface driver usbtmc
[ 5.382352] usbcore: registered new interface driver usb-storage
[ 5.384782] usbcore: registered new interface driver ums-alauda
[ 5.387245] usbcore: registered new interface driver ums-cypress
[ 5.389692] usbcore: registered new interface driver ums_eneub6250
[ 5.392264] usbcore: registered new interface driver ums-jumpshot
[ 5.394635] usbcore: registered new interface driver ums-sddr09
[ 5.397059] usbcore: registered new interface driver ums-usbat
[ 5.399614] usbcore: registered new interface driver mdc800
[ 5.401878] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 5.405158] usbcore: registered new interface driver microtekX6
[ 5.407749] usbcore: registered new interface driver usbserial
[ 5.410134] usbcore: registered new interface driver usbserial_generic
[ 5.412897] usbserial: USB Serial support registered for generic
[ 5.415366] usbcore: registered new interface driver aircable
[ 5.417740] usbserial: USB Serial support registered for aircable
[ 5.420268] usbcore: registered new interface driver ark3116
[ 5.422530] usbserial: USB Serial support registered for ark3116
[ 5.424829] usbcore: registered new interface driver belkin_sa
[ 5.426614] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 5.428789] usbcore: registered new interface driver ch341
[ 5.430064] usbserial: USB Serial support registered for ch341-uart
[ 5.431426] usbcore: registered new interface driver cp210x
[ 5.433194] usbserial: USB Serial support registered for cp210x
[ 5.435513] usbcore: registered new interface driver cyberjack
[ 5.437994] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 5.440011] usbcore: registered new interface driver cypress_m8
[ 5.441325] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 5.443087] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 5.444804] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 5.446973] usbcore: registered new interface driver usb_debug
[ 5.449135] usbserial: USB Serial support registered for debug
[ 5.451307] usbcore: registered new interface driver digi_acceleport
[ 5.453731] usbserial: USB Serial support registered for Digi 2 port USB adapter
[ 5.457042] usbserial: USB Serial support registered for Digi 4 port USB adapter
[ 5.460292] usbcore: registered new interface driver empeg
[ 5.462564] usbserial: USB Serial support registered for empeg
[ 5.464956] usbcore: registered new interface driver ftdi_sio
[ 5.467232] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 5.470562] usbcore: registered new interface driver ipw
[ 5.472728] usbserial: USB Serial support registered for IPWireless converter
[ 5.474856] usbcore: registered new interface driver keyspan
[ 5.476179] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 5.478090] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 5.479899] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 5.481712] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 5.483500] usbcore: registered new interface driver metro_usb
[ 5.484803] usbserial: USB Serial support registered for Metrologic USB to Serial
[ 5.486662] usbcore: registered new interface driver mos7840
[ 5.487949] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 5.489879] usbcore: registered new interface driver mxuport
[ 5.491173] usbserial: USB Serial support registered for MOXA UPort
[ 5.492561] usbcore: registered new interface driver navman
[ 5.493801] usbserial: USB Serial support registered for navman
[ 5.495116] usbcore: registered new interface driver omninet
[ 5.496369] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 5.498570] usbcore: registered new interface driver opticon
[ 5.500779] usbserial: USB Serial support registered for opticon
[ 5.502506] usbcore: registered new interface driver option
[ 5.503912] usbserial: USB Serial support registered for GSM modem (1-port)
[ 5.505452] usbcore: registered new interface driver qcaux
[ 5.507468] usbserial: USB Serial support registered for qcaux
[ 5.509929] usbcore: registered new interface driver qcserial
[ 5.512443] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.514449] usbcore: registered new interface driver usb_serial_simple
[ 5.516240] usbserial: USB Serial support registered for zio
[ 5.517802] usbserial: USB Serial support registered for funsoft
[ 5.519619] usbserial: USB Serial support registered for flashloader
[ 5.521306] usbserial: USB Serial support registered for vivopay
[ 5.523109] usbserial: USB Serial support registered for moto_modem
[ 5.525264] usbserial: USB Serial support registered for hp4x
[ 5.527149] usbserial: USB Serial support registered for suunto
[ 5.529498] usbserial: USB Serial support registered for siemens_mpi
[ 5.532117] usbcore: registered new interface driver spcp8x5
[ 5.534420] usbserial: USB Serial support registered for SPCP8x5
[ 5.536351] usbcore: registered new interface driver ssu100
[ 5.537986] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 5.540925] usbcore: registered new interface driver visor
[ 5.543067] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 5.545340] usbserial: USB Serial support registered for Sony Clie 5.0
[ 5.547699] usbserial: USB Serial support registered for Sony Clie 3.5
[ 5.549788] usbcore: registered new interface driver wishbone_serial
[ 5.551876] usbserial: USB Serial support registered for wishbone_serial
[ 5.554628] usbcore: registered new interface driver whiteheat
[ 5.556995] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 5.560938] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[ 5.564523] usbcore: registered new interface driver xsens_mt
[ 5.567181] usbserial: USB Serial support registered for xsens_mt
[ 5.569405] usbcore: registered new interface driver zte_ev
[ 5.571699] usbserial: USB Serial support registered for zte_ev
[ 5.573991] usbcore: registered new interface driver appledisplay
[ 5.575981] usbcore: registered new interface driver cytherm
[ 5.577659] usbcore: registered new interface driver emi26 - firmware loader
[ 5.579584] usbcore: registered new interface driver emi62 - firmware loader
[ 5.581481] driver ftdi-elan
[ 5.583383] usbcore: registered new interface driver ftdi-elan
[ 5.585884] usbcore: registered new interface driver idmouse
[ 5.588206] usbcore: registered new interface driver iowarrior
[ 5.590530] usbcore: registered new interface driver usblcd
[ 5.592846] usbcore: registered new interface driver usbled
[ 5.594757] usbcore: registered new interface driver legousbtower
[ 5.596779] usbcore: registered new interface driver rio500
[ 5.598642] usbcore: registered new interface driver uss720
[ 5.600724] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[ 5.604944] uss720: NOTE: this is a special purpose driver to allow nonstandard
[ 5.608317] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[ 5.611701] uss720: If you just want to connect to a printer, use usblp instead
[ 5.615286] usbcore: registered new interface driver sisusb
[ 5.618182] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.623134] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.625099] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.703450] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 5.708145] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.711311] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 5.715087] usbcore: registered new interface driver appletouch
[ 5.718162] usbcore: registered new interface driver xpad
[ 5.721308] mk712: device not present
[ 5.723587] usbcore: registered new interface driver usbtouchscreen
[ 5.726224] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 5.728816] usbcore: registered new interface driver ati_remote2
[ 5.730929] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 5.736132] usbcore: registered new interface driver cm109
[ 5.738453] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 5.740955] usbcore: registered new interface driver keyspan_remote
[ 5.743527] usbcore: registered new interface driver powermate
[ 5.745568] wistron_btns: System unknown
[ 5.747163] i2c /dev entries driver
[ 5.748987] i2c-parport: adapter type unspecified
[ 5.750927] i2c-parport-light: adapter type unspecified
[ 5.753095] usbcore: registered new interface driver i2c-tiny-usb
[ 5.755289] scx200_i2c: no SCx200 gpio pins available
[ 5.757526] pps_ldisc: PPS line discipline registered
[ 5.759623] pps_parport: parallel port PPS client
[ 5.761589] parport0: cannot grant exclusive access for device pps_parport
[ 5.764038] pps_parport: couldn't register with parport0
[ 5.765984] Driver for 1-wire Dallas network protocol.
[ 5.767755] usbcore: registered new interface driver DS9490R
[ 5.769971] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 5.772499] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 5.776441] power_supply test_ac: uevent
[ 5.778205] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 5.780950] power_supply test_ac: prop ONLINE=1
[ 5.782617] power_supply test_ac: power_supply_changed
[ 5.786358] power_supply test_ac: power_supply_changed_work
[ 5.790239] power_supply test_ac: power_supply_update_gen_leds 1
[ 5.794494] power_supply test_ac: uevent
[ 5.796114] power_supply test_battery: uevent
[ 5.796117] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 5.796139] power_supply test_battery: prop STATUS=Discharging
[ 5.796144] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 5.796148] power_supply test_battery: prop HEALTH=Good
[ 5.796153] power_supply test_battery: prop PRESENT=1
[ 5.796157] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 5.796162] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 5.796165] power_supply test_battery: prop CHARGE_FULL=100
[ 5.796169] power_supply test_battery: prop CHARGE_NOW=50
[ 5.796172] power_supply test_battery: prop CAPACITY=50
[ 5.796176] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 5.796179] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 5.796182] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 5.796186] power_supply test_battery: prop MODEL_NAME=Test battery
[ 5.796190] power_supply test_battery: prop MANUFACTURER=Linux
[ 5.796193] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc5-00009-g4dea8e4
[ 5.796197] power_supply test_battery: prop TEMP=26
[ 5.796200] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 5.796497] power_supply test_battery: power_supply_changed
[ 5.796536] power_supply test_battery: power_supply_changed_work
[ 5.796545] power_supply test_battery: power_supply_update_bat_leds 2
[ 5.796556] power_supply test_battery: uevent
[ 5.796558] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 5.796568] power_supply test_battery: prop STATUS=Discharging
[ 5.796572] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 5.796575] power_supply test_battery: prop HEALTH=Good
[ 5.796578] power_supply test_battery: prop PRESENT=1
[ 5.796588] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 5.796593] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 5.796596] power_supply test_battery: prop CHARGE_FULL=100
[ 5.796600] power_supply test_battery: prop CHARGE_NOW=50
[ 5.796603] power_supply test_battery: prop CAPACITY=50
[ 5.796607] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 5.796610] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 5.796613] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 5.796617] power_supply test_battery: prop MODEL_NAME=Test battery
[ 5.796620] power_supply test_battery: prop MANUFACTURER=Linux
[ 5.796624] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc5-00009-g4dea8e4
[ 5.796627] power_supply test_battery: prop TEMP=26
[ 5.796630] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 5.796695] power_supply test_usb: uevent
[ 5.796697] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 5.796705] power_supply test_usb: prop ONLINE=1
[ 5.796722] power_supply test_usb: power_supply_changed
[ 5.796771] power_supply test_usb: power_supply_changed_work
[ 5.796775] power_supply test_usb: power_supply_update_gen_leds 1
[ 5.796778] power_supply test_usb: uevent
[ 5.796779] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 5.796782] power_supply test_usb: prop ONLINE=1
[ 5.799998] pc87360: PC8736x not detected, module not inserted
[ 5.801087] Bluetooth: Virtual HCI driver ver 1.4
[ 5.801262] Bluetooth: HCI UART driver ver 2.2
[ 5.801275] Bluetooth: HCI H4 protocol initialized
[ 5.801280] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 5.801335] usbcore: registered new interface driver bcm203x
[ 5.801377] usbcore: registered new interface driver bpa10x
[ 5.801412] usbcore: registered new interface driver bfusb
[ 5.807328] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
[ 5.807778] CAPI 2.0 started up with major 68 (middleware)
[ 5.807880] dss1_divert module successfully installed
[ 5.807881] gigaset: Driver for Gigaset 307x (debug build)
[ 5.807890] gigaset: Kernel CAPI interface
[ 5.808005] usbcore: registered new interface driver usb_gigaset
[ 5.808006] usb_gigaset: USB Driver for Gigaset 307x using M105
[ 5.809658] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.811605] usbcore: registered new interface driver usbhid
[ 5.811611] usbhid: USB HID core driver
[ 5.811987] oprofile: using timer interrupt.
[ 5.812150] NET: Registered protocol family 26
[ 5.812202] netem: version 1.3
[ 5.812207] u32 classifier
[ 5.812210] Performance counters on
[ 5.812210] input device check on
[ 5.812238] Netfilter messages via NETLINK v0.30.
[ 5.812248] nfnl_acct: registering with nfnetlink.
[ 5.812392] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@...sh.net>
[ 5.812402] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@...filter.org>
[ 5.812561] xt_time: kernel timezone is -0000
[ 5.812595] ip_set: protocol 6
[ 5.812627] IPVS: Registered protocols (TCP, UDP, SCTP, AH)
[ 5.812687] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 5.812693] IPVS: Each connection entry needs 256 bytes at least
[ 5.812786] IPVS: Creating netns size=1356 id=0
[ 6.005108] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 6.008163] power_supply test_ac: prop ONLINE=1
[ 6.011074] IPVS: ipvs loaded.
[ 6.012603] IPVS: [rr] scheduler registered.
[ 6.014503] IPVS: [wrr] scheduler registered.
[ 6.016621] IPVS: [lc] scheduler registered.
[ 6.018488] IPVS: [wlc] scheduler registered.
[ 6.020075] IPVS: [lblc] scheduler registered.
[ 6.022164] IPVS: [lblcr] scheduler registered.
[ 6.024134] IPVS: [dh] scheduler registered.
[ 6.026052] IPVS: [nq] scheduler registered.
[ 6.028136] ipip: IPv4 over IPv4 tunneling driver
[ 6.030867] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.033853] arp_tables: (C) 2002 David S. Miller
[ 6.036397] TCP: cubic registered
[ 6.038084] NET: Registered protocol family 17
[ 6.040077] NET: Registered protocol family 15
[ 6.042096] NET: Registered protocol family 5
[ 6.043985] NET: Registered protocol family 9
[ 6.045989] X25: Linux Version 0.2
[ 6.047649] can: controller area network core (rev 20120528 abi 9)
[ 6.050334] NET: Registered protocol family 29
[ 6.052500] can: raw protocol (rev 20120528)
[ 6.054408] can: netlink gateway (rev 20130117) max_hops=1
[ 6.058449] IrCOMM protocol (Dag Brattli)
[ 6.065925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.068232] Bluetooth: BNEP filters: protocol
[ 6.069728] Bluetooth: BNEP socket layer initialized
[ 6.071951] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[ 6.074195] Bluetooth: CMTP socket layer initialized
[ 6.076351] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.078755] Bluetooth: HIDP socket layer initialized
[ 6.080478] NET: Registered protocol family 33
[ 6.082540] Key type rxrpc registered
[ 6.084298] Key type rxrpc_s registered
[ 6.086616] cryptomgr_probe (111) used greatest stack depth: 6812 bytes left
[ 6.086663] RxRPC: Registered security type 2 'rxkad'
[ 6.086692] l2tp_core: L2TP core driver, V2.0
[ 6.086702] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 6.086729] l2tp_debugfs: L2TP debugfs support
[ 6.086730] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 6.086881] DECnet: Routing cache hash table of 256 buckets, 11Kbytes
[ 6.086929] NET: Registered protocol family 12
[ 6.086974] NET: Registered protocol family 35
[ 6.087056] 8021q: 802.1Q VLAN Support v1.8
[ 6.087602] DCCP: Activated CCID 2 (TCP-like)
[ 6.087614] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[ 6.088050] sctp: Hash tables configured (established 1365 bind 1489)
[ 6.088218] tipc: Activated (version 2.0.0)
[ 6.089064] NET: Registered protocol family 30
[ 6.089312] tipc: Started in single node mode
[ 6.089420] NET: Registered protocol family 37
[ 6.089432] Key type dns_resolver registered
[ 6.089451] Key type ceph registered
[ 6.089620] libceph: loaded (mon/osd proto 15/24)
[ 6.089834] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded
[ 6.089835] openvswitch: Open vSwitch switching datapath
[ 6.089964] mpls_gso: MPLS GSO support
[ 6.090331]
[ 6.090331] printing PIC contents
[ 6.090341] ... PIC IMR: ffff
[ 6.090345] ... PIC IRR: 1053
[ 6.090353] ... PIC ISR: 0000
[ 6.090357] ... PIC ELCR: 0c00
[ 6.090367] printing local APIC contents on CPU#0/0:
[ 6.090374] ... APIC ID: 00000000 (0)
[ 6.090378] ... APIC VERSION: 00050014
[ 6.090382] ... APIC TASKPRI: 00000000 (00)
[ 6.090385] ... APIC PROCPRI: 00000000
[ 6.090387] ... APIC LDR: 01000000
[ 6.090390] ... APIC DFR: ffffffff
[ 6.090392] ... APIC SPIV: 000001ff
[ 6.090393] ... APIC ISR field:
[ 6.090412] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.090413] ... APIC TMR field:
[ 6.090431] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.090431] ... APIC IRR field:
[ 6.090450] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.090455] ... APIC ESR: 00000000
[ 6.090460] ... APIC ICR: 000008fd
[ 6.090460] ... APIC ICR2: 02000000
[ 6.090463] ... APIC LVTT: 000200ef
[ 6.090465] ... APIC LVTPC: 00010000
[ 6.090467] ... APIC LVT0: 00010700
[ 6.090470] ... APIC LVT1: 00000400
[ 6.090472] ... APIC LVTERR: 000000fe
[ 6.090475] ... APIC TMICT: 0003d07e
[ 6.090478] ... APIC TMCCT: 00013d3d
[ 6.090480] ... APIC TDCR: 00000003
[ 6.090481]
[ 6.090482] number of MP IRQ sources: 15.
[ 6.090482] number of IO-APIC #0 registers: 24.
[ 6.090483] testing the IO APIC.......................
[ 6.090498] IO APIC #0......
[ 6.090498] .... register #00: 00000000
[ 6.090499] ....... : physical APIC id: 00
[ 6.090499] ....... : Delivery Type: 0
[ 6.090500] ....... : LTS : 0
[ 6.090500] .... register #01: 00170011
[ 6.090501] ....... : max redirection entries: 17
[ 6.090501] ....... : PRQ implemented: 0
[ 6.090501] ....... : IO APIC version: 11
[ 6.090502] .... register #02: 00000000
[ 6.090502] ....... : arbitration: 00
[ 6.090503] .... IRQ redirection table:
[ 6.090513] 1 0 0 0 0 0 0 00
[ 6.090522] 0 0 0 0 0 1 1 31
[ 6.090531] 0 0 0 0 0 1 1 30
[ 6.090540] 0 0 0 0 0 1 1 33
[ 6.090550] 1 0 0 0 0 1 1 34
[ 6.090559] 1 1 0 0 0 1 1 35
[ 6.090568] 0 0 0 0 0 1 1 36
[ 6.090578] 0 0 0 0 0 1 1 37
[ 6.090587] 0 0 0 0 0 1 1 38
[ 6.090596] 0 1 0 0 0 1 1 39
[ 6.090605] 1 1 0 0 0 1 1 3A
[ 6.090614] 1 1 0 0 0 1 1 3B
[ 6.090624] 0 0 0 0 0 1 1 3C
[ 6.090633] 0 0 0 0 0 1 1 3D
[ 6.090642] 0 0 0 0 0 1 1 3E
[ 6.090652] 0 0 0 0 0 1 1 3F
[ 6.090661] 1 0 0 0 0 0 0 00
[ 6.090670] 1 0 0 0 0 0 0 00
[ 6.090679] 1 0 0 0 0 0 0 00
[ 6.090688] 1 0 0 0 0 0 0 00
[ 6.090697] 1 0 0 0 0 0 0 00
[ 6.090706] 1 0 0 0 0 0 0 00
[ 6.090715] 1 0 0 0 0 0 0 00
[ 6.090724] 1 0 0 0 0 0 0 00
[ 6.090725] IRQ to pin mappings:
[ 6.090728] IRQ0 -> 0:2
[ 6.090729] IRQ1 -> 0:1
[ 6.090730] IRQ3 -> 0:3
[ 6.090731] IRQ4 -> 0:4
[ 6.090732] IRQ5 -> 0:5
[ 6.090733] IRQ6 -> 0:6
[ 6.090734] IRQ7 -> 0:7
[ 6.090735] IRQ8 -> 0:8
[ 6.090736] IRQ9 -> 0:9
[ 6.090737] IRQ10 -> 0:10
[ 6.090738] IRQ11 -> 0:11
[ 6.090739] IRQ12 -> 0:12
[ 6.090740] IRQ13 -> 0:13
[ 6.090741] IRQ14 -> 0:14
[ 6.090742] IRQ15 -> 0:15
[ 6.090743] .................................... done.
[ 6.090744] Using IPI Shortcut mode
[ 6.090936] Loading compiled-in X.509 certificates
[ 6.090950] Problem loading in-kernel X.509 certificate (-74)
[ 6.091365] bio: create slab <bio-1> at 1
[ 6.091876] Btrfs loaded, debug=on, assert=on, integrity-checker=on
[ 6.092060] Key type trusted registered
[ 6.279514] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.282414] EDD information not available.
[ 6.284361] debug: unmapping init [mem 0x82039000-0x82218fff]
[ 6.286803] Write protecting the kernel text: 11652k
[ 6.288948] Write protecting the kernel read-only data: 4080k
[ 6.292582] Failed to execute /init (error -8)
[ 6.295125] Starting init: /sbin/init exists but couldn't execute it (error -8)
[ 6.299442] Starting init: /etc/init exists but couldn't execute it (error -13)
[ 6.302942] Starting init: /bin/sh exists but couldn't execute it (error -8)
[ 6.307438] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 6.311314] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5-00009-g4dea8e4 #6
[ 6.311314] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 6.311314] 00000000 00000000 8f037f74 81b48a98 8f803770 8f037f98 81b3d3fa 81e07204
[ 6.311314] 82233ec0 81df9b08 81df98af 8f803770 81f717e0 00000000 8f037fac 81b38dfc
[ 6.311314] 81df9cd0 81df989f fffffff8 8f036000 81b5fd3b 81b38d30 00000000 00000000
[ 6.311314] Call Trace:
[ 6.311314] [<81b48a98>] dump_stack+0x48/0x60
[ 6.311314] [<81b3d3fa>] panic+0x82/0x180
[ 6.311314] [<81b38dfc>] kernel_init+0xcc/0xe0
[ 6.311314] [<81b5fd3b>] ret_from_kernel_thread+0x1b/0x30
[ 6.311314] [<81b38d30>] ? rest_init+0xc0/0xc0
[ 6.311314] Kernel Offset: 0x0 from 0x81000000 (relocation range: 0x80000000-0x907fdfff)
wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.14.0-rc5-00009-g4dea8e4 (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #6 SMP Fri Mar 7 18:30:39 CST 2014
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [800f1840]
[ 0.000000] mpc: f1850-f193c
[ 0.000000] initial memory mapped: [mem 0x00000000-0x02bfffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0f800000-0x0fbfffff]
[ 0.000000] [mem 0x0f800000-0x0fbfffff] page 4k
[ 0.000000] BRK [0x02790000, 0x02790fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x08000000-0x0f7fffff]
[ 0.000000] [mem 0x08000000-0x0f7fffff] page 4k
[ 0.000000] BRK [0x02791000, 0x02791fff] PGTABLE
[ 0.000000] BRK [0x02792000, 0x02792fff] PGTABLE
[ 0.000000] BRK [0x02793000, 0x02793fff] PGTABLE
[ 0.000000] BRK [0x02794000, 0x02794fff] PGTABLE
[ 0.000000] BRK [0x02795000, 0x02795fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
[ 0.000000] [mem 0x00100000-0x07ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff]
[ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k
[ 0.000000] RAMDISK: [mem 0x0fce6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 000f16b0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0fffe3f0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0fffe430 001137 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0fffff40 000040
[ 0.000000] ACPI: SSDT 0ffff6a0 000899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0ffff5b0 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0ffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fffe000
[ 0.000000] low ram: 0 - 0fffe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:fffb001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x0fffdfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] free_area_init_node: node 0, pgdat 8200a2e0, node_mem_map 8f951028
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 600 pages used for memmap
[ 0.000000] Normal zone: 61438 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffff8000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 330 pages/cpu @8f6bd000 s1338976 r0 d12704 u1351680
[ 0.000000] pcpu-alloc: s1338976 r0 d12704 u1351680 alloc=330*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] kvm-clock: cpu 0, msr 0:fffb001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr f6bf540
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796
[ 0.000000] Kernel command line: debug sched_debug apic=debug ignore_loglevel earlyprintk=ttyS0,115200 sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228784K/261744K available (11650K kernel code, 875K rwdata, 4076K rodata, 1920K init, 5512K bss, 32960K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffa93000 - 0xfffff000 (5552 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0x907fe000 - 0xff3fe000 (1772 MB)
[ 0.000000] lowmem : 0x80000000 - 0x8fffe000 ( 255 MB)
[ 0.000000] .init : 0x82039000 - 0x82219000 (1920 kB)
[ 0.000000] .data : 0x81b60dce - 0x82037fe0 (4956 kB)
[ 0.000000] .text : 0x81000000 - 0x81b60dce (11651 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Hierarchical RCU autobalancing is disabled.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=8f00a000 soft=8f00c000
[ 0.000000] ACPI: Core revision 20131218
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3807 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | |failed|
[ 0.000000] recursive read-lock #2: | ok | |failed|
[ 0.000000] mixed read-write-lock: |failed| |failed|
[ 0.000000] mixed write-read-lock: |failed| |failed|
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing:failed| ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context:failed| ok | ok |
[ 0.000000] try:failed| ok |failed|
[ 0.000000] block:failed| ok |failed|
[ 0.000000] spinlock:failed| ok |failed|
[ 0.000000] --------------------------------------------------------
[ 0.000000] 141 out of 253 testcases failed, as expected. |
[ 0.000000] ----------------------------------------------------
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] ODEBUG: selftest passed
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[ 0.013239] pid_max: default: 4096 minimum: 301
[ 0.014788] Mount-cache hash table entries: 512
[ 0.016841] Initializing cgroup subsys debug
[ 0.018735] Initializing cgroup subsys devices
[ 0.020032] Initializing cgroup subsys freezer
[ 0.022158] Initializing cgroup subsys net_cls
[ 0.024010] Initializing cgroup subsys blkio
[ 0.026123] Initializing cgroup subsys perf_event
[ 0.028028] Initializing cgroup subsys net_prio
[ 0.032182] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.032182] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.032182] tlb_flushall_shift: -1
[ 0.042916] debug: unmapping init [mem 0x82219000-0x82221fff]
[ 0.052889] Getting VERSION: 50014
[ 0.054861] Getting VERSION: 50014
[ 0.056029] Getting ID: 0
[ 0.057585] Getting ID: f000000
[ 0.060027] Getting LVT0: 8700
[ 0.061087] Getting LVT1: 8400
[ 0.062078] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.064098] enabled ExtINT on CPU#0
[ 0.066960] ENABLING IO-APIC IRQs
[ 0.068027] init IO_APIC IRQs
[ 0.069426] apic 0 pin 0 not connected
[ 0.072024] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.074175] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.076065] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.080045] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.084060] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.087259] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.088050] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.092050] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.096060] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.100025] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.104061] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.108060] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.112043] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.116060] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.120052] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.124052] apic 0 pin 16 not connected
[ 0.126099] apic 0 pin 17 not connected
[ 0.128011] apic 0 pin 18 not connected
[ 0.129923] apic 0 pin 19 not connected
[ 0.132006] apic 0 pin 20 not connected
[ 0.133808] apic 0 pin 21 not connected
[ 0.136011] apic 0 pin 22 not connected
[ 0.137961] apic 0 pin 23 not connected
[ 0.140159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.142130] smpboot: CPU0: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.145090] Using local APIC timer interrupts.
[ 0.145090] calibrating APIC timer ...
[ 0.148000] ... lapic delta = 6251195
[ 0.148000] ... PM-Timer delta = 358135
[ 0.148000] ... PM-Timer result ok
[ 0.148000] ..... delta 6251195
[ 0.148000] ..... mult: 268486780
[ 0.148000] ..... calibration result: 4000764
[ 0.148000] ..... CPU clock speed is 2694.3929 MHz.
[ 0.148000] ..... host bus clock speed is 1000.0764 MHz.
[ 0.148073] Performance Events: no PMU driver, software events only.
[ 0.153410] CPU 1 irqstacks, hard=8f086000 soft=8f090000
[ 0.155354] x86: Booting SMP configuration:
[ 0.156005] .... node #0, CPUs: #1
[ 0.012000] Initializing CPU#1
[ 0.012000] kvm-clock: cpu 1, msr 0:fffb021, secondary cpu clock
[ 0.012000] masked ExtINT on CPU#1
[ 0.173562] x86: Booted up 1 node, 2 CPUs
[ 0.173503] KVM setup async PF for cpu 1
[ 0.173503] kvm-stealtime: cpu 1, msr f809540
[ 0.176009] ----------------
[ 0.180008] | NMI testsuite:
[ 0.181618] --------------------
[ 0.183352] remote IPI: ok |
[ 0.197253] local IPI: ok |
[ 0.220032] --------------------
[ 0.222522] Good, all 2 testcases passed! |
[ 0.224014] ---------------------------------
[ 0.228016] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[ 0.232552] CPU0 attaching sched-domain:
[ 0.236033] domain 0: span 0-1 level CPU
[ 0.239014] groups: 0 1
[ 0.241193] CPU1 attaching sched-domain:
[ 0.244047] domain 0: span 0-1 level CPU
[ 0.246266] groups: 1 0
[ 0.249006] devtmpfs: initialized
[ 0.254320] xor: measuring software checksum speed
[ 0.296018] pIII_sse : 123.000 MB/sec
[ 0.336054] prefetch64-sse: 134.000 MB/sec
[ 0.339007] xor: using function: prefetch64-sse (134.000 MB/sec)
[ 0.340040] atomic64 test passed for i386+ platform with CX8 and with SSE
[ 0.348255] regulator-dummy: no parameters
[ 0.351838] NET: Registered protocol family 16
[ 0.352660] cpuidle: using governor ladder
[ 0.356018] cpuidle: using governor menu
[ 0.359544] ACPI: bus type PCI registered
[ 0.360116] PCI: PCI BIOS revision 2.10 entry at 0xfd4e3, last bus=0
[ 0.364007] PCI: Using configuration type 1 for base access
[ 0.380569] bio: create slab <bio-0> at 0
[ 0.452010] raid6: mmxx1 2865 MB/s
[ 0.520027] raid6: mmxx2 2605 MB/s
[ 0.588025] raid6: sse1x1 1969 MB/s
[ 0.656019] raid6: sse1x2 2600 MB/s
[ 0.724040] raid6: sse2x1 3953 MB/s
[ 0.792022] raid6: sse2x2 4016 MB/s
[ 0.795132] raid6: using algorithm sse2x2 (4016 MB/s)
[ 0.796022] raid6: using intx1 recovery algorithm
[ 0.800529] ACPI: Added _OSI(Module Device)
[ 0.802740] ACPI: Added _OSI(Processor Device)
[ 0.804025] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.806010] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.824533] ACPI: Interpreter enabled
[ 0.826471] ACPI: (supports S0 S5)
[ 0.828010] ACPI: Using IOAPIC for interrupt routing
[ 0.830175] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.852392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.855676] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.856045] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.860328] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.864155] PCI host bridge to bus 0000:00
[ 0.868007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.870474] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.872013] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.876014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.880026] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.883039] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.885106] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.892011] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.900574] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
[ 0.906231] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.908701] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.912017] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.916691] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.921217] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.925494] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 0.944144] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.949320] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.954123] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f]
[ 0.958005] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 0.971679] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.972831] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.981034] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.985031] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.998016] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 1.000744] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 1.005121] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[ 1.016720] pci_bus 0000:00: on NUMA node 0
[ 1.020298] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 1.023955] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.025745] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.029747] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 1.033602] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 1.038254] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 1.041747] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.041747] vgaarb: loaded
[ 1.044006] vgaarb: bridge control possible 0000:00:02.0
[ 1.045494] SCSI subsystem initialized
[ 1.048077] libata version 3.00 loaded.
[ 1.049699] ACPI: bus type USB registered
[ 1.049699] usbcore: registered new interface driver usbfs
[ 1.051363] usbcore: registered new interface driver hub
[ 1.054886] usbcore: registered new device driver usb
[ 1.054886] pps_core: LinuxPPS API ver. 1 registered
[ 1.056008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it>
[ 1.060026] PTP clock support registered
[ 1.061477] PCI: Using ACPI for IRQ routing
[ 1.062863] PCI: pci_cache_line_size set to 64 bytes
[ 1.064172] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.066094] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 1.068488] irda_init()
[ 1.069467] NET: Registered protocol family 23
[ 1.071111] Bluetooth: Core ver 2.18
[ 1.072059] NET: Registered protocol family 31
[ 1.073583] Bluetooth: HCI device and connection manager initialized
[ 1.076047] Bluetooth: HCI socket layer initialized
[ 1.077729] Bluetooth: L2CAP socket layer initialized
[ 1.080067] Bluetooth: SCO socket layer initialized
[ 1.083492] cfg80211: Calling CRDA to update world regulatory domain
[ 1.085850] Switched to clocksource kvm-clock
[ 1.086476] FS-Cache: Loaded
[ 1.087540] CacheFiles: Loaded
[ 1.088326] pnp: PnP ACPI init
[ 1.089499] ACPI: bus type PNP registered
[ 1.091018] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 1.095831] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.098067] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[ 1.101027] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.103307] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[ 1.106173] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.108414] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[ 1.111180] pnp 00:03: [dma 2]
[ 1.112355] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.114644] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[ 1.117451] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.119710] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 1.122606] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.125192] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.127582] pnp: PnP ACPI: found 7 devices
[ 1.129024] ACPI: bus type PNP unregistered
[ 1.169081] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.171304] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.174802] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.177509] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 1.179415] NET: Registered protocol family 2
[ 1.181393] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.184156] TCP bind hash table entries: 2048 (order: 4, 90112 bytes)
[ 1.186264] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.188508] TCP: reno registered
[ 1.189846] UDP hash table entries: 128 (order: 1, 12288 bytes)
[ 1.191454] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
[ 1.193572] NET: Registered protocol family 1
[ 1.195116] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.197312] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.199390] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.201786] pci 0000:00:02.0: Boot video device
[ 1.203392] PCI: CLS 0 bytes, default 64
[ 1.205211] Unpacking initramfs...
[ 2.144177] debug: unmapping init [mem 0x8fce6000-0x8ffeffff]
[ 2.147910] cryptomgr_test (24) used greatest stack depth: 7292 bytes left
[ 2.151185] cryptomgr_test (25) used greatest stack depth: 7280 bytes left
[ 2.153527] PCLMULQDQ-NI instructions are not detected.
[ 2.156056] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[ 2.159347] NatSemi SCx200 Driver
[ 2.162103] futex hash table entries: 16 (order: -3, 768 bytes)
[ 2.164977] Initialise system trusted keyring
[ 2.168199] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.176426] VFS: Disk quotas dquot_6.5.2
[ 2.178681] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.183159] DLM installed
[ 2.186719] NTFS driver 2.1.30 [Flags: R/O DEBUG].
[ 2.188662] ocfs2 stack glue: unable to register sysctl
[ 2.191364] ocfs2: Registered cluster interface o2cb
[ 2.194015] OCFS2 User DLM kernel interface loaded
[ 2.199885] msgmni has been set to 446
[ 2.211434] Key type asymmetric registered
[ 2.214822] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.220812] io scheduler noop registered (default)
[ 2.224495] io scheduler deadline registered
[ 2.227018] io scheduler cfq registered
[ 2.228119] list_sort_test: start testing list_sort()
[ 2.230879] test_string_helpers: Running tests...
[ 2.234133] no IO addresses supplied
[ 2.235090] usbcore: registered new interface driver udlfb
[ 2.236513] usbcore: registered new interface driver smscufx
[ 2.238550] kworker/u4:0 (84) used greatest stack depth: 6880 bytes left
[ 2.240651] uvesafb: failed to execute /sbin/v86d
[ 2.242872] uvesafb: make sure that the v86d helper is installed and executable
[ 2.246171] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-8)
[ 2.248827] uvesafb: vbe_init() failed with -22
[ 2.251067] uvesafb: probe of uvesafb.0 failed with error -22
[ 2.253577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.255701] ACPI: Power Button [PWRF]
[ 2.257880] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 2.259530] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.284028] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.288377] STMicroelectronics ASC driver initialized
[ 2.290753] serial: Freescale lpuart driver
[ 2.292439] lp: driver loaded but no devices found
[ 2.294304] toshiba: not a supported Toshiba laptop
[ 2.296553] ppdev: user-space parallel port driver
[ 2.298283] scx200_gpio: no SCx200 gpio present
[ 2.300338] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 2.302529] platform pc8736x_gpio.0: no device found
[ 2.304102] nsc_gpio initializing
[ 2.305447] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 2.307289] SyncLink PC Card driver $Revision: 4.34 $, tty major#245
[ 2.309348] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 2.312871] Hangcheck: Using getrawmonotonic().
[ 2.315519] parport_pc 00:04: reported by Plug and Play ACPI
[ 2.318497] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 2.419484] lp0: using parport0 (interrupt-driven).
[ 2.423671] Floppy drive(s): fd0 is 1.44M
[ 2.426951] loop: module loaded
[ 2.428451] rbd: loaded
[ 2.430781] blk-mq: CPU -> queue map
[ 2.433632] CPU 0 -> Queue 0
[ 2.436028] CPU 1 -> Queue 0
[ 2.438413] nullb0: unknown partition table
[ 2.441605] blk-mq: CPU -> queue map
[ 2.443556] CPU 0 -> Queue 0
[ 2.443762] FDC 0 is a S82078B
[ 2.448480] CPU 1 -> Queue 0
[ 2.450945] nullb1: unknown partition table
[ 2.454439] null: module loaded
[ 2.456686] zram: Created 1 device(s) ...
[ 2.458470] dummy-irq: no IRQ given. Use irq=N
[ 2.461813] lkdtm: No crash points registered, enable through debugfs
[ 2.465940] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 2.471533] c2port c2port0: C2 port uc added
[ 2.474727] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[ 2.479449] usbcore: registered new interface driver viperboard
[ 2.481564] Uniform Multi-Platform E-IDE driver
[ 2.483379] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 2.487142] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 2.491290] ide0: BM-DMA at 0xc060-0xc067
[ 2.494425] ide1: BM-DMA at 0xc068-0xc06f
[ 2.497995] Probing IDE interface ide0...
[ 3.071490] Probing IDE interface ide1...
[ 3.807704] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 4.479819] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 4.481162] hdc: MWDMA2 mode selected
[ 4.482148] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.483103] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.484318] ide-gd driver 1.18
[ 4.486936] Loading iSCSI transport class v2.0-870.
[ 4.488297] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 4.490501] osd: LOADED open-osd 0.2.1
[ 4.492000] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 4.497752] SSFDC read-only Flash Translation layer
[ 4.500682] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[ 4.504856] Failed to ioremap_nocache
[ 4.506917] slram: not enough parameters.
[ 4.637135] parport0: AVR Butterfly
[ 4.638705] parport0: cannot grant exclusive access for device spi-lm70llp
[ 4.640675] spi-lm70llp: spi_lm70llp probe fail, status -12
[ 4.642699] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 4.646731] eql: Equalizer2002: Simon Janes (simon@....com) and David S. Miller (davem@...hat.com)
[ 4.652318] tun: Universal TUN/TAP device driver, 1.6
[ 4.653988] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 4.656106] arcnet loaded.
[ 4.657079] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 4.659069] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[ 4.661508] arcnet: raw mode (`r') encapsulation support loaded.
[ 4.664165] arcnet: cap mode (`c') encapsulation support loaded.
[ 4.665717] arcnet: COM90xx chipset support
[ 4.965550] S3: No ARCnet cards found.
[ 4.967958] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@...oon.tc.umn.edu>
[ 4.970933] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@...ba.org>
[ 4.973765] slcan: serial line CAN interface driver
[ 4.975461] slcan: 10 dynamic interface channels.
[ 4.977081] CAN device driver interface
[ 4.978601] usbcore: registered new interface driver ems_usb
[ 4.980515] usbcore: registered new interface driver esd_usb2
[ 4.982530] usbcore: registered new interface driver kvaser_usb
[ 4.983821] usbcore: registered new interface driver peak_usb
[ 4.985107] usbcore: registered new interface driver usb_8dev
[ 4.986368] sja1000 CAN netdevice driver
[ 4.987275] sja1000_isa: insufficient parameters supplied
[ 4.988535] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@...ha.franken.de
[ 4.990325] usbcore: registered new interface driver irda-usb
[ 4.991610] usbcore: registered new interface driver stir4200
[ 4.993330] usbcore: registered new interface driver mcs7780
[ 4.994699] usbcore: registered new interface driver kingsun-sir
[ 4.995980] usbcore: registered new interface driver ks959-sir
[ 4.997500] NET3 PLIP version 2.4-parport gniibe@....co.jp
[ 4.998694] plip0: Parallel port at 0x378, using IRQ 7.
[ 5.002085] PPP generic driver version 2.4.2
[ 5.003402] PPP BSD Compression module registered
[ 5.004728] PPP Deflate Compression module registered
[ 5.006778] PPP MPPE Compression module registered
[ 5.008871] NET: Registered protocol family 24
[ 5.010958] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[ 5.013234] usbcore: registered new interface driver kaweth
[ 5.015802] usbcore: registered new interface driver r8152
[ 5.018389] usbcore: registered new interface driver cdc_phonet
[ 5.020610] parport0: cannot grant exclusive access for device ks0108
[ 5.023161] ks0108: ERROR: parport didn't register new device
[ 5.025900] cfag12864b: ERROR: ks0108 is not initialized
[ 5.028474] cfag12864bfb: ERROR: cfag12864b is not initialized
[ 5.032765] aoe: AoE v85 initialised.
[ 5.034955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.037822] ehci-pci: EHCI PCI platform driver
[ 5.039056] ehci-platform: EHCI generic platform driver
[ 5.040627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.042299] ohci-pci: OHCI PCI platform driver
[ 5.043600] ohci-platform: OHCI generic platform driver
[ 5.045224] driver u132_hcd
[ 5.047001] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[ 5.050641] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.057585] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[ 5.061313] 4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.068248] usbcore: registered new interface driver cdc_acm
[ 5.071628] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.077308] usbcore: registered new interface driver usblp
[ 5.079054] usbcore: registered new interface driver cdc_wdm
[ 5.080698] usbcore: registered new interface driver usbtmc
[ 5.082344] usbcore: registered new interface driver usb-storage
[ 5.083628] usbcore: registered new interface driver ums-alauda
[ 5.085186] usbcore: registered new interface driver ums-cypress
[ 5.086807] usbcore: registered new interface driver ums_eneub6250
[ 5.088367] usbcore: registered new interface driver ums-jumpshot
[ 5.089855] usbcore: registered new interface driver ums-sddr09
[ 5.091309] usbcore: registered new interface driver ums-usbat
[ 5.092789] usbcore: registered new interface driver mdc800
[ 5.095100] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 5.098140] usbcore: registered new interface driver microtekX6
[ 5.100493] usbcore: registered new interface driver usbserial
[ 5.102613] usbcore: registered new interface driver usbserial_generic
[ 5.104776] usbserial: USB Serial support registered for generic
[ 5.106999] usbcore: registered new interface driver aircable
[ 5.109678] usbserial: USB Serial support registered for aircable
[ 5.112632] usbcore: registered new interface driver ark3116
[ 5.115323] usbserial: USB Serial support registered for ark3116
[ 5.118294] usbcore: registered new interface driver belkin_sa
[ 5.120153] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 5.122693] usbcore: registered new interface driver ch341
[ 5.123973] usbserial: USB Serial support registered for ch341-uart
[ 5.125390] usbcore: registered new interface driver cp210x
[ 5.126805] usbserial: USB Serial support registered for cp210x
[ 5.128650] usbcore: registered new interface driver cyberjack
[ 5.131294] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 5.135471] usbcore: registered new interface driver cypress_m8
[ 5.137726] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 5.140291] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 5.142815] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 5.145777] usbcore: registered new interface driver usb_debug
[ 5.148460] usbserial: USB Serial support registered for debug
[ 5.151218] usbcore: registered new interface driver digi_acceleport
[ 5.153116] usbserial: USB Serial support registered for Digi 2 port USB adapter
[ 5.155729] usbserial: USB Serial support registered for Digi 4 port USB adapter
[ 5.158447] usbcore: registered new interface driver empeg
[ 5.159999] usbserial: USB Serial support registered for empeg
[ 5.161458] usbcore: registered new interface driver ftdi_sio
[ 5.162861] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 5.164781] usbcore: registered new interface driver ipw
[ 5.166056] usbserial: USB Serial support registered for IPWireless converter
[ 5.167772] usbcore: registered new interface driver keyspan
[ 5.169937] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 5.172584] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 5.175522] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 5.179215] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 5.183082] usbcore: registered new interface driver metro_usb
[ 5.185851] usbserial: USB Serial support registered for Metrologic USB to Serial
[ 5.189657] usbcore: registered new interface driver mos7840
[ 5.192279] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 5.195874] usbcore: registered new interface driver mxuport
[ 5.197283] usbserial: USB Serial support registered for MOXA UPort
[ 5.199390] usbcore: registered new interface driver navman
[ 5.201171] usbserial: USB Serial support registered for navman
[ 5.203981] usbcore: registered new interface driver omninet
[ 5.206699] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 5.210607] usbcore: registered new interface driver opticon
[ 5.213337] usbserial: USB Serial support registered for opticon
[ 5.216133] usbcore: registered new interface driver option
[ 5.218357] usbserial: USB Serial support registered for GSM modem (1-port)
[ 5.220033] usbcore: registered new interface driver qcaux
[ 5.221423] usbserial: USB Serial support registered for qcaux
[ 5.223681] usbcore: registered new interface driver qcserial
[ 5.226458] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.229354] usbcore: registered new interface driver usb_serial_simple
[ 5.232092] usbserial: USB Serial support registered for zio
[ 5.234250] usbserial: USB Serial support registered for funsoft
[ 5.236556] usbserial: USB Serial support registered for flashloader
[ 5.238280] usbserial: USB Serial support registered for vivopay
[ 5.239657] usbserial: USB Serial support registered for moto_modem
[ 5.241745] usbserial: USB Serial support registered for hp4x
[ 5.243999] usbserial: USB Serial support registered for suunto
[ 5.245584] usbserial: USB Serial support registered for siemens_mpi
[ 5.246997] usbcore: registered new interface driver spcp8x5
[ 5.248229] usbserial: USB Serial support registered for SPCP8x5
[ 5.250686] usbcore: registered new interface driver ssu100
[ 5.252857] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[ 5.256939] usbcore: registered new interface driver visor
[ 5.259281] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 5.263216] usbserial: USB Serial support registered for Sony Clie 5.0
[ 5.266247] usbserial: USB Serial support registered for Sony Clie 3.5
[ 5.269106] usbcore: registered new interface driver wishbone_serial
[ 5.271921] usbserial: USB Serial support registered for wishbone_serial
[ 5.274225] usbcore: registered new interface driver whiteheat
[ 5.275752] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 5.279066] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[ 5.281494] usbcore: registered new interface driver xsens_mt
[ 5.283329] usbserial: USB Serial support registered for xsens_mt
[ 5.285610] usbcore: registered new interface driver zte_ev
[ 5.287123] usbserial: USB Serial support registered for zte_ev
[ 5.289731] usbcore: registered new interface driver appledisplay
[ 5.292044] usbcore: registered new interface driver cytherm
[ 5.294238] usbcore: registered new interface driver emi26 - firmware loader
[ 5.296847] usbcore: registered new interface driver emi62 - firmware loader
[ 5.299079] driver ftdi-elan
[ 5.300378] usbcore: registered new interface driver ftdi-elan
[ 5.301749] usbcore: registered new interface driver idmouse
[ 5.302978] usbcore: registered new interface driver iowarrior
[ 5.304252] usbcore: registered new interface driver usblcd
[ 5.305493] usbcore: registered new interface driver usbled
[ 5.306719] usbcore: registered new interface driver legousbtower
[ 5.308025] usbcore: registered new interface driver rio500
[ 5.309271] usbcore: registered new interface driver uss720
[ 5.310518] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[ 5.312532] uss720: NOTE: this is a special purpose driver to allow nonstandard
[ 5.314207] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[ 5.315878] uss720: If you just want to connect to a printer, use usblp instead
[ 5.317697] usbcore: registered new interface driver sisusb
[ 5.319244] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.321828] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.323217] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.369532] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 5.372520] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.376275] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 5.378423] usbcore: registered new interface driver appletouch
[ 5.379291] usbcore: registered new interface driver xpad
[ 5.380128] mk712: device not present
[ 5.380179] usbcore: registered new interface driver usbtouchscreen
[ 5.380671] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 5.380718] usbcore: registered new interface driver ati_remote2
[ 5.380753] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 5.380794] usbcore: registered new interface driver cm109
[ 5.380800] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 5.380939] usbcore: registered new interface driver keyspan_remote
[ 5.381044] usbcore: registered new interface driver powermate
[ 5.381059] wistron_btns: System unknown
[ 5.381100] i2c /dev entries driver
[ 5.381213] i2c-parport: adapter type unspecified
[ 5.381213] i2c-parport-light: adapter type unspecified
[ 5.381251] usbcore: registered new interface driver i2c-tiny-usb
[ 5.381255] scx200_i2c: no SCx200 gpio pins available
[ 5.381305] pps_ldisc: PPS line discipline registered
[ 5.381306] pps_parport: parallel port PPS client
[ 5.381311] parport0: cannot grant exclusive access for device pps_parport
[ 5.381312] pps_parport: couldn't register with parport0
[ 5.381367] Driver for 1-wire Dallas network protocol.
[ 5.381444] usbcore: registered new interface driver DS9490R
[ 5.381447] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 5.381492] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 5.381605] power_supply test_ac: uevent
[ 5.381608] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 5.381620] power_supply test_ac: prop ONLINE=1
[ 5.381660] power_supply test_ac: power_supply_changed
[ 5.381688] power_supply test_ac: power_supply_changed_work
[ 5.381692] power_supply test_ac: power_supply_update_gen_leds 1
[ 5.381703] power_supply test_ac: uevent
[ 5.381704] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[ 5.381709] power_supply test_ac: prop ONLINE=1
[ 5.381774] power_supply test_battery: uevent
[ 5.381775] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 5.381779] power_supply test_battery: prop STATUS=Discharging
[ 5.381781] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 5.381783] power_supply test_battery: prop HEALTH=Good
[ 5.381784] power_supply test_battery: prop PRESENT=1
[ 5.381786] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 5.381788] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 5.381789] power_supply test_battery: prop CHARGE_FULL=100
[ 5.381791] power_supply test_battery: prop CHARGE_NOW=50
[ 5.381792] power_supply test_battery: prop CAPACITY=50
[ 5.381794] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 5.381795] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 5.381797] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 5.381798] power_supply test_battery: prop MODEL_NAME=Test battery
[ 5.381800] power_supply test_battery: prop MANUFACTURER=Linux
[ 5.381801] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc5-00009-g4dea8e4
[ 5.381803] power_supply test_battery: prop TEMP=26
[ 5.381804] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 5.381956] power_supply test_battery: power_supply_changed
[ 5.381965] power_supply test_battery: power_supply_changed_work
[ 5.381968] power_supply test_battery: power_supply_update_bat_leds 2
[ 5.381972] power_supply test_battery: uevent
[ 5.381973] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[ 5.381983] power_supply test_battery: prop STATUS=Discharging
[ 5.381984] power_supply test_battery: prop CHARGE_TYPE=Fast
[ 5.381988] power_supply test_battery: prop HEALTH=Good
[ 5.381989] power_supply test_battery: prop PRESENT=1
[ 5.381991] power_supply test_battery: prop TECHNOLOGY=Li-ion
[ 5.381993] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[ 5.381995] power_supply test_battery: prop CHARGE_FULL=100
[ 5.381996] power_supply test_battery: prop CHARGE_NOW=50
[ 5.381998] power_supply test_battery: prop CAPACITY=50
[ 5.381999] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[ 5.382001] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[ 5.382002] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[ 5.382004] power_supply test_battery: prop MODEL_NAME=Test battery
[ 5.382005] power_supply test_battery: prop MANUFACTURER=Linux
[ 5.382007] power_supply test_battery: prop SERIAL_NUMBER=3.14.0-rc5-00009-g4dea8e4
[ 5.382008] power_supply test_battery: prop TEMP=26
[ 5.382009] power_supply test_battery: prop VOLTAGE_NOW=3300
[ 5.382052] power_supply test_usb: uevent
[ 5.382052] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 5.382056] power_supply test_usb: prop ONLINE=1
[ 5.382064] power_supply test_usb: power_supply_changed
[ 5.382078] power_supply test_usb: power_supply_changed_work
[ 5.382082] power_supply test_usb: power_supply_update_gen_leds 1
[ 5.382085] power_supply test_usb: uevent
[ 5.382086] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[ 5.382089] power_supply test_usb: prop ONLINE=1
[ 5.383489] pc87360: PC8736x not detected, module not inserted
[ 5.383978] Bluetooth: Virtual HCI driver ver 1.4
[ 5.538244] Bluetooth: HCI UART driver ver 2.2
[ 5.539536] Bluetooth: HCI H4 protocol initialized
[ 5.540929] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 5.542672] usbcore: registered new interface driver bcm203x
[ 5.544321] usbcore: registered new interface driver bpa10x
[ 5.545838] usbcore: registered new interface driver bfusb
[ 5.559827] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
[ 5.563255] CAPI 2.0 started up with major 68 (middleware)
[ 5.565129] dss1_divert module successfully installed
[ 5.566923] gigaset: Driver for Gigaset 307x (debug build)
[ 5.568720] gigaset: Kernel CAPI interface
[ 5.570603] usbcore: registered new interface driver usb_gigaset
[ 5.572189] usb_gigaset: USB Driver for Gigaset 307x using M105
[ 5.576403] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.582360] usbcore: registered new interface driver usbhid
[ 5.585194] usbhid: USB HID core driver
[ 5.587641] oprofile: using timer interrupt.
[ 5.589959] NET: Registered protocol family 26
[ 5.592241] netem: version 1.3
[ 5.593885] u32 classifier
[ 5.595415] Performance counters on
[ 5.597331] input device check on
[ 5.599287] Netfilter messages via NETLINK v0.30.
[ 5.600682] nfnl_acct: registering with nfnetlink.
[ 5.601857] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@...sh.net>
[ 5.603427] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@...filter.org>
[ 5.606560] xt_time: kernel timezone is -0000
[ 5.608599] ip_set: protocol 6
[ 5.610285] IPVS: Registered protocols (TCP, UDP, SCTP, AH)
[ 5.612013] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 5.613906] IPVS: Each connection entry needs 256 bytes at least
[ 5.616864] IPVS: Creating netns size=1356 id=0
[ 5.619360] IPVS: ipvs loaded.
[ 5.620155] IPVS: [rr] scheduler registered.
[ 5.621169] IPVS: [wrr] scheduler registered.
[ 5.622193] IPVS: [lc] scheduler registered.
[ 5.623203] IPVS: [wlc] scheduler registered.
[ 5.624895] IPVS: [lblc] scheduler registered.
[ 5.627027] IPVS: [lblcr] scheduler registered.
[ 5.629132] IPVS: [dh] scheduler registered.
[ 5.631317] IPVS: [nq] scheduler registered.
[ 5.633322] ipip: IPv4 over IPv4 tunneling driver
[ 5.636224] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.639382] arp_tables: (C) 2002 David S. Miller
[ 5.641568] TCP: cubic registered
[ 5.643408] NET: Registered protocol family 17
[ 5.645473] NET: Registered protocol family 15
[ 5.647807] NET: Registered protocol family 5
[ 5.649939] NET: Registered protocol family 9
[ 5.651101] X25: Linux Version 0.2
[ 5.652850] can: controller area network core (rev 20120528 abi 9)
[ 5.655683] NET: Registered protocol family 29
[ 5.657795] can: raw protocol (rev 20120528)
[ 5.659743] can: netlink gateway (rev 20130117) max_hops=1
[ 5.662126] IrCOMM protocol (Dag Brattli)
[ 5.670299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.671609] Bluetooth: BNEP filters: protocol
[ 5.672650] Bluetooth: BNEP socket layer initialized
[ 5.673776] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[ 5.674913] Bluetooth: CMTP socket layer initialized
[ 5.676025] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.679822] Bluetooth: HIDP socket layer initialized
[ 5.683860] NET: Registered protocol family 33
[ 5.686828] Key type rxrpc registered
[ 5.688672] Key type rxrpc_s registered
[ 5.690693] cryptomgr_probe (111) used greatest stack depth: 6748 bytes left
[ 5.690726] RxRPC: Registered security type 2 'rxkad'
[ 5.690756] l2tp_core: L2TP core driver, V2.0
[ 5.690769] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 5.690793] l2tp_debugfs: L2TP debugfs support
[ 5.690794] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 5.690927] DECnet: Routing cache hash table of 256 buckets, 11Kbytes
[ 5.690976] NET: Registered protocol family 12
[ 5.691013] NET: Registered protocol family 35
[ 5.691107] 8021q: 802.1Q VLAN Support v1.8
[ 5.691635] DCCP: Activated CCID 2 (TCP-like)
[ 5.691648] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[ 5.692019] sctp: Hash tables configured (established 1365 bind 1489)
[ 5.692166] tipc: Activated (version 2.0.0)
[ 5.693601] NET: Registered protocol family 30
[ 5.694182] tipc: Started in single node mode
[ 5.694415] NET: Registered protocol family 37
[ 5.694550] Key type dns_resolver registered
[ 5.694591] Key type ceph registered
[ 5.694974] libceph: loaded (mon/osd proto 15/24)
[ 5.695448] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded
[ 5.695450] openvswitch: Open vSwitch switching datapath
[ 5.695668] mpls_gso: MPLS GSO support
[ 5.696312]
[ 5.696312] printing PIC contents
[ 5.696330] ... PIC IMR: ffff
[ 5.696340] ... PIC IRR: 1053
[ 5.696357] ... PIC ISR: 0000
[ 5.696366] ... PIC ELCR: 0c00
[ 5.696389] printing local APIC contents on CPU#0/0:
[ 5.696405] ... APIC ID: 00000000 (0)
[ 5.696411] ... APIC VERSION: 00050014
[ 5.696418] ... APIC TASKPRI: 00000000 (00)
[ 5.696424] ... APIC PROCPRI: 00000000
[ 5.696430] ... APIC LDR: 01000000
[ 5.696436] ... APIC DFR: ffffffff
[ 5.696441] ... APIC SPIV: 000001ff
[ 5.696442] ... APIC ISR field:
[ 5.696486] 0000000000000000000000000000000000000000000000000000000000000000
[ 5.696487] ... APIC TMR field:
[ 5.696528] 0000000000000000000000000000000000000000000000000000000000000000
[ 5.696529] ... APIC IRR field:
[ 5.696569] 0000000000000000000000000000000000000000000000000000000000000000
[ 5.696580] ... APIC ESR: 00000000
[ 5.696590] ... APIC ICR: 000008fd
[ 5.696591] ... APIC ICR2: 02000000
[ 5.696597] ... APIC LVTT: 000200ef
[ 5.696602] ... APIC LVTPC: 00010000
[ 5.696608] ... APIC LVT0: 00010700
[ 5.696613] ... APIC LVT1: 00000400
[ 5.696619] ... APIC LVTERR: 000000fe
[ 5.696625] ... APIC TMICT: 0003d0bf
[ 5.696631] ... APIC TMCCT: 0001b473
[ 5.696637] ... APIC TDCR: 00000003
[ 5.696638]
[ 5.696640] number of MP IRQ sources: 15.
[ 5.696641] number of IO-APIC #0 registers: 24.
[ 5.696642] testing the IO APIC.......................
[ 5.696675] IO APIC #0......
[ 5.696676] .... register #00: 00000000
[ 5.696677] ....... : physical APIC id: 00
[ 5.696678] ....... : Delivery Type: 0
[ 5.696679] ....... : LTS : 0
[ 5.696680] .... register #01: 00170011
[ 5.696681] ....... : max redirection entries: 17
[ 5.696681] ....... : PRQ implemented: 0
[ 5.696682] ....... : IO APIC version: 11
[ 5.696683] .... register #02: 00000000
[ 5.696684] ....... : arbitration: 00
[ 5.696685] .... IRQ redirection table:
[ 5.696707] 1 0 0 0 0 0 0 00
[ 5.696729] 0 0 0 0 0 1 1 31
[ 5.696753] 0 0 0 0 0 1 1 30
[ 5.696763] 0 0 0 0 0 1 1 33
[ 5.696772] 1 0 0 0 0 1 1 34
[ 5.696781] 1 1 0 0 0 1 1 35
[ 5.696790] 0 0 0 0 0 1 1 36
[ 5.696822] 0 0 0 0 0 1 1 37
[ 5.696843] 0 0 0 0 0 1 1 38
[ 5.696863] 0 1 0 0 0 1 1 39
[ 5.696884] 1 1 0 0 0 1 1 3A
[ 5.696904] 1 1 0 0 0 1 1 3B
[ 5.696925] 0 0 0 0 0 1 1 3C
[ 5.696946] 0 0 0 0 0 1 1 3D
[ 5.696967] 0 0 0 0 0 1 1 3E
[ 5.696987] 0 0 0 0 0 1 1 3F
[ 5.697008] 1 0 0 0 0 0 0 00
[ 5.697028] 1 0 0 0 0 0 0 00
[ 5.697049] 1 0 0 0 0 0 0 00
[ 5.697069] 1 0 0 0 0 0 0 00
[ 5.697090] 1 0 0 0 0 0 0 00
[ 5.697110] 1 0 0 0 0 0 0 00
[ 5.697131] 1 0 0 0 0 0 0 00
[ 5.697151] 1 0 0 0 0 0 0 00
[ 5.697152] IRQ to pin mappings:
[ 5.697157] IRQ0 -> 0:2
[ 5.697159] IRQ1 -> 0:1
[ 5.697162] IRQ3 -> 0:3
[ 5.697164] IRQ4 -> 0:4
[ 5.697166] IRQ5 -> 0:5
[ 5.697168] IRQ6 -> 0:6
[ 5.697170] IRQ7 -> 0:7
[ 5.697172] IRQ8 -> 0:8
[ 5.697174] IRQ9 -> 0:9
[ 5.697177] IRQ10 -> 0:10
[ 5.697179] IRQ11 -> 0:11
[ 5.697181] IRQ12 -> 0:12
[ 5.697184] IRQ13 -> 0:13
[ 5.697186] IRQ14 -> 0:14
[ 5.697188] IRQ15 -> 0:15
[ 5.697189] .................................... done.
[ 5.697190] Using IPI Shortcut mode
[ 5.889704] Loading compiled-in X.509 certificates
[ 5.890857] Problem loading in-kernel X.509 certificate (-74)
[ 5.892573] bio: create slab <bio-1> at 1
[ 5.894338] Btrfs loaded, debug=on, assert=on, integrity-checker=on
[ 5.897689] Key type trusted registered
[ 5.900830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.903528] EDD information not available.
[ 5.905654] debug: unmapping init [mem 0x82039000-0x82218fff]
[ 5.908755] Write protecting the kernel text: 11652k
[ 5.911243] Write protecting the kernel read-only data: 4080k
[ 5.913835] Failed to execute /init (error -8)
[ 5.916046] Starting init: /sbin/init exists but couldn't execute it (error -8)
[ 5.918907] Starting init: /etc/init exists but couldn't execute it (error -13)
[ 5.921981] Starting init: /bin/sh exists but couldn't execute it (error -8)
[ 5.924289] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 5.928232] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5-00009-g4dea8e4 #6
[ 5.928232] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 5.928232] 00000000 00000000 8f037f74 81b48a98 8f803770 8f037f98 81b3d3fa 81e07204
[ 5.928232] 82233ec0 81df9b08 81df98af 8f803770 81f717e0 00000000 8f037fac 81b38dfc
[ 5.928232] 81df9cd0 81df989f fffffff8 8f036000 81b5fd3b 81b38d30 00000000 00000000
[ 5.928232] Call Trace:
[ 5.928232] [<81b48a98>] dump_stack+0x48/0x60
[ 5.928232] [<81b3d3fa>] panic+0x82/0x180
[ 5.928232] [<81b38dfc>] kernel_init+0xcc/0xe0
[ 5.928232] [<81b5fd3b>] ret_from_kernel_thread+0x1b/0x30
[ 5.928232] [<81b38d30>] ? rest_init+0xc0/0xc0
[ 5.928232] Kernel Offset: 0x0 from 0x81000000 (relocation range: 0x80000000-0x907fdfff)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists