[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1394197751-28984-6-git-send-email-rogerq@ti.com>
Date: Fri, 7 Mar 2014 15:09:08 +0200
From: Roger Quadros <rogerq@...com>
To: <balbi@...com>, <tony@...mide.com>
CC: <kishon@...com>, <george.cherian@...com>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <rogerq@...com>
Subject: [PATCH 5/8] phy: omap-usb2: Add clock names to Documentation binding
Add "wkupclk" and "refclk" information to DT binding information.
Signed-off-by: Roger Quadros <rogerq@...com>
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 4ab9cb1..49c381c 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -36,6 +36,11 @@ Required properties:
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+ - clock-names: should include:
+ * "wkupclk" - wakeup clock.
+ * "refclk" - reference clock (optional).
Optional properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
@@ -48,6 +53,8 @@ usb2phy@...ad080 {
reg = <0x4a0ad080 0x58>;
ctrl-module = <&omap_control_usb>;
#phy-cells = <0>;
+ clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk", "refclk";
};
TI PIPE3 PHY
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists