| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140307174614.GA25283@core.coreip.homeip.net>
Date: Fri, 7 Mar 2014 09:46:14 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: "Opensource [Steve Twiss]" <stwiss.opensource@...semi.com>
Cc: David Dajun Chen <david.chen@...semi.com>,
LKML-INPUT <linux-input@...r.kernel.org>,
LKML-KERNEL <linux-kernel@...r.kernel.org>
Subject: Re: [RFC V1 2/2] input: misc: da9063: OnKey driver
Hi Steve,
On Fri, Mar 07, 2014 at 12:37:45PM +0000, Opensource [Steve Twiss] wrote:
> From: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
>
> Add the OnKey driver for DA9063.
>
>
> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
> ---
> Checks performed with next-20140307/scripts/checkpatch.pl
> da9063-onkey.c total: 0 errors, 0 warnings, 202 lines checked
> Kconfig total: 0 errors, 11 warnings, 679 lines checked
> Makefile total: 0 errors, 0 warnings, 66 lines checked
>
> Hello,
>
> This is a RFC for the Dialog DA9063 Onkey driver.
>
> Dependencies:
>
> This driver makes use of the name field "ONKEY" as part of the
> function call: platform_get_irq_byname();
>
> This driver is therefore dependent on this change to the name field
> in the properties of the the OnKey IORESOURCE_IRQ resource structure
> (part of the mfd_cell Onkey resource inside da9063-core.c). This
> change will be added as part of the final set when I submit all patches
> as a single PATCH set.
>
> This patch applies against kernel version linux-next next-20140307
>
> Regards,
> Steve Twiss, Dialog Semiconductor Ltd.
>
>
>
> drivers/input/misc/Kconfig | 10 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/da9063-onkey.c | 202 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 213 insertions(+)
> create mode 100644 drivers/input/misc/da9063-onkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 762e6d2..3deb008 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -522,6 +522,16 @@ config INPUT_DA9055_ONKEY
> To compile this driver as a module, choose M here: the module
> will be called da9055_onkey.
>
> +config INPUT_DA9063_ONKEY
> + tristate "Dialog DA9063 OnKey"
> + depends on MFD_DA9063
> + help
> + Support the ONKEY of Dialog DA9063 Power Management IC as an
> + input device reporting power button statue.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called da9063-onkey.
> +
> config INPUT_DM355EVM
> tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
> depends on MFD_DM355EVM_MSP
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index cda71fc..f40caa7 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
> obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
> obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
> +obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063-onkey.o
> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
> diff --git a/drivers/input/misc/da9063-onkey.c b/drivers/input/misc/da9063-onkey.c
> new file mode 100644
> index 0000000..654f52b
> --- /dev/null
> +++ b/drivers/input/misc/da9063-onkey.c
> @@ -0,0 +1,202 @@
> +/* da9063-onkey.c - Onkey device driver for DA9063
> + * Copyright (C) 2013 Dialog Semiconductor Ltd.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Library General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Library General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/errno.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/workqueue.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/da9063/core.h>
> +#include <linux/mfd/da9063/pdata.h>
> +#include <linux/mfd/da9063/registers.h>
> +
> +struct da9063_onkey {
> + struct da9063 *hw;
> + struct delayed_work work;
> + struct input_dev *input;
> + bool key_power;
> +};
> +
> +static void da9063_poll_on(struct work_struct *work)
> +{
> + struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
> + work.work);
> + unsigned int val;
> + int poll = 1;
Please use booleans for boolean data:
bool poll = true;
> + int ret;
> +
> + /* poll to see when the pin is deasserted */
> + ret = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
> + if (ret < 0) {
> + dev_err(&onkey->input->dev,
> + "Failed to read ON status: %d\n", ret);
> + goto err_poll;
> + }
> +
> + if (!(val & DA9063_NONKEY)) {
> + ret = regmap_update_bits(onkey->hw->regmap,
> + DA9063_REG_CONTROL_B,
> + DA9063_NONKEY_LOCK, 0);
> + if (ret < 0) {
> + dev_err(&onkey->input->dev,
> + "Failed to reset the Key Delay %d\n", ret);
> + goto err_poll;
> + }
> +
> + input_report_key(onkey->input, KEY_POWER, 0);
> + input_sync(onkey->input);
This is confusing. Why we report key only if we successfully did the
first write but we do not care about the second?
> +
> + /* unmask the onkey interrupt again */
> + ret = regmap_update_bits(onkey->hw->regmap,
> + DA9063_REG_IRQ_MASK_A,
> + DA9063_NONKEY, 0);
> + if (ret < 0) {
> + dev_err(&onkey->input->dev,
> + "Failed to unmask the onkey IRQ: %d\n", ret);
> + goto err_poll;
> + }
> +
> + poll = 0;
poll = false;
> + }
> +
> +err_poll:
> + if (poll)
> + schedule_delayed_work(&onkey->work, 50);
> +}
> +
> +static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
> +{
> + struct da9063_onkey *onkey = data;
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
> + if (onkey->key_power && (ret >= 0) && (val & DA9063_NONKEY)) {
> + ret = regmap_update_bits(onkey->hw->regmap,
> + DA9063_REG_IRQ_MASK_A,
> + DA9063_NONKEY, 1);
> + if (ret < 0)
> + dev_err(&onkey->input->dev,
> + "Failed to mask the onkey IRQ: %d\n", ret);
> +
> + input_report_key(onkey->input, KEY_POWER, 1);
> + input_sync(onkey->input);
> +
> + schedule_delayed_work(&onkey->work, 0);
> + dev_dbg(&onkey->input->dev, "KEY_POWER pressed.\n");
> + } else {
> + input_report_key(onkey->input, KEY_SLEEP, 1);
You need input_sync() here as well.
> + input_report_key(onkey->input, KEY_SLEEP, 0);
> + input_sync(onkey->input);
> + dev_dbg(&onkey->input->dev, "KEY_SLEEP pressed.\n");
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int da9063_onkey_probe(struct platform_device *pdev)
> +{
> + struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
> + struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
> + struct da9063_onkey *onkey;
> + bool kp_tmp = true;
> + int ret = 0;
> + int irq;
> +
> + if (pdata)
> + kp_tmp = pdata->key_power;
> +
> + if (!kp_tmp)
> + dev_err(&pdev->dev,
> + "Software power down key is not set.\n");
Why is this an error?
> +
> + onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
> + GFP_KERNEL);
> + if (!onkey) {
> + dev_err(&pdev->dev, "Failed to allocate memory.\n");
> + return -ENOMEM;
> + }
> +
> + INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
> +
> + onkey->input = devm_input_allocate_device(&pdev->dev);
> + if (!onkey->input) {
> + dev_err(&pdev->dev, "Failed to allocated input device.\n");
> + return -ENOMEM;
> + }
> +
> + irq = platform_get_irq_byname(pdev, "ONKEY");
> + if (irq < 0) {
> + dev_err(&pdev->dev, "Failed to get platform IRQ.\n");
> + return irq;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> + da9063_onkey_irq_handler,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + "ONKEY", onkey);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed to request input device IRQ.\n");
> + return ret;
> + }
> +
> + onkey->hw = da9063;
> + onkey->key_power = kp_tmp;
> + onkey->input->evbit[0] = BIT_MASK(EV_KEY);
> + onkey->input->name = DA9063_DRVNAME_ONKEY;
> + onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
> + onkey->input->dev.parent = &pdev->dev;
> +
> + if (onkey->key_power)
> + input_set_capability(onkey->input, EV_KEY, KEY_POWER);
> + input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
> +
> + ret = input_register_device(onkey->input);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed to register input device.\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, onkey);
> + return ret;
> +}
> +
> +static int da9063_onkey_remove(struct platform_device *pdev)
> +{
> + struct da9063_onkey *onkey = platform_get_drvdata(pdev);
> + cancel_delayed_work_sync(&onkey->work);
This is racy. Nothing stops IRQ from firing again and rescheduling the
work item. You are also missing canceling work item in error path pf
probe().
> + input_unregister_device(onkey->input);
> + return 0;
> +}
> +
> +static struct platform_driver da9063_onkey_driver = {
> + .probe = da9063_onkey_probe,
> + .remove = da9063_onkey_remove,
> + .driver = {
> + .name = DA9063_DRVNAME_ONKEY,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(da9063_onkey_driver);
> +
> +MODULE_AUTHOR("S Twiss <stwiss.opensource@...semi.com>");
> +MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);
> --
> end-of-patch for RFC V1
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists