early console in setup code early console in decompress_kernel KASLR using RDTSC... Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc5-next-20140306-06952-g0ffb2fe (kbuild@ant) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP PREEMPT Fri Mar 7 01:09:25 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [c00fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x133fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13800000-0x13bfffff] [ 0.000000] [mem 0x13800000-0x13bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x137fffff] [ 0.000000] [mem 0x10000000-0x137fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x12e59000, 0x12e59fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] BRK [0x12e5a000, 0x12e5afff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffff9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 10 pages/cpu @d3a29000 s26240 r0 d14720 u40960 [ 0.000000] pcpu-alloc: s26240 r0 d14720 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 13a2b580 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-an0-03070034/next:master/.vmlinuz-0ffb2fe7b9c30082876fa3a17da018bf0632cf03-20140307011128-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-an0-03070034/0ffb2fe7b9c30082876fa3a17da018bf0632cf03/vmlinuz-3.14.0-rc5-next-20140306-06952-g0ffb2fe [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 289776K/327280K available (19471K kernel code, 1291K rwdata, 8196K rodata, 800K init, 956K bss, 37504K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xff7fe000 ( 688 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xd2c49000 - 0xd2d11000 ( 800 kB) [ 0.000000] .data : 0xd230423d - 0xd2c48f20 (9491 kB) [ 0.000000] .text : 0xd1000000 - 0xd230423d (19472 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=d3408000 soft=d340a000 [ 0.000000] ACPI: Core revision 20140214 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc5-next-20140306-06952-g0ffb2fe (kbuild@ant) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP PREEMPT Fri Mar 7 01:09:25 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [c00fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x133fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13800000-0x13bfffff] [ 0.000000] [mem 0x13800000-0x13bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x137fffff] [ 0.000000] [mem 0x10000000-0x137fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x12e59000, 0x12e59fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] BRK [0x12e5a000, 0x12e5afff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffff9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 10 pages/cpu @d3a29000 s26240 r0 d14720 u40960 [ 0.000000] pcpu-alloc: s26240 r0 d14720 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 13a2b580 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-an0-03070034/next:master/.vmlinuz-0ffb2fe7b9c30082876fa3a17da018bf0632cf03-20140307011128-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-an0-03070034/0ffb2fe7b9c30082876fa3a17da018bf0632cf03/vmlinuz-3.14.0-rc5-next-20140306-06952-g0ffb2fe [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 289776K/327280K available (19471K kernel code, 1291K rwdata, 8196K rodata, 800K init, 956K bss, 37504K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xff7fe000 ( 688 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xd2c49000 - 0xd2d11000 ( 800 kB) [ 0.000000] .data : 0xd230423d - 0xd2c48f20 (9491 kB) [ 0.000000] .text : 0xd1000000 - 0xd230423d (19472 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=d3408000 soft=d340a000 [ 0.000000] ACPI: Core revision 20140214 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2493.918 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 4987.83 BogoMIPS (lpj=9975672) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] Security Framework initialized [ 0.008000] Yama: becoming mindful. [ 0.008000] Mount-cache hash table entries: 512 [ 0.008221] Initializing cgroup subsys net_cls [ 0.008911] Initializing cgroup subsys blkio [ 0.009575] Initializing cgroup subsys perf_event [ 0.010289] Initializing cgroup subsys net_prio [ 0.010976] Initializing cgroup subsys hugetlb [ 0.011716] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011716] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.011716] tlb_flushall_shift: 6 [ 0.014084] Freeing SMP alternatives memory: 44K (d2d11000 - d2d1c000) [ 0.018920] Getting VERSION: 50014 [ 0.020008] Getting VERSION: 50014 [ 0.020573] Getting ID: 0 [ 0.021066] Getting ID: f000000 [ 0.021619] Getting LVT0: 8700 [ 0.022152] Getting LVT1: 8400 [ 0.022690] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.023481] enabled ExtINT on CPU#0 [ 0.024688] ENABLING IO-APIC IRQs [ 0.025244] init IO_APIC IRQs [ 0.025779] apic 0 pin 0 not connected [ 0.026389] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.028018] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.029223] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.030434] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.031635] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.032016] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.033226] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.034423] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.036016] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.037218] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.038446] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.040016] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.041231] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.042446] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.043660] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.044015] apic 0 pin 16 not connected [ 0.044631] apic 0 pin 17 not connected [ 0.045252] apic 0 pin 18 not connected [ 0.045873] apic 0 pin 19 not connected [ 0.046492] apic 0 pin 20 not connected [ 0.048003] apic 0 pin 21 not connected [ 0.048622] apic 0 pin 22 not connected [ 0.049241] apic 0 pin 23 not connected [ 0.050003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050946] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.052815] Using local APIC timer interrupts. [ 0.052815] calibrating APIC timer ... [ 0.056000] ... lapic delta = 6250022 [ 0.056000] ... PM-Timer delta = 357969 [ 0.056000] ... PM-Timer result ok [ 0.056000] ..... delta 6250022 [ 0.056000] ..... mult: 268436400 [ 0.056000] ..... calibration result: 4000014 [ 0.056000] ..... CPU clock speed is 2494.0311 MHz. [ 0.056000] ..... host bus clock speed is 1000.0014 MHz. [ 0.056037] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.080137] CPU 1 irqstacks, hard=d347a000 soft=d347c000 [ 0.081044] x86: Booting SMP configuration: [ 0.081760] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.008000] kvm-clock: cpu 1, msr 0:13ffd021, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.096027] x86: Booted up 1 node, 2 CPUs [ 0.096018] KVM setup async PF for cpu 1 [ 0.096018] kvm-stealtime: cpu 1, msr 13a35580 [ 0.100003] smpboot: Total of 2 processors activated (9975.67 BogoMIPS) [ 0.101584] devtmpfs: initialized [ 0.104120] prandom: seed boundary self test passed [ 0.105289] prandom: 100 self tests passed [ 0.105920] pinctrl core: initialized pinctrl subsystem [ 0.106777] regulator-dummy: no parameters [ 0.107483] NET: Registered protocol family 16 [ 0.108869] EISA bus registered [ 0.109414] cpuidle: using governor ladder [ 0.110793] ACPI: bus type PCI registered [ 0.111488] PCI: Using configuration type 1 for base access [ 0.120995] gpio-f7188x: Not a Fintek device at 0x0000002e [ 0.121792] gpio-f7188x: Not a Fintek device at 0x0000004e [ 0.122660] ACPI: Added _OSI(Module Device) [ 0.123303] ACPI: Added _OSI(Processor Device) [ 0.123973] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.124003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128545] ACPI: Interpreter enabled [ 0.129142] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.130587] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.132013] ACPI: (supports S0 S3 S5) [ 0.132599] ACPI: Using IOAPIC for interrupt routing [ 0.133332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.139027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.139903] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.140011] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.141181] PCI host bridge to bus 0000:00 [ 0.141828] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.142603] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.144004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.144844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.145762] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.146708] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.148191] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.149449] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.152438] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.154263] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.155361] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.156012] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.157196] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.160552] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.164043] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.170648] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.172102] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.173764] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.175439] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.180004] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.181149] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.182430] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.186449] pci_bus 0000:00: on NUMA node 0 [ 0.187564] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.188716] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.189938] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.191184] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.192463] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.193865] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.195238] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196003] vgaarb: loaded [ 0.196491] vgaarb: bridge control possible 0000:00:02.0 [ 0.197589] SCSI subsystem initialized [ 0.198236] libata version 3.00 loaded. [ 0.198898] ACPI: bus type USB registered [ 0.200041] usbcore: registered new interface driver usbfs [ 0.200838] usbcore: registered new interface driver hub [ 0.201749] usbcore: registered new device driver usb [ 0.202584] media: Linux media interface: v0.10 [ 0.203274] Linux video capture interface: v2.00 [ 0.204008] pps_core: LinuxPPS API ver. 1 registered [ 0.204735] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.206043] PTP clock support registered [ 0.206932] Advanced Linux Sound Architecture Driver Initialized. [ 0.207791] PCI: Using ACPI for IRQ routing [ 0.208006] PCI: pci_cache_line_size set to 64 bytes [ 0.208822] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.209654] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.210711] irda_init() [ 0.211214] NET: Registered protocol family 23 [ 0.212032] NET: Registered protocol family 8 [ 0.212696] NET: Registered protocol family 20 [ 0.214323] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.215284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216491] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.219619] Switched to clocksource kvm-clock [ 0.219619] pnp: PnP ACPI init [ 0.219619] ACPI: bus type PNP registered [ 0.219619] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.219619] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220229] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.221466] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.222388] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.223628] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.224575] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.227475] pnp 00:03: [dma 2] [ 0.228039] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.228983] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.230220] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.231175] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.232420] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.233522] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.234591] pnp: PnP ACPI: found 7 devices [ 0.235233] ACPI: bus type PNP unregistered [ 0.517845] mdacon: MDA with 8K of memory detected. [ 0.517877] Console: switching consoles 13-16 to MDA-2 [ 0.554012] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.554801] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.555581] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.556444] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.557317] NET: Registered protocol family 1 [ 0.557990] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.558823] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.559631] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.560499] pci 0000:00:02.0: Boot video device [ 0.561202] PCI: CLS 0 bytes, default 64 [ 0.561922] Unpacking initramfs... [ 0.631823] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000) [ 0.633871] apm: BIOS not found. [ 0.634718] cryptomgr_test (26) used greatest stack depth: 7224 bytes left [ 0.635793] PCLMULQDQ-NI instructions are not detected. [ 0.636560] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 0.637897] NatSemi SCx200 Driver [ 0.639106] Initializing RT-Tester: OK [ 0.639718] spin_lock-torture:--- Start of test: nwriters_stress=4 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 0.641808] spin_lock-torture: Creating torture_shuffle task [ 0.642659] spin_lock-torture: Creating torture_stutter task [ 0.643474] spin_lock-torture: torture_shuffle task started [ 0.644273] spin_lock-torture: Creating lock_torture_writer task [ 0.644324] spin_lock-torture: torture_stutter task started [ 0.645977] spin_lock-torture: Creating lock_torture_writer task [ 0.646840] spin_lock-torture: lock_torture_writer task started [ 0.647669] spin_lock-torture: Creating lock_torture_writer task [ 0.647705] spin_lock-torture: lock_torture_writer task started [ 0.649401] spin_lock-torture: Creating lock_torture_writer task [ 0.650246] spin_lock-torture: lock_torture_writer task started [ 0.651095] spin_lock-torture: Creating lock_torture_stats task [ 0.651128] spin_lock-torture: lock_torture_writer task started [ 0.652998] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.653890] Initialise system trusted keyring [ 0.654700] spin_lock-torture: lock_torture_stats task started [ 0.655563] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.659830] VFS: Disk quotas dquot_6.5.2 [ 0.660547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.662261] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.663843] NTFS driver 2.1.30 [Flags: R/O DEBUG]. [ 0.664704] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 0.665498] jffs2: version 2.2. [ 0.666632] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.667418] QNX4 filesystem 0.2.3 registered. [ 0.668168] QNX6 filesystem 1.0.0 registered. [ 0.668950] fuse init (API version 7.22) [ 0.670025] NILFS version 2 loaded [ 0.670929] OCFS2 User DLM kernel interface loaded [ 0.672470] GFS2 installed [ 0.673083] Key type big_key registered [ 0.674155] cryptomgr_test (57) used greatest stack depth: 6848 bytes left [ 0.675655] cryptomgr_test (63) used greatest stack depth: 6764 bytes left [ 0.676647] cryptomgr_test (64) used greatest stack depth: 6708 bytes left [ 0.677725] cryptomgr_test (65) used greatest stack depth: 6472 bytes left [ 0.678785] cryptomgr_test (66) used greatest stack depth: 6384 bytes left [ 0.682378] alg: No test for lz4 (lz4-generic) [ 0.683167] alg: No test for lz4hc (lz4hc-generic) [ 0.683978] alg: No test for stdrng (krng) [ 0.687883] NET: Registered protocol family 38 [ 0.688584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.689709] io scheduler noop registered [ 0.690328] io scheduler deadline registered [ 0.691090] io scheduler cfq registered (default) [ 0.691803] test_string_helpers: Running tests... [ 0.692574] rbtree testing -> 9445 cycles [ 1.102242] augmented rbtree testing -> 11988 cycles [ 1.623060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.623874] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.624789] Console: switching consoles 13-16 to MDA-2 [ 1.625667] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 1.626444] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 1.627436] vmlfb: initializing [ 1.628071] hgafb: HGA card not detected. [ 1.628707] hgafb: probe of hgafb.0 failed with error -22 [ 1.629665] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 1.631034] fbcon: CL Picasso4 (fb0) is primary device [ 1.632390] tsc: Refined TSC clocksource calibration: 2493.956 MHz [ 1.969637] Console: switching to colour frame buffer device 80x30 [ 2.045103] usbcore: registered new interface driver smscufx [ 2.050847] uvesafb: VGABIOS Cirrus extension, VGABIOS Cirrus extension, 1.0, OEM: VGABIOS Cirrus extension, VBE v2.0 [ 2.219431] uvesafb: no monitor limits have been set, default refresh rate will be used [ 2.533474] uvesafb: VBE state buffer size cannot be determined (eax=0x14f, err=0) [ 2.875389] uvesafb: scrolling: redraw [ 3.051237] uvesafb: request region 0x3c0-0x3e0 failed [ 3.223082] uvesafb: probe of uvesafb.0 failed with error -5 [ 3.388862] ipmi message handler version 39.2 [ 3.553519] ipmi device interface [ 3.719380] IPMI System Interface driver. [ 3.886295] ipmi_si: Adding default-specified kcs state machine [ 4.057777] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 4.404806] ipmi_si: Interface detection failed [ 4.592440] ipmi_si: Adding default-specified smic state machine [ 4.771182] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 5.125252] ipmi_si: Interface detection failed [ 5.312454] ipmi_si: Adding default-specified bt state machine [ 5.493924] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 5.851912] ipmi_si: Interface detection failed [ 6.040598] ipmi_si: Unable to find any System Interface(s) [ 6.212961] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 6.559068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 6.910831] ACPI: Power Button [PWRF] [ 7.087701] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 7.266314] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 7.461377] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 7.807997] serial: Freescale lpuart driver [ 7.979059] Initializing Nozomi driver 2.1d [ 8.146841] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 8.323236] ac.o: No PCI boards found. [ 8.323238] ac.o: For an ISA board you must supply memory and irq parameters. [ 8.325355] Non-volatile memory driver v1.3 [ 8.325361] toshiba: not a supported Toshiba laptop [ 8.325540] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 8.325782] platform pc8736x_gpio.0: no device found [ 8.325807] nsc_gpio initializing [ 8.325823] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 8.326761] smapi::smapi_init, ERROR invalid usSmapiID [ 8.326765] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 8.326767] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 8.326768] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 8.327025] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 8.327037] Hangcheck: Using getrawmonotonic(). [ 8.328213] [drm] Initialized drm 1.1.0 20060810 [ 8.328322] [drm] radeon kernel modesetting enabled. [ 8.328788] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 8.328841] dummy-irq: no IRQ given. Use irq=N [ 8.328915] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 8.329068] c2port c2port0: C2 port uc added [ 8.329070] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 8.329646] Guest personality initialized and is inactive [ 8.329855] VMCI host device registered (name=vmci, major=10, minor=61) [ 8.329856] Initialized host personality [ 8.329904] usbcore: registered new interface driver rtsx_usb [ 8.330611] usbcore: registered new interface driver viperboard [ 8.331514] Loading iSCSI transport class v2.0-870. [ 8.331931] rdac: device handler registered [ 8.331967] hp_sw: device handler registered [ 8.331968] emc: device handler registered [ 8.348791] fnic: Cisco FCoE HBA Driver, ver 1.5.0.45 [ 8.349303] fnic: Successfully Initialized Trace Buffer [ 8.350156] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013) [ 8.375878] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 8.376963] scsi: Detection failed (no card) [ 8.377391] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options [ 8.377393] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 8.377728] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 [ 8.377769] csiostor: Chelsio FCoE driver 1.0.0 [ 8.408734] Failed initialization of WD-7000 SCSI card! [ 13.519825] DC390: clustering now enabled by default. If you get problems load [ 13.519826] with "disable_clustering=1" and report to maintainers [ 13.519839] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 13.519879] mpt2sas version 16.100.00.00 loaded [ 13.520803] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 13.520855] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 13.520872] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 13.520886] nsp32: loading... [ 13.520899] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) [ 13.520916] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 13.521461] iscsi: registered transport (be2iscsi) [ 13.521468] In beiscsi_module_init, tt=d2b7cfc0 [ 13.521559] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 13.521681] VMware PVSCSI driver - version 1.0.2.0-k [ 13.521700] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 13.521842] SCSI Media Changer driver v0.25 [ 13.523344] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 13.525706] mtdoops: mtd device (mtddev=name/number) must be supplied [ 13.525710] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver [ 13.525802] slram: not enough parameters. [ 13.525803] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 13.525805] pmc551: not detected [ 13.525819] HSI/SSI char device loaded [ 13.528273] tun: Universal TUN/TAP device driver, 1.6 [ 13.528275] tun: (C) 1999-2004 Max Krasnyansky [ 13.528596] arcnet loaded. [ 13.528600] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 13.528601] arcnet: cap mode (`c') encapsulation support loaded. [ 13.528624] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 13.528624] E-mail me if you actually test this driver, please! [ 13.528626] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 13.528643] arcnet: COM20020 ISA support (by David Woodhouse et al.) [ 13.528644] arc%d: No autoprobe (yet) for IO mapped cards; you must specify the base address! [ 13.528645] arcnet: COM20020 PCI support [ 13.529294] vcan: Virtual CAN interface driver [ 13.529298] slcan: serial line CAN interface driver [ 13.529300] slcan: 10 dynamic interface channels. [ 13.529320] CAN device driver interface [ 13.529376] usbcore: registered new interface driver esd_usb2 [ 13.529392] usbcore: registered new interface driver peak_usb [ 13.529473] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 13.529475] Copyright (c) 2007 Atheros Corporation. [ 13.529554] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.19 (December 19, 2013) [ 13.529730] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 13.530411] Brocade 10G Ethernet driver - version: 3.2.23.0 [ 13.530470] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.50 [ 13.530533] vxge: Copyright(c) 2002-2010 Exar Corp. [ 13.530535] vxge: Driver version: 2.5.3.22640-k [ 13.530557] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 13.530558] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 13.532329] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 13.532366] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 15.650042] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 15.650090] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 15.650549] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 15.650551] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 15.650619] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 15.650620] igb: Copyright (c) 2007-2014 Intel Corporation. [ 15.650642] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 15.650643] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 15.650656] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k [ 15.650656] ixgbe: Copyright (c) 1999-2014 Intel Corporation. [ 15.650743] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k [ 15.650745] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 15.650762] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.3.32-k [ 15.650764] i40e: Copyright (c) 2013 - 2014 Intel Corporation. [ 15.650795] i40evf: Intel(R) XL710 X710 Virtual Function Network Driver - version 0.9.13 [ 15.650797] Copyright (c) 2013 - 2014 Intel Corporation. [ 15.650849] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 15.650974] Solarflare NET driver v4.0 [ 15.651278] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 15.651280] tehuti: Options: hw_csum [ 15.651503] AX.25: Z8530 SCC driver version 3.0.dl1bke [ 15.652065] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 15.652073] AX.25: 6pack driver, Revision: 0.3.0 [ 15.652082] AX.25: bpqether driver version 004 [ 15.652084] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 15.652084] baycom_ser_fdx: version 0.10 [ 15.652497] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 15.652498] hdlcdrv: version 0.8 [ 15.652498] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 15.652498] baycom_ser_hdx: version 0.10 [ 15.653597] usbcore: registered new interface driver irda-usb [ 15.653611] usbcore: registered new interface driver stir4200 [ 15.653613] w83977af_init() [ 15.653614] w83977af_open() [ 15.653626] w83977af_probe() [ 15.654559] w83977af_probe(), Wrong chip version [ 15.654559] w83977af_probe() [ 15.659267] w83977af_probe(), Wrong chip version [ 15.659269] usbcore: registered new interface driver mcs7780 [ 15.659459] usbcore: registered new interface driver ksdazzle-sir [ 15.659468] usbcore: registered new interface driver ks959-sir [ 15.659471] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 15.659532] usbcore: registered new interface driver i2400m_usb [ 15.660553] ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware [ 15.660905] ieee802154fakelb ieee802154fakelb: added ieee802154 hardware [ 15.661364] usbcore: registered new interface driver catc [ 15.661376] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 15.661443] usbcore: registered new interface driver pegasus [ 15.661455] usbcore: registered new interface driver rtl8150 [ 15.661467] usbcore: registered new interface driver r8152 [ 15.661477] usbcore: registered new interface driver cdc_ether [ 15.661486] usbcore: registered new interface driver r815x [ 15.661494] usbcore: registered new interface driver cdc_eem [ 15.661502] usbcore: registered new interface driver dm9601 [ 15.661512] usbcore: registered new interface driver CoreChips [ 15.661520] usbcore: registered new interface driver gl620a [ 15.661537] usbcore: registered new interface driver net1080 [ 15.661546] usbcore: registered new interface driver rndis_host [ 15.661562] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 15.661586] usbcore: registered new interface driver int51x1 [ 15.661594] usbcore: registered new interface driver cdc_phonet [ 15.661602] usbcore: registered new interface driver kalmia [ 15.661611] usbcore: registered new interface driver ipheth [ 15.661617] usbcore: registered new interface driver sierra_net [ 15.661625] usbcore: registered new interface driver cdc_ncm [ 15.661633] usbcore: registered new interface driver lg-vl600 [ 15.661945] usbcore: registered new interface driver hwa-rc [ 15.661959] usbcore: registered new interface driver i1480-dfu-usb [ 15.661992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.662004] ehci-pci: EHCI PCI platform driver [ 15.662022] ehci-platform: EHCI generic platform driver [ 15.662062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 15.662071] ohci-platform: OHCI generic platform driver [ 15.662086] uhci_hcd: USB Universal Host Controller Interface driver [ 15.662813] usbcore: registered new interface driver hwa-hc [ 15.662832] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 15.662833] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 15.663093] usbcore: registered new interface driver wusb-cbaf [ 15.663118] usbcore: registered new interface driver cdc_acm [ 15.663121] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 15.663133] usbcore: registered new interface driver usblp [ 15.663142] usbcore: registered new interface driver usbtmc [ 15.663156] usbcore: registered new interface driver usb-storage [ 15.663167] usbcore: registered new interface driver ums-alauda [ 15.663174] usbcore: registered new interface driver ums-datafab [ 15.663181] usbcore: registered new interface driver ums-freecom [ 15.663188] usbcore: registered new interface driver ums-isd200 [ 15.663194] usbcore: registered new interface driver ums-jumpshot [ 15.663201] usbcore: registered new interface driver ums-karma [ 15.663208] usbcore: registered new interface driver ums-onetouch [ 15.663216] usbcore: registered new interface driver ums-realtek [ 15.663226] usbcore: registered new interface driver ums-sddr09 [ 15.663234] usbcore: registered new interface driver ums-sddr55 [ 15.663242] usbcore: registered new interface driver ums-usbat [ 15.663255] usbcore: registered new interface driver mdc800 [ 15.663257] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 15.663271] usbcore: registered new interface driver adutux [ 15.663311] usbcore: registered new interface driver appledisplay [ 15.663320] usbcore: registered new interface driver emi26 - firmware loader [ 15.663335] usbcore: registered new interface driver emi62 - firmware loader [ 15.663335] driver ftdi-elan [ 15.663439] usbcore: registered new interface driver ftdi-elan [ 15.663641] usbcore: registered new interface driver idmouse [ 15.663916] usbcore: registered new interface driver iowarrior [ 15.663933] usbcore: registered new interface driver isight_firmware [ 15.663944] usbcore: registered new interface driver usblcd [ 15.663953] usbcore: registered new interface driver ldusb [ 15.663995] usbcore: registered new interface driver usbled [ 15.664009] usbcore: registered new interface driver legousbtower [ 15.664018] usbcore: registered new interface driver rio500 [ 15.664028] usbcore: registered new interface driver usbtest [ 15.664044] usbcore: registered new interface driver usb_ehset_test [ 15.664055] usbcore: registered new interface driver trancevibrator [ 15.664066] usbcore: registered new interface driver usbsevseg [ 15.664162] usbcore: registered new interface driver sisusb [ 15.664223] usbcore: registered new interface driver cxacru [ 15.664232] usbcore: registered new interface driver ueagle-atm [ 15.664637] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 15.708978] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.709186] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.709632] mousedev: PS/2 mouse device common for all mice [ 15.709641] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 15.711123] usbcore: registered new interface driver appletouch [ 15.711380] inport.c: Didn't find InPort mouse at 0x23c [ 15.712110] logibm.c: Didn't find Logitech busmouse at 0x23c [ 15.713077] usbcore: registered new interface driver synaptics_usb [ 15.713255] usbcore: registered new interface driver iforce [ 15.713340] usbcore: registered new interface driver xpad [ 15.713364] usbcore: registered new interface driver usb_acecad [ 15.713373] usbcore: registered new interface driver gtco [ 15.713384] usbcore: registered new interface driver hanwang [ 15.713393] usbcore: registered new interface driver wacom [ 15.713942] mk712: device not present [ 15.713974] usbcore: registered new interface driver usbtouchscreen [ 15.714675] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 15.714713] usbcore: registered new interface driver ati_remote2 [ 15.714811] usbcore: registered new interface driver keyspan_remote [ 15.714851] usbcore: registered new interface driver powermate [ 15.715139] wistron_btns: System unknown [ 15.715152] usbcore: registered new interface driver yealink [ 15.715155] ideapad_slidebar: DMI does not match [ 15.715403] rtc_cmos 00:00: RTC can wake from S4 [ 15.717765] rtc (null): alarm rollover: day [ 15.719613] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 15.721706] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 15.722565] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 15.737520] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF [ 15.737561] usbcore: registered new interface driver i2c-tiny-usb [ 15.737642] isa i2c-pca-isa.0: Please specify I/O base [ 15.737864] Marvell M88ALP01 'CAFE' Camera Controller version 2 [ 15.738798] m2m-testdev m2m-testdev.0: Device registered as /dev/video0 [ 15.738938] PMS: not enabled, use pms.enable=1 to probe [ 15.739017] pps pps0: new PPS source ktimer [ 15.739021] pps pps0: ktimer PPS source registered [ 15.739065] Driver for 1-wire Dallas network protocol. [ 15.739137] usbcore: registered new interface driver DS9490R [ 15.739159] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 15.739186] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 15.922472] hpet1: lost 11 rtc interrupts [ 16.320817] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 16.321416] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 16.321785] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 16.354126] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [ 16.354143] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. [ 16.585168] i2c i2c-0: detect fail: address match, 0x2c [ 16.600941] i2c i2c-0: detect fail: address match, 0x2d [ 16.616816] i2c i2c-0: detect fail: address match, 0x2e [ 16.632966] i2c i2c-0: detect fail: address match, 0x2f [ 16.760965] applesmc: supported laptop not found! [ 16.761011] applesmc: driver init failed (ret=-19)! [ 24.297006] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 24.297290] acquirewdt: WDT driver for Acquire single board computer initialising [ 24.298017] acquirewdt: I/O address 0x0043 already in use [ 24.298026] acquirewdt: probe of acquirewdt failed with error -5 [ 24.298050] alim7101_wdt: Steve Hill [ 24.298051] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 24.298487] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1) [ 24.298493] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 24.298497] wafer5823wdt: cannot register miscdev on minor=130 (err=-16) [ 24.298570] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 24.299586] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 24.300424] i6300ESB timer: probe of 0000:00:04.0 failed with error -16 [ 24.301268] it87_wdt: no device [ 24.301743] sc1200wdt: build 20020303 [ 24.301789] sc1200wdt: io parameter must be specified [ 24.301804] pc87413_wdt: Version 1.1 at io 0x2E [ 24.301826] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 24.301830] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 24.302121] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16) [ 24.302435] cpu5wdt: misc_register failed [ 24.303131] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 24.304749] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 24.305268] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 24.305294] w83697hf_wdt: watchdog not found at address 0x2e [ 24.305295] w83697hf_wdt: No W83697HF/HG could be found [ 24.305298] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 24.305310] w83697ug_wdt: No W83697UG/UF could be found [ 24.305319] w83877f_wdt: cannot register miscdev on minor=130 (err=-16) [ 24.305567] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 24.305569] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 24.305752] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 24.311102] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 24.311117] Modular ISDN core version 1.1.29 [ 24.311439] NET: Registered protocol family 34 [ 24.311442] DSP module 2.0 [ 24.311444] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies. [ 24.313881] usbcore: registered new interface driver HFC-S_USB [ 24.313886] AVM Fritz PCI driver Rev. 2.3 [ 24.313940] Winbond W6692 PCI driver Rev. 2.0 [ 24.313955] mISDNipac module version 2.0 [ 24.313956] PCBIT-D device driver v 0.5-fjpc0 19991204 - Copyright (C) 1996 Universidade de Lisboa [ 24.313956] Trying to detect board using default settings [ 24.314066] SpellCaster ISA ISDN Adapter Driver rev. 2.0b1 [ 24.314066] Copyright (C) 1996 SpellCaster Telecommunications Inc. [ 24.317585] Failed to find any adapters, driver unloaded [ 24.317594] IBM Active 2000 ISDN driver [ 24.318769] act2000: No cards defined yet [ 24.319030] gigaset: Driver for Gigaset 307x (debug build) [ 24.319042] gigaset: ISDN4Linux interface [ 24.319228] usbcore: registered new interface driver usb_gigaset [ 24.319229] usb_gigaset: USB Driver for Gigaset 307x using M105 [ 24.319248] usbcore: registered new interface driver bas_gigaset [ 24.319249] bas_gigaset: USB Driver for Gigaset 307x [ 24.319332] lguest: switcher text too large (4384) [ 24.319360] cpufreq-nforce2: No nForce2 chipset. [ 24.319432] sdhci: Secure Digital Host Controller Interface driver [ 24.319433] sdhci: Copyright(c) Pierre Ossman [ 24.319464] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 24.319465] wbsd: Copyright(c) Pierre Ossman [ 24.319832] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 24.319832] usbcore: registered new interface driver vub300 [ 24.319851] sdhci-pltfm: SDHCI platform and OF driver helper [ 24.320670] leds_ss4200: no LED devices found [ 24.320868] ledtrig-cpu: registered to indicate activity on CPUs [ 24.321657] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 24.321827] Driver for HIFN 795x crypto accelerator chip has been successfully registered. [ 24.321867] hidraw: raw HID events driver (C) Jiri Kosina [ 24.323098] usbip_core: USB/IP Core v1.0.0 [ 24.323393] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 24.323404] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1 [ 24.324599] hub 1-0:1.0: USB hub found [ 24.324684] hub 1-0:1.0: 8 ports detected [ 24.325041] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 24.325097] usbcore: registered new interface driver rts5139 [ 24.325116] usbcore: registered new interface driver line6usb [ 24.325118] vme_user: VME User Space Access Driver [ 24.325118] vme_user: No cards, skipping registration [ 24.325864] Loading crystalhd 0.9.27 [ 24.325931] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45 [ 24.325932] Copyright 2010. Beceem Communications Inc [ 24.325974] usbcore: registered new interface driver usbbcm [ 24.326114] input: Speakup as /devices/virtual/input/input4 [ 24.326133] evbug: Connected device: input4 (Speakup at speakup/input0) [ 24.326371] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 24.326895] speakup 3.1.6: initialized [ 24.326896] synth name on entry is: (null) [ 24.327142] usbcore: registered new interface driver cedusb [ 24.327360] dgnc: dgnc-1.3-16, Digi International Part Number 40002369_F [ 24.327361] dgnc: For the tools package or updated drivers please visit http://www.digi.com [ 24.327537] dgap-1.3-16, Digi International Part Number 40002347_C [ 24.327540] For the tools package please visit http://www.digi.com [ 24.327607] FPGA DOWNLOAD ---> [ 24.327608] built at Fri Mar 7 00:36:07 2014 UTC [ 24.327608] FPGA image file name: xlinx_fpga_firmware.bit [ 24.328303] GPIO INIT FAIL!! [ 24.328529] acerhdf: Acer Aspire One Fan driver, v.0.5.26 [ 24.328544] acerhdf: unknown (unsupported) BIOS version Bochs/Bochs/Bochs, please report, aborting! [ 24.328545] Initializing HPQ6001 module [ 24.328571] hdaps: supported laptop not found! [ 24.328572] hdaps: driver init failed (ret=-19)! [ 24.328577] fujitsu_tablet: Unknown (using defaults) [ 24.329997] fake-fmc-carrier: mezzanine 0 [ 24.330002] Manufacturer: fake-vendor [ 24.330003] Product name: fake-design-for-testing [ 24.330032] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 24.330054] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95 [ 24.330062] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 24.330070] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 24.330516] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 24.330796] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 24.330861] intel_rapl: driver does not support CPU family 15 model 6 [ 24.336028] no UART detected at 0x1 [ 24.340106] Motu MidiTimePiece on parallel port irq: 7 ioport: 0x378 [ 24.340640] usbcore: registered new interface driver snd-usb-audio [ 24.340700] usbcore: registered new interface driver snd-usb-usx2y [ 24.340827] usbcore: registered new interface driver snd-usb-us122l [ 24.340841] usbcore: registered new interface driver snd-usb-caiaq [ 24.342390] NET: Registered protocol family 26 [ 24.342397] GACT probability on [ 24.343090] netem: version 1.3 [ 24.343195] u32 classifier [ 24.343197] Performance counters on [ 24.343197] Actions configured [ 24.343275] NET: Registered protocol family 15 [ 24.344617] NET: Registered protocol family 6 [ 24.346337] NET: Registered protocol family 11 [ 24.346849] NET: Registered protocol family 3 [ 24.346898] can: controller area network core (rev 20120528 abi 9) [ 24.347026] NET: Registered protocol family 29 [ 24.347030] can: raw protocol (rev 20120528) [ 24.347033] can: netlink gateway (rev 20130117) max_hops=1 [ 24.347494] lec:lane_module_init: lec.c: initialized [ 24.347496] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 24.347572] DECnet: Routing cache hash table of 512 buckets, 10Kbytes [ 24.347585] NET: Registered protocol family 12 [ 24.347606] NET: Registered protocol family 35 [ 24.347633] 8021q: 802.1Q VLAN Support v1.8 [ 24.347667] 9pnet: Installing 9P2000 support [ 24.347707] NET: Registered protocol family 37 [ 24.347731] NET: Registered protocol family 36 [ 24.348168] Key type dns_resolver registered [ 24.348580] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded [ 24.348582] openvswitch: Open vSwitch switching datapath [ 24.350250] [ 24.350250] printing PIC contents [ 24.350264] ... PIC IMR: ffff [ 24.350268] ... PIC IRR: 1113 [ 24.350275] ... PIC ISR: 0000 [ 24.350279] ... PIC ELCR: 0c00 [ 24.350298] printing local APIC contents on CPU#0/0: [ 24.350301] ... APIC ID: 00000000 (0) [ 24.350304] ... APIC VERSION: 00050014 [ 24.350306] ... APIC TASKPRI: 00000000 (00) [ 24.350310] ... APIC PROCPRI: 00000000 [ 24.350311] ... APIC LDR: 01000000 [ 24.350312] ... APIC DFR: ffffffff [ 24.350313] ... APIC SPIV: 000001ff [ 24.350313] ... APIC ISR field: [ 24.350323] 0000000000000000000000000000000000000000000000000000000000000000 [ 24.350323] ... APIC TMR field: [ 24.350328] 0000000002200000000000000000000000000000000000000000000000000000 [ 24.350329] ... APIC IRR field: [ 24.350335] 0000000000000000000000000000000000000000000000000000000000000000 [ 24.350337] ... APIC ESR: 00000000 [ 24.350338] ... APIC ICR: 000008fd [ 24.350339] ... APIC ICR2: 02000000 [ 24.350340] ... APIC LVTT: 000200ef [ 24.350341] ... APIC LVTPC: 00010000 [ 24.350342] ... APIC LVT0: 00010700 [ 24.350343] ... APIC LVT1: 00000400 [ 24.350344] ... APIC LVTERR: 000000fe [ 24.350345] ... APIC TMICT: 0003d090 [ 24.350348] ... APIC TMCCT: 000240a0 [ 24.350348] ... APIC TDCR: 00000003 [ 24.350349] [ 24.350350] number of MP IRQ sources: 15. [ 24.350352] number of IO-APIC #0 registers: 24. [ 24.350352] testing the IO APIC....................... [ 24.350368] IO APIC #0...... [ 24.350368] .... register #00: 00000000 [ 24.350368] ....... : physical APIC id: 00 [ 24.350369] ....... : Delivery Type: 0 [ 24.350369] ....... : LTS : 0 [ 24.350370] .... register #01: 00170011 [ 24.350370] ....... : max redirection entries: 17 [ 24.350370] ....... : PRQ implemented: 0 [ 24.350371] ....... : IO APIC version: 11 [ 24.350371] .... register #02: 00000000 [ 24.350371] ....... : arbitration: 00 [ 24.350372] .... IRQ redirection table: [ 24.350381] 1 0 0 0 0 0 0 00 [ 24.350389] 0 0 0 0 0 1 1 31 [ 24.350398] 0 0 0 0 0 1 1 30 [ 24.350406] 0 0 0 0 0 1 1 33 [ 24.350414] 1 0 0 0 0 1 1 34 [ 24.350422] 0 1 0 0 0 1 1 35 [ 24.350429] 0 0 0 0 0 1 1 36 [ 24.350437] 0 0 0 0 0 1 1 37 [ 24.350445] 0 0 0 0 0 1 1 38 [ 24.350453] 0 1 0 0 0 1 1 39 [ 24.350461] 1 1 0 0 0 1 1 3A [ 24.350471] 1 1 0 0 0 1 1 3B [ 24.350479] 0 0 0 0 0 1 1 3C [ 24.350486] 0 0 0 0 0 1 1 3D [ 24.350494] 0 0 0 0 0 1 1 3E [ 24.350502] 0 0 0 0 0 1 1 3F [ 24.350510] 1 0 0 0 0 0 0 00 [ 24.350517] 1 0 0 0 0 0 0 00 [ 24.350525] 1 0 0 0 0 0 0 00 [ 24.350533] 1 0 0 0 0 0 0 00 [ 24.350540] 1 0 0 0 0 0 0 00 [ 24.350548] 1 0 0 0 0 0 0 00 [ 24.350556] 1 0 0 0 0 0 0 00 [ 24.350564] 1 0 0 0 0 0 0 00 [ 24.350564] IRQ to pin mappings: [ 24.350576] IRQ0 -> 0:2 [ 24.350576] IRQ1 -> 0:1 [ 24.350577] IRQ3 -> 0:3 [ 24.350578] IRQ4 -> 0:4 [ 24.350579] IRQ5 -> 0:5 [ 24.350579] IRQ6 -> 0:6 [ 24.350580] IRQ7 -> 0:7 [ 24.350581] IRQ8 -> 0:8 [ 24.350582] IRQ9 -> 0:9 [ 24.350582] IRQ10 -> 0:10 [ 24.350583] IRQ11 -> 0:11 [ 24.350584] IRQ12 -> 0:12 [ 24.350585] IRQ13 -> 0:13 [ 24.350586] IRQ14 -> 0:14 [ 24.350586] IRQ15 -> 0:15 [ 24.350587] .................................... done. [ 24.350589] Using IPI No-Shortcut mode [ 24.351595] Loading compiled-in X.509 certificates [ 24.352502] Key type trusted registered [ 24.352517] IMA: No TPM chip found, activating TPM-bypass! [ 70.816613] spin_lock-torture: Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 106.165399] console [netcon0] enabled [ 106.267407] netconsole: network logging started [ 106.374175] rtc_cmos 00:00: setting system clock to 2014-03-07 01:18:42 UTC (1394155122) [ 106.610519] ALSA device list: [ 106.738444] #0: Loopback 1 [ 106.867578] #1: Virtual MIDI Card 1 [ 107.002146] #2: MTPAV on parallel port at 0x378 [ 107.138481] random: nonblocking pool is initialized [ 107.276022] Freeing unused kernel memory: 800K (d2c49000 - d2d11000) [ 107.417645] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 107.703813] caller is __this_cpu_preempt_check+0x3b/0x60 [ 107.852357] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5-next-20140306-06952-g0ffb2fe #1 [ 108.157111] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 108.319103] 00000000 00000000 d343deec d22ec747 00000000 d343df10 d13efdcd d290362c [ 108.685150] d343df28 00000000 d34403d8 00000001 d343df28 d0745000 d343df58 d13efe2b [ 109.086205] d343df28 00000028 d2902c14 d2a74fc6 68745f5f 635f7369 615f7570 29286464 [ 109.512575] Call Trace: [ 109.718526] [] dump_stack+0x4b/0x75 [ 109.927550] [] check_preemption_disabled+0xcd/0xe0 [ 110.138792] [] __this_cpu_preempt_check+0x3b/0x60 [ 110.351853] [] ? preempt_count_add+0x4b/0xa0 [ 110.564753] [] kmem_cache_alloc+0xc2/0x190 [ 110.776294] [] ? getname_kernel+0x3f/0x80 [ 110.983777] [] getname_kernel+0x3f/0x80 [ 111.181555] [] run_init_process+0xd/0x20 [ 111.381971] [] kernel_init+0x32/0xe0 [ 111.578459] [] ret_from_kernel_thread+0x1b/0x30 [ 111.768674] [] ? rest_init+0x70/0x70 [ 111.959006] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 112.355107] caller is __this_cpu_preempt_check+0x3b/0x60 [ 112.553383] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5-next-20140306-06952-g0ffb2fe #1 [ 112.955533] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 113.162708] 00000000 00000000 d343deac d22ec747 00000001 d343ded0 d13efdcd d290362c [ 113.602376] d343dee8 00000000 d34403d8 00000001 d343dee8 c001b400 d343df18 d13efe2b [ 114.059422] d343dee8 00000028 d2902c14 d2a74fc6 68745f5f 635f7369 615f7570 29286464 [ 114.521193] Call Trace: [ 114.734074] [] dump_stack+0x4b/0x75 [ 114.940517] [] check_preemption_disabled+0xcd/0xe0 [ 115.142378] [] __this_cpu_preempt_check+0x3b/0x60 [ 115.341154] [] ? preempt_schedule+0x35/0x50 Elapsed time: 115 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-an0-03070034/0ffb2fe7b9c30082876fa3a17da018bf0632cf03/vmlinuz-3.14.0-rc5-next-20140306-06952-g0ffb2fe -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-an0-03070034/next:master/.vmlinuz-0ffb2fe7b9c30082876fa3a17da018bf0632cf03-20140307011128-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-an0-03070034/0ffb2fe7b9c30082876fa3a17da018bf0632cf03/vmlinuz-3.14.0-rc5-next-20140306-06952-g0ffb2fe' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::17018-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-ivytown2-18 -serial file:/dev/shm/kboot/serial-yocto-ivytown2-18 -daemonize -display none -monitor null