[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1394226207.7470.15.camel@x220>
Date: Fri, 07 Mar 2014 22:03:27 +0100
From: Paul Bolle <pebolle@...cali.nl>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Steven Newbury <steve@...wbury.org.uk>,
Daniel Vetter <daniel.vetter@...ll.ch>,
David Airlie <airlied@...ux.ie>,
intel-gfx <intel-gfx@...ts.freedesktop.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Yinghai Lu <yinghai@...nel.org>
Subject: Re: [Intel-gfx] agp/intel: can't ioremap flush page - no chipset
flushing
On Fri, 2014-03-07 at 13:40 -0700, Bjorn Helgaas wrote:
> It seems quite possible that I broke pci_bus_alloc_resource(), which could
> cause an allocation failure like this.
>
> If you have a chance to try it, here's a debug patch against v3.14-rc5. It
> should apply cleanly to 96702be56037. If you can try it, please attach the
> dmesg log to the bugzilla.
That ThinkPad X41 is now building 96702be56037. Once that build is
finished and tested I'll try your debug patch (on top of v3.14-rc5, see
later). It might take some time to finish both builds and test boots.
> diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
> index 5c85350f4c3d..0dbba6c7c001 100644
> --- a/drivers/char/agp/intel-gtt.c
> +++ b/drivers/char/agp/intel-gtt.c
> @@ -997,6 +997,7 @@ static int intel_alloc_chipset_flush_resource(void)
> ret = pci_bus_alloc_resource(intel_private.bridge_dev->bus, &intel_private.ifp_resource, PAGE_SIZE,
> PAGE_SIZE, PCIBIOS_MIN_MEM, 0,
> pcibios_align_resource, intel_private.bridge_dev);
> + dev_info(&intel_private.bridge_dev->dev, "pci_bus_alloc ret %d\n", ret);
>
> return ret;
> }
> @@ -1007,6 +1008,7 @@ static void intel_i915_setup_chipset_flush(void)
> u32 temp;
>
> pci_read_config_dword(intel_private.bridge_dev, I915_IFPADDR, &temp);
> + dev_info(&intel_private.bridge_dev->dev, "I915_IFPADDR %#010x\n", temp);
> if (!(temp & 0x1)) {
> intel_alloc_chipset_flush_resource();
> intel_private.resource_valid = 1;
> @@ -1022,6 +1024,7 @@ static void intel_i915_setup_chipset_flush(void)
> if (ret)
> intel_private.resource_valid = 0;
> }
> + dev_info(&intel_private.bridge_dev->dev, "ifp_resource %pR\n", &intel_private.ifp_resource);
> }
>
> static void intel_i965_g33_setup_chipset_flush(void)
My v3.13 based builds don't have INTEL_GTT set! My v3.14-rcy based
builds do. I have not yet investigated why that is.
(Note that the .config on that ThinkPad X41 is - in short - rebranched
from the kernel .config that is shipped for Fedora 20 every time a rc1
is released.)
> diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
> index 00660cc502c5..1c6d75ae34d9 100644
> --- a/drivers/pci/bus.c
> +++ b/drivers/pci/bus.c
> @@ -146,24 +146,31 @@ static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
>
> type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
>
> + dev_info(&bus->dev, "%s: alloc %pR size %#llx from bus region [%#010llx-%#010llx]\n", __func__, res, (long long) size, (long long) region->start, (long long) region->end);
> pci_bus_for_each_resource(bus, r, i) {
> if (!r)
> continue;
>
> /* type_mask must match */
> - if ((res->flags ^ r->flags) & type_mask)
> + if ((res->flags ^ r->flags) & type_mask) {
> + dev_info(&bus->dev, "%s: %pR: wrong type (%#lx %#lx mask %#x)\n", __func__, r, res->flags, r->flags, type_mask);
> continue;
> + }
>
> /* We cannot allocate a non-prefetching resource
> from a pre-fetching area */
> if ((r->flags & IORESOURCE_PREFETCH) &&
> - !(res->flags & IORESOURCE_PREFETCH))
> + !(res->flags & IORESOURCE_PREFETCH)) {
> + dev_info(&bus->dev, "%s: %pR: wrong prefetchability\n", __func__, r);
> continue;
> + }
>
> avail = *r;
> pci_clip_resource_to_region(bus, &avail, region);
> - if (!resource_size(&avail))
> + if (!resource_size(&avail)) {
> + dev_info(&bus->dev, "%s: %pR: no space (avail %pR)\n", __func__, r, &avail);
> continue;
> + }
>
> /*
> * "min" is typically PCIBIOS_MIN_IO or PCIBIOS_MIN_MEM to
> @@ -179,6 +186,7 @@ static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
> /* Ok, try it out.. */
> ret = allocate_resource(r, res, size, min, max,
> align, alignf, alignf_data);
> + dev_info(&bus->dev, "%s: %pR: alloc from %#llx-%#llx, ret %d\n", __func__, r, min, max, ret);
> if (ret == 0)
> return 0;
> }
Too bad drivers/pci/bus.o is built in by definition. If only one could
build a kernel without rebuilding all modules. Or is there some way to
actually do that?
Paul Bolle
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists